My friend I watch all your videos, very cool, but when you use this clip on the bumper again, face it up, it has two positions, you have less work, have a great day.

@plazatowing

4 жыл бұрын

Hello sir! I have a video outlining why the hooks should be faced down. This is very important! Take a look : Why I Pull Out Trucks Like I Do kzread.info/dash/bejne/m3aoscOjprDcZ9Y.html

@oguincheirousa2568

4 жыл бұрын

Yes of course!! Each situation, different ways to use the tools!

@rockabillypreformancerc1639

4 жыл бұрын

Brent uses the hooks facing down as when the winch puts pulling pressure on the hooks it goes through the largest surface area of the hook instead of the weaker smaller surface area of the tip of the hook it also stops the straps braking away from the hooks as it slides up when pulled on

@woodman3651

4 жыл бұрын

The next time you use your pull pins maybe use the electrical tape and wrap it over and under. Great videos!🤙

1 thing better than a good looking truck is the man that helps to make that truck a good looking truck.

Nice recovery Trent. It always amazes me on how many drivers have no clue how to lock their differential in or where the switch or switches are at. If he had locked in prior to getting stuck he might have drove through there without getting stuck. Stay safe..

Another nice job! Always keep that excitement about your family’s business. You’ve got a good thing going, treasure it. Now go give the old man a hug, thank him, and tell him you love him! Keep it simple. Another Dad watching you

Jayzus when the trucker has to be told to use the diff-lock

Belated Happy Birthday! I wish i was 21 again, just turned 53 and if i knew all the things i know now i would have done almost everything different!!

@maynardholmes8870

4 жыл бұрын

Harris Jessop same here I started trucking just about the time the doctor told his parents it’s a boy 😂when I was his age I was still out to sea onboard a carrier no regrets other than managing funds better but on can have all the toys and money in the world and not make to 53 like you and me we are in the 5 th inning bro hope we make all 9

"I've pulled a lot of trucks out of there over the years" You crack me up 21 and sounding like father time.

@plazatowing

4 жыл бұрын

Haha! I have an old soul! Thank you for watching!

We love your videos. Keep them coming and stay safe.

“Put things away for me” Done! And I wiped the dust off the cable too!

@plazatowing

4 жыл бұрын

why thank you! Thank you for watching!

Nice wheels! Your paint scheme is really sweet!

awesome video love the rotator keep them coming

Another great one. Yes, I put everything back. But, I left the surgical glove in the dirt. Figured someone else can have it! Thanks for the video!

Great job Trent 👍

Good video. At least it wasnt a muddy mess. Keep up the good work from nc.

Wow that sand is so soft, that has to be so strange to work in! No wonder the truck got stuck! Very good technique here.

Del Taco strikes again!

@adrianbaja1978

4 жыл бұрын

Someone probably earn a commission in tacoshop

NOW THATS A RIG I WOULD DRIVE. THATS A BEAUTIFUL TRUCK

Happy belated birthday 🎂. It amazes me how clean your equipment is. That in itself is a full-time job. Keeping my Freightliner clean is a ton of work,but I'm a clean freak. Keep up the great videos, always enjoy watching you guys work. And I'm a big fan of that silver and blue Pete you have.

@plazatowing

4 жыл бұрын

I am a clean freak as well! Thank you for watching!

Send it bro! happy Saturday!

Trent , nice textbook winch out !!!

Easy pull out GodBless you and your family.

Hey my friend I DNT drive a truck but I love your videos watch them all the time keep up the good work bro

Good to see Roberto drive by

Drove right by where you did this winch out on a trip to drop off some stuff in texas. I stopped at that loves and considered tacos for lunch.

Good to see the blue Pete in the yard - I thought you said on an earlier video that it had been decommissioned.

He really didn’t have the diffs locked!? 🤦‍♂️ that would have been the first thing I’d have checked. Goodness.

Good video Trent easy money! Suggestion run the zip tie thru the loop and secure it to the pin, shouldn't slip out and your keeping it tight against the pin. 😎👍 〽️

My first thought when I see the drag winch pulled easy, damn Ron almost never has that luck from the videos I seen of him using it.

Ur Truck Looks amazing Trent

@plazatowing

4 жыл бұрын

Why thank you. Thank you for watching!

I like the intro!

Trent I think there should be signs around sand spots like that and say The sand you see isn't as solid as it appears if you venture in you'll be sunk if sunk call Plaza Towing to get a lifeline to safer ground

Forget your wire cutters. Trent. I think. But like always. Cool Video. Great job

@plazatowing

4 жыл бұрын

I put them into my pocket! Must’ve happened while I wasn’t looking at them directly. Thank you for watching!

You could probably get / make a good strap holder from mountain bike or motorbike inner tube. Cut into 1 inch rings, slip over hook before the strap, stretch between hook shaft and tip after strap is in place. Cheap, simple, durable, etc.

It's good I like them 😊

Good job again is there a set price for all tow outs or does it depend on the job

That lot is a money maker for ya'll.

My 19 Cascadia has the tow hooks facing up. I assumed they will lock in up or down.

To hold your straps on your hooks take some mud flap material and cut them out the shape of a donut or first you might try slitting an X in the center of a tupperware lid. Just a couple ideas, good luck. Love your videos. PS how many thousand do I need to buy a rotator like you have?

Alright you know what I think? I think you should buy another awesome wrecker for the fleet. 😉👍

Do I see an intro? Awesome!

Nice easy 1 Trent :)

@plazatowing

4 жыл бұрын

Thank you for watching!

Yellow Pete along the fence is one you pulled outa there

Let's be clear - I know next to zilch about driving big rigs but it's pretty clear to me this client had a serious lack of knowledge about the truck he was driving - probably contributing to his getting stuck like that in the first place. More business for Plaza I guess.

Have you considered AMsteel instead of steel cable? Would make pulling out a line much lighter.

Not only have I been close to stuck in that very dirt lot, but I also hauled a load for that company “Value Truck” back when I was an O/O. If I recall, they are out of Buckeye, AZ. Great video, Trent.

When you said you were going to del taco I thought you were talking about a real city or town. Lol

Another job well done. Was there anything wrong with the trailer after he started moving again?

What's your method for doing tire-shine? Every time I've had a vehicle washed by a carwash and they've done the tire-shine it ends up splattered over the side of the vehicle. I don't exactly like washing cars but reducing sidewall dry rot would be nice if I could keep the tire shine from being flung everywhere.

Sir Trent !!! OKS !!! More money out of the ""Love's "" Money pit for sure !!! Looks like the Driver could have gotten himself out if he knew what he was doing with his truck as they don't teach ""OFF ROADING"" at the CO. or Driving School & showed he didn't know much about driving Period !! Always ,,Great recovery & ""KEEP IT SAFE ""!!

@plazatowing

4 жыл бұрын

True! Thank you for watching!

Real gorgeous truck 👍🏻 at the towing company I work at, we got a new 50 ton peterbilt rotator too. 550hp Cummins X15 good engine. Awesome truck. I drive the older 06 Pete 379 rotator there. It’s got a 50 ton 2015 Miller rotator on it. Awesome truck as well. That truck got a 600hp acert twin turbo caterpillar motor in it. Thing rolls coal. I love that truck. Cummins and caterpillar engines 👍🏻👍🏻. We got a 2000 t800 with a N14 Cummins in it. Awesome truck. Those motors run good. The cats take a little to start in the cold, but they got power and torque. Strong engines. I like the older motors better, but I’m really impressed by the new Cummins x15 motors in the newer trucks. It’s a good engine. Newer trucks also come with the PACCAR. I don’t like the paccar. The new X15 Cummins engines are good.

Did you walk back there and get you blue-handled diagonal cutter? I was almost buried in the sand.

@plazatowing

4 жыл бұрын

Yes they were put into my pocket. Thank you for watching!

Is this a private parking lot? Looks like someone would make it more stable since you've pulled out 2 now from there.

What kind of tire shine do you use.

When are you going to post the other videos

Cut up some bicycle inner tubes and just leave them on the ends of the slings.

Happy birthday and did you get your taco lunch?

Sorry.... truck drivers should know where the differential lock and 5th wheel lock is or they should not be driving.

I had a dream last night that I bought a semi truck. I work in IT....

@Embermist69

4 жыл бұрын

Career change maybe? 😁

Why do u use the hooks upside down.. wouldn't it be easier to hold the straps if the hook opening were facing up..

Why didn't he use his rotate r and lift the whole unit up in the air and lift truck to safety?

Small magnets would work great in that tow strap also. I think I said that once before. 😆

Do you give Love's a kickback so they don't pave that over? (just kidding)

Do a rotator collab with ron pratt lol

And ......no one is going to mention the driver didn't know what interlock was position was in? He could if drove out with the interlock ........

what motor is in the rotator ?

How big are your rotators?

I know you just got the rotator, have thought about getting a rotator with a side winch.

@plazatowing

4 жыл бұрын

Unfortunately that option is to heavy for California. It would be nice but I have not really found an instance where it would be more beneficial that n the drag winch or the main boom, but im sure I will. Thank you for watching!

What rear end gears do you have in Tator? 3:73 3:90 4:11? I. Engine x15?

I'm not sure I put the pull pins in the right place, you'd better check

How much a job like this would cost does anyone know?

Tow pin is faced (opening) down for a reason ...

Hi

What kinda money does a simple pull out with the rotator run? $500?

@BerlinBLR

4 жыл бұрын

At least Im thinking 700ish + tax

@AlekseiSoyunov

4 жыл бұрын

Если такие деньги платить, проще отцепить прицеп, переехать на асфальт и снова зацепить.

What did you mean the truck was in regen mode and was it the rotator or the other truck

@plazatowing

4 жыл бұрын

The rotator was in regen mode. With the new emission system the trucks have to occasionally burn off the filter therefore the truck goes into a slight high idle. Thank you for watching!

@davidcline6309

4 жыл бұрын

@@plazatowing ah ok ty for explaining

Have you ever did a daisy chain recovery before!?

@plazatowing

4 жыл бұрын

No we have not. We typically use bulldozers as. Deadmen for winching.

Why don't you on winchouts with the red or blue straps why don't you food the straps in half to shorting the strap but gan on the pulling power

@plazatowing

4 жыл бұрын

If I understand you correctly, you are saying fold the strap into 2 in the basket configuration and pull off of one hook? Although you gain the working load limit on the strap, the single pin would be your weak link. Hopefully I understood you correctly. If not feel free to reply! Also check this video out detailing why I pull out trucks like I do: Why I Pull Out Trucks Like I Do kzread.info/dash/bejne/m3aoscOjprDcZ9Y.html

sorry my english I am Brasilian spiak Portugues

I see a ring on ur finger

I want to buy your car and bring it to my country to use. Do not know you are willing

#993 thumbs Up

it is bad I hate the regen all EPA has done is coast buyers of trucks more money and repairs add some propane to diesel as it burns no leftover carbon in the air

12:26 That makes no sense to me at all...plus I don't understand why you don't get better lined up with the front of the truck????

You do know that washing a vehicle. Is the white man's rain dance. If you wash it something will happen to get it dirty. Just keep fighting the fight. Lol God bless

Just get some mechanics wire it’s cheap and you can reuse it over and over and over. For my diesel mechanic for doing it for 35 years do you learn to improvise

Did you get your cutters LOL

@plazatowing

4 жыл бұрын

Yes they were put in my pocket. Camera must’ve missed it. Thank you for watching!

CDL before ur 21??

@wickett7078

4 жыл бұрын

You can get it at 18 where I live but you cannot leave the state

WHAT is regen mode???????

21 years old and eating at Del Taco... I am twice your age and that would destroy my insides..

DelTaco, TacoBell eguals never and a day.

Why didn't you just grab it from back, he would gone about 10ft. And we wouldn't of wasted all that time. Probably could of used a lot smaller truck too. Just saying

@plazatowing

4 жыл бұрын

Certainly an option. The typical rule of thumb though is pull on what is stuck and in this case the tractor is what was stuck. Thank you for watching!

Good job ole Ron Pratt would be there for 3 hrs runinn mouth sirens flashin lights Bible

@pepaw4431

4 жыл бұрын

amen

U definitely made this a hell of lot more complicated than it should have been a simple tow would have sorted tgi in 6 min flat, but I suppose you need to justify your call Out charge

@plazatowing

4 жыл бұрын

Always someone...

@scampsboytes9088

4 жыл бұрын

Your opinion, but then you just had to have something to be critical about to make yourself seem important, or is it impotent?

@pepaw4431

4 жыл бұрын

@@plazatowing always an ass in th crowd somewhere that has to open theyre mouth & show how truly IGNERT they are Jr....treat it like water off a duck's back..."let it roll off"- be safe & keep 'em coming-

@pepaw4431

4 жыл бұрын

@@plazatowing always an ass out there somewhere that has to open his(or her) mouth & show just how IGNERT they are Jr--- treat it like a duck's back..."let it roll right off!" Keep 'em coming, & ya'll be safe out there!