just a one log snack video , hope you enjoy! We have a online store at markgalicicchannel.com/
Жүктеу.....
Пікірлер: 136
@user-iv2uc8nf8y3 күн бұрын
kids say this video was a bore not worth watching
@VorlonFrog2 күн бұрын
Loving that beautiful straight oak grain. Thanks for sharing, Mark, Eddie, ZZ, and everyone else!!
@ronthacker2113 күн бұрын
Nothing like the grain of an Oak... except for Cherry... and Hickory... and Walnut... and Maple... and......................LOL
@larrybauman7430
3 күн бұрын
American elm, eastern cedar.
@markgalicic7788
3 күн бұрын
I like it Ron lol!
@Chr.U.Cas2216
2 күн бұрын
👍👌👏 I totally agree! 😁😁😁 Best regards, luck and health in particular.
@garyschacht50323 күн бұрын
I watch so many videos on all kinds of stuff but when I just want to relax and honestly enjoy one, I always find myself going back to one of yours. Just a great bunch of guys loving what they do and doing it well, no BS involved! Keep up the great work and videos! Patiently waiting for another Axiom router video, lol!
@lewiemcneely91432 күн бұрын
SWEET log but a little short. Happy Weekend and God Bless!
@gipsysmith33833 күн бұрын
That would make a great table. It looks lovely
@markgalicic7788
3 күн бұрын
yes for sure.
@Bob619443 күн бұрын
I can’t believe that my birthday log was short. But at 80 I’m a little shorter myself.😊. Nice cabinet wood in there.
@markgalicic7788
3 күн бұрын
thanks Bob , Happy Birthday!
@Chr.U.Cas22162 күн бұрын
👍👌👏 2) That's some really nice wood! Best regards, luck and especially health to all of you.
@davidhuffine50842 күн бұрын
Just you and eddie . Nice 8ft log . Lumber looked good . Seeya
@fricknjeep3 күн бұрын
hi there nice log . best to all john
@markgalicic7788
3 күн бұрын
thanks John.
@miker6483 күн бұрын
Mark, curious how you and Eddie crossed paths and started a sawmill and sawing wood?
@markgalicic7788
3 күн бұрын
we want to make a video about that.
@paulsimmons95793 күн бұрын
Good looking boards, men.
@cyndikarp33683 күн бұрын
Scarlet Oak is so pretty. I love it.
@larrybauman74303 күн бұрын
Saw logs you always cut 4 inches extra, like 8'4".
@markgalicic7788
3 күн бұрын
yes we do know that but the tree people don't lol.
@marcchatterson-xq7qt
3 күн бұрын
@@larrybauman7430 any amount of trim is good even an inch as long as both ends are cut square Would be great if every log had at least 4 inches cuz chainsaws don’t always cut straight It’s sad to have to trim it back to the next foot cuz there wasn’t any trim left on the log
@lambeausouth13 күн бұрын
Watching your log snack video and having a snack 😀
@byron71653 күн бұрын
"Get off my lawn!"
@williamellis89933 күн бұрын
Nice boards, Mark. Was the log pinching behind the blade at the beginning? Bill
@mckinleygoetz98553 күн бұрын
Thank you so much for sharing your knowledge and experience with all of us.
@markgalicic7788
3 күн бұрын
thanks McKinley , glad you liked it.
@DavidPadusnak3 күн бұрын
amazingly got some nice clear boards out of that log. Shorts are fine , booms are good , and any log that gets on your deck is a victim!
@markgalicic7788
3 күн бұрын
thanks David.
@karencary33123 күн бұрын
Thanks for the video!!! ❤❤❤❤
@markgalicic7788
3 күн бұрын
thanks Karen.
@markchidester92333 күн бұрын
That’s some nice looking lumber right there
@markgalicic7788
3 күн бұрын
it was very nice but short.
@PitViper3292 күн бұрын
(In the style of Law and Order) At the Bus Motor Mill, logs are not very cooperative and need to be dealt with. The specialized mechanism answering this call is Chewy These are his stories. [DUH DUH!!]
@TheMarkBell3 күн бұрын
I like how the carriage has ‘Dang’ printed on it, LOL 😂
@markgalicic7788
3 күн бұрын
that's funny lol!
@frickcirclesaw3 күн бұрын
Hope the lumber can get used. Nice looking boards. What changes would you make?
@garyblevins35323 күн бұрын
Somebody needs to teach them youngins how to read a tape measure and tell em an 8' log should be atleast 8'3" in length if not 8'4"!
@markgalicic7788
3 күн бұрын
yes they do Gary.
@phildo39645
3 күн бұрын
We always used to cut em 8’6”,10’6” 12’6” etc
@simsapot3 күн бұрын
I’m sure I’m wrong or confused, a couple of videos back, you guys were working to replace or improve the conveyor belt ??? Enjoying your expert milling
@markgalicic7788
3 күн бұрын
yes that was a few months ago.
@randydobson18633 күн бұрын
Hi Mark & Eddies & it's is Randy and i like yours video is Cool & Thanks Mark & Eddies & Friends Randy
@markgalicic7788
3 күн бұрын
thanks Randy.
@daviddiehl-gy2sq3 күн бұрын
Surprised, nobody has designed hydrolicly movable head blocks.
@marcchatterson-xq7qt3 күн бұрын
Beautiful oak lumber today. Fairly fresh log it’s nice sawing that stuff The other day I cut an invasive tree it was called a tree of heaven. Beautiful wood. Almost like elm Took me some research to figure out what it was it got put in our poplar pile cuz the bark was kind of similar
@markgalicic7788
3 күн бұрын
thanks Marc.
@robertgreen86953 күн бұрын
May have been a short shit but it gave you some pretty nice looking boards, so whatever the end use they should work just fine. As usual it is nice to see you and Eddie doing what you like to do amid the man glitter or summer snow as I like to call it and to hear the band sing.
@markgalicic7788
3 күн бұрын
thanks Robert.
@bradanderson1627Күн бұрын
They say they can read a tree but NOT A tape measure!
@reeley2 күн бұрын
no closed caption / subtitles, darn it, but still a lovely watch, thank you
@Sailor376also3 күн бұрын
Pretty colour, pretty grain.
@markgalicic7788
3 күн бұрын
yes nice oak.
@user-lf1bt6qm3h2 күн бұрын
Thats goergeus Mark, thnx for the video bro
@melshea22763 күн бұрын
Happy Sunday Eve 😊
@markgalicic7788
3 күн бұрын
thank you.
@cowshottv58673 күн бұрын
Nice work,men, i really enjoy watching your channel
@markgalicic7788
3 күн бұрын
thank you.
@davidhensley763 күн бұрын
No actual children were insulted in the making of this video. 😊
@williamlee80983 күн бұрын
Mark how long is it from time a log is cutt till it’s sawn at the mill just curious
@richardbritton52803 күн бұрын
Nice sawing beautiful wood ty guys 👴🏆🏆🙏🏿🙏🏿
@gerardomanuelortiztellado14603 күн бұрын
GOD BLESS YOU HAPPY WEEKEND 🙏
@markgalicic7788
3 күн бұрын
thanks.
@alexkirkles50663 күн бұрын
Nine o’clock in the morning and I’m back online short logs makes life easier nice lumber coming off the mill, my internet went down yesterday before I went to the airport , a packing case from America cargo handlers were ok then the customs I had all the paperwork including customs clearance, but this little hitler decided he wanted to inspect it he didn’t have the tools to open it after an hour I got his supervisor I explained it was cleared customs only needed there stamp to say it was leaving the air port , fifteen twenty minutes in cargo handling and two hours in customs to get paperwork stamped,, it’s X-ray in America and X-ray in uk so they know what’s in the case don’t know what they call these people in America but there jobs worth hear , anyway you guys have a nice day
@bryanbest51133 күн бұрын
Any thought of restarting the kiln project?
@markgalicic7788
3 күн бұрын
yes but not here.
@marklapierre56293 күн бұрын
A short little log is appropriate for a short little video. ;-)
@patrickehaynes3 күн бұрын
Still HOT 🔥 here in louisiana, but still watching the Sawdust fly.
@markgalicic7788
3 күн бұрын
thanks Patrick , we are in the low 80s.
@barrylangstaff57272 күн бұрын
Good video 🙏👍🏻
@cjmaslowski11123 күн бұрын
Thanks for the video great job who ever cuts the log they should know what the lengths are and add 4 to 6 inches
@markgalicic7788
3 күн бұрын
yes they should lol.
@barryhoneycutt38943 күн бұрын
That was some excellent Oak Lumber from that log - some clear purdy :) when a man cannot measure right to cut a log, maybe he should not be using sharp tools LOL just sayin
@blnfuse
3 күн бұрын
so than should we just make it all campfire wood ?
@barryhoneycutt3894
3 күн бұрын
@@blnfuse No, not all firewood :) Mark said the tree cutters cut the wrong length he needed, it still mad good lumber just short. Is my take.. :)
@davidmackenzie54033 күн бұрын
Nice oak lumber furniture grade 👍👍👍👍☕️☕️☕️☕️☕️
@markgalicic7788
3 күн бұрын
thanks , very nice oak.
@sharonromer66063 күн бұрын
I agree with you 👍
@markgalicic7788
3 күн бұрын
thanks Sharon.
@HWPcville3 күн бұрын
Can you elaborate on the yellow dial that moves with the log sled? I would assume it's use is to determine what thickness you are sawing but how do you read it? Is it the total inches from the back of the sled to the blade. If you are making a 2x4 is it as simple as advancing from a given number to 2 numbers below? Do you have a switch or lock that is preset that allows you to so quickly to advance the log toward the blade for repeated cuts? If you have a video where this topic is covered, I would appreciate the video #. Thanks!
@marcchatterson-xq7qt
3 күн бұрын
All carriages have presets so each pc cut can be the exact same thickness some have more presets than others or u can just like you said advance it 2 inches But very hard to do that twice the exact same. One could be a 16th or 1/8. Less or more than the piece before
@robertwazniak9495
3 күн бұрын
The dial tells you what you have left after your board and sawkerf come off. It really is only a good guess until you have a flat back on the cant. Yes, he has presets (called setworks) but he adjusts them for the thickness he wants. Some are set to the common thickness (1”, 5/4, 2” ) and stay that way but a couple he sets for the order (like 1/2 inch)
@deksper
3 күн бұрын
Mark also uses the dial to determine his selection for his LOTTO DRAW. :)
@markgalicic7788
3 күн бұрын
@@deksper I like that one lol!
@robertwazniak9495
3 күн бұрын
@@deksper that explains why he is still working for a living…
@MAGAman-uy7wh3 күн бұрын
Did that log come from a regular supplier? Too bad the children can't measure.
@Keepithonest73 күн бұрын
Mark, did you have to adjust the laser because of the last wind storm? You mentioned it in a previous video
@markgalicic7788
3 күн бұрын
yes it's all good now.
@Keepithonest7
2 күн бұрын
@@markgalicic7788 excellent
@marcdh113 күн бұрын
How many inches is 5 quarter or 4 quarter?
@mlbabineaux
3 күн бұрын
4 quarter is 1-1/8 iinch
@braddobson20603 күн бұрын
That's a metric 8 ft
@markgalicic7788
3 күн бұрын
I like it lol!
@WoodworkingTop5353 күн бұрын
thanks you for sharing
@markgalicic7788
3 күн бұрын
your welcome.
@michaelhall58912 күн бұрын
Short logs short videos 😅
@matthewb82293 күн бұрын
If you're paying for an 8' log, and not getting an 8' log, that needs to be addressed.
@Ronald-hx6zn3 күн бұрын
Very nice grain
@markgalicic7788
3 күн бұрын
thanks Ronald.
@maynardreed40363 күн бұрын
I used cut logs 8foot 6
@markgalicic7788
3 күн бұрын
I like that!
@davidcooney97313 күн бұрын
Hi Mark. On your last video, you were wearing an Andruw's Lumber T-Shirt. I was Green with Envy !!Where can I buy them ??
@markgalicic7788
3 күн бұрын
go over to his channel.
@davidandrzejewski91273 күн бұрын
Why do you cut those logs.
@markgalicic7788
3 күн бұрын
because we can lol.
@remmiemax36243 күн бұрын
Mark, buy the Loggers a tape measure and show them how to use it...🙄🙄😉😉Good thing is you faced stupidity and got some good lumber out if it 😎😎👌👌
@anthonyhengst29083 күн бұрын
Grandpa wouldn't put up with that. If logs came short he made the cutters take them away and he wasn't always so nice about it. He'd rather have logs an inch or two too long. That being said, this was a pretty nice log some pretty nice lumber if only it was the proper length. Yup Grandpa was agreeing that " take the worst, saw that first" every time.
@bradwbangerter863
3 күн бұрын
My dad wouldn't put up with it at all .
@markgalicic7788
3 күн бұрын
yes Grandpa is right , Hi grandpa!
@butter2622 күн бұрын
Good morning
@lawrencetirrell84142 күн бұрын
Hi Mark. " They" didn't measure right? Or. "They" didn't care? Or. Both? I hope the customer didn't mind thier length? Well. Beautiful oak boards Thanks Mark. Say Hi to Ed. 🥰😊😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻
@LindsayWilson-vj1wc3 күн бұрын
I'm sure you have cause to complain but I had to laugh because my old boss in a metal work shop checked somethings I was cutting and was unhappy till I showed him his tape was wrong, with a steel ruler.
@richardwhite37113 күн бұрын
@ 1:45 are the Gnome Bros. on strike ? they seem to have let their area get awful trashy. Not like then to neglect the clean up for safety's sake in their personal space as it is
@gerardomanuelortiztellado14603 күн бұрын
GREETINGS AND BLESSINGS BIG HUG FROM CHICAGO IL 🌪️🌪️🌪️🌪️🌪️
@markgalicic7788
3 күн бұрын
Greetings Gerardo.
@dogit18403 күн бұрын
💥💥🛠️💥🛠️🍻🍔
@alanm34383 күн бұрын
If you did not like the length, you did not have to buy it. Nice boards! Good to see you.
@markgalicic7788
3 күн бұрын
thanks Alan , we didn't buy it.
@rockykaiser72443 күн бұрын
You need to dust off your gnomes. 😅
@deksper
3 күн бұрын
😂
@markgalicic7788
3 күн бұрын
they do need a bath lol!
@TheVideoSteve3 күн бұрын
The 'Bearded Munchkins' are still watching.... (look to left side of screen) ......
@markgalicic7788
3 күн бұрын
yes sir lol.
@genepage34053 күн бұрын
I think you released this video before.
@KennethPowell-kx3jt
3 күн бұрын
I agree
@markgalicic7788
3 күн бұрын
no sir.
@KennethPowell-kx3jt
3 күн бұрын
I apologize, ran my mouth before watching the entire video. 🥴
@MarvUSA3 күн бұрын
I hope you don't have to pay for those "shorts".
@markgalicic7788
3 күн бұрын
not much.
@charlesmiles91153 күн бұрын
😛😛😛😛😛😛❤❤❤❤👍👍👍👍👍👍👍
@jamesochesky4203 күн бұрын
You are slacking again.Mark only 2 videos this week.Come on !
@ChristinaCalhoun
3 күн бұрын
There was 3 videos posted this week #576, #577 our Friday eve video and this snack video #578
Пікірлер: 136
kids say this video was a bore not worth watching
Loving that beautiful straight oak grain. Thanks for sharing, Mark, Eddie, ZZ, and everyone else!!
Nothing like the grain of an Oak... except for Cherry... and Hickory... and Walnut... and Maple... and......................LOL
@larrybauman7430
3 күн бұрын
American elm, eastern cedar.
@markgalicic7788
3 күн бұрын
I like it Ron lol!
@Chr.U.Cas2216
2 күн бұрын
👍👌👏 I totally agree! 😁😁😁 Best regards, luck and health in particular.
I watch so many videos on all kinds of stuff but when I just want to relax and honestly enjoy one, I always find myself going back to one of yours. Just a great bunch of guys loving what they do and doing it well, no BS involved! Keep up the great work and videos! Patiently waiting for another Axiom router video, lol!
SWEET log but a little short. Happy Weekend and God Bless!
That would make a great table. It looks lovely
@markgalicic7788
3 күн бұрын
yes for sure.
I can’t believe that my birthday log was short. But at 80 I’m a little shorter myself.😊. Nice cabinet wood in there.
@markgalicic7788
3 күн бұрын
thanks Bob , Happy Birthday!
👍👌👏 2) That's some really nice wood! Best regards, luck and especially health to all of you.
Just you and eddie . Nice 8ft log . Lumber looked good . Seeya
hi there nice log . best to all john
@markgalicic7788
3 күн бұрын
thanks John.
Mark, curious how you and Eddie crossed paths and started a sawmill and sawing wood?
@markgalicic7788
3 күн бұрын
we want to make a video about that.
Good looking boards, men.
Scarlet Oak is so pretty. I love it.
Saw logs you always cut 4 inches extra, like 8'4".
@markgalicic7788
3 күн бұрын
yes we do know that but the tree people don't lol.
@marcchatterson-xq7qt
3 күн бұрын
@@larrybauman7430 any amount of trim is good even an inch as long as both ends are cut square Would be great if every log had at least 4 inches cuz chainsaws don’t always cut straight It’s sad to have to trim it back to the next foot cuz there wasn’t any trim left on the log
Watching your log snack video and having a snack 😀
"Get off my lawn!"
Nice boards, Mark. Was the log pinching behind the blade at the beginning? Bill
Thank you so much for sharing your knowledge and experience with all of us.
@markgalicic7788
3 күн бұрын
thanks McKinley , glad you liked it.
amazingly got some nice clear boards out of that log. Shorts are fine , booms are good , and any log that gets on your deck is a victim!
@markgalicic7788
3 күн бұрын
thanks David.
Thanks for the video!!! ❤❤❤❤
@markgalicic7788
3 күн бұрын
thanks Karen.
That’s some nice looking lumber right there
@markgalicic7788
3 күн бұрын
it was very nice but short.
(In the style of Law and Order) At the Bus Motor Mill, logs are not very cooperative and need to be dealt with. The specialized mechanism answering this call is Chewy These are his stories. [DUH DUH!!]
I like how the carriage has ‘Dang’ printed on it, LOL 😂
@markgalicic7788
3 күн бұрын
that's funny lol!
Hope the lumber can get used. Nice looking boards. What changes would you make?
Somebody needs to teach them youngins how to read a tape measure and tell em an 8' log should be atleast 8'3" in length if not 8'4"!
@markgalicic7788
3 күн бұрын
yes they do Gary.
@phildo39645
3 күн бұрын
We always used to cut em 8’6”,10’6” 12’6” etc
I’m sure I’m wrong or confused, a couple of videos back, you guys were working to replace or improve the conveyor belt ??? Enjoying your expert milling
@markgalicic7788
3 күн бұрын
yes that was a few months ago.
Hi Mark & Eddies & it's is Randy and i like yours video is Cool & Thanks Mark & Eddies & Friends Randy
@markgalicic7788
3 күн бұрын
thanks Randy.
Surprised, nobody has designed hydrolicly movable head blocks.
Beautiful oak lumber today. Fairly fresh log it’s nice sawing that stuff The other day I cut an invasive tree it was called a tree of heaven. Beautiful wood. Almost like elm Took me some research to figure out what it was it got put in our poplar pile cuz the bark was kind of similar
@markgalicic7788
3 күн бұрын
thanks Marc.
May have been a short shit but it gave you some pretty nice looking boards, so whatever the end use they should work just fine. As usual it is nice to see you and Eddie doing what you like to do amid the man glitter or summer snow as I like to call it and to hear the band sing.
@markgalicic7788
3 күн бұрын
thanks Robert.
They say they can read a tree but NOT A tape measure!
no closed caption / subtitles, darn it, but still a lovely watch, thank you
Pretty colour, pretty grain.
@markgalicic7788
3 күн бұрын
yes nice oak.
Thats goergeus Mark, thnx for the video bro
Happy Sunday Eve 😊
@markgalicic7788
3 күн бұрын
thank you.
Nice work,men, i really enjoy watching your channel
@markgalicic7788
3 күн бұрын
thank you.
No actual children were insulted in the making of this video. 😊
Mark how long is it from time a log is cutt till it’s sawn at the mill just curious
Nice sawing beautiful wood ty guys 👴🏆🏆🙏🏿🙏🏿
GOD BLESS YOU HAPPY WEEKEND 🙏
@markgalicic7788
3 күн бұрын
thanks.
Nine o’clock in the morning and I’m back online short logs makes life easier nice lumber coming off the mill, my internet went down yesterday before I went to the airport , a packing case from America cargo handlers were ok then the customs I had all the paperwork including customs clearance, but this little hitler decided he wanted to inspect it he didn’t have the tools to open it after an hour I got his supervisor I explained it was cleared customs only needed there stamp to say it was leaving the air port , fifteen twenty minutes in cargo handling and two hours in customs to get paperwork stamped,, it’s X-ray in America and X-ray in uk so they know what’s in the case don’t know what they call these people in America but there jobs worth hear , anyway you guys have a nice day
Any thought of restarting the kiln project?
@markgalicic7788
3 күн бұрын
yes but not here.
A short little log is appropriate for a short little video. ;-)
Still HOT 🔥 here in louisiana, but still watching the Sawdust fly.
@markgalicic7788
3 күн бұрын
thanks Patrick , we are in the low 80s.
Good video 🙏👍🏻
Thanks for the video great job who ever cuts the log they should know what the lengths are and add 4 to 6 inches
@markgalicic7788
3 күн бұрын
yes they should lol.
That was some excellent Oak Lumber from that log - some clear purdy :) when a man cannot measure right to cut a log, maybe he should not be using sharp tools LOL just sayin
@blnfuse
3 күн бұрын
so than should we just make it all campfire wood ?
@barryhoneycutt3894
3 күн бұрын
@@blnfuse No, not all firewood :) Mark said the tree cutters cut the wrong length he needed, it still mad good lumber just short. Is my take.. :)
Nice oak lumber furniture grade 👍👍👍👍☕️☕️☕️☕️☕️
@markgalicic7788
3 күн бұрын
thanks , very nice oak.
I agree with you 👍
@markgalicic7788
3 күн бұрын
thanks Sharon.
Can you elaborate on the yellow dial that moves with the log sled? I would assume it's use is to determine what thickness you are sawing but how do you read it? Is it the total inches from the back of the sled to the blade. If you are making a 2x4 is it as simple as advancing from a given number to 2 numbers below? Do you have a switch or lock that is preset that allows you to so quickly to advance the log toward the blade for repeated cuts? If you have a video where this topic is covered, I would appreciate the video #. Thanks!
@marcchatterson-xq7qt
3 күн бұрын
All carriages have presets so each pc cut can be the exact same thickness some have more presets than others or u can just like you said advance it 2 inches But very hard to do that twice the exact same. One could be a 16th or 1/8. Less or more than the piece before
@robertwazniak9495
3 күн бұрын
The dial tells you what you have left after your board and sawkerf come off. It really is only a good guess until you have a flat back on the cant. Yes, he has presets (called setworks) but he adjusts them for the thickness he wants. Some are set to the common thickness (1”, 5/4, 2” ) and stay that way but a couple he sets for the order (like 1/2 inch)
@deksper
3 күн бұрын
Mark also uses the dial to determine his selection for his LOTTO DRAW. :)
@markgalicic7788
3 күн бұрын
@@deksper I like that one lol!
@robertwazniak9495
3 күн бұрын
@@deksper that explains why he is still working for a living…
Did that log come from a regular supplier? Too bad the children can't measure.
Mark, did you have to adjust the laser because of the last wind storm? You mentioned it in a previous video
@markgalicic7788
3 күн бұрын
yes it's all good now.
@Keepithonest7
2 күн бұрын
@@markgalicic7788 excellent
How many inches is 5 quarter or 4 quarter?
@mlbabineaux
3 күн бұрын
4 quarter is 1-1/8 iinch
That's a metric 8 ft
@markgalicic7788
3 күн бұрын
I like it lol!
thanks you for sharing
@markgalicic7788
3 күн бұрын
your welcome.
Short logs short videos 😅
If you're paying for an 8' log, and not getting an 8' log, that needs to be addressed.
Very nice grain
@markgalicic7788
3 күн бұрын
thanks Ronald.
I used cut logs 8foot 6
@markgalicic7788
3 күн бұрын
I like that!
Hi Mark. On your last video, you were wearing an Andruw's Lumber T-Shirt. I was Green with Envy !!Where can I buy them ??
@markgalicic7788
3 күн бұрын
go over to his channel.
Why do you cut those logs.
@markgalicic7788
3 күн бұрын
because we can lol.
Mark, buy the Loggers a tape measure and show them how to use it...🙄🙄😉😉Good thing is you faced stupidity and got some good lumber out if it 😎😎👌👌
Grandpa wouldn't put up with that. If logs came short he made the cutters take them away and he wasn't always so nice about it. He'd rather have logs an inch or two too long. That being said, this was a pretty nice log some pretty nice lumber if only it was the proper length. Yup Grandpa was agreeing that " take the worst, saw that first" every time.
@bradwbangerter863
3 күн бұрын
My dad wouldn't put up with it at all .
@markgalicic7788
3 күн бұрын
yes Grandpa is right , Hi grandpa!
Good morning
Hi Mark. " They" didn't measure right? Or. "They" didn't care? Or. Both? I hope the customer didn't mind thier length? Well. Beautiful oak boards Thanks Mark. Say Hi to Ed. 🥰😊😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻
I'm sure you have cause to complain but I had to laugh because my old boss in a metal work shop checked somethings I was cutting and was unhappy till I showed him his tape was wrong, with a steel ruler.
@ 1:45 are the Gnome Bros. on strike ? they seem to have let their area get awful trashy. Not like then to neglect the clean up for safety's sake in their personal space as it is
GREETINGS AND BLESSINGS BIG HUG FROM CHICAGO IL 🌪️🌪️🌪️🌪️🌪️
@markgalicic7788
3 күн бұрын
Greetings Gerardo.
💥💥🛠️💥🛠️🍻🍔
If you did not like the length, you did not have to buy it. Nice boards! Good to see you.
@markgalicic7788
3 күн бұрын
thanks Alan , we didn't buy it.
You need to dust off your gnomes. 😅
@deksper
3 күн бұрын
😂
@markgalicic7788
3 күн бұрын
they do need a bath lol!
The 'Bearded Munchkins' are still watching.... (look to left side of screen) ......
@markgalicic7788
3 күн бұрын
yes sir lol.
I think you released this video before.
@KennethPowell-kx3jt
3 күн бұрын
I agree
@markgalicic7788
3 күн бұрын
no sir.
@KennethPowell-kx3jt
3 күн бұрын
I apologize, ran my mouth before watching the entire video. 🥴
I hope you don't have to pay for those "shorts".
@markgalicic7788
3 күн бұрын
not much.
😛😛😛😛😛😛❤❤❤❤👍👍👍👍👍👍👍
You are slacking again.Mark only 2 videos this week.Come on !
@ChristinaCalhoun
3 күн бұрын
There was 3 videos posted this week #576, #577 our Friday eve video and this snack video #578
@markgalicic7788
3 күн бұрын
@@ChristinaCalhoun thank you Christina.