Putting the hole saw in reverse for the first little bit after you sink the pilot bit helps alot

@Redrockat

4 жыл бұрын

Awesome thank you I will try that style 😊

I honestly wouldn’t remove that for 2 extra hp.. it’s seadoos only air filter. It mayn’t be for that exact purpose but if anything large somehow made its way towards the engine this would atleast stop it

To any that may think the Riva upgrade kit is expensive - Struggling to remove the flame arrestor for 3+hrs then risking debris entering your engine or damaging throttle body flange makes the Riva kit quick, easy and well worth it.

@thepunisher3597

6 жыл бұрын

literbikedoc you would have to be an idiot not to clean it before installing... compressed air will clean it right out.

@literbikedoc

6 жыл бұрын

Really ?? you don't say!? Takes quite a while to get it ALL out bud!!

@IHadToMakeThisAccount

3 жыл бұрын

It makes me laugh how people buy a $16,000 toy and are to cheap to spend money on the parts

Do seadoo gtr 215 have this restriction?

Redrockat amazing video …what upgrades do you recommend best on a 07 seadoo wake 215

@Redrockat

2 жыл бұрын

Hi there , a Riva 215 drop in wheel and injectors and also a Riva Intake . Then a impeller to match new power level . This will make for a awesome PwC 👌 if you haven’t yet done the super charger service kit then do that as well to make sure the new drop in supercharger impeller runs well .

Hello, I have a seadoo challenger 180 is 255 hp of 2011 is what I can do without having to reconfigure ecu Thank you

@Redrockat

5 жыл бұрын

jack horcet yes you may remove it and you can change your 76 millimetres intake to 100 millimeters intake we have done it with great success

@zoloublanc

5 жыл бұрын

@@Redrockat OK, I'll do it and tell you the difference by doing the tests. Thank you

@Redrockat

5 жыл бұрын

jack horcet awesome 😊

What size hole saw is used for this upgrade?

@Redrockat

4 жыл бұрын

The one that is supplied with the kit of course 😊 this is a 260 seadoo manifold and uses a 79 mm hole saw .

@mike04ify

3 жыл бұрын

Redrockat the 260 and 300 are the same manifold except for the sensors

How much for a manifold like that one ?the one for more boost ?

@Redrockat

3 жыл бұрын

michael garcia that is a custom built manifold from Australia , the Riva High Boost Billet Manifolds are from $3000

@mike04ify

3 жыл бұрын

Redrockat yes I know do u guys sells them?

@Redrockat

3 жыл бұрын

michael garcia no we don’t

is this screen in all seadoo manifolds. I have a 2004 seadoo gtxltd superchargered is that screen in my manifold

@Redrockat

7 жыл бұрын

Hey ,your ski does not have a screen in your manifold. It has a intercooler in there . The restricter screen only started in 2008 skis . you will see that there are two copper pipes coming out of your intake manifold ,they are for the cooler .

Hey sir did you notice any diferrence in power after this mods? Thanks

@Redrockat

3 жыл бұрын

Yes more throttle response for certain and some more power with that

1 year later 😅 i definitely not recommend this mod ! 😁 if your SC propeller blows up 😁 yes you know what happens 😁 This mod definitely gives a noticeable throttle response 😎👍🍺 at a higher risk 🤣

@Redrockat

2 жыл бұрын

When the supercharger blade blows up there is a whole charge cooler the debris end up in . It’s the fine aluminium powder that causes more damage that gets infested by the motor even if the stock intake restricted is in place . Also when the super charger blade breaks bits and pieces end up in the engine oil and gets chewed up by the gears and oil pumps with or without the intake restriction. So I say take it out 😎☝️👌 and enjoy more power , after all we only live once .

Hi does a 2006 rxt have the filter in the manifold?

@Redrockat

7 жыл бұрын

Only since 2008' 255 hp skis started to get the restricter . your 2006' ski has a intercooler inside the intake manifold ,you will see two copper pipes coming out of it as a confirmation.

@brettforbes7642

7 жыл бұрын

Yes you are correct thanks. Is it fare to say if I add an external ic I then can remove factory ic from there and have similar result?

@Redrockat

7 жыл бұрын

+Brett Forbes Yes ,you are going to get much better results due to the fact that your stock cooler is more restrictive . The external ice is much more efficient.

@juanmanuelcardinaux2634

6 жыл бұрын

Brett Forbes hello from Argentina, i'm dedicated chiptuning and remap ecus , i have done a couple sea-doo GTI 130 and have great results, but i want to know it is posible use this kit for Seadoo 130 and 155 , calibrating mixture air/fuel ? Do you think that it's possible?

@juanmanuelcardinaux2634

5 жыл бұрын

@@ouvido-absoluto hola , cómo estás?. Déjame un correo y te envío una lectura original para que puedas verla, no creo que puedas hacer el trabajo con ese programador, yo uso ktag, el gq4 es más bien para hacer inmovilizado offo programar memorias, los mapas están en el micro.

What are the benefits of this mod ?

@Redrockat

4 жыл бұрын

According to the book specs it allows for a little more boost 😊

@mariusfauru

4 жыл бұрын

@@Redrockat im doing it this weekend 🤪👍🍺 the cheap way 🤣🤣🤣

@Redrockat

4 жыл бұрын

@@mariusfauru use a extra long nose pliers and a flat point screw driver , and take care not to damage the intake manifold please 😊 more boost and throttle response on its way 😊

@mariusfauru

4 жыл бұрын

@@Redrockat today i removed the intake and started to pry out the restrictor, but its coming out slowly in small pieces 😁 around 30% out 😅 not that easy as i thought 😁 but im doing it 😅👍🍺

@Redrockat

4 жыл бұрын

@@mariusfauru awesome , slowly and easy does it ...be patient 😊