If you're into car detailing, I’m extremely happy to be able to now provide my viewers with some discount codes: carzilla.ca/?ref=Tg5JZODH Use discount code CARDETAILING5 at check out for 5% off. diydetail.com/?ref=xdbo85jh Use discount code TCDC10 to save 10% armourdetailsupply.com/?ref=5bfmnz4d Use discount code TCDC10 to save 10% ethoscarcare.com/?ref=zXxeLKf8phtQMD Use discount code TCDC10 to save 10%

@adedoyinz

Жыл бұрын

Please, the fob you buy on ebay do they come with the mechanical plate already or the new key you are using in this video, did it has the green mechanical plate in it before buying

@adedoyinz

Жыл бұрын

please, can you share the link you got your new key from

It worked, and I greatly appreciate it. The dealership I spoke to wanted $170 to program my fob. Thank you.

@moef.5326

2 жыл бұрын

scammers

@KayKeyTv

Жыл бұрын

See they doing the same with me & my grandfather is pressing it like NO!!! I’m going to buy the key and do it myself . This takes 2 seconds why is it almost $200 . Someone even said up to$300

I usually don’t comment on KZread videos but you saved me $120 so thankyou!!! I appreciate you’re generous knowledge you’re sharing with us.

Wow thank you soooo much dealer ship was charging me $160 I tried your method and it worked thanks for saving me money and for sharing 😀

Thank you! I only had one cut. So I took pin out started for 5 seconds or dings then took the old key and put in it the new fob then it started right up and connected the new fob.

Unbelievably easy. Thank you! No telling how much the dealer would have charged? Getting the keys cut was expensive enough!

my friend you just saved me $180 to have this key programmed . thank you !!

About to save my man $150 because the dealer wanted to charge him that. To start the car twice LOL. Thank you so much for this video

Can confirm this worked like a charm!! Bought a fob off Amazon and programmed it super easy. Saved lots of money!

@linhjade87

5 ай бұрын

Did you have to get the dealership to cut the key? I just purchased a replacement from Amazon.

@flyingwithpineapples

5 ай бұрын

@@linhjade87 I went to a local locksmith and they cut it with a special machine for a fee. Just look for a locksmith in your local area, preferably not a mobile one haha. Find a place with an actual shop and they should be able to hook you up

I rarely comment on videos but i have to thank you for this. The dealer in Los Angeles wanted to rip me off for $350 just to program, cost of key and cutting $180. Significant savings to simply buy online and have it cut by locksmith. Thank you

@elcomandante9299

6 ай бұрын

Bet they told u it was a three hour job plus programming.

I had a replacement fob that was already programmed. I replaced the battery and nothing. Tried this and now both remotes are working. Thank you for posting this information.

@TheCarDetailingChannel

2 жыл бұрын

No problem John. I’m glad I could help. Thank you for watching.

@lashellecoleman2754

2 жыл бұрын

@@TheCarDetailingChannel my key is too big so it want work in I don't know how to cut the key

Thanks a lot!!!! When I went to the dealership ,they wanted to charge me $150 for program it, I only pay for the key and I went to this Channel and did it myself and save myself a lot of money. So once again thank you 🙏 yo

@TheCarDetailingChannel

2 жыл бұрын

You’re welcome! I’m glad I could help

@AryanSharma-ei5sf

2 жыл бұрын

Where did you get your key fob from and for how much?

Hey man I just gotta say thank you! Literally did it in 1-2 mins of seeing this video!

@pimas11

Жыл бұрын

Hey you got a link for a good fob? If you can

That’s what’s up, thank you very much for the how- to, worked perfectly ‼️👊🏼😎👊🏼💯

Worked on 1st try! Thank you!

@TheCarDetailingChannel

3 жыл бұрын

You're welcome

Wow worked like a charm on My 2013 Cruze. Thanks man you save me some money.

@TheCarDetailingChannel

3 жыл бұрын

Thanks for watching! Dealer techs literally do the same thing when the customer already has one good key fob.

@chrisoreta

Жыл бұрын

I have a 2013 too...bought both fobs online for $19.99 each and gonna have them cut then program them myself...problem is, I don't have a Master key..only a sub key, so I'm afraid that I may eventually have to go to the dealership to program one then I program the other one myself...smh.

2013 chevy cruze. It work like a charm. Thanks

Awesome! I bought a couple fobs off Amazon and Ace Hardware cut them both for the price of one ($25.00) and this video was so easy. The guy would've charged me another 20 to do it himself

@andreamoreno5186

Жыл бұрын

Where did you get them cut?

@andreamoreno5186

Жыл бұрын

Wow completely missed that sorry 😅

@linhjade87

5 ай бұрын

I didn't know Ace Hardware would cut laser keys. Thanks for the information.

Man h thought it was this easy, dealerships are wildin 😂😂 thanks!

Thanks bro this worked for me they charged me $60 for the new key and they wanted to charge me an extra $75 to program it. But your method worked

@TheCarDetailingChannel

4 жыл бұрын

Awesome! Thank you for watching! I'm glad I could help.

@arjuncena4292

3 жыл бұрын

@@TheCarDetailingChannel bro im from India and I have a cruze automatic..and it has only button start. What am I supposed to do

@KayKeyTv

Жыл бұрын

Where you got it cut at

@kelliecato8018

Жыл бұрын

@Key you can go to any hardware store n get it cut

Wow it works like magic.Thanks bro

This took like 15 seconds to do with my broken key fob switching to the new one. 55 bucks in my region for 20 seconds of work. Wowowow.

Thanks for posting! 👍👏👏💯

Really Works!!Thanks

Thank you! It worked 🎉🎉

Will this method work with the car starter already in the car? As long as I have a key that works? Ty

Thanks for the video... easy as cake..m

This was surprisingly easy.

Tnx Bro. Works as describe🙏🏼🙏🏼🙏🏼🙌🏽🙌🏽🙌🏽❤️🔥❤️

The key is, as you said, let the car run 5 seconds. It worked on 2 new key fobs purchased from EBay. Thank you.

@marcperri7688

2 жыл бұрын

I got my car key remote from ebay do i need to get my key cut? or do i just program it only? Look forward to hearing from you or anyone on this channel. Thank you

@adedoyinz

Жыл бұрын

Please, what do you mean you bought it on ebay, what did you typed on the ebay search or all fob comes ready to work or what.

@KayKeyTv

Жыл бұрын

Did you have it cut?

Appreciate it man you saved me $150

@TheCarDetailingChannel

Жыл бұрын

No problem!

I have a 2012 chevy cruze that has both keys broken. I keep getting the service anti theft message. However, if I take the old key and get a new fob with a new cut will I be able to program it myself?

It works man!

Hi, I know this video is long but pls make me understand something, you know your old key that you showed in this video has a green panel in it, so what about the new on, do we need to get a panel and a battery into it before we do the process you just showed us on how to program it. Pls kindly let me know

thank you, thank you, and thank you 💯

Is that possible with a keyless ignition? I have a Chevy cruze sw 2013 and it hás smartkey, the car dont even has ignition! Thanks for you support in advance 🙏

Hi there My chevy has a start button Do you have any tip in that case ? Thanks

Hells yeah it works!

It also worked for my 2015

When you say key fob can you still program it without the factory key? I have a key that I use the turn the car on but it isn’t a fob key. It’s a regular key.

Thanks so much!

How much just to cut the key before the DIY? Would like to get some feedback on that!

What if you have just a key to start the Cruze but you have a new key fob will just the key still work to program the key fob with this method ??

Where do you get the new key cut?

can't believe how easy that was nice!! thanks!!

I have a different kinda key would it work ?

Does it work with European models like Astra from the same time too?

Thanks man

How to turn on the needle sweep in 2011 model

what if I don't have the original key fob , I've lost it and only have the new fob am I gonna have to pay 166 to program it...

Thank u so much ❤

This is great.

Thanks you soo much

My car doesn't have keyhole on the steering wheel. Is there other way?

Thanks for posting this. For some reason, when I do this I am able to get the car to start with the new key once, but even while it is running the dash reads “service theft deterrent system”. When I turn the car off, the buttons on the fob do not work and the new car will not start the car again. 2011 Chevy Cruze.

@rtlgurl

3 жыл бұрын

Same issue I'm having 2013 Malibu

@Speedyshorts_305

2 жыл бұрын

Having the same issue chevy equinox 2017 what do you suggest?

@alexgauthier7128

2 жыл бұрын

@@Speedyshorts_305 I ended up selling the car and never got the key to work.

Does this work for Holden Cruze aswell?

Where should i buy the key fob i have a broken key now please help me

would this work for the 2016 model?

thank you a lot boss u r save my 40box

Any try this on a 2014 Cruze in Canada?

THANK YOUUUUUUU !!!!!

@TheCarDetailingChannel

2 жыл бұрын

You’re welcome

Does anyone know if this works if you don't have a key fob already i just have the key. Can I buy a fob and have the key on the fob cut and do this to make it work.

How much to cut the key (without chip)?

Can this fob work in my Hyundai elentra 2011?

This method works on a 2015 Cruze as well🎉

What to do with a push to start dog

So if I order a key off Amazon it still has to be cut ?

Thanks bro

@TheCarDetailingChannel

2 жыл бұрын

Welcome

is this methode work for chevrolet aveo sonic 2014 ???

I have a question? My key fob has not laser cut it’s just blank? Will it still work or does it have to be laser cut in order for it to work?

@TheCarDetailingChannel

7 ай бұрын

It has to be cut

bless you. i hope you have plenty days of abundance and joy

Hi, i have chevy cruze 2011 LT 1.8 korean imported one.I have one key which open button switch not working. I need to make a new key. Can i order a key from ebay with circuit and do this for programming? And which mhz it supports? 315 or 433mhs to order?I will cut the key anyway.

@TheCarDetailingChannel

4 жыл бұрын

I'm not entirely sure if it will work on an imported Cruze, I've never dealt with one before

Thank you. It worked great. Blessings!

Thanks so much for the video. My key had physically broken off but just use a pair of pliers to turn the ignition while holding the fob against the steering column and di you instructions...work perfect and saved me 130 dollars from the dealership.

Same situation but I have a 2018 and it says service theft deterrent system. What do I do?

@TheCarDetailingChannel

3 жыл бұрын

I'd go to the dealer for that one. The 18s have a totally different system that I'm not familiar with.

are you sure that it doesn’t work in a chevrolet cruze 2015?

Would this process work the same with a valet key?

@TheCarDetailingChannel

4 жыл бұрын

I'm not sure, I've never tried with a valet key

so what if this doesnt work?

Hey...I bought 2 new fobs for my 2013 Chevy Cruze, because it only came with a sub key...no Master fob. After watching this video, I'm assuming that I can't program both fobs by using the sub key...am I correct?

@vivianrendon2094

Жыл бұрын

I have the same question !

@chrisoreta

Жыл бұрын

@@vivianrendon2094 I'm thinking of cutting the fobs elsewhere for $20 each, then programing one of them at the dealer...then program the other one myself.

@chrisoreta

Жыл бұрын

I was able to program them with thr sub key. I had them cut for $40 at Batteries plus Bulbs and then went home and programmed the fobs just like your video instructed....kudos to ya bro...thanks alot..you saved me some money.

@chrisoreta

Жыл бұрын

I was able to cut them for $40 and then I programmed them myself just as the video instructed.

So there is no programming?

Where can I get it cut guys for the low?!?? Everyone still trying to charge almost $100 just to cut it!

My key fob works except the remote start I say this to say that when I program the new key fob will the remote start work with the new key fob

@TheCarDetailingChannel

2 жыл бұрын

It should unless there’s an issue with the car itself. Some common things that cause the remote start to not work include a stored or active code, low fuel, hood ajar switch faulty

@Ravenwest9876

2 жыл бұрын

@@TheCarDetailingChannel thanks brother

Where I can get the blade cut?

@karinah.6516

3 жыл бұрын

He said the dealer

Wait do I need to cut the two buttons out I am confused on that

@paliazzar

2 жыл бұрын

No. That was the old key and it was broken.

@sunbaeniminsan

Жыл бұрын

Omg....swoosh.... My boyfriend's key fob is broken just like that...He just got a new one and I am trying to save him money by watching this....so he can do it himself...lol lol lol

What if it’s in theft mode

my car is a 2013 and it doesn’t have a place to put the key Bob in

You just saved me $125

What if the car doesn’t turn on

is this working for chevrolet spin 2013 ?

@TheCarDetailingChannel

3 жыл бұрын

Sorry I'm too sure, we don't have that model here in North America

Hello, This method hasn't worked for me... I have two original keys and all I did was replace the outer shell on one of the key fobs and now the key will not start my car but I can use all of the other functions on the key fob itself.... I have a 2013 cruze

@Alejandra-cv7rj

4 жыл бұрын

Weird because ive done this on several Chevy cruze 2012 models more on the 1.4 and 1.8 engines from my home. All I did was grab old that doesnt work remote. insert key hold on ignition for 5 secs to 8 secs then had the new remote with another original key i had. Turn on to ignition held for few seconds then I turned the car on. This works for me every time.

@Alejandra-cv7rj

4 жыл бұрын

Only thing I can think of is when you opened the remote did you drop the green part it had inside because the key is not connected to nothing electronic so it should not affect the new remote in any way.The other thing I can think of is that the key design wasn't done well and that's why the car doesn't turn on.

@auramakepeace3892

4 жыл бұрын

Where can I get replacement key not too expensive

@450rhino1

4 жыл бұрын

@@auramakepeace3892 www.banggood.com....China, $13.00 Canadian.

@TheCarDetailingChannel

4 жыл бұрын

That is very odd, it is possible that the key fob may be defective.

Bruh somebody was trying to charge me 100 bucks to fix the key then I find this and have hundred bucks for dinner haha

How much does the dealer charge to cut the key for you??

@brianjirvin

2 жыл бұрын

100+ if you buy it from them. One of the dealers in Alabama

How much did you pay for the key at the dealership

@TheCarDetailingChannel

4 жыл бұрын

I paid around $60 plus tax

@davidr4076

2 жыл бұрын

@@TheCarDetailingChannel Is the dealership the only place to have new key cut?

You just save me like $200. I paid $26 for a new fob.

@TheCarDetailingChannel

4 жыл бұрын

I'm glad my video was able to provide value Rene! Thank you for watching.

@chrisoreta

Жыл бұрын

I paid $19.99 each..online.

What about 2013 Chevy Malibu????

@TheCarDetailingChannel

4 жыл бұрын

Same process should work on a 2013 Malibu as long as you dont have push button start. If you have push start, you'll need a GM tech 2 which usually is unfortunately only available to dealerships

@jamesonoof5973

4 жыл бұрын

Your Average Canadian also, after the programming is success will the old key still work? So we’ll two operational key? Thanks!

@TheCarDetailingChannel

4 жыл бұрын

Old key will work perfectly fine

car starts with new key but buttons don’t work

I have a 2018 and I program the key and the bottons didn't

@TheCarDetailingChannel

2 жыл бұрын

2018 Chevys use a different system. You may have to use a scan tool to program that one

Is there a way to program a new key for 2010 Cruze? This method seems to not work for mine Chevy unfortunately 😢 Probably works only for 2011+

The Chevy dealership charges $99.83 for the key and $195.50 to program it here in Oregon 🤬

How much was the key?

@TheCarDetailingChannel

3 жыл бұрын

I paid around 60 bucks Canadian if I remember correctly

@kareem5296

2 жыл бұрын

@@TheCarDetailingChannel where’d u buy the key from