Just finished my Deadbolt to Warthog conversion this morning. Couldn’t have done it without this tutorial. Thanks.

@HostileHern

2 жыл бұрын

I know the deadbolt has a different wheel base did you have any issues with that ?

@rickysiebert9618

2 жыл бұрын

@@HostileHern Not at all. Fit perfectly.

i will most definitely be having this video up when i put mine on

That is truly badass. Well done!

Dude thanks so much for the video, supper helpful and completely reasonably easy to follow. I’m just pricing out what it would take to make one of these, fully pimped out how yours is and everything.

My build is in progress. Some notes: I'm moving my battery to the front and my electronics to the rear. The shocks rub against the chassis and cause binding. You can invert them and then trim the retainer to solve that. If running a larger motor (Torquebeast 2.0) the rear upper link hits the end of the motor can and wont allow the suspension to come to full rest on that side and the rig sits cockeyed. To make it work properly I had to make custom bent upper links for the rear. I used the LGRP (or Shapeways) rod ends and the stock link ends (cut off of the links) to make them.

Just finished building mine, made a post of it on the SCX24 subreddit. Such an amazing chassis to build, and thank you for having the files available for purchase for us with 3D printers!

@CineMoto24

3 жыл бұрын

Of course! Thank you for the support!

@Space_Naught

2 жыл бұрын

@@CineMoto24 is there any update on the brushless version?

@CineMoto24

2 жыл бұрын

@@Space_Naught I am currently waiting on another brushless system from Furitek so I can design it for both the Surpass and Komodo. Sorry for the delay. It will be available as soon as I receive the product! Thank you,

@Space_Naught

2 жыл бұрын

@@CineMoto24 thanks for the update! Ill be waiting for the release.

@brentman87

10 ай бұрын

Where can I buy the file?

Couldn't resist, Ordered my Warthog and a SCX24 today, and I can't wait to get mine up and crawling.

@CineMoto24

2 жыл бұрын

The green one? I just started printing it! Thank you!

@boopernator

2 жыл бұрын

@@CineMoto24 Yep the green one. looks like it shipped might have it by Monday. I picked up an Axial SCX24 Chevy C10 today. The Jeep version I ordered might have been lost by USPS.

Just received my blue Warthog over here in Michigan. Thanks Shane. It's great. I've been seeing them in videos for a while. Just couldn't move it high enough on my list til now. Can't wait to install it. Thank you for a great, simple, well thought out option. I have been creating all sorts of designs in my head for some time. I will hit you up when I make some. Don't think I can beat what you have done, but it will be fun to try.

@JFlyer1973

2 жыл бұрын

Hey I’m in MI too. SE MI. My son and I run Deadbolts and I’m really wanting this kit. Have you built yours yet? Any trouble getting the extra bits to complete? Would like to hear how your build went if you don’t mind sharing.

I make 1" or more extension for the battery lead. Makes it easier to unplug. ESC case seems to be in its own way. Good video.

Rite On I think this is definitely the best thing to get the most out of the 24! And it looks Good,so on the wish list it goes,when that really happens,well like everything in this life, As soon as dream stage of sleep hits! Would love to support This is My only,Dont waste a smart mind,please keep,make RC Even Greater

I recently purchased the files off cults3d, printed this out and built it up yesterday. THIS is the most capable scx24 I've had, thank you! With scrambler tires it can still go over anything, although it hits the shock reservoirs during tight turns, I need to get some more standard sized tires

@CineMoto24

2 жыл бұрын

Awesome! Glad to hear you are enjoying it! You could also get some axle extensions to widen the stance if you want to run the larger tires!

@damienjost2112

2 жыл бұрын

@@CineMoto24 but you talk so highly about the wranglers, I have to buy them now :D

@trevortopolay1361

2 жыл бұрын

@CineMoto I just printed a kit from your files. Looks awesome. What size screws donyou use to build the chassis? And where do you get them?

@damienjost2112

2 жыл бұрын

@@trevortopolay1361 M2 x 8mm, you need 14 of them, I bought a pack of 50 off amazon

@CineMoto24

2 жыл бұрын

@@trevortopolay1361 m2x8mm you can get them anywhere including amazon

Very well designed, and so clean 👌

you should make an option to this chassis where it has body posts so someone could still run a body on it if they wanted.

Would like to see you build a Trx-4! Your awesome dude

Great video bro 💯 Like #4

I was looking for a guide on how to 4 link the Jeep, this was helpful

Currently building mine. I was wondering if you're essentially replacing the rear shaft after you move it, wouldn't it be easier to line up the new shaft with the stock rear for measurement to make it the same length?

Thanks for the video i love it, and want One but delivery costs more than the chassi 😢

Thanks for that great video! Just build my second Warthog after 2 years break. Will there ever be a new design/version ?

Hi. Thanks for your building video. Could you kindly please let me know the dimensions of the front and rear upper links ? Thank you

I got a pipe cutter tool that makes drive shaft cut easier

Have you tried or do you know if your chassis, with the battery on the bottom like you have, or even on the top side, will allow a second front axel/servo in the rear for 4 wheel steering?

cool video

Can I do this to my deadbolt?

I'm prolly going to buy one of these and see if I can jam a torq CL 0508 servo on it . Thoughts on fitment? Is this updated to fit brushless or outrunner yet ? 🤔

Luv mine big fan

When using your Warthog High Clearance Links, is it necessary to cut the drive train? Which linkages go on top?

I have a brand new C10 and I just ordered your kit for now can I switch all the parts over without really needing much and then slowly upgrading as I go

will this work with deadbolt parts? im making a stretched out "2 rear links for the front and rear from a deadbolt" scx

The link for the pillow balls seams to be incorrect. Can you send a new link please?

Just ordered one chassis, any chance you know the dimensions on the drive shafts? I have metal ones, looking to see if there is something out there with the right dimensions. Thanks!

Did you print the Warthog in PLA or PETG? The longer links in the JL kit are they the rear links from a deadbolt?

Bought mine and printed it up! Watched this video late last night and installed on my brand new deadbolt. Everything bolted right up, had to modify the rear chassis side shock mount slightly with some new holes because the extended length of the rear of the deadbolt. Also, I only installed the extra driveshaft to the front, no cutting necessary. Testing it out this weekend next to my other 3 scx24s! Thanks again for making an awesome product

@CineMoto24

3 жыл бұрын

Awesome! I haven't owned a deadbolt yet but I'm glad you got it working with it too! Hope you enjoy it. I'll warn you though. It makes crawling so easy it takes some fun out of it!

@milo9429

3 жыл бұрын

@@CineMoto24 yes! It does! Haha. I have all of my 24s with me on a trip this weekend and even playing around with them tonight it is crazy capable compared to my other very built deadbolt, stockish deadbolt and c10 on dually rears.

@wille2075

2 жыл бұрын

I just finished doing the deadbolt to warthog conversion. I don't have/can't find spare parts that came with my scx24; no long drives haft other then the one for the rear. I ended up swapping using the links that came with the Axial package listed in this video. Now it has a forward tilt when sitting on flat ground.. Trying to figure out how to resolve now.

@CineMoto24

2 жыл бұрын

@@wille2075 That is unfortunate that you cannot find your parts. For the deadbolt you must replace all 8 links as it uses different stock links than the Jeep. All lower links for the warthog must be the 60/61mm links and all uppers must be 50mm. Hope that helps!

What shock length is best for this chassis? Stock length or the 43mm?

will this work with your high clearance links as well or are they only for non-warthog installs

I just ordered the Warthog Chassis from Etsy to swap with my SCX24 Jeep body. I am running the Furitek Komodo Brushless set up. Will the Warthog Chassis accommodate this set up.

Can you please add a link to ebay for those pivot balls you use for your conversion??

Any chance of something like this coming out for the trx4m?

Do you know when you'll have more kits available for sale, thanks

@CineMoto24

3 жыл бұрын

Just added more!

I like the look of it much more the the upturned nose version. Great install video. Question: what is the space available for a larger motor? an 050 can? Any larger brushless fit?

@CineMoto24

3 жыл бұрын

050s fit although brushless setups do not yet. I am currently working on a surpass/Furitek version.

@bcochener

3 жыл бұрын

Awesome. Thanks for the quick reply! I look forward to seeing the brushless setup you come up with. Very interested in this little kit.

@luden9950

3 жыл бұрын

@@CineMoto24 im very interested in a surpass verision!

@bcochener

3 жыл бұрын

Ok, I ordered up one finally! Can’t wait to get this up and running. Going with a Mofo RC 050 can in this build to get a brushed motor back in the collection.

@rockwolfdesigns6384

2 жыл бұрын

How do you like the MOFO RC 050. I got the Torquebeast 050 from MOFO. I installed Yeah racing fr/rr axles, very beefy. The pin/dogbone in one slipped out of place andbound the axle. That Torquebeast twisted the axle like a string.

Please ship to Australia!!!

I am curious why you made those links you provide with the kit or file, whats the advantage over a set of low clearance links? I am getting confused with your exchanging of links here, also just looked into my still sealed bag of the C10, there are no links, just a drive shaft. So i think i will buy (or find in a box) a set of high clearance links and use those. Still confused, you seem to use C10 rear lenght links for front and rear ?

@CineMoto24

Жыл бұрын

They allow the crawler to have more clearance under the links and is less likely to get hung up! But yes, you use C10/JL rear links both in the front and rear. Axial must have stopped including the additional links in later models. Thanks!

Sorry this is probably a noob question but why does the 4 link improve flex? And is it possible to run it with out? how much less flex is there?

@willemrulesatstuff2153

Жыл бұрын

It reduces friction on the driveshaft

Can you put the measurements of what each of the suspension links in the bio? I'm having trouble knowing which ones to use

@CineMoto24

2 жыл бұрын

Sure the lengths should be 58.5mm for the bottom links for the front and rear and 51mm for the top links for the front and rear.

@kylefrancis7935

2 жыл бұрын

Thanks

I want to buy one but I want to know can I change the steering servo and will a different motor fit?

@CineMoto24

2 жыл бұрын

Yes, you can run all standard servos, also you can run either the stock motor, 050 can motor, or outrunner brushless setup.

what size is the extra blot you need? The one that you said comes with diff covers?

@CineMoto24

Жыл бұрын

I believe they are roughly 6mm in length. Standard SCX24 hardware though. If you need one to measure, you can just check one of your bottom diff cover bolts! Thanks!

I didn't hear you say anything about it but will it work with the outrunner motors such as furitek or surpass?

@CineMoto24

2 жыл бұрын

Not yet, I am waiting on a furitek komodo and then I will be designing one that is compatible with both. Stay tuned! I hope to have that done soon.

@jaredthompson8188

2 жыл бұрын

@@CineMoto24 Sick, I'll be waiting!

What size hardware do you use for that actual 3D printed parts. They look like a different size than the actual scx24 screws

@CineMoto24

Жыл бұрын

The hardware is just m2x8mm bolts!

Random question. I was watching this video and installing all of my parts. And now it seems like the front is dragging inside the differential or something like that. When I give it gas it has a lot of torque twist and I want to hit reverse a torque twist the opposite way but only in the front. Also the whole thing seems to be slower than normal and the motor was getting super hot

@naticen

2 жыл бұрын

Your wheel nuts might be too tight

@jasonbyrd5150

2 жыл бұрын

@@naticen it was.

@jasonbyrd5150

2 жыл бұрын

Thanks.

i just put my warthog chassis on last night and i was wondering what wrench size or alan wrench to remove the motor is

@CineMoto24

3 жыл бұрын

Are you referring to removing the motor from the transmission? I believe it is a 1.5mm wrench if I recall correctly.

@gaveny725

3 жыл бұрын

@@CineMoto24 is it an alan wrench

@CineMoto24

3 жыл бұрын

@@gaveny725 yes, it is.

@gaveny725

3 жыл бұрын

@@CineMoto24 thanks

Can you only do this to a c10 or jeep? Because I have a deadbolt and want to do this.

@CineMoto24

3 жыл бұрын

This would work with a deadbolt although you would most likely have to replace all stock links and driveshafts due to the length differences but it can certainly be done!

@blazinghillie

3 жыл бұрын

Mine was done with a deadbolt. No issues and thing is wicked.

@connorthegrommer5541

2 жыл бұрын

@@blazinghillie what all did you have to change for the deadbolt?

@blazinghillie

2 жыл бұрын

Top links and driveshafts

With this chassis am I able to use aftermarket high clearance links such as treal or injora?

@CineMoto24

10 ай бұрын

You are! They just need to be 61mm for the lowers and 50mm for the uppers. Front and rear. This is the same stock length as the rear of the Jeep jl or Chevy c10.

Can you still use flex blades for more flex?

@CineMoto24

3 жыл бұрын

I’m sure you could! Personally I have one setup with double barrels too but I prefer the stock shocks to keep that cg low.

Why are there no videos to show and tell how to assemble the chassis itself, would be handy, I bought your files and had them printed and none of my stock screws work to assemble the chassis. Why is this happening???

@CineMoto24

2 жыл бұрын

I am sorry you are having issues. As stated in the cults3d description you will need 14 m2x8mm bolts to assemble the chassis. It can be assembled based on photos after that. If you need additional help feel free to reach out to me on etsy or FB. Hope you enjoy!

@marcusburau7227

2 жыл бұрын

@@CineMoto24 oh, ok, I must have missed that. Thank you for replying. Just out of curiosity will you please make a video of putting the chassis together?

Tires keep ripping off the shocks. Any help would be great

@CineMoto24

2 жыл бұрын

You have to run offset wheels to get the full turning radius or dial back your dual rates. Either will do fine!

@thomasborton7211

2 жыл бұрын

@@CineMoto24 any tires and rims you recommend

the stock screw heads strip so easy on mine do you have any tips for that

@CineMoto24

2 жыл бұрын

Yes! Use a 1.3mm driver such as this one. Once I started using it I never had an issue. chadstoolbox.com/05118064001-wera-2054-micro-1-3-x-40mm-hex-driver/?gclid=EAIaIQobChMI-bDj-IG99QIVU_LjBx02mg0AEAQYASABEgKZjvD_BwE

@TylerJ54

2 жыл бұрын

@@CineMoto24 thank you

@ethanh3421

2 жыл бұрын

@@TylerJ54 they’ve also got sets of better screws for the whole chassis

@TylerJ54

2 жыл бұрын

@@ethanh3421 ya i ended up getting those to

Where did you buy your wheel nut wrench? I'm assuming it is a 2mm nut driver? As well, where did you buy your allen wrench? Again, I'm assuming it is a .05" wrench? Please and thank you. Thank you for the 3D printed files as well as this video!

@CineMoto24

2 жыл бұрын

The wheel nut wrench is the RC4wd wrench that is included with their stamped beadlock wheels. They also sell it standalone here: store.rc4wd.com/RC4WD-40mm-Metric-Hex-T-Wrench-Tool_p_5535.html The driver I use is this one right here. By far the best for these little bolts! www.amazon.com/Wera-05118064001-Kraftform-Electronics-Screwdriver/dp/B003ES5MDU/ref=sr_1_5?crid=2UIPLCTXUZ56R&dchild=1&keywords=1.3mm+hex+driver&qid=1632139406&sprefix=1.3mm+%2Caps%2C174&sr=8-5

@claytonplummer9509

2 жыл бұрын

@@CineMoto24 Awesome and thank you for the reply with the links to the wrenches. For the chassis - I ended up purchasing your print plans and printed my own warthog chassis in purple PLA. Came out great! Thank you again! Now I'm just waiting for the screws and Axial parts to arrive to put it together. I also ordered a set of the RC4WD stamped steel wheels. So, I'll wait to see if I get a wrench with mine. Clayton

Do you think petg is ok to print it ?

@baxrok2.

2 жыл бұрын

Yes, thats a good choice.

That battery strap sucks cant get them tight enough

Where can I purchase the warthog chas

@CineMoto24

Жыл бұрын

Check the link in the description! Thank you!

@jimbest2448

Жыл бұрын

Ordered mine in black

Why does the roof say skp eng

@CineMoto24

2 жыл бұрын

Because that is the name of my etsy shop.

@InsanercYT

2 жыл бұрын

@@CineMoto24 that makes sense also u should try to put a traxxas trx4 winch servo on an scx24 im doing it right now

Will you sell me your Warthog?