- There are 3 patterns of #SCG #Modeena: M1 / M2 / M3
- Accessories: SCG Wafer Head Screw 13 mm., SCG Modeena Clip, SCG Needle Point Screw 23 mm. and SCG Self Drilling Wing Screw 32 mm.
- Structure: To prepare frame spacing 50 cm. and check leveling
!!! How to install:
1) Marking line for installing clip above the floor around 3 cm.
2) Cutting the clip out 3 mm. for first line and install by using SCG Wafer Head Screw 13 mm. at line
3) Put SCG #Smartwood Modeena on the clip and check level
4) Fix Modeena by SCG Needle Point Screw 23 mm. and the clip and be careful at corner of Modeena when installing
5) Install next piece of Modeena by putting on clip
!!! Corner #Installation:
1) Cutting Modeena by 45 degree by electrical saw or circular saw
2) Put Modeena on clip and fix by SCG Needle Point Screw 23 mm. and the clip and be careful at corner of Modeena when installing
3) Install next piece of Modeena by putting on clip
!!! Jointing Installation:
1) When jointing 2 pieces of Modeena on above row, need to drill (pre-holes) and fix clip with SCG Needle Point Screw 23 mm.
2) Put Modeena on clip and leave a small gap
3) Install next piece of Modeena by putting on clip
Follow our other social media channels to know more #knowledge and #technical tip:
- Website : www.zmartbuild.com/
- Facebook : / zmartbuild
- Pinterest : / zmartbuild
- LinkedIn : / zmartbuild
- Twitter : / zmartbuild
- Instagram : / zmartbuild