For me as a native Russian speaker it was fun when Scott tried to figure out the functionality of some buttons and gauges.

@nkolchenko

3 жыл бұрын

And he made it!! That was quite unexpected for me :-)

@derimik15

3 жыл бұрын

Right now, I need to guess these too, but I'm currently learning Russian so hopefully in a few weeks I can understand the name of the butttons

@prolska

2 жыл бұрын

@@nkolchenko f

@Amberlynn_Reid

Жыл бұрын

Space is so gay!!,, !

@Lemev

Жыл бұрын

The good ol' soviet technology.... More electromechanical, than digital stuff... I bet it still could run nowadays!

Nice Russian skills, Scott! This model of Soyuz was used to test orbital rendezvous and docking. Hence the control system contains equipment for that: 8:23 - Video screen for inboard and outboard docking cameras. It could also display analog sensor info like fuel levels, yaw/pitch etc.. 9:33 - Rendezvous velocity and distance indicator and buttons for main functions from command panel. 9:36 - Radio volume and band control (on the top of the screen). 9:52 - Round - capsule power supply indicator. Square - life support info. 10:20 - Right control panel. There should be exactly same panel on the left. 10:22 - Flat screen is the computer status display - shows current running program. 10:30 - Knobs for manoeuvring control. Has a deltaV range of 0.044-150.0 m/s.

@Bill_Woo

5 жыл бұрын

Wow, thank you!!!

@grahammckemy1390

4 жыл бұрын

Where do most of the Soyuz capsules go after they fly? I feel like they would be in more museums since there are so many of them. Do they go to a storage facility? Do most of them go to a "aircraft graveyard"?

@twistedyogert

4 жыл бұрын

@@grahammckemy1390 Don't know what happens to the actual capsules, but the control panels and electronics are reused.

@twistedyogert

4 жыл бұрын

What model did they switch over from the analog gauges to the modern day glass cockpit?

@dr.bharatbapodara3223

4 жыл бұрын

Cool knowledge Ilya dorokhov.!!👍

10:02 Scott attempting to read Cyrillic and getting it mostly correct, makes me weirdly happy.

@olmostgudinaf8100

4 жыл бұрын

Not only read, but also understand. Not bad.

@ModEscharPlays

4 жыл бұрын

He did get the OKC part wrong... it's actually OKS ;)

@forksandpopsticles9183

3 жыл бұрын

Well at least he knows the numbers perfectly :)

@inemanja

3 жыл бұрын

@@ModEscharPlays Well considering N on the other side it may be OKC for real! (actually, it surely is OKC - I'm only unsure if it is Cyrillic or Latin alphabet :-D - here in Serbia we are using both, but we are never mixing them -- if that is the case it is OKC or (ОКЦ) definitely)

I like 1960s & 70s era Soviet space tech. It wasn't fancy, it just did the job extremely well.

@ericmuschlitz7619

4 жыл бұрын

It's amazing how Spartan the technology was, and realize miniaturization was in it's infancy, so there really wasn't a whole lot going on as far as data collection. There was an American character actor in the '60's who played a "Mexican cosmonaut" who's favorite part of space travel was the blast off, "cuz you got to get blasted to up in one of them things". Wonder if Soviet Cosmonauts might've been privy to the good stuff?

@AaaAaa-ly3on

4 жыл бұрын

It is very fancy - for the time! Beautiful tiny Globe - 7:58 , extremely complicated and gorgeous programmable dual timers and clock - 9:58 or just pretty blue - teal-ish parts of spacesuits! - 10:52

@pjimmbojimmbo1990

3 жыл бұрын

@@ericmuschlitz7619 That was Astronaut José Jiménez, a character played by Comedian Bill Dana

@beenaplumber8379

3 жыл бұрын

I look inside and I simply can't imagine anyone but the most hardcore, hardass, balls of steel types actually getting inside, waiting while they wrench the hatch closed, and saying, "Ok, now light this thing up!" (With respect to Valentina Tereshkova, who flew in a Vostok, I imagine she was cut of the same cloth, but I don't know how to say "woman with balls of steel" in English.) I'm claustrophobic just watching the video.

@beenaplumber8379

2 жыл бұрын

@@jackster8976 Soyuz 1 is an incredible story, so I wrote it down in the wall of words below in case you're interested. The success of the ongoing Soyuz program today really argues against any criticism based on safety or engineering. Col. Vladimir Komarov is a hero of mine. He died alone when his Soyuz 1 capsule hit the ground and burst into flames just north of the Kazakhstan border in Russia. (One day I intend to visit the Komarov monument there and share a good bottle of vodka with my hero.) That was IMO not a matter of poor or inadequate technology or engineering. It was a politically driven human sacrifice, and Komarov walked into it knowing exactly what was going to happen. Every Soviet Cosmonaut knew. The large number of system faults aboard Soyuz 1 were all known issues that were being addressed by the design engineers, but the Soviet premier Leonid Brezhnev ordered the launch to proceed in time for the 50th anniversary of the Soviet Union. He would either have a new hero to present in the 1967 May Day parade or a dead hero to inspire the Soviet people. He didn't care which. They only needed a little more time to fix the issues that killed Col. Komarov, but Brezhnev would not wait. They hadn't even tested all the systems by the time they launched. All the Soyuz Cosmonauts knew the machine wasn't ready for flight, and so did the engineers. Their protests are well documented. Due to Komarov's remarkable skill as a pilot and engineer, he nearly saved himself. Despite major failures in nearly every system, he was able to orient the tumbling capsule to the correct angle for a re-entry burn, and he successfully fired the retro-rockets. He re-entered, and his descent was normal most of the way. Unfortunately, his main parachute got tangled up and didn't deploy properly. His back-up parachute got stuck in the deployment tube, so it couldn't deploy either. I've read two explanations for that failure of the back-up parachute. 1. The inside of the tube had been given a layer of heat-resistant paint that the parachute engineers didn't plan for, so it didn't fit properly. The technicians who packed that parachute had to force the chute into the tube with a big mallet. 2. Because only one of the two solar panels had deployed on reaching orbit, and that one was not effective due to the constant tumbling of the spacecraft, preventing Komarov from orienting it toward the sun, he was essentially flying on battery power, which was depleted during descent. (That much is documented.) There wasn't enough power to trigger deployment of the back-up chute. A third explanation I've read is that the back-up chute simply became entangled with the tangled main chute. Col. Komarov agreed to fly his suicide mission because if he refused, they would send his backup in his place, his best friend, Yuri Gagarin, who was the first human in space and a MAJOR soviet hero. (Gagarin would have gone.) Gagarin pleaded personally with Brezhnev to give them time to finish working out the many engineering problems, but Brezhnev wasn't having it. Komarov's death ruined Gagarin. It ended his career, and there was talk that Brezhnev was ready to have him "disappear" because he was so public with his personal protests made directly to Brezhnev, often in front of important people, causing him huge embarrassment. Gagarin went into a deep and prolonged depression and drank heavily (yeah, even by Russian standards). Within 2 years he was dead too. He had sobered up and accepted an air force assignment as a fighter pilot, and he died in a training accident. (Conspiracy theorists think it was no accident, but an assassination ordered by Brezhnev. I don't buy it, but I won't argue about it.) The other fatal Soyuz flight happened in 1971 (Soyuz 11), when an air valve got stuck open when the landing module separated for re-entry. It was supposed to close automatically, but the exploding bolts that separated the modules fired incorrectly. However, the possibility of this failure was known, and the crew was advised to close the valve manually. For whatever reason, they didn't, and all the air in their capsule escaped into space. Not a story of heroism, just a known issue that wasn't addressed properly. (That's what brought down the Space Shuttle Columbia - a known problem that hadn't been addressed.) The Soyuz remains the safest and most successful manned spacecraft ever, as is the R7 booster that puts it in orbit. It continues in service today as the primary space vehicle in the Russian space program. Recently it even became the first spacecraft to execute an inflight launch abort, returning the two-man crew safely to the Earth. There has never been a safer manned spacecraft ever than the Soyuz atop an R7 booster (now called the Soyuz booster). In fact, there have been over 1680 total Soyuz flights, and over 140 were manned. ~40 Americans have flown at least once on the Russian Soyuz, not counting the three who flew in orbit only as guests aboard Soyuz 19 while it was docked to their Apollo spacecraft in 1975. The Soyuz spacecraft in use today contain newer electronics, bigger solar panels, and seats that accommodate taller passengers, but the actual Soyuz spacecraft itself has been changed very little. I think their 1960's technology was absolutely rock solid, and Komarov understood it better than anyone. I think he knew it would be a great machine if they'd been allowed enough time to finish their engineering work. However, their political system was an absolute catastrophe, and he knew that too. Col. Vladimir Komarov was killed by that political system. (If you're wondering, I'm an American, a former Apollo kid, so I'm not just spewing pro-Soviet or pro-Russian propaganda. Since the late 1960s, space was the one place where we could truly be friends with the Soviets and cooperate on research and development. I wish we'd extend that same friendship to China today.)

This felt like an episode of "Inside the chieftains hatch" but for space nerds. I absolutely loved it and would die to see episodes about other capsules as well 🙂

@marthaindahouse1010

3 жыл бұрын

Inside the Commander's Hatch

There's actually a whole graveyard of used Soyuz capsules near one of the hangars at Baikonur.

@scottmanley

5 жыл бұрын

I’m sure. I wonder if they’d sell me one.

@user-yf9vn3gc6l

5 жыл бұрын

And there are also 3 Buran shuttles rotting in hangars

@ethanpoole3443

5 жыл бұрын

Даниил Архангельский That is very sad and yet all too true. While they were heavily influenced by our space shuttle in many respects, the Buran was still an impressive Soviet achievement with many of its own unique aspects and even speaking as an American it is very painful to see so much of the Soviet space program relics simply left to rot when they should at the very least be preserved in museums for future generations to enjoy and learn about - mere photos simply do not carry the same emotional impact as an actual spacecraft standing before you.

@jeff-gl1yx

5 жыл бұрын

HO LAM YIU I somehow highly doubt they’d sell you that, and seeing as they’ve got valuable equipment with various metals etc, I don’t think they’d want to.

@jeff-gl1yx

5 жыл бұрын

HO LAM YIU They’ve got traces of toxic materials, valuable metals, valuable equipment. They shouldn’t sell them, if they get rid of them at all, it’ll be to a museum.

8:06 The globe instrument is awesome, never seen that before.

@dirkdiggler1242

5 жыл бұрын

Merrin proof of the ball earth " Theory"

@kurumi394

4 жыл бұрын

@@dirkdiggler1242 Can't tell if being sarcastic or just plain stupid

@Miguel-el1ch

4 жыл бұрын

In Black Ops Zombies map Ascension, it's on the control panel of the lunar landers

@twistedyogert

3 жыл бұрын

Every Soviet/Russian manned spacecraft had those until 2002. Modern ones use maps on computer screens to preform the same function.

If we get deep into invention of Phillips screws - they have two key advantages to them: -Self centering for automated power tools and -Auto limiting applied torque - preserving heads and treads. -But then also Phillips screws very difficult to precisely control exact tightening torque. That's why Torx was invented - it's combining advantages of Slotted and Phillips screws. Since early Spacecrafts assembled exclusively by hands - Slotted screws were not a problem and even necessary for precision tightening of fragile glass of illuminator!

@expfcwintergreenv2.02

3 жыл бұрын

I like to imagine the Canada Arm on the shuttle was held together with Robertson screws 🔩

I live ten minutes from this museum. It's one of my favorite places to spend time. We have a membership and bring our kids there once or twice a week. This was awesome to watch!

@Squishyobsidian

5 ай бұрын

shameless self dox going on here XD

Scott, If you'd like to spend more time with Soyuz, try to get to Moscow Space Museum, there are a lot of cool Soviet space stuff there! I think, you would like to see them! And by the way, I've managed to get inside one of Soyuz modules while being schoolar on my tour to "Energia" factory in Korolov, Moscow region (yeap, THAT one factory). I remember the descend module being extremely narrow, but still cozy somehow... And a cosmonaut seat felt like a place to be, despite a bit unusual pose. It might look not so stylish, but cockpit ergonomic was tuned to the best. It was an experience of a lifetime, man

@11moonshot

5 жыл бұрын

Hi Yaroslav! I am an astronautics buff from Radebeul, Germany. Question: Why has Roscosmos passed the chance to construct a radically more modern version of Soyuz? (I've seen some designs on their web page - but until now all projects have failed to materialize. When Space X takes over taxi service to the ISS in 2019 - I am afraid the Soyuz will not survive for long...)

@09041995101

5 жыл бұрын

@@11moonshot actually, Roskosmos actually IS working on a new spaceship now, and there were a lot of projects in the past indeed. They even speak about some solid dates of first tests as far as I know. Will they achieve them is another matter, but some work is in progress, as far as I know. I'm sure (and heart some rumors) that nobody in Roskosmos took Space X project for serious until its first successes. As for me, I'm deeply worried about it, because it would be dumb AF for people, who sent Gagarin to space, to be kicked out of the business because of rusty way of thoughts... Anyway, man, I'm just an ordinary internet nerd, rumors are all that I can operate, and if you wanna some official info, you are to dig through Roskosmos official press releases. And I would like to see what will they come up with.

@petermcgarrymusicandflying

4 жыл бұрын

I was there

@SuperGeronimo999

4 жыл бұрын

Roskosmos will always be around. Russians will refuse to fly with Space-X capsule (which got tested today btw)

@theprod66

3 жыл бұрын

@@11moonshot Because they don't need a new spaceship. They don't have where to use it. For ISS they can use old Soyuz. The Moon program is frozen. And even they still can't finish any new rocket, that can carry larges spaceship than the Soyuz. But they need to show the picture, that they do something(it's the political stuff)

Will be chatting live during premier for those who want to ask questions.

@endamurphy3230

5 жыл бұрын

Did you see my comment on the last video it's a idea for a video

@kworkshop

5 жыл бұрын

Scott Manley no words can describe how much I love watching your videos! You have been my main inspiration for KSP and starting my KZread channel! Thanks so much for being awesome!!!

@1_2_die2

5 жыл бұрын

Grab yourself Cmdr Chris Hadfield (CSA), he should be able to explain almost all the hardware and instruments of the capsule. Would be even more awesome with some co-host, like Fraser Cane, Tim Dodd or so.

@densealloy

5 жыл бұрын

4:15 I missed the live chat but would you mind explaining " sensors would detect they were close the ground "... radar? utilizing Doppler effect?.. my interest is piqued, Sir.

@sietuuba

5 жыл бұрын

@@densealloy It's based on gamma radiation, which is also why the instructions on the capsule advise you to not stand in front of the heatshield while helping the crew get out... I don't know how gamma ray backscatter detection works exactly, but it's got an isotope such as Cobalt-60 producing high energy gamma rays that, once it's close enough, illuminate the ground and what gets scattered back triggers the soft landing rockets and releases the parachute.

I'm obviously way behind on Scott's content but this was fantastic! I could watch this stuff for hours and not get bored, thank you very much Scott for sharing with us!

Last year, I had the opportunity to see the descend module of Soyuz TM-19 that carried two cosmonauts to MIR and three back home. It is displayed in the space museum in Speyer, Germany. I found it crazy to imagine three people inside that tiny space falling back to earth. Also the marks on the heat-shield from reentry and touchdown are really frightening. (Btw, the museum also also exhibits a Buran vehicle which was used for aerodynamic tests, the heat shield is fully installed, though)

@johnbrown9181

5 жыл бұрын

Apparently they also have a Concord _and_ a Tu-144 on display you can go inside, too.

@TimGuntDE

5 жыл бұрын

@@johnbrown9181 Those are in Sinsheim a few kilometers away. The two museums belong together, though.

@darrenkrivit6854

5 жыл бұрын

That sounds like a cool experience, must've been neat to see up close!

Fascinating! Many thanks to Scott, and to the Chabot Space & Science Center for allowing Scott to get so up close and personal with the interior.

As an engineer, this made me tear up a bit with pride and excitement, and I'm not even Russian. Then it made me think of flat earthers. Thanks for the video, great work as always.

@simonkimberly6956

5 жыл бұрын

eluadyl me too but I didn’t cry lol.

@totalnidebil66

4 жыл бұрын

A Heinlein quote comes to mind: "Narby had no particular respect for engineers, largely because he had no particular talent for engineering."

@bennyhill5938

4 жыл бұрын

the earth is flat! this is a disney fake!

@greghansen38

4 жыл бұрын

When I try to do music or a sport or something, really start to learn what's involved, I get more and more respect for the people who do it well.

@EdwardWeissbard

4 жыл бұрын

@@bennyhill5938 X-D

Thanks for the down to earth tour of the Soyuz capsule, Scott! Very informative!

I saw one of these in the museum in Moscow in the late 80s when it was still the USSR. It was the Soyuz-Gemini capsules fastened together hanging 3 or 4 meters in the air. Next to it, on the floor was a Soyuz capsule. Comparing the two pieces of equipment was interesting. Some of the restraining straps inside the Soyuz were leather and canvas. All of the hardware and fittings on the Soyuz looked like they were very crudely made and had a 'village blacksmith' look to them. My first impression was "Why are they showing these two spacecraft next to each other?", as it was plain to see the US Gemini capsule was in a different level of refinement. Still you have to give the Russians or Soviets for their accomplishments.

I love watching tech from yesteryears to see how they did things and how far we've come. Speaking of, you should do a video on the V2 rocket. The granddaddy of space rockets.

Absolutely loved this clip! Thank you!

Amazing piece of history and space exploration. Thank you for sharing with us Scott.

GREAT video, loved it, thank you, Scott! The Soyuz Globus is just SO ADORABLE.

I’m excited by your rapid uploads because this is one of my favorite channels!

Привет из России! Great video as always. It's nice that you took time to learn the language. You should come to Moscow Space museum it has many interesting exhibits.

@dos1809

5 жыл бұрын

10 out of 10 great place to be.

@user-yf9vn3gc6l

5 жыл бұрын

bob jones arkhangelsky to be correct

@user-yf9vn3gc6l

5 жыл бұрын

bob jones this is wonderful when people study foreign languages or at least know how to read signs))

@vladimirdyuzhev

5 жыл бұрын

If Scott ever put a foot into Moscow Space Museum, he may have an excitement overload. artsandculture.google.com/streetview/memorial-museum-of-cosmonautics/rgHMfWhWLKyUNw

@user-yf9vn3gc6l

5 жыл бұрын

bob jones ahahaha that's nice one!

early soviet spacecraft are fascinating with the way everything was analogue and yet they managed to accomplish quite a lot in orbit

This was fun, hope you get to do more Inside the capsule tours!

At the Powerhouse Museum here in Sydney we have the engine from Goddard’s rocket, a Saturn V engine, full size replicas of an early Soyuz and Lunokhod-2, real cosmonaut launch suits from Soyuz TM10, their space toilet, unopened food packs from the soviet era, soviet era cosmonaut electric shaver, survival kits for after landing. It is these things that actually flew to space during the cold war that are most fascinating. I have to admit though, it is the Goddard engine that most gives me goosebumps, seeing the way it was handmade. I believe it is the second or third engine he made and flew. I am imagining how you must feel beside that early Soyuz. It would be pure magic. Lucky you.

The 'Globus' navigation system is the most amazing piece of engineering I've ever seen.

Fantastic! Thanks to you we get to see some history that we otherwise would not be able to see! And yea, would love to see a detailed description of all the systems too.

Why did I only just discover this video? This has got to be one of the most facinating and interesting I've ever seen on KZread. Great work, Scott.... good work on the cyrillic too! :)

Soyuz 40 a 7K-T craft and the last of its kind and the last to dock with the Salyut 6 space station, is on display at the National Military Museum in Bucharest in Romania. It's tucked away in the aviation hangar display, still in its charred state after re-entry and complete with its parachute. It is there because on it flew the only Romanian cosmonaut who has been in space, Dumitru Dediu. The old guy who looks after the aviation hangar like a curator and some other parts of the museum is a really cool old eccentric, with lots of stories. In Romanian the museum is called Muzeul Militar National, pretty central in the city and easy to get to on the 85 tramline, has a stop right in front of it basically and 10 lei to get in, about 2 Euro, great little museum.

Hi Scott, I also got to see the Soyuz at the Leicester National Space Centre while I was visiting the UK this past summer. They have a full Soyuz including the orbital and service modules too.

Love this! More of those types of shows would be awesome! Bryan from Vancouver

Very cool exhibit and a fantastic tour!

Wow, what an opportunity! Thanks a lot for sharing 🤩

9:47 the gauge with temperature has "liquid" caption and the second one has pressure in mmHg. The electrical panel on the side has ЗАР. 40A, which seems like заряд, "charge" and НАГР. 80А, which is нагрев, "heating"

@zloyfet

5 жыл бұрын

НАГР for "нагрузка" - load

@UCH2A6aweAXMlymYS8evqS0w

5 жыл бұрын

May be charging current? Because charge should be in Ah or Wh.

I was diying for you to get inside! And you did a fantastic job. Thx 😃

The best video on Soyuz ever. Congrats!

Scott this guy was intimidated by you manliness & knowledge. Great video.

That was incredible, what an amazing opportunity to get hands-on with with an originator of our current space efforts.

Huge balls. The men and women flying in these. HUGE BALLS.

@Marc83Aus

5 жыл бұрын

In soviet Russia, men WITH huge balls fly IN tiny balls.

@drunkensa1lor

5 жыл бұрын

They are usually newer than this one

@Marc83Aus

5 жыл бұрын

Modern Cosmonauts are bigger too.

@Trusteft

5 жыл бұрын

*sigh*

I don't speak a word of Russian but to hear you clunkily translate what you can read to English is absolutely beautiful! I absolutely love being able to see/hear a person's thought process, not sure why lol

@greenbanana311

5 жыл бұрын

+Luke Freeman Because you're a voyeur with psychopathic tendencies?

@dirkdiggler1242

5 жыл бұрын

Green Rabbid Rabbit me too me too

Thanks for this video! It was awesome to be able to directly compare this early model to the TMA-03M capsule in the ESA/ESTEC Museum!

scott manley: the capsule is limited by the size of the rocket. boeing starliner : hold my beer.

This is fantastic! Would love to see more videos like this.

Great video Scott!

Crazy awesome! Thanks Scott!

Great video Scott! Btw, CuriousMarc has very recently uploaded a video where he takes apart this "globus" flight computer / orbit predictor inside the Soyuz. You should give it a watch, it is fascinating!

More this. Amazing footage. I may have misunderstood the nature of some of those controls, but given how cramped the capsule is, it's a little alarming that none of the switches appear to be caged.

Thanks for this really cool insight!!!

so much fun to watch this vid....thank you!

They are perfect in every way shape and form

Thanks Scott. This is one of your most interesting recent videos. If you find learning the Cyrillic alphabet difficult, you'll be amused to know that, after spending time learning to read and speak Russian, it's actually quite difficult to read text in our Latin characters when you first return to it. ;-D That's quite disorienting.

my main problem with premiere is that the comments from before the video was released are mixed with the ones from afterwards

@randomnickify

5 жыл бұрын

Sooo...you are annoyed that you can't be first? :D

@penapvp2230

5 жыл бұрын

randomnickify lol

@Kineth1

5 жыл бұрын

My main problem with premiere is that it doesn't save "watched" status for me.

@Jaybuilderjay

5 жыл бұрын

how can you comment on something thats not releast yet ?

@ColeNetProdz

5 жыл бұрын

@@Jaybuilderjay you can comment while it is waiting be it hours or minutes

Despite i live in country where soyuzes fly, i never knew that parachute located on side. I everytime thought that it located in hatch between command module and orbital module, thank you very much scott for information, now im gonna make model of Soyuz spacecraft for KSP

Very interesting! Those panels and displays and that strange periscope's display are very strange and so beutiful and the same time! :D And as always happen with your vids, now I'm want play Kerbal so much lol! Thank you Scott for another great video! You are the man! :D

Thanks Scott, very interesting !

One strange thing I love about space race era equipments is that they can’t be replicated easily. The infamous statement that we cannot go to the moon again reflected the artisanal nature of the space race. Scientists, physicists, engineers and workers were very hands on. Theories and implementation can differ greatly, requiring improvements that were done through not just expertise but also experience. Many parts and bits were not being fully documented. That gives the entire project a vintage feel, in a handmade sense. It is something that can only exist within that period social economic condition.

Reading, convering Cyrillic alphabet, translating all while reading upside down...truly impressive

@scottmanley

5 жыл бұрын

I did plenty of research ahead of time on what to expect.

Thanks for posting this. I gotta get to this museum as not that far away from me.

Wow awesome this spacecraft is older than me! Very interesting and assertive and pragmatic machine!

That made my lunch break enjoyable.

Scott! Just tripping out how cool you found that... 🚀🏄‍♀️🏎⚜️

This was really informative and really cool to see and learn about an early version of a soyuze capsule, wonder if its possible to get the schematics and build an exact replica, but fresh paint and all and allow people to sit in it, see what its like inside while it sits next to the real thing

Sir, Thanks for very long before asking question to gate this knowledge .

Thanks Scott, way cool!

Mad props on cyrillic reading skills. Had a lot of fun exploring 7K-L1 while studying at University. The one that actually flew around the moon. It looked basically the same)

I visited Moscow in May/June and went to space museum. I saw Soyuz, Mir replica, Vostok, space suits....and many many more cool things there. Space museum was my favorite part of Moscow visit.

My father got to explore one of these back then in the 1990's he was in the Military and was sent to a City in kazachstan where they had to meet the cosmomauts coming back from space. They stayed in a special Military hotel in the court of it was a old soyuz capsule model 7k-t. He looked around it and watched inside of it there were to seats in there and the capsule had a couple of burning Tricks from the reentry. Yeah pretty cool

"Look at the screws on that..." XD love you Scott

Wow, that is all just amazing to look at; especially when you consider that it's a 1960's design. The soviets always liked to over build things too.

Nice video. Its quite shocking the lack of history/documentation about this important space vehicle.

There's a space technology channel that is currently dismantling and repairing one of those orbit/globe calculating machines. Marc Something. Same guys that got an Apollo AGC up and running for the 50th anniversary. They recently did both Soyuz clock modules and are now doing the Orbit module.

Very honest re:- the doubts about its use! full marks for that..and respect!!

@alex_inside

5 жыл бұрын

What else do you expect, so many of them have flown over time that nobody knows if this one really did. In some old Soviet archives, there should be a list.

Scott one item i missed, the Электро́ника МК-52 ' Elektronika MK-52' programmable calculator was one of the backup systems used in the Soyuz. Those things are easy to get on ebay, got the other variants as well.

I cannot believe a slotted head screw flew into space.

@christheother9088

5 жыл бұрын

Old slotted screws were much more resilient than the modern versions. Hardware from the 40's and 50's was surprisingly robust.

@muazkadir

5 жыл бұрын

Probably made without planned obsolescence in mind

@alantownsend5468

5 жыл бұрын

AMEN to that!

@migkillerphantom

5 жыл бұрын

@@christheother9088 the slotted screws on soviet gear tend to be soft as fuck and get dickered when you take a modern screwdriver to them. Maybe the soyuz got better stuff but you never know.

@Kualinar

5 жыл бұрын

The phylips screws where to «American» for the USSR at the time, torks ones where to new and Robertson ones are pretty rare outside Canada. This leave the good old slotted ones.

Great video !!!!

очень хорошо! Nicely done. Very cool tour.

1.7K viewers in 8 mins? Woaaaah!! Awesooome scott manley.

Live stream from the inside with extra experts! YES!

I love looking at the interiors of old spacecraft.

very, very nice, big thanks!

Great story and great job

That was amazing. More please?

So cool! As someone who is interested in all things Soviet, this is fascinating for me. What a fascinating relic of the Cold War, and it’s still in amazing shape for something that hasn’t been used in over 50 years.

Awesome video

Dear Museum: Please give Scott a chance to sit in this capusle and take a look into the instruments. This will be great advertising for your place and a lot more peolpe will have a chance to learn sth. from the not functioning equipment. For your audience nothing will change. Put a TV screen in front of the capusle, that shows Scott's video...

A huge problem with the original Soyuz capsule design was fitting of the folded parachute into that space shown in the video. After the Soyuz 1 tragedy, they had to redesign it, probably including the parachute design, so a parachute could properly fit and deploy correctly.

Very good video!!!!

Thanks Scott, you can see almost every aspect of the systems in this ship, you have nailed a great and informative video here! I admit I would love to see the heat shield detached, maybe one day in the future an owner of this Soyuz may do so! I was born 8 days before Gagarin's Vostock flight. I was very aware of the early Soyus flights, I would be happy to fly in any model of Soyuz and have always felt that way. However as I post this the single commander/pilot and 2 'board operator' Soyuz SM models are in service, so imagine getting a flight on one and taking a pretty, clever date, wouldn't that be nice and you could do and film all sorts of normal important earth gravity things as experiments with the technical challenge of microgravity while taking looks out the window at the Earth... or am I just silly?

I've seen a Soyuz 7K-OK (A) here on display at the National Space Centre in the U.K. It looks so claustrophobic!

This was cool man. :-)

Fascinating!

One of the best videos on this channel. Priceless. - This craft (rather its exhibition) is apparently "closed off" by the museum - why? Is it newly acquired, thus not yet ready for public display? - Are the museum/curator(s) aware of the comment in this comment area by Ilya Dorokhov, supplying vital details regarding the craft?

@scottmanley

5 жыл бұрын

The craft is on display, but there's a perspex window covering the hatch which I got them to temporarily remove so I could stick cameras inside.

@Bill_Woo

5 жыл бұрын

@@scottmanley Thank you. Oddly, it's not mentioned on wikipedia page's list of attractions. I also didn't find it on chabotspace.org but now I see that it's under the exhibit "Going The Distance: Our Reach Into Space" at their site

There is Soyuz 28 capsule in Prague. Muzeum Kbely. Soyuz 28 was the first mission flown by kosmonaut of other than Russian nationality. What a coincidence, that it was Czech kosmonaut Vladimir Remek and return capsule ended up in Czechoslovakia :-)

All of the analog equipment......amazing!

That was really cool.

Got to see a lot of cool stuff like this my first trip to Russia in the Museum of Cosmonautics. Although I am not claustrophobic, I couldn't stand spending a lot of time cooped up in a capsule or space station.

ESA Space Expo at ESTEC, Noordwijk in the Netherlands has the Soyuz TMA-03M on display that brought Dutch astronaut André Kuipers to the ISS in 2011, and back in 2012.

Hey Scott, great review! I saw another Soyuz I guess in USS Intrepid Museum in NYC, any input from that one? Thanks and cheers from Argentina!

8:18 4 years later, the channel CuriousMarc got their hands on one and took it apart to fix it! They've also shown two different Soyuz clocks, and work on tons of Apollo gear as well... highly recommended to anyone who wants more detail on the tech in these capsules :)