on the green deadbolt with the deadbolt rear in the front, the lower links are 68mm, use c10/jeep/bronco rear lower links (58mm) on the upper front to correct the servo pitch

Some of the best upgrades I’ve seen amazing all of them.

@tcbrc7555

Жыл бұрын

Thanks buddy..

Thanks for the inspiration! 👍🏽 this is ultimately the look I want my C10 to have. Real nice, sir 🤙🏽

@tcbrc7555

Жыл бұрын

Thanks man..

Very well done mods. New to the 1/24 scale here. Just got the C10.

@tcbrc7555

Жыл бұрын

Thanks bud

Thank you for sharing your videos. Watching with full support from Canada 🇨🇦.

@rjlinnovations1516

Жыл бұрын

You’re welcome 🙏

@tcbrc7555

Жыл бұрын

Hey appreciate it

Rigs look great, I have mostly 1/10 scale among other RCs but these are great to have and detail. I enjoy this hobby but it's like getting a tattoo, once you have one, eventually you'll get another and another lol. Thx for sharing. 😉👍

Hell yeah brother I just found you pretty cool man checked out a few of your videos. Going to have to check you out some more.

Nice rigs I love them and great video!

@tcbrc7555

Жыл бұрын

Thank ya bud..

Great job my friend!!🤩👍👍👍 I had a friend build a Dead Bolt after seeing your video. It is very wicked!! I have done the front on my C10 with a extra set of stock C10 rear links. *You changed the game with this stuff* !!🤜🤛 💢Subscribed💢

@tcbrc7555

Жыл бұрын

Appreciate it buddy

I have 2 scx 24s (jlu and gladiator)and I have a turbo rzr and I see the correlation for sure. And agreed both are expensive but enjoyable. Great vid Cheers

Very cool! This is a fun hobby I come from an ATV background as well but this is way easier on the wallet to modify! lol

I like how you extended the deadbolt body I think looks super cool. I’m watching from Manchester Michigan, I did just subscribe I’ll be following for more, this is the beauty of this awesome hobby yeah love it

@tcbrc7555

Жыл бұрын

Right on buddy greatly appreciate it.

Very cool, just got a SCX24 deadbolt myself. I have been doing RC for a long time but totally new to the 24th scale. Very much like what you have done with yours, the stretch look is awesome. A fellow E. Tenn resident as well!

@tcbrc7555

Жыл бұрын

Right on buddy appreciate it..

Thanks for sharing, very helpful

@tcbrc7555

5 ай бұрын

Yessir glad I could help..

@1rcbking

5 ай бұрын

@@tcbrc7555Sorry if I missed it, but what did you do about the drive shafts, Thanks again

@tcbrc7555

5 ай бұрын

@@1rcbking used the driveshafts that goes with the links

Yeah that was nice, yeah I can see big difference awesome

Good to see you here brother. Good meeting you!

@tcbrc7555

Жыл бұрын

Hey Yesssirrr same here..

That's one of my biggest gripes when you install long travel shocks. It's great for articulating but not so good on climbs and it jacks up your ride height. I had to reposition my shocks to bring it down a bit

Great stretched SCX24s bro! One of my builds...MAD MAX...has the deadbolt rear on front and its perfect articulation. And yes it's still 1/24 scale all day long.

@tcbrc7555

Жыл бұрын

Hey appreciate it buddy thank you..

I don't know if they do it for all of them but I ordered a c10 a while back. Well they sent the deadbolts driveshaft with it, Just got a deadbolt less than a week ago and it came with a c10 driveshaft! Ordered high clearance links to stretch the rear of the c10. I thought I was going to have to order another driveshaft but the one that came with the c10 fits perfectly! Have some c10 injora high clearance 4 links coming in Wednesday to stretch the front of the deadbolt as well. Hopefully the driveshaft that came with the deadbolt fits the front as its a little loose when the suspension is maxed out.

That car is so cool

Good video m8 ❤

@tcbrc7555

Жыл бұрын

Thanks bud..

I like the wheels on the green c10

@tcbrc7555

Жыл бұрын

Appreciate it bud SSD beadlocks.

@jjcole8192

Жыл бұрын

@@tcbrc7555 thank you

@tcbrc7555

Жыл бұрын

@@jjcole8192 yessir

I'm fairly new to this hobby but my understanding is that a short wheelbase gives me maneuverability/tight turn radius and less chance of high centering or belly rubbing but a long wheelbase gives me a better climber with less chance of flipping backwards?

"I stretched his rear" you had to of worded it like that on purpose man 🤣🤣🤣🤣

I am building a Betty from the ground up and I am using gladiator links and a Jeep jlu frame. I love the long wheel base because it does the best crawling imo. Short wheel base is good for missing, the long wheel base is good for a belly dragger that can climb the world

@tcbrc7555

Жыл бұрын

Yessir…

@D-ayytoodap-yay

11 ай бұрын

I have built 4 new crawlers for myself since I commented on your video and all of them are gladiator link trucks with shorter lcg chassis. The longer wheel base is the best way to go. I have a couple c10s and they are not stretched and they have nothing compared to the gladiator length trucks. I run brushless furiteks on most of my rigs and I will say that nothing is like a brushless truck with the longer wheelbase.

@tcbrc7555

11 ай бұрын

@@D-ayytoodap-yay right on buddy…

If you need little nuts like that, just drill little holes in pieces of plastic. Plastic is usually soft enough to self tap with the screws.

Bad A$$ - great content!

@tcbrc7555

Жыл бұрын

Thank ya sir..

It’s to scale for sure. Winding if those are the rc lions 48 mm shocks under it(green deadbolt)

@tcbrc7555

Жыл бұрын

No sir it’s 43mm from Injora.

Really nice vidéo 👍😉 good job my Friend 👍

@tcbrc7555

Жыл бұрын

Hey appreciate that thank you.

great my friend!

@tcbrc7555

Жыл бұрын

Thanks buddy…

What do you do with all of the front links and driveshafts? Can you get just the rear ones?

I bet that Kawasaki is fun , i got a plate on my viking and go everywhere here in Tennessee, nice scx24 's , i love mine

@tcbrc7555

Жыл бұрын

Yeah love the Kawi. We mainly ride at Windrock but on occasion venture out to Royal Blue, Tackett or Brimstone.

Bumper bracket is what it’s called, I see you flipped it to put the bumper up higher. They have a relocation bumper bracket I got a couple of them for my bronco it just bolts to the frame and straight out instead of Dropping down then out works great

@tcbrc7555

Жыл бұрын

I’ve been debating on losing the bumper on my bronco but I may get another bracket and try it don’t wanna lose the bumper but it seriously gets in the way.

If you already have metal drive shafts on c10 the rear drive shaft works with rear bolt links. Don't do what I did and buy deadbolt shafts as not needed.

@tcbrc7555

Жыл бұрын

Didn’t realize c10 rear shaft would work so yeah I’ve got a deadbolt rear shaft on both..

Not sure if you figured out your flipping problem on the red deadbolt yet, but I think using some limiting straps at the center of the front and rear axles really helps. As long as you put them in the center (I use fishing line) then you can keep the long travel of the double barrel shocks but keep both sides from extending all the way at the same time.

@tcbrc7555

Жыл бұрын

Hey thanks for the advice but if you happen to check out some of my other vids you’ll see that I’ve done that..lol

@CoolHandLukeZ

Жыл бұрын

@@tcbrc7555 oh nice, sorry I haven't seen any others (yet!). Was just looking at ideas for stretching my Deadbolt and came across your video. I want to stick my Deadbolt body on my Gladiator chassis since I like the look more, and use the Deadbolt chassis for my various harbodies (got the new FJ40 hardbody and have had a Jurassic Park Wrangler toy on that short wheelbase as well).

@tcbrc7555

Жыл бұрын

@@CoolHandLukeZ hey I gotcha buddy..

@LuisChavez-lf1gf

Жыл бұрын

Can you use the high clearance links for the swaps or does it have to be regular links

Hi say it’s still scale, we just make them our own. And as long as I’m happy with it is all that matters. Now let’s get outdoors and have some fun yeah 👍👍😎

@tcbrc7555

Жыл бұрын

You know that’s right…lol

Will the red deadbolt front bumper bolt up to the bronco frame? What model and where did you get that bumper? Also where did you get that peace sign american flag sticker on the side of the red deadbolt? Thanks for the help

@tcbrc7555

Жыл бұрын

Got all 3 from Amazon.

How bout them gladiator links 😍I have a set I’ve been thinking about putting on my c10 also building up a chassis so maybe on that.

@tcbrc7555

Жыл бұрын

Yesssirr but your rear tires would be out past the tailgate..lol

When you're attaching rear links to the front, how do you connect the 2 upper links where the y link goes? Do they just bolt to the outside rather than in between?

@tcbrc7555

Жыл бұрын

Yessir that is correct both sides are threaded.

@Mattyteze

Жыл бұрын

@@tcbrc7555 awesome, thank you for this video. I'm currently 3d printing c10 front links for my Deadbolt.

try using rear gladiator links and shafts for the front and rear of any scx24 and its killer 😜 thats what i run

[love it. which rear links are longer, C10 or deadbolt?

@tcbrc7555

Жыл бұрын

Deadbolt rear links are longer than C10.

@lgrc6120

Жыл бұрын

C10 60mm rear Deadbolt 70mm rear Gladiator 80mm rear Roughly 1or 2mm off

Hey man! Could you give me some advice on how to replace links to make it longer? I have a deadbolt and as you know, the front links stock are very short. Thanks

@tcbrc7555

Жыл бұрын

Not sure what else to tell you…lol

So the longer wheelbase scx24’s need the deadbolt driveshaft for the rear ?

@tcbrc7555

Жыл бұрын

If it has deadbolt rear links yes.

Add some will wait to the front of that thing even with a shorter wheelbase you should probably still make it

@tcbrc7555

Жыл бұрын

All these RC’s have metal portal axles and brass wheel inserts, brass boulder bars.

C.an you send links for the parts please I'm building an scx24 bronco and I'm top heavy as hell

Stretched his rear means something completely different in prison.

@tcbrc7555

Жыл бұрын

Bahaahaa. Good thing I’m not in prison I guess…lol

Ok Bud, I subscribed to your channel on this, the 1st of your videos I have seen, within the 1st 2 min. I hafta ask 1 favor, can you start referring to your rc's in the feminine sense? It just sounds weird to hear you keep saying ya stretched out "his" rear end! 🤣 jk, kinda. I got the Gladiator about a month ago and the Power Wagon I just got like 4 days ago. I ordered the stretch links for the wagon but they haven't been delivered yet. My next buy will probably be the C10 and after that Deadbolt. My cart on Amazon is holding about $3000 in rc trucks and upgrades. 🤣 Looking forward to more vids and I will probably join your other channel as well. ✌

@unogno

Жыл бұрын

I also have Traxxas TMax and Redcats Earthquake, Arrma Big Rock, I got 1 for my daughter called Vanguard and a cheap crawler. I am liking the 1/24 scale better the the bigger and faster rc's.

@tcbrc7555

Жыл бұрын

Hey thanks for subscribing. Yeah didn’t realize what I was saying probably cause sexual thoughts don’t enter my mind when messing with the RC’s but hey I can see the humor. I’ve had the FMS Power Wagon for several months now and put the rear stretch on when I first got it. Put it on my course and took about 5 minutes to strip out the driver front portal gear.

Is this Matt??

@tcbrc7555

Жыл бұрын

Nope..