Amazon UK Link to Scheppach DP55 710W Bench Drill: amzn.to/3vv6VJR * As an Amazon Associate I earn from qualifying purchases. Thank you.

I'm looking at this, so perfect timing.

@PhillWyattProjects

7 ай бұрын

Yea Karl it's alright I think. Better than I was expecting. It doesn't feel premium although it seems to do the job just fine and for the money it performs as expected I think. I'm not a fan of keyless chucks on drill presses so this one fits the bill for me.

@karlpopewoodcraft

7 ай бұрын

@PhillWyattProjects I use the scheppach thicknesser and that's been great so far. I've just seen this on offer for 138 pounds, What did you pay if you don't mind me asking?

@PhillWyattProjects

7 ай бұрын

@@karlpopewoodcraftYea Karl I got mine from Robert Dyas for £137.69. it's still at that price currently. Delivery was free too. 👍🏻

@karlpopewoodcraft

7 ай бұрын

@PhillWyattProjects I didn't expect you too miss out on a good offer mate 🤣

@PhillWyattProjects

7 ай бұрын

​@@karlpopewoodcraftI do like a deal 😆

Hi Phill, Great video on your new pillar drill plenty of power and well demonstrated and you made a drill bit rack, as always a good honest review and a great video Take care👍

@PhillWyattProjects

7 ай бұрын

Cheers Shaun 👍🏻 I had been meaning to make a rack for the bits glad it's all done now.

that is a nice thing for the drill bits

@PhillWyattProjects

7 ай бұрын

Thanks Owen it's all much more organised now which is good.

Does seem to be a good bit of kit, and you have done a really good review and demonstration 👍

@PhillWyattProjects

7 ай бұрын

Thanks mate 👍🏻

hi phill looks like a good tool

@PhillWyattProjects

7 ай бұрын

Yea I'm pleasantly surprised with it. Quite good I think.

Excelente vídeo! 👌🏻

@PhillWyattProjects

4 ай бұрын

Thanks! 👍

Knowing the distance between the shaft and the centre of the chuck would be helpful.

The DP60 has a huge feature over this, it has 2 gears. Unless you can get DP55 ridiculously cheap and need it only for very light drilling, I would (and did) absolutely get DP60 instead.

@Stu81

15 күн бұрын

The extra price isn't worth the lower rpm speed for wood working, still the same max rpm but unless you do a lot of metal work it's a pointless feature, it doesn't offer any more drilling capacity both are 280mm chuck to base.

@penttijakonen3817

15 күн бұрын

@@Stu81 If it's useless for you, okay. I completely disagree, unless the situation is what I described earlier.

@Stu81

15 күн бұрын

@@penttijakonen3817 out of interest what has 1st gear done for you that makes it so valuable?

Thanks Phill, interesting to see a more in depth review for this machine. I've seen mixed views on the drill especially regarding drilling metals and accuracy, but it looked fine in your review and it seems it should be OK for most DIY workshop use. TBH there is a similar drill from Bosch which is much more expensive and still has mixed reviews, I think a lot comes down to your expectations of a DIY machine !

@karlpopewoodcraft

7 ай бұрын

Hi Andy I suspect the drill bits people are using are influencing their opinion as well. I have a small silverline drill press very budget indeed but when I use famag drill bits it will cut through iron wood like butter. I think this scheppach drill look a good contender against the Bosch.

@PhillWyattProjects

7 ай бұрын

Hi Andy 👍🏻 yes and I think it also comes down to luck. I think I got a good one straight out of the box. I'm not always so lucky when buying a new tool. With this one they seem to have simplified it and revised issues that the earlier models had even though it is the cheapest one they do I think it's decent. I was looking at the Bosch model although it's almost double the price of this one so that put me off a bit.

@PhillWyattProjects

7 ай бұрын

​​​@@karlpopewoodcraftits a good point about the drill bits Karl. The quality varies a lot. Always worth experimenting with different brands.

@andyc972

7 ай бұрын

Thanks Karl, I appreciate the feedback !@@karlpopewoodcraft

@andyc972

7 ай бұрын

Yep, we all need a bit of luck !@@PhillWyattProjects

Merci pour ces explications que j'ai trouvé utile car je l'ai acheté y a quelques semaines. 👍🏼

@PhillWyattProjects

2 ай бұрын

Merci!

@900themarco

2 ай бұрын

Bonsoir @tantanflingueur9646. Qu'en pensez vous aujourd'hui après quelques semaines d'utilisation ?

Any chance this drill could make a ~50mm hole saw work on 18mm plywood? The equivalent Parkside drill failed miserably.

If you hold the end of the drill bit when mounted in the chuck and wobble it, is there much play?

@PhillWyattProjects

4 ай бұрын

No not on mine. It's good. I think I was lucky with mine.

Hi Phil thanks.what is the cost and where can I buy apart from Amazon

@PhillWyattProjects

7 ай бұрын

Hi, I bought mine from Robert Dyas for £137.69 on sale at the moment. You can also get it from Scheppach Direct which sells online and on eBay. Hope this helps 👍🏻

Habe mir die Bohrmaschine angeschafft und kann nur sagen, sehr enttäuschend. Nach noch nicht einmal 10 Bohrungen, gab die Maschine den Geist auf. Zuerst ruckliger Motorlauf, dann Stillstand. Auf dem Display konnte man alle möglichen Drehzahlen einstellen, aber die Maschine lief nicht mehr an. Weiteres Manko, Bohrer mit 1mm Durchmesser lassen sich nicht fest einspannen. Laser zum Markieren des Bohrloches, zeigt nicht die Mitte an, sondern 1cm daneben. Schwergängiges Heben und Senken der Maschine.

No square or round table to go up or down?? PASS.

@PhillWyattProjects

4 ай бұрын

It doesn't need one. The base is the table. The drill comes to the table.

Rpm ,revs per minutes not ,2850 minutes ,ehh