Plaster fast and economically with KAPPA plastering machines and KAPPA SYSTEM
Ғылым және технология
www.kappamachines.com/
1200 sq ft of cement plaster in ONE day by 2 applicators !!! Amazing performance of KAPPA plastering machines and KAPPA SYSTEM.
Disclaimer: The video is not a tutorial and must not consider as a tutorial. In the video are presented only the basic steps of the spray plastering process which is only a suggestion. The clients before use any plastering methodology must examine it and arrange proper trials before the works execution. The clients must confirm that the followed plastering methodology is proper and that complies to their and/or their clients quality and productivity requirements and standards. For the jobs must be used well trained operators and applicators. The clients must arrange and based on their own calculations and estimations for the outcome of using a plastering machine at their site before the purchase of a plastering machine. The plastering methodology is a clear choice and responsibility of the client and our company has no liability for the outcome of the plastering works.
Пікірлер: 576
super good plastering
very good , please show the compressor and the pray mechanism and the source of cement mix
Good work, guys
wonderfull ! Best work, but also wonderfull music !
Good machine saves time
this TEHNIK must come from NASA!!! NICE!!!
These are the best products available in India. I strongly recommend it to try.
@KAPPA_PLASTERING_MACHINES
7 жыл бұрын
Thank you for your nice review!
@ratnashrivas6112
Ай бұрын
Price?@@KAPPA_PLASTERING_MACHINES
muy bien,,, primer paso de pegado de mezcla importante, y después (2do paso) dar nivel, esas reglas guías de nivel en pared y corte de mezcla son de aluminio, ? el compresor o equipo cuantas libra de presion (spi) o Bar es necesario? .. la empresa comercial (país de venta) que la vende?...saludos desde Panamá
Good idea 👍👌
Waoooo very nice work👏
Excellent
Seems like the metal screeds stay in the walls, right? So how does it just "Cover". I'd be concerned with cracking with AC/variations of temp and the mix of metal and concrete. The plaster cover is very thin over the meta. Cracks?
@XX-kf7mx
3 жыл бұрын
@25:40 it says in the video that the level strips were removed and the gap were filled with excess plaster
@huuamai8151
2 жыл бұрын
@@XX-kf7mx Wow, no way... You'd have to break up the concrete to take them out, and if all you do is fill it with concrete, for sure it's going to crack. Aside from that, if they take out the metals, then what is holding the concrete slab to the wall? I doubt a primer is a strong enough bond to join them.
@Summersault666
Жыл бұрын
@@huuamai8151 it will not break if you remove after a couple hours
Cool 👍🏼
Good job
Fantastic
nice newer system we used to have to run a 3"hose about a mile up scaffold from pump station talk about tiring 😝
Nice
Later , you remove the wall skeleton, or you leave them inside the plaster ?
Hi I am interesting about this machine .
fantastic work
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you sir!
@rajivpillai1876
3 жыл бұрын
Where is this place
l like it good technology
I wonder if they have perlite with fiber in it 🙂
Nice!
@wernerfreund4949
6 жыл бұрын
Kalla Narayana xx
@eswaraneswaran7410
6 жыл бұрын
👌👌👌👌👌👌👌
Buono il ripasso!!!
Wow very nice and easy.
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you.
@padmacr4521
6 жыл бұрын
Super
Super.
What a idea
Well done
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
Shall we remove the leveling strips?
الله ينور عليكم يا معلمين
@Arbago300
Жыл бұрын
you right!
What do you do with the leveling strips after plaster. Do you remove them and plaster the gap?
@unathisonakileiviwe1272
2 жыл бұрын
I think they stay inside
Can this be used for a stucco installation?
GOOD WORK AND FASTER
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
GUYS, YOU JUST CUT THE MAJOR PAIN IN ASS STEP WITH THIS TECHNIQUE REMOVING LEVEL STRIPS AND LEVEL THE PLASTER VERY SMART....
nice
Really nice kis prakar Banti hai mashin please
more to it than just using the you need a darby ,a slick stick,a hawk trowel 🤦♂️plus a scratch coat and brown coat as you see b4 they spray the top coat👍
Everything seemed to be great.. Only if you could tell us about sand proportion with cement.. Waiting...
Belo trabalho !!!!
@IndramayaParajuli
Жыл бұрын
🎉❤3 and 0
can u tell me this machine is available in hire basis we need home plastering work so we need hire basis
Do you have to level it. I love the ripple look?
@pcno2832
5 жыл бұрын
In some parts of the USA, people expect the walls to be textured, though not as rough as this stuff. It's a pain keeping them clean and dust free, though.
Is there any chance to get this in a rental for couple of days
Very nice
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you.
awesome
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
very nice
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
Good day. Are there any local dealer/distributor's of Kappa machine in Philippines? Appreciate your reply..
en general, las muescas se hacen en una pared lisa. o una proyección de cemento líquido con una capa fina y luego una capa de mortero 😏
Good information nice
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you.
Now go back and float it or texture it,and clean up tools and the pump their great for big jobs 👍
Good...verygood and and so fast.. i want yo know where to bay it.?
Super super very good
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
What material is the leveling strip.
Bravo.
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you sir.
Good idea but how to make spray machine
concrete class for your plastering??
What about those leveling strips used, don't you take them out?
simple the best
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
I think he needs to put a code over the framing on the edges on the seams up and down
its a good method its true,effective on a large work but its a bit messy(im soooooo jelous you,0 edges ,just a wall thats all )
What happened to the timber battens? If left inside one have differential expansion and hence cracking a long the batten line.
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Hello, they are aluminum profile strips and they removed after the initial leveling. The applicator fills the gaps with the excess material.
@aby0ni
5 жыл бұрын
I think the spacing should be increased to about 3 meters, and the screed box should be long enough to level the plaster in between guided by the battens. Or you can use the battens as formwork to plaster perfectly level, wait for the plaster to cure, remove the battens and then use the small strips pf cured plaster as guides themselves. What do you think?
@akilaiocamacho5464
2 жыл бұрын
@@KAPPA_PLASTERING_MACHINES can you make a video with the removal process?
Why were guide rails not removed and filled? Isn't this a problem for the plaster with cracks? And why, since those rails are not removed aren't they with an edge facing out and are flat?
@KAPPA_PLASTERING_MACHINES
7 жыл бұрын
Μάριος Λοϊζίδης Hello, good point. Definitely the rails removed and all gaps filled. It is easy and not considered as a step hence we didnt show it to not prolong the video duration.
Very good. How much is the machine?
Is it available in guwahati, Assam? . I m planning to build a house. Please provide information as soon as possible.
Superb
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
👌👌👌👌👌👌👌👌
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you.
Can you do plastering service in chennai how much cost per sqft
It seems like that guy could spray forever , how big is the tank?
@heavydutypainting9225
6 жыл бұрын
Skip Kot There is at least one guy feeding the machine. At least one helper with the two plasterers. Minimum of 4 guys.
@janmejaysingh3968
3 жыл бұрын
In
Can anyone tell me as to where n how i can buy this product?
Very good and faster
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
Need under 2 Lacks plastering machine, will available ?
This is uanderfool
Good technic
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you!
Or is this product available for rent to test it.
Super
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you.
how it is work this ???
I want the spray machine how much it costs and how can i access The metal strips are remain there what are you going to do with??
afterwards people don't know why the reboque falls off, yes of course, the first applied is totally "burned" ...
It looks good but will affect drilling of holes especially when you have levellers installed in the wall
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Hello, no holes at all, the levelers are removed and not installed in the wall.
@tomkamea6800
6 жыл бұрын
KAPPA Plastering Machines .thanks for the feedback
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Welcome.
@c6_si
2 жыл бұрын
@@KAPPA_PLASTERING_MACHINES I want to buy one for Iraq.
güzel Makina fiyatı ne kadar
Iam interested in buying wheater you provide training to Mason
what is the cost of kappa 3000 model machine
Great, looks like gunite, thanks.
@KAPPA_PLASTERING_MACHINES
6 жыл бұрын
Thank you.
@sureshacit0086
3 жыл бұрын
@@KAPPA_PLASTERING_MACHINES send me your number
@KAPPA_PLASTERING_MACHINES
3 жыл бұрын
@@sureshacit0086 Hello, you can find details about the machines and contacts here: www.kappamachines.com
Cam this be used to apply plaster straight onto fiberglass or steel lath?
@Arbago300
Жыл бұрын
never apply on steel, it will crack.
Dear Kappa i want this one, in gujrat. ASAP
Consider the damp bridged
May i get this KAPPA Plastering Machines in Pakistan??and in how many rupees??
Malaysia mana Ade jual mesin macam tu
Ceilings?
What happens to the level strips after plastering?
@georgelsla5041
4 жыл бұрын
They stay input i guess
@deanoh6414
3 жыл бұрын
@@georgelsla5041 The video says "After removing levelling strips...." shame that don't show that step. Must be a ball ache I guess.
You leave the metal in the wall? I would think you use it to screed, then remove. Don't you see the differene in Materials if you paint the wall?
@abdulmuis8773
2 жыл бұрын
Hci
@ganeshkhandare4337
Жыл бұрын
Sir mujhe ye masen Leni hai uski kimat Kya hogi plg
Where to bye this Plaster machine?
How much... Kya rate h is machine ka plz bataye... I'm interested in this product
Can machine spray with sand and cement or only cement?
Is this machine sold in Chennai . Want to see the experience of your existing customer in Chennai
@bhikho123
6 жыл бұрын
Kalyan Kumar gogineni please contact us on 8511115214, and we can provide you all necessary details to witness the live demo/ work at Chennai site.
@sabirali8870
2 жыл бұрын
i need this
nice music
What is ratio ? And water
Hello Thank you for the video I like to ask about strip, are we should removed after completing the plaster? Thank
@KAPPA_PLASTERING_MACHINES
7 жыл бұрын
Yes, all strips removed and used again.
@bawabatbahla7823
7 жыл бұрын
KAPPA Plastering Machines thanks
@KAPPA_PLASTERING_MACHINES
7 жыл бұрын
Welcome.
from where the sprayer taking the mixture, the container not shown, it will give a complete picture.
@KAPPA_PLASTERING_MACHINES
4 жыл бұрын
Hello, in this video we focus on the application since the machine function and quality is granted. You can see the machines here: www.kappamachines.com
How can I order this machine & what is the price of this machine in India .
I usually use 2L6 but I want another one with a higher flow.
@AK4TT
3 жыл бұрын
What part of the world are you? I'm interested in this equipment
@franciscocosta919
3 жыл бұрын
@@AK4TT I'm in the state of Espirito Santo, Brazil. I am interested in buying a stator and rotor for my plastering machines. Where are you?
@murtazakazmi4628
Жыл бұрын
@@AK4TT how many rotor stators do you want? Give me your whatsapp I will give selection book of rotor stators