Just subscribed! I think you can have a niche audience by doing these short single point videos. They are quickly digestible and informative. Thanks

@heretorecord

3 жыл бұрын

That's what I was hoping for! Cheers

Please do a more detailed Select Bus video! We need you! I'm new to all this and it still kills my brain. You are teaching me a lot. Thank you.

@heretorecord

3 жыл бұрын

I like to hear that. More coming!

Great Video, so far this is the 1st tutorial on the extreem , all the others are just " Feature's the xtreem has"... Cant wait for more..keep up the great work!!

@heretorecord

3 жыл бұрын

Glad to hear it, thanks!

I'm only a week into my mini extreme ISO. This was a fantastic tip.

Excellent overview John. I'm looking forward to seeing more tutorials delivered on The Extreme in your easy to understand manner.

@heretorecord

3 жыл бұрын

Glad it was helpful!

Thank you. Good easy explanation!

Nice overview of the select bus John. Thank you.

@heretorecord

3 жыл бұрын

Cheers!

Very good explanation 👏🏼👏🏼

I'm new to the ATEM Mini Extreme, having just upgraded from the ATEM Mini Pro. I would really appreciate a basic tutorial (if not previously done) on setting up cameras, etc. Always learn from your videos. Hank

Woooww i love your video i was so green about the select bus but i know seems easy

@heretorecord

3 жыл бұрын

It is! and it works nicely

Great demo - good duration and focussing on a couple of features. Really want to understand the device more before purchasing.

@heretorecord

3 жыл бұрын

Happy to hear it - I'm trying to make the videos that I would love to have watched before buying my first ATEM :D

Excellent overview John. We've pre-ordered the ISO version, so now waiting with baited breath to fit it into a new 're-built' 8RU mobile switch rack....

@heretorecord

3 жыл бұрын

Please share pictures when you are done!

Thx John

This was great! Thank you.

@heretorecord

3 жыл бұрын

Glad you enjoyed it!

I can use BUS in macros created with different font sizes. Macros would be linked to Super Source. Thanks

great explanation - even I understand it! I assume that there is only DVE 1 & 2 buttons on the select bus because of lack of space?

Thank you for sharing, my space has 2000 meters wireless intercom and the introduction of tally, welcome.

Bravo and thank you!

@heretorecord

3 жыл бұрын

Thanks for watching

Sweet!!!

Nice & Thanks :)

excellent

@heretorecord

3 жыл бұрын

Thanks!

Keep these coming! Very familiar with the regular mini pro, but need to be be brought up to speed on the Extreme. Is it possible to have a chroma keyed source show up in one of the DVE squares. I have a speaker that uses a green screen and I want to key their background. But I also want them to show up in the dve on top of the main program while it’s still keyed. Hope that makes sense. So far it seems like you can’t do both at the same time

Great videos as always. Can you show how to change the supersource layouts live other than the preset?

@heretorecord

3 жыл бұрын

Working on a video about SuperSource video already - hope it answers your questions!

Really well thought out tutorial - thanks! Here's one for you. Can you use the select bus to mix (not cut) a lower third to air supplied by a keynote input on one of the channels, using only the buttons - not the software control? Could be Luma or Chroma.

@heretorecord

3 жыл бұрын

You can only do it via a cut, unless you do the fading in keynote

@gerryburke7865

3 жыл бұрын

@@heretorecord Thanks - as I suspected. Tried the keynote fade in chroma but you see green during it.

@heretorecord

3 жыл бұрын

That’s true. Fading is very hard with keying. You could do luma instead but it will still just look okay.

I think the topic of MAKROS is not explored enough and for what we need black or bars button?

Another little nice video! Switch one of the side-by-side souces is really a new feature inspiration for YoloBox! How easy it is to add/change the background picture? (I'm glad we have implemented side-by-side and split-view in our last update!) Maybe a comparison video between YoloBox and the Extreme, rather Pro and ISO, hahaha

Pls how can I also view the multiview window through the remote atem?

How do you do a 3 camera switch insert into 1 window and PowerPoint into another. Both feeds will be coming into the Atem Mini Extreme via HDMI. I would also like to move from a two window config to just full screen switched video and back.

How I can play lower third or video clips straight from the select bus?

This is really helpful thanks. How do you bring pre recorded videos into the production?

@heretorecord

3 жыл бұрын

I would use a HyperDeck or some other playback device to achieve this right now!

There is a problem with Select Bus Buttons of ATEM Mini Extreme ISO. I use ATEM Software Control for setting Palettes like Luma. Chroma, Pattern & DVE and use ATEM Mini Extreme ISO Select Bus to apply these effect during live production. But I face problem when the ATEM Mini Extreme ISO buttons dose not change to Red during ON AIR, If require I will send XML for reference, please advice

@heretorecord

2 жыл бұрын

Please send some screenshots/photos to john at heretorecord.com and I can take a look.

"Stinger"...? The one feature that occasionaly has me using OBS instead of the Atem Mini Pro? Tell me more, please...!

@heretorecord

3 жыл бұрын

When I know more I will tell you!

3 жыл бұрын

@@heretorecord If you find anything out, you might be first. According to the manual "Stinger and Graphic Wipe are special transitions which will be covered in a later section." (p. 153) but there is no later section that makes mention of either. The closest I find is the Graphic Wipe of the higher end Atems (p. 159).

@FilmmakersAtLarge

3 жыл бұрын

John what up. Unless it’s me, there seems to be a difference in the units released. When I was looking at this video and following along on my extreme iso, I noticed that some of your selection bust buttons actually turn red. All of mine turn white. Is there a setting somewhere that I am not seeing?

it seems that you used greenscreens for the videos at 3:50. How did you do it?

@heretorecord

8 ай бұрын

These were pre-recorded videos that I use for all sorts of demo content

Thank you for demoing the select bus and some of the use cases for it! Is the Logo Bus only for graphics or can you map a video source to go to the logo?

@aarontrobinsonshorts

3 жыл бұрын

I’m wondering the same. Can’t find much info in the manual or elsewhere yet.

@heretorecord

3 жыл бұрын

I checked this out. There is an option in the ATEM Software Control for transitioning with a graphic. This logo button lets you set that graphic source (which is likely to be one of the Media Players)

Hey mate, any chance you know how to record the super source in Iso. It doesn’t seem to work.

@heretorecord

Жыл бұрын

Hey - SuperSource doesn't record as part of the ISO recordings. The only "trick" to make it work is to loop one of the HDMI outputs back into the ATEM and set that output to SuperSource - that way you are able to record the ISO.

Hi John. Thanks for the video. I've tried to re-create your example at 2m20. Am I missing something? My select Bus is all White whereas yours is Red in the close-up at 2m58. K1PTN?? Is that something I have to set in the software? You refer to KEY1. Is that DSK Key 1?

@heretorecord

3 жыл бұрын

Good question. The reason mine was red in that example is because I had the Key1 On air and the red buttons are telling me to be careful about what I am doing. The audience will see these changes live. In your case you were doing it off air and the buttons are white in that case. K1PAT refers to "Upstream Key 1 Pattern". You will find that in the ATEM Software Control in the "Upstream Keyer 1" section on the left side.

I'm about to buy the ATEM Mini Extreme ISO, just wondering about one thing: when viewing the presentation and the presenter side-by-side, is it possible to resize their windows? During live production I usually want to have the presentation displayed in a larger window, and the presenter in a smaller (usually square-cropped) window. I also want to have both those windows placed on a custom, event-related background. Until now I had to use an external video processor to achieve that. Is that possible on the ATEM Mini Extreme? Great video by the way, as per usual :)

@heretorecord

3 жыл бұрын

This is possible with SuperSource. You can do a side-by-side view (sort of like the PiP i showed) but you can move the speaker over, make their presentation big and also crop the speaker too! Then on the background you can add a still or moving source as a bg!

@SUPERDAVOR

3 жыл бұрын

@@heretorecord Brilliant! Looking forward to your SuperSource video then :) Keep up the good work!

Can the SuperSource be set as a tile in the multiview? And set to preview like one of the regular inputs?

@heretorecord

3 жыл бұрын

Yes it can!

Can someone explain why having color bars is important?

@heretorecord

3 жыл бұрын

It’s a test signal to send to a monitor in a room, or a live stream endpoint. It’s also useful for checking if a monitor looks calibrated based on other sources around you.

Does anyone know what the Logo Button on the Select Bus is used for?

@FotoSiani

3 жыл бұрын

I would like to know too. There is also the STING button

@heretorecord

3 жыл бұрын

Working on a video about this, but the "logo" button is the graphic source for one of the transition options which allows you to add a logo to the transition

Please makea video on how to use the the upstream and downstream keys

@heretorecord

3 жыл бұрын

Good idea. Can do!

@harshrathod310

3 жыл бұрын

@@heretorecord thanks And one question Did u noticed any frame drops in the recording in atem extreme?

@harshrathod310

3 жыл бұрын

@@heretorecord so instant reply🤯

@heretorecord

3 жыл бұрын

Not yet, and hopefully not in the future either

@MrLegendMusic

3 жыл бұрын

@@heretorecord is possible we do not need and make so many macros in the future with this?

Hi John, thanks for these videos. Not really content related but your exposure seems a little off...

@heretorecord

3 жыл бұрын

I was battling the sun that day, not much I could do but lessons learned along the way! The joys of having a house with massive windows