Thanks for watching. If you have any ideas or questions please comment. Let me know if you have any ideas for future videos.

@mahendrajailavakusa6896

Жыл бұрын

Have hmm jcj

@AndyGraves

Жыл бұрын

What is that?

Love the freehand way, its pretty much a scribe and as long as both sides stay in place they will always have a perfect match. Great Vid Andy

@AndyGraves

2 жыл бұрын

Absolutely. I've used it a lot lately want it works great. Thanks

the best cutting technique for diy folks, thank you

@AndyGraves

Жыл бұрын

Thank you, glad it helped

Awesome video and your work that you do. I’ve done that before but never raised it so the cut is at an angle. Keep the videos coming🔥🔥

@AndyGraves

3 жыл бұрын

If you have never had an issue with the seam not pulling perfectly tight, you could eliminate the wood strip. Is not mandatory but we find it helps.

Thank you, big help. Much appreciated.

@AndyGraves

Ай бұрын

You're welcome

That’s amazing

Andy, I am glad to see that you gave this method a try. I have never raised the seam area and never had any issues with achieving a tight fit using the free hand seaming method. Over the years it has saved me lots of time.

@AndyGraves

3 жыл бұрын

Hi John, yep it's amazing And works great. The credit goes to you. I also use the shim to avoid cutting into the work table. Especially with employees, it kinda a fail safe way to cut a seam.

AWESOME VIDEO! YOU EXPLAINED SO WELL AND THE RESULT WAS BEAUTIFUL!

@AndyGraves

4 ай бұрын

Thank you, much appreciated.

Wow you make it look so easy

@AndyGraves

3 жыл бұрын

Thanks

Excellent instructive video. Your technique looks to be a real efficient joining technique.

@AndyGraves

3 жыл бұрын

Glad it was helpful!

Just wow

@AndyGraves

Жыл бұрын

Thank you

Very good

@AndyGraves

5 ай бұрын

Thank you 🙏🏼

Good job

@AndyGraves

6 ай бұрын

Thank you

Awesome!!!!! Owww myyyyyyyy

@AndyGraves

2 жыл бұрын

Give it a try.

@TheUofastudent

2 жыл бұрын

Absolutely!!!! Keep them coming , not a lot of professional out there making good content!!!

Благодарю. Супер

@AndyGraves

Жыл бұрын

Thank you

Hey Andy I would like to see a video on how you setup the work tables. I learn a lot from your videos and use them to train employees. Thank you.

@AndyGraves

3 жыл бұрын

Are you talking about the stretchers on the horses that you see in my shop?

@jimmeng1396

3 жыл бұрын

@@AndyGraves yes you seam to have a good system.

Great video. I have a job coming up with this material. First time ever wish me luck

@AndyGraves

Жыл бұрын

Good luck 🤞

I’d love to see your tables or fab stands I need something that holds my stuff in place esp smaller tops

@AndyGraves

Жыл бұрын

I just use saw horses. I'm sure they are visible in my videos. Email me and I can send a picture.

Great video, Andy. Getting ready to do my first project and will need to do a seam so this is perfect! One question: Do you have a recommendation as to which brand adhesive to use (for Corian)? Thanks.

@AndyGraves

3 жыл бұрын

Thank you. Use Corian adhesive that is the correct color match to your countertop color.

@benfbrown

3 жыл бұрын

@@AndyGraves Ah, I misread Corian's webpage and thought they discontinued it....they just reformulated it. Much appreciated!

Thanks for the video. What sort of glue do you use to join corian top?

@AndyGraves

2 жыл бұрын

You're welcome. Use Corian adhesive. Or, there is a link to an adhesive in the video description.

Andy your video is very informative and easy to follow. Would you recommend placing an undermount sink along the seam of the corian countertop?

@AndyGraves

3 жыл бұрын

You could seam the material and then do a sink under it.

@dannyjnobaptiste2898

3 жыл бұрын

@@AndyGraves I’m hesitant as I’m wondering if the seam will be efficient as the seam will be passing where the undermount sink will be installed

@AndyGraves

3 жыл бұрын

Just make sure the cabinets are flat and it will be fine. The Corian adhesive is super strong.

@dannyjnobaptiste2898

3 жыл бұрын

@@AndyGraves what model router do you use?

@johndemtopics1377

2 жыл бұрын

What about thermoforming a sink into the corian first and doing the routing after?

Is the single flute bit needed for this, or just what you had handy?

@AndyGraves

3 жыл бұрын

Yeah, just use a straight bit. As long as it's sharp it should do the trick.

thank you for posting my question is Can I do the seam this way for a table top and make an extra leaf with matching seams and not glue anything? Will the solid surface warp over time? I would like to be able to adjust the size of my top for different settings Thank you again for posting

@AndyGraves

Жыл бұрын

Yes, but put at least a tiny radius on the top edge so it's not sharp

👏👏👏👌👍🤝😎

@AndyGraves

2 жыл бұрын

Thanks

Hey Andy Thanks for the video, I have a question, would and could you do the same with a 3 meters long seam, on a countertop with himacs plates colour aurora Blanc you know with the wavy design pattern, I don’t know if the plates even if they’re in a consecutive order will line up pattern vice when put against each other with the long edges. I’m told do make a freehand router cut in sort of an S shape, Hope I makes sense 😅 What would you do? Best regards Anders

@AndyGraves

7 ай бұрын

Are you trying to make a long seam on material with veining?

What do think about using a wavy router bit.? On short seams , I find that a wavy bit works well . On long counter top sections I typically glue the build ups on first , then glue the tops together on location. Most of the tops I install are 20 feet or sometimes longer. I work at a school district, occasionally I will have 40 feet of work space in 1 run . I have mixed results with having an invisible seam . The issue is that once I route through the 1”1/2 edge the router vibrates really hard and drifts just enough to gap the seam . Do you have any videos or links to videos for technics on seaming with the build up already installed. I’m a big fan of your videos. Thanks for posting.

@AndyGraves

2 жыл бұрын

I do not have any videos of that process. What you need to do is get a big 2.5 HP router and install a square base. Then get a nice straight edge that is actually straight. Next, buy an Amana or equal 2", double flute, 1/2 DIA router bit (Don't use this bit for anything but seams to keep it sharp). Now figure the distance from the bit to the edge of the straight edge and clamp the straight edge so it cuts off just a fuzz of the seam. I'm talking cutting off paper thin material from the seam. Last, apply two layers of 1" masking tape to the bottom side of the router base that is closest to the straight edge. This will create a back bevel on the seam. Now cut the seam SLOWLY through the edge buildup. If you get a crappy cut, barely tap the straight edge over and try again. You may have to block sand the entire edge using a Corian block and PSA 80 grit sandpaper to dress it up a tiny bit. But other than that it will work perfect. Hope that helps

@wesleylindsey728

2 жыл бұрын

@@AndyGraves thank you for the response. I have been using most of your suggestions. I need to add the tape to the 1 side and try cutting less material. Typically I’ve been removing 1/8 “ of material. It never occurred to me to shave off less. I use a festool 2200 router , I believe it’s around a 3 hp equivalent. When doing field work that dust collection is really helpful.

Hi Andy! This video is really helpful. I am about to seam 2 pieces into a 40ft section. It will have a built up lip edge. Essentially a long counter, if the Corian is already sanded and finished. Would I just follow the process of sanding and wiping clean like you did in the video or what do I need to do after I seam that? Just wanting to clarify. Thanks again!

@AndyGraves

6 ай бұрын

Are you asking what's the next step after you glue the seam together?

@devinlopez9253

6 ай бұрын

@@AndyGraves I really that was a confusing question. I did some more research on your videos, I guess my question has now morphed into 2 questions 1) do you think I would be able to blend the finish, wether it’s finished with the scotch Brite pad or polished or would I have to refinish the entire length of the counter to make it blend? I have very little experience with the finishing process. 2) what is your recommendation for finishing the drop edge. Would you just sand it down the epoxy or would you reroute the edge? Thanks again!

@AndyGraves

6 ай бұрын

1. You can blend it to the surrounding area. But you are a novice so it's going to take some more time and patience. 2. Is the drop edge a detailed profile? If it is then just sand the top flat and you can reroute that section of the countertop. Or if it's a simple profile then just sanding it will suffice.

@devinlopez9253

6 ай бұрын

@@AndyGraves thank you! It will be a learning experience for sure. Appreciate both those helpful answers. Will return with results!

@AndyGraves

6 ай бұрын

@devinlopez9253 Excellent, there are other videos as well to help.

❤❤❤❤❤❤❤❤❤❤❤❤❤❤

@AndyGraves

8 ай бұрын

Thank you

❤❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

@AndyGraves

11 ай бұрын

Thank you

What router bit was that and is it good for granites?

@AndyGraves

4 ай бұрын

It will not work on granite. The router bit is in Amana single flute 1 in cutting length 3/8 diameter

@kimchee94112

4 ай бұрын

@@AndyGraves Thanks.

how do you adjust a joint with a cove on?

@AndyGraves

3 жыл бұрын

It's hard as hell. So we typically build the top and then cut all the deck seams. Then we check the template to make sure it's a perfect fit. We set clamp the seams together and then glue on the cove back splash. To adjust after, we flip the top over and cut off what wee need using a straight edge and router. But it's very difficult to get it perfect.

I same work Saudi Arabia

@AndyGraves

Жыл бұрын

I love it

Ehat about solid white countertops. Would the seam show?

@AndyGraves

Жыл бұрын

No, it would not show even on a white color.

Would this work for corner seams?

@AndyGraves

Күн бұрын

Sure it would.

What is the glue that is used and where can it be purchased.

@AndyGraves

Жыл бұрын

I used Artisan Adhesive.

Does it work with quartz

@AndyGraves

10 ай бұрын

I've never tried it on quartz.

I wish it could be the. Same. In quartz

@AndyGraves

8 ай бұрын

Yeah that would be awesome.

Why do I need a router? Can't I just cut using a circular saw if I use a guide and a fine(er) blade?

@AndyGraves

7 ай бұрын

Sure you can but it won't be a perfectly tight seam.

@jimboriotti8272

7 ай бұрын

@@AndyGraves Not to be ignorant, but why not? If I use a diamond blade, move slowly, and (super)fine sand the edge? I don't have a router, and don't want to purchase one & learn how to use it for a one-time job if I can get by with a circular saw. This is for our old corian counters, which we moved to the basement. I need to trim them down a bit, to fit.

@AndyGraves

7 ай бұрын

Oh no, you can cut it with a saw. A seam is just better when you cut it with a router that's all.

How to find someone. Who can do work on corian San Jose ca

@AndyGraves

3 жыл бұрын

Type in solid surface fabricator near me and local places should come up.

How can I find someone who knows how to seal 2 pieces of corian together Morgan Jill can

@AndyGraves

3 жыл бұрын

Do you have a crack and need them glued back together?

@chrgdsolar7782

2 жыл бұрын

@@AndyGraves I have a crack in my WilsonArt solid surface counters. What do you use for the glue?

@AndyGraves

2 жыл бұрын

@@chrgdsolar7782 Click on a link in the description and it will take you to Amazon. The search for Artisan Adhesive. Keep in mind you need the exact color adhesive that matches your material.

@chrgdsolar7782

2 жыл бұрын

@@AndyGraves Thanks. I tried searching for it but couldn't find it. The color is Antique White 1572SL. Any other recommendations?

@AndyGraves

2 жыл бұрын

@@chrgdsolar7782 To confirm, your countertop color is antique white?

Just push the seam together, cut with a tracksaw.

@AndyGraves

Жыл бұрын

That works, it's just not as tight as when you route it.

Why don’t you just use a straight edge and run the router from that ?

@AndyGraves

2 жыл бұрын

You can but if you're using veined material the dream will look much better.

Why on earth would you not use a straight edge ? Also why are you parking up the joint ?

@AndyGraves

3 жыл бұрын

It can help hide seam lines in veined or patterned materials. Parking up the joint? Not sure what your asking.

@fpoastro

3 жыл бұрын

A wavy seam is by far the best seam in the world for hiding joints especially on heavily grained/textured material. The wavy in this video is tiny. You should see some seriously wavy seams. Like a random wet noodle. Pretty much invisible on brutal material.

@unamor

2 жыл бұрын

This was my exact question and their answer blew my mind. Everything makes sense now! Thanks

Oriental fabricator job number

@AndyGraves

Жыл бұрын

What does that mean?

Yo bro your bits a little dull

@AndyGraves

Жыл бұрын

Is this you being helpful?

I still don’t get this 🙈how’s does it not run off with out a guide

@AndyGraves

Жыл бұрын

It's the path of least resistance. The but will track right down the middle with it kinda moving side to side a little as you pull it through. But it's always cutting both edges.