Nice job Tinker So many things are getting done in a time like this its nice to live with fields around us Take Care
@tinkertime7165
4 жыл бұрын
littlejoey, thanks. Yeah, I am grateful for all the projects I can get onto. I expect some arn’t as lucky.
@jamesward57212 жыл бұрын
If you look at my only vid - it's also a saw - I chucked on a tilting table mechanism that does away with 90% of the sketchiness of using a big circular saw - it keeps you well away from the blade & also makes cutting pretty effortless as the tables spring assisted. But mainly, it keeps you out of harms way. :-)
@steveroche25243 жыл бұрын
This Is the kit I want if only i had the ingenuity to build it lol in all honesty the splitter and saw are a credit to you
@tinkertime7165
3 жыл бұрын
Thank you Steve, I have a good neighbour who eggs me on to do stuff like this! We are making a bandsaw mill right now!
@broughlands39994 жыл бұрын
Good job fella great stuff.......
@tinkertime7165
4 жыл бұрын
John Brough, thank you!
@steveroche25243 жыл бұрын
Cant wait to see the band saw mill I dont know if you subscribe to kris harbour natural building but hes just built a stunner of a portable mill
@tinkertime7165
2 жыл бұрын
I will have to take a look. In fact I think I have actually seen his.
@nathanjp964 жыл бұрын
What would be really nice there is a switch cut into the deck of the saw so when you push a log toward the blade, the throttle increases 🤔
@tinkertime7165
4 жыл бұрын
Yes, it can go on and on and on... down the rabbit hole! The knee throttle is really working well though. There are large pieces where you really need two hands and the ability to increase the power during a cut, if things start to go pear shaped half way through the cut if you release the throttle, the drive disengages, blade stops and the engine returns to idle. Ask how I know the value of this!
@davidhayward52074 жыл бұрын
Well sorted bit of kit. A68 and A55 on the belt guard - any relevance..? I also noticed the engine rocking gently under load independently of the bench - is it sitting on rubber mounts..?
@tinkertime7165
4 жыл бұрын
David Hayward, Very observant. Belt sizes! Not so easy to forget when the numbers are welded on to the guards! The cradle has a bit of flex. Not sure that is good long term. I am checking for cracks appearing at the welds!
Пікірлер: 13
Nice job Tinker So many things are getting done in a time like this its nice to live with fields around us Take Care
@tinkertime7165
4 жыл бұрын
littlejoey, thanks. Yeah, I am grateful for all the projects I can get onto. I expect some arn’t as lucky.
If you look at my only vid - it's also a saw - I chucked on a tilting table mechanism that does away with 90% of the sketchiness of using a big circular saw - it keeps you well away from the blade & also makes cutting pretty effortless as the tables spring assisted. But mainly, it keeps you out of harms way. :-)
This Is the kit I want if only i had the ingenuity to build it lol in all honesty the splitter and saw are a credit to you
@tinkertime7165
3 жыл бұрын
Thank you Steve, I have a good neighbour who eggs me on to do stuff like this! We are making a bandsaw mill right now!
Good job fella great stuff.......
@tinkertime7165
4 жыл бұрын
John Brough, thank you!
Cant wait to see the band saw mill I dont know if you subscribe to kris harbour natural building but hes just built a stunner of a portable mill
@tinkertime7165
2 жыл бұрын
I will have to take a look. In fact I think I have actually seen his.
What would be really nice there is a switch cut into the deck of the saw so when you push a log toward the blade, the throttle increases 🤔
@tinkertime7165
4 жыл бұрын
Yes, it can go on and on and on... down the rabbit hole! The knee throttle is really working well though. There are large pieces where you really need two hands and the ability to increase the power during a cut, if things start to go pear shaped half way through the cut if you release the throttle, the drive disengages, blade stops and the engine returns to idle. Ask how I know the value of this!
Well sorted bit of kit. A68 and A55 on the belt guard - any relevance..? I also noticed the engine rocking gently under load independently of the bench - is it sitting on rubber mounts..?
@tinkertime7165
4 жыл бұрын
David Hayward, Very observant. Belt sizes! Not so easy to forget when the numbers are welded on to the guards! The cradle has a bit of flex. Not sure that is good long term. I am checking for cracks appearing at the welds!