The torn boot is why it locked the first time. Painted over sight glass so you couldn’t see the mixed oil. 😂

See Joe, this is another reason why I watch your channel. Even on a Sunday I can count on a new video from you. Husqvarnas have gotten a little more complicated to work on. You're a capable guy and I know you'll do what it takes to get it back in service. Thanks again for your time today.

@2vintage

Жыл бұрын

Thank you so much for watching! I appreciate it!

Looks like he put the bike in a pond

Love watching you diagnose and repair. Very skilled and methodical guy. Could watch this all day! Keep it up!

@koertvanengelen2395

Жыл бұрын

Skilled?

@HolySych

6 ай бұрын

@@koertvanengelen2395i would say so. i couldn’t take apart my 450 like this guy takes them apart. 😊

I love Husqvarna bikes ! I have 5 of them and race all of them ! This particular bike is a cagiva with husky decals as cagiva owned the marquee at the time !! Great video Joe I love this one , means a lot to me !! Absolutely wonderful to see this 👏 thank you again for entertaining us with your videos 📹

@jeredalmeida1880

Жыл бұрын

No way... CAGIVA?!! What a weird little niche company they are. Had no idea they owned Husqy though. Woulda been nice to see them resurrect Cannondale's quad division too.

@2vintage

Жыл бұрын

Thanks for watching! I am glad that you enjoyed the video!

@robertklasson5885

Жыл бұрын

@@jeredalmeida1880 today Husqvarna are owned by KTM, since 2013.

Man… That was a huge split in the intake manifold. Ain't no way he was going to "jet" around that!!! at least not properly. People really need to do things the way you do… Slow and methodical and really look at some of the more obvious things that get looked over. Nice job. Just from watching your videos, I would imagine there are thousands of people out there that will always check their intake manifold when tuning up and working on their bikes. 👍

@speedfreak8200

Жыл бұрын

Yes big time lean condition extended speed run and burn a hole in the piston

@2vintage

Жыл бұрын

Thanks for watching, and thank you for commenting! I appreciate it so much!

@westonater

Жыл бұрын

I tried that and I would never recommend that lol just fix your shit

Oh good we get a see part 2. At least it runs . We get to see the clutch then and maybe more. I enjoy this kind of in depth repair.

@2vintage

Жыл бұрын

Thank you for watching!

I remember being able to unload a bike like you do joe , now I need a step ramp lol and use it all the time , reminds me of my age ase I turned 54 today 😅 I have been racing since 1977 and still going strong, just like your videos dude !! Thank you again

@johnnyjohnson2942

Жыл бұрын

I'm 59 and disabled so I have to stick to my trailer from now on, going to have to build a deck on the back of my camper at some point. lol

@greathornedowl3644

Жыл бұрын

Happy Birthday! I watch old Joe bending, twisting, pulling and I need to take a Tylenol. Reminded of Ergonomics taught to dental students, fitting the job to the worker.

@mircearadu3854

Жыл бұрын

Happy birthday Mike !

@2vintage

Жыл бұрын

That is awesome! Thanks for watching and commenting! I appreciate it!

I wish I could get these finds here!!

The *intake manifold* is one of the first parts no longer available OEM on about every bike made. Unless one can find NOS stock part still around. They get dropped very quickly.

You are an outstanding very intelligent mechanic with excellent knowledge and diagnostic ability to make clear determination of what need be corrected to take care of all aspects of mechanical projects. Congratulations for all your abilities and I salute you every time. Many wish they could do what you do so very well. !!

Another bike saved and brought back to life 😎👊❤️🇬🇧

Finally got a husky yes brother I have the wr 300 09 model it's amazing that pipe is in great condition get a pipe guard for it to protect it that is a very low hr machine there's no boot wear on the side of the cases

Honestly a lot of the issues are fairly cheap fixes when a person has your motivation which is crazy...so honestly this was a good deal.

always a great story on your motor bikes that you buy👍it's amazing how bloody cold it is in that part of the world you wouldn't need a fridge to keep your beer cold good luck mate 💤💤💤

@2vintage

Жыл бұрын

We are hoping for some warmer weather this week! Thanks for watching! I appreciate it!

@louisarmstrong8863

Жыл бұрын

@@2vintage It's OK mate I don't need any prizes thanks for the offer restoration of anything is fantastic and it's all about learning and gaining knowledge and understanding how things operate learning is never -ending

I hope it is just a water pump seal... The alternatives are pretty depressing 😢 Good luck sourcing Husqvarna parts...😮

Yay a 2 smoker 🎉😊

Hey man, just wanted to say I watch your channel everyday. I probably watched all your videos and your a great mechanic. I’ve seen your skills improve from your earlier videos to the more recent ones and I have learned a lot from you so thanks and keep em’ coming bro!

I love watching your videos. I'm always learning something new. Nice to let play in the background while I'm working. Really appreciate no cussing. You might want to wear safety glasses when wiring with gas lines. I have been procrastinating on cleaning out the carb on my yamaha tw200. This is encouraging me to get it out of the shed and get started.

FYI when you come across contaminated coolant and oil use just water for test runs and used filtered used oil instead of wasting good coolant and oil. Pressure test radiator to test for water pump o-ring failures and radiator leaks.

Thats why 2 strokes rule. Way easier to work on. Plus I'm old school, thats all we had that was fast. Unless you wanted a xr or xl Honda slug. Bring em back i say.

Yep. I really dig your videos. I had Wrx 430 was an absolute beast! Made in Sweden. The rims were made in Norway. I loved that bike but a lot of parts were hard to source and the manifold was a true unicorn that I did finally find. The power band came in at high RPMs and lord have mercy...

you need to make a sandblasting cabinet and you need a parts washer and to get more ventilation to protect vinnie - the husky was a great pickup - train vinnie with tiny treats and he will get much more obedient - more than likely

@2vintage

Жыл бұрын

Haha we have tried just about everything with Vinnie! He is extremely strong willed, but still a good buddy! Thanks for the suggestion!

The manifold being split would be one of the causes for the rings being bad. Imagine how much dirt got sucked in.

@takedeadaim8671

Жыл бұрын

I’d bet the top needs to be re done, coolant system flushed, it’s caked with whatever was in the coolant, jetting sounds like a weird combination, the plug wire is unreliable. All the hoses hard, auto parts store stuff with screw clamps too large. She’s a rehab special, looks like a nice project though provided parts are still around.

@2vintage

Жыл бұрын

Thanks for the suggestion! I appreciate it!

Looking forward to the next video on this. Also can’t wait for the big bore racing bike video. Wondering if you figured out why it won’t start. Great work man. 💪🏼

To save gaskets on things like reed cages i find that breaking them loose by tapping the cage sideways usually prevents the gasket from tearing. Also gasoline cleans foam filters very quickly and dries fast.

@tonym5680

Жыл бұрын

Gas also breaks down air filter foam and glue over time.

@sandys9791

Жыл бұрын

@@tonym5680 yeah but not from a quick clean. It takes a while.

Literally, THE hardest working guy on YT!👍👍👍

@2vintage

Жыл бұрын

That truly means so much to me! Thank you for watching! I appreciate it!

@michaelgarland579

6 ай бұрын

Yea Joe is a beast very smart guy I'm learning so much

Top tip of the day for grips use hairspray works as a lubricant when wet and drys fast when dry works as a glue. Spray plenty on the bar works like a treat every time. Mega vids by the way love the content

Adding oil to cylinder makes it basically hydro lock that’s why it boosted the compression so much run it ride it check it again could have just been low cause it’s been sitting

Love how Vinnie runs off down there as soon as you pull away. He loves his dirt biking.

Epic video. U had her up and running in no time man awesome. Nothing like a little 2 stroke action keep the videos coming. 😮

@2vintage

Жыл бұрын

Thank you for watching and commenting! I appreciate it!

I've been looking forward to seeing you do one of these cause I'm about to have to do it to mine

@2vintage

Жыл бұрын

Thanks for watching! I hope that the video helps!

shoe goo!!!!!! works like a charm for fixing those boots!!!

Oh man...good luck getting parts for that thing...but love uour ability to find such deals..around me everyone thinks they have something worth way more than they are. ..that's why I got out of flipping bikes..but in your case I am sure the KZread revenue helps buy the projects.😁👍

@greathornedowl3644

Жыл бұрын

I was thinking the same thing, rare bikes - like rare cars - okay where are you going to get parts

@Rene-up1dl

Жыл бұрын

Covid ruined the market

Another score for you…I always wanted a husky,I saw a lot of them in baskets…that kept me off them..nice to c you wher ing a helmet..you have a lot of followers now,that sets a fine example…

ive seen that color- in outboard motor gearcases😀😀

First husky in long time

@2vintage

Жыл бұрын

Yeah it's been a while!

I used to work on boats as well as 2smokes, and on manifold cracks I used an underwater sealant like 3M 5200 or Sikaflex after seeing it still act like rubber 20y under sea water and impossible to chisel out. Even around exhaust header temps this thing lasted long.

Amazing dirt bike, I can't believe it started that easy!!!.... super cool man. Love what you do man.

@2vintage

Жыл бұрын

Thanks man! I appreciate that so much!

If you turn the oil bottle around it flows better.

Hello ther iam Robin from Sweden i love your videos. An iam a motocross driver. And this Husqvarna it`s a Swedish bike Swedish brand :D

When you are pouring oil from the bottle, keep the 45 degree shoulder on the bottle down. Your oil will flow better.

😊 thanks for the 2 stroke video means a lot

I would have used automotive silicon sealer on that boot. Epoxy hardens and cracks again. Open up the crack, squirt in silicon, wipe off excess, and warm up with a hair-dryer to fast-cure the silicon.

Personally, I don't like paying over $1000 for anything that doesn't run

@holyhero259

Жыл бұрын

@@martinbarrscrf4502 if I can guarantee that's all it needs. Sure.

Nice video! Do yourself a favor and get a cylinder leakdown tester, it is a more accurate way of measuring wear on the rings and cylinder than just a compression test. They aren't that expensive either.

No internet for over a week was getting withdrawal syndrome Glad to be back watching again joe few issues with the bike mate but not too bad after all you will fix it for sure vinny is some dog lol take care 👍🔧🔧🔧👌❤️

Hey Joe...I use a USB endoscope attached to my phone or tablet for looking into those hard to reach spots. They're about $30 or so, have a light and are super handy to have around. I use it for all kinds of things where it's difficult to see into or get at. That could help you peek into those hard to get areas.

@2vintage

Жыл бұрын

Thank you for the suggestion! I appreciate it!

Up early on a Sunday morning!

I had the wr125 and the inlet manifold was split on that .they are really hard to find used ones where going for over $100 +post it was a 2011 really tidy bike but never ran properly. Good content as usual 👍👍👌

@2vintage

Жыл бұрын

Thanks for watching and commenting!

Love your videos joe ive fixed so many quads and bikes because of them ive been watching for about 5 years ive seen every video you've put out i miss the ones at your parents with chuck keep up the good work anyway all the best from Newcastle upon tyne mate

@2vintage

Жыл бұрын

Thank you for watching the videos! That means so much to me, and I appreciate it greatly!

@paulwillis3743

Жыл бұрын

@@2vintage your very welcome mate I'll watch for aslong as you keep putting them out people can learn alot from you

@michaelgarland579

6 ай бұрын

I'm new to the channel an I learned alot I just bought a 2003 125 yz an it doesn't have 2 gear so it's at shop I paid 1900 hundred Facebook

damn you always get these good deals. I'm on marketplace constantly looking for stuff but down around my area stuff doesn't pop up as much.

@2vintage

Жыл бұрын

It can be tricky to find machines to pick up! I am always looking out for something to come up!

@kevinburnsdikk7454

Жыл бұрын

You do realize he lies about most his prices,.to entice the viewer to click!

@ShotgunSsergio

Жыл бұрын

@@kevinburnsdikk7454 without proof idk. I've scored plenty of great deals but you typically have to catch them within the first 30 mins. I literally just missed a go cart and atv for free that were in great shape but just sitting in a storage unit for 5 years.

You didn't tighten the compression tester . Probably Leaked compression from not clinching it up.

Joe brother you just amaze me how you know about all kinds of different motorcycles and quads. I know I could definitely troubleshoot a bike now set valves , jet a carb !!!! Thank you!!!

@2vintage

Жыл бұрын

Thank you for watching and commenting! I appreciate it!

Ask Vinny about the coolant lol

@2vintage

Жыл бұрын

Hahaha

Thanks for the phone notification sounds! ... "wait.. is that my phone?" heheh

Great job, Joe! Thanks for this video.

@2vintage

Жыл бұрын

Thank you for watching! I appreciate it!

12 minutes in, exploding nasty coolant, milky oil, and gas in the eye, followed by dropping a bolt. I’ve watched you for over a year now and never seen a series of unfortunate events like that 🤣🤣. And you still don’t give up. Time to finish the video lol. Definitely going to be another great one

@2vintage

Жыл бұрын

Thanks for watching! I appreciate it!

Bravo on the grease the filter seal That's a classic old-school beauty of a trick

lol can remember the breaker bar being kx85 handle bars correct me if wrong

I was hoping it wasn't that seal but definitely worth the fix those are pretty fast bikes

love this ch mate you have shown me so much i have seen all most all your vids love them keep it up plz

What a channel. Very good work man!!

Huskies and montessa, did massive trials bike's.....they were back in the day, the 🐕.....not soo much on the motocross side. Good lad my friend. And once again massive thanks and respect 🙏 🫡

Your knowledge of motorcycle works is astounding

@2vintage

Жыл бұрын

That means a lot! Thank you!

I had a WR360 from that era. My clutch felt weird when I got it, turned out the basket was a bit notched out. Light filing took care of it. My 360 was a 6 speed, I'm fairly certain.

I love your content, this video was extra sweet since I just bought a Husqy recently. Love the bike and I hope you work on some Husqy 4 strokes in the future!

@2vintage

Жыл бұрын

Thank you for watching! I am glad that you enjoyed the video!

Hey bro! Im starting my first project bike soon (dr200). I love your videos, very informative! Im just wondering, how do you have all those replacement o rings in your garage? Do most motorcycles use the same size o rings or do you go buy them each time? May be a stupid question but im trying to learn! Ride on

you have given me so much motivation to start fixing bikes again mate😊 , but i have always wondered when people sell their bikes to you & watch your Videos after and be like f*ck me it was just that needed fixing and regret the sale after 😈

I’ve learned some things about my own motorcycle from your videos. Thanks! But one question…… where do you live because the weather always looks terrible. 😂

Hi there really enjoy learning from watching your videos.. Question Do you ever sell any of these bikes after your done working - played on them .

The funniest video ever, waiting for more

@2vintage

Жыл бұрын

Thanks for watching! More to come!

Great vid as always! Hopefully it’s just that water pump seal leaking! Glad to see it runs so well with such a pond in the bottom end tho! Thing rippsss, Great Job!!

@2vintage

Жыл бұрын

Thank you for watching! I am glad that you enjoyed the video!

I bet ur neighbors just love you lmao. Great Video as always and great diagnosing the problem and getting ole girl running again

Farmer brought in a 1962 ski doo twin track. Ugly thing but it does still run, wants us to rebuild top end and maybe whole motor. He uses it as a utility sled to haul hay out to his cows. Gonna be fun.

Ohhh man I was buzzing when it started rite up . Carnt you open the water pump housing? Wind off the impeller ? I'm sure the few I've done was just a rubber seal behind that slots into a recess

For installing tight grips, spray the handle down with windex or other window cleaner. It lubricates then evaporates.

@2vintage

Жыл бұрын

Thank you for the suggestion!

@RT22-pb2pp

11 ай бұрын

cheap, aqua net hairspray, starts wet then sticks like glue, never had grip slip, it is cheap at any drug store or wal mart. had 6 sisters grew up in 80s always had a huge free supply LOL the hair decade.

I love your videos man keep up the good work!

@2vintage

Жыл бұрын

Thank you for watching! I appreciate it!

If it's a big bore its a 293 cc so it's basically a wr 300 if the bore is 72 mm the manifolds are 100

Curious on machine count, seems like u gotta new machine each upload😅😅, love it keep it up. ive learned quite abit watching you. Thanks for that aswell. My quad count is up to 7 . I knew next to nothing few years ago, bless your soul. Nd vinny reminds me sm of my old pup😢

@2vintage

Жыл бұрын

I think that I have worked on over 1,000 machines since I started the KZread channel! Thank you for watching! I am glad that you enjoy the videos!

So impressed with your ability you have with bikes!🌟💫🇺🇸👍🏻😎Hoosier Wing

@2vintage

Жыл бұрын

Thank you so much! I appreciate it!

2 stroke content yay !! ♥

The oil was all creamy and we're putting grips on, must already have it listed on market place.

That turned into a great deal! Only thing I would have done different is filled it with water, ran it like you did then drain and put antifreeze back

Sweet as hell! Gotta love them Huskys.

Vinnie Bear is so cute. I just love that dog. He just makes me smile when he's on camera even though I'm here for the machines 😂🙏😁

@2vintage

Жыл бұрын

He is a good dog with a great personality! We love him a lot!

Great rebuild

The cut intake boot probably caused the motor to seize

@sevendyseven4090

Жыл бұрын

Lol..did u not watch the vid?..it's clear as day it NEVER seized..no engine would ever start on 3rd kick like that.

Love your videos, do you find these bikes on FB marketplace?

@2vintage

Жыл бұрын

Thanks for watching! I find the machines all over the place!

Top job there I'm wandering weather that engines got more to give sounds a bit restricted

Id like to see u get a bore camera an check out the pistons an cylinder on these projects.

I would Definitely change the bearing when you change the water pump seals. You definitely lucked out with this bike for it to run aswell as it does after a little cleaning.😊nice bro

@2vintage

Жыл бұрын

Thanks for watching! I appreciate it!

@SelvesterAKAP00tyTaT

8 ай бұрын

@@2vintage did you ever change the water pump seal on this bike? if so can you direct me to the video please???

What helps with these videos if you are a "new learner" and really want to learn what he is doing, is to download the specific repair manual from the Internet for the specific bike and outline what he is measuring, testing and working on and then everything will make sense. Thank you 2vintage as loyal fans we love you !

Sounded like Bob Ross talking about that manifold😅 Great video.

@2vintage

Жыл бұрын

Thanks for watching! I appreciate it!

I had a 2000 Husqvarna TE 610. Bought it for 2k rode it on street for 3 years. But the quest for parts was an absolute nightmare. Had to order from Uk,Greece,Austria absolute nightmare.

you need to flush the oil buddy. it will take a min of 3 flushes coolant system to it may have oil in it

The wr model is same as cr but wide ratio transmission and spark arrestor , cr is the mx bike and the wrx is the Enduro bike which had lights but only a couple x models were brought to the usa , limited production run on the x models , all of them are great bikes but a hard resell , they don't bring value to seller 😮 but again great bikes and the Italians have a great eye for detail

@bikebreak4523

Жыл бұрын

It's a Swedish made bike but they are great I've owned a few of these, a wr125 2010 and also a wre250 2002, huaqvarnas and now just basically a ktm though as their owned by ktm, on my latest te300 you would remove parts and it would have a ktm stamp on it somewhere 😂

@mikehudge78x

Жыл бұрын

@@bikebreak4523 cagiva bought husqvarna from the Swedish firm in late 87 and produced both brands until 1990 and dropped the cagiva brand off road models but kept making husqvarna aka cagiva throughout the Lamson and chiodi Era until around 2005 when sold to BMW then the red head engine evolved and after 2013 ktm bought the franchise I have owned and raced all of the eras of huskys and even had support when the Germans owned them .I raced a factory cagiva/husky 250 4 stroke in 2002 factory sachs shock with Marzocchi shiver air forks fir a small husky dealer out of Minneapolis for them - great times and I still race cagiva/ husky bikes in vintage today

@bikebreak4523

Жыл бұрын

@@mikehudge78x yeah I forgot cagiva had them! Cagivas are awesome bikes too! Wernt they involved with ducati aswell at some point? No doubt you've had some great experiences riding those machines! Alot of people were and still are put off by them for some reason but I've had nothing but great times with huskys!

I've always wanted to own one of those bikes. They are wicked fast and go anywhere

I clean the washable air filters with simple green. Works well.

I've always used gas to clean my filters. Works great! Just make sure to gently squeeze out the excess gas and then I wash it with dish soap and hot water. People have told me that gas will dissolve the glue that holds the filter together. Has yet to happen to any filter I have ever used. Plus those filter cleaning solutions are expensive.

@2vintage

Жыл бұрын

Thank you for the suggestion! I appreciate it!