Thank you for the simple and clean presentation. I appreciated the fact that you didn’t tell me all about yourself or show me how to take the deadbolt out of the box.

@door4942

3 жыл бұрын

You're welcome

Off to Home Depot I go to attempt to rekey our 2 deadbolts. This video was great and gave me the confidence to do it myself.

Phenomenal instruction and clear demonstration. You just gave me the confidence to re-key three of my deadbolts. Many thanks, and best regards.

Great informative presentation. You spoke in very easy to understand instructions. Thank you

Thank you for this detailed video. I was reluctant to try but your instructions gave me all the confidence I need to tackle this.

@door4942

3 жыл бұрын

Glad it was helpful!

Awesome video. Rekeyed all my locks in no time. Thanks!

@door4942

3 жыл бұрын

You're welcome!

Thanks for a great how to video on this and staying so focused on the task instead of getting off track

@door4942

2 жыл бұрын

No worries!

Awesome sauce! So good to see manufactures helping out in the DIY world!

@door4942

2 жыл бұрын

Our pleasure!

Great demonstration on how to perform this task with such clear tutorial. Very appreciated!

Excellent video! I've used my relay kit several times in the past with very frustrating results. I found this video this time around and it couldn't have been easier.

Great tutorial video on changing the deadbolt. Soooo much easier than doing door knobs and levers. I changed my deadbolt in about 15 min. Probably took this long because I kept pausing the video to perform that step instead of watching the entire video and going along at the same time. Thanks a bunch!

@door4942

2 жыл бұрын

Thanks for sharing your experience!

Wow you are a great teacher!

Wonderfully useful explanation. Thank you!

Excellent instruction. Thank you.

@door4942

3 жыл бұрын

You are welcome!

Thank you, you just answered all my questions.

Thank you for the quick and simple tutorial. Helped out a ton

@door4942

Жыл бұрын

You're welcome!

Very Clean Presentation. Thanks

Thank you very much for sharing your expertise.

Very informative...

Excellent Video!! Thanks so much for posting this!!

@door4942

3 жыл бұрын

Glad you enjoyed it!

Thanks, old man! 💪🏻👴🏻

@door4942

2 жыл бұрын

You bet!

Thank you!

Well done.

Thank you for this video, it is very well done. I just an Encode deadbolt for my front door, and a lever keyed entry, and all my other doors are just standard Schlage deadbolts and keyed entry knobs, and the keys all look like the same blanks, so if I'm following this correctly, with this kit, I should easily be able to key all of mine to one of my keys, correct? Seems that way.

God bless you for sharing! Nice video! Did the security pin come in place? I missed!

Awesome video! What's the part number for the solid brass 5-pin cylinder? I've never been a big fan of the zamac cylinders used in most B60 products.

hi so I have used this video to attempt to rekey locks about 6 times. 2 of those times I followed this video and jammed the cylinder. The other 4 I did not listen to the video at all key step and it made all the difference. The problem arises when I am sliding the cylinder back on to the housing. If you slide it above those mini half holes and then try to turn the key, the pins get stuck in the half hole and you’ve completely jammed your cylinder. Instead, I slid the cylinder on the other side, without the mini holes, then just manually turned them back to the proper full holes. Has anyone else run into this issue? Am I doing something wrong or is this video incorrect?

Your video was very informative logical clear and useful. Is it possible to replace the 5 pin tumbler with a 6 pin tumbler as there seems to be enough space. I have a schlage sense BE479 and after a master key change to six pins I want to be able to replace the 5 pin cylinder with a 6 pin cylinder. If possible is additional hardware needed or other customization?

@door4942

2 жыл бұрын

Simple answer is yes

Can the retaining pin be put in reverse? I have a lock that happened from the factory and it caused the key tumbler to retain the key and not allow the key to be removed. Thank goodness, my door was still under warranty and the repair took just a few minutes. The repairman knew exactly what the issue was when he came out and I showed him that the tumbler would partially come out just far enough to prevent the key from existing in the tumbler.

How do you remove the core without having the key to rotate the cylinder?

@devastatoraudio

3 ай бұрын

Has to be picked, I bought a cheap picking kit from ebay, still cheaper then paying a locksmith

Does Schlage offer an "extension collar" or escussion plate for a dead bolt installation where the hole in the door was cut out slightly too large ?

Great video for rekeying, you should show how to add anti bump pins, security pins and anti drill pins would be great.

@door4942

3 жыл бұрын

Great suggestions, noted

What a mission

anyway to do this with out the original key? I have 4 dead bolts on one of my buildings that I lost the keys too but i have another main Schlage key id like to rekey them too so all my locks will be one key. i love schlage and just figure i need to buy new ones.

A quick question I couldn’t find an answer to on the Schlage website. I am hoping to rekey a Schlage encode, smart deadbolt and a Schlage B 60N deadbolt to use this same key. Is the five pin cylinder on the Encode deadbolt the same or similar to the five pin cylinder used in the B60N deadbolt? Would they use the same pins if I bought a rekey kit online to rekey these cylinders? A vendor on eBay is telling me they use different pins, but he doesn’t sound that sure of himself. Many thanks for your help. Q2: Can a 6-pin key be used with a 5-pin lock?

What kind of lubricant if any would you recommend for a deadbolt ?

All the pins fell out thanks to my following the instructions on the back out the rekey kit. How do I replace them?

I have tried to find 4 sets of Schlage locks door & deadbolt all keyed the same as I lost my keys. I have one Schlage lock set on a door I recently replaced. So for the other 3 I’m going to get sets or individuals & rekey them. This looks like the cats meow.

What isn't shown are the springs and tops pins the follower keeps in place that line up over each pin chamber in the plug. If the follower is pulled out these parts will escape and will need to be replaced one at a time with tweezers. Do not let the follower come out without the plug to take it's place or you will be unhappy

Is there a way to recover the lock if you do not rekey it properly? The pins were flush and everything went back to get her now but now none of the keys work

@door4942

3 жыл бұрын

I would re-check that the proper pins were used.

How do I Get the removable cap on? Is there a specific technique?

Nice video. Question. If my kids lost the original keys how do I rekey to a new Schlage lock key? (The section in the video where you have to turn the cylinder to about 3 oclock position with the original key to take the cylinder out. The original pair of keys the kids lost. So I'm going to replace the other locks with new Schlage locks but would like to keep the original electronic key pad and rekey to the new locks. Thank you.

@pouncerminned863

2 жыл бұрын

use a shim

@chicagohavoc

Жыл бұрын

You have to pick it with a lock pick. Can be found on Amazon or ebay. I inherited 5 code locks with no keys. Took me 10 mins to pick but finally got it.

I did all the steps and had all flush pins, reinserted the plug but was unable to get the key out. What was I doing wrong? Are all the top pins suppose to be the same length? I wasn't the one that removed the pins and springs but trying to put it back together. The key was broken off on inside the plug.

@door4942

3 жыл бұрын

Top pins should be the same. Did you wiggle the key in a bit? Also make sure you picked the correct bottom pins for perfect shear line

Would the lock still work without the Retaining pin?

Can this method, or something similar, be used if you no longer have a key for the deadbolt?

@Taint-Bruiser

2 жыл бұрын

I don’t believe so. May need a locksmith for that one.

@door4942

2 жыл бұрын

Yes, once you take the cylinder apart you can pin it to a new key.

@Taint-Bruiser

2 жыл бұрын

But you can’t take the cylinder apart unless the key is in the unlocked position, correct? So you would need to lock pick the lock in order to get the cylinder apart. So may need a locksmith. I’m not the pro here though... but you may find it difficult to remove the cylinder with no key.

@nancyjeanne

2 жыл бұрын

thank you for your responses!

@pouncerminned863

2 жыл бұрын

@@Taint-Bruiser you can use a shim kzread.info/dash/bejne/k6ejlMd8ctK9oJM.html

Reassembling the nut with the tailpiece + c-washer is much more of a pain without the special wrench shown. The video shows removing the nut with the small screwdriver and also using the wrench, but only shows reassembly using the wrench. Given this is the hardest part of the whole process (IMHO), it would have been helpful to show that. Lacking the wrench, having three hands would doubtless require a lot less patience than one must normally expend to get the nut back on while depressing the pin and keeping the tailpiece from flopping around like it was specifically designed to make doing so difficult.

@door4942

3 жыл бұрын

Bart, good comments. We do recommend using the proper tools to complete these tasks.

@kimchee94112

2 жыл бұрын

Not that hard with a screwdriver. Put it in a bench vice if you needed an extra hand, not necessary actually.

If the key don't work or turn how can I make it to work so I can re key it

Is it possible to rekey a double key deadbolt?

I tried this using the same style lock and follower, but I could not get the housing past the threads onto the follower.

Where do you get a new key to rekey your locks to?

@mmc81821

Ай бұрын

I have the same question 😅

Had to skip to the end so I could finish rekeying a customers key I hate keying Schlage locks kwiset is way easier

What to do when you dont have the key !!

Everything fell out 😭

10 minutes of commercials. I figured it out myself before the commercials were fininshed.

Excellent and informative video. I did not understand how it would be possible to rekey a lock, but now I understand how it's done! Thank you.