How To Program A Chevy Cruze Flip Key Remote Fob 2014 - 2019 DIY Chevrolet All Keys Lost Tutorial
Автокөліктер мен көлік құралдары
A quick and easy video tutorial on how to program a flip key remote fob to a 2014 - 2019 Chevy Cruze.
This procedure is for when all keys are lost for your Cruze. If you just need to add a key, you can find that procedure HERE • How To Program A Chevy...
More Chevrolet keyless entry remote fob programming instructions available at www.ProgramYourRemote.com
Key programming instructions available at www.ProgramAutoKeys.com
1. Insert a new cut flip key remote fob in ignition and turn key to the ON position for 10 minutes and 15 seconds.
2. Within 45 seconds turn the chip flip key remote fob to OFF and then back to the ON position for 10 minutes and 15 seconds.
3. Within 45 seconds turn the flip key remote fob to OFF and then back to the ON position for 10 minutes and 15 seconds.
4. Turn flip key remote fob clicker OFF then back ON. The key is now programmed.
Start vehicle to test key.
This programming procedure will program a new flip key remote fob to the following years of Chevrolet Cruze :
2014 Chevy Chevrolet Cruze
2015 Chevy Chevrolet Cruze
2016 Chevy Chevrolet Cruze
2017 Chevy Chevrolet Cruze
2018 Chevy Chevrolet Cruze
2019 Chevy Chevrolet Cruze
Пікірлер: 260
Man, THANK YOU SO MUCH. Was quoted $120+ from every locksmith in my area but was able to save my money thanks to you. I wish I could shake your hand through this screen lmao
@PYR-Auto
7 ай бұрын
You're welcome! Glad it helped
Man the dealership wanted to charge me almost $300 to do this. Worked like a charm! You guys rock
@PYR-Auto
2 жыл бұрын
Glad it helped!
@Maria-rw7dd
Жыл бұрын
Exactly what a joke.
@marcuslindsay1894
10 ай бұрын
So with the new key you buy from auto zone do you have to get it cut also
@Datrebor
6 ай бұрын
@@marcuslindsay1894 You might be able to remove the key part to replace the new uncut one. Mine only had one small pin that came out easily.
The fob died on my 2014 cruze and the dealership wanted us to tow the car there. Instead we bought a $15 replacement off Amazon and tried this. You saved us a ton of money thank you!
@PYR-Auto
11 ай бұрын
You're Welcome!
Thanks so much for posting this. I lost my keys and it would have been a tow fee and reprogram fee. This saved me so much time and expense. I really appreciate that you did this post
@PYR-Auto
4 жыл бұрын
Glad it helped!
Thank you very much. Man did you save me money. My dealership wanted to charge me over $120 for the key fob and over $80 to program it. I don't think that included the cost to cut the new one. I bought 2 key fobs for less than $20 on Amazon. Your method to program it was spot on. It was so easy to program it. I guess it was the time waiting is why they charge so much. I can't thank you enough so I subscribed and liked the video.
@PYR-Auto
6 ай бұрын
You're Welcome! Glad it helped
This worked just now on a 2011 Cruze. I ordered 2 uncut fobs off eBay for $14. The Chevy dealer cut my keys for free today, I think because they don’t want to be at fault if they don’t work.. anyways it cost me $14 from having no key to being back on the road. This video saved me atleast a tow and programmer. Thank you kindly
@PYR-Auto
Жыл бұрын
You're Welcome! Glad it helped
This video is fantastic, thank you, man! You have made me save money. It worked perfectly on my 2016 model of chevy cruze. God bless you. Cheers!
@PYR-Auto
3 жыл бұрын
You're Welcome! glad it helped!
As of 12-28-21, this worked great on my '14 Chevy Cruze RS.... thank you very much!
@PYR-Auto
2 жыл бұрын
Great! You're welcome!
I did the whole process on my Chevy Sonic 2013 and everything went well. Congratulations on the video
@PYR-Auto
Жыл бұрын
Glad it helped!
Tysm I did this by myself and I didn’t cut the new key I just opened up the old key and took it off and placed it on my new key 👍🏽 and then I reprogram the key like u said in the video❤️
@PYR-Auto
3 жыл бұрын
You're Welcome! Glad it helped
I just did this today 11/19/2022 and it worked perfectly. Thank you sir
@PYR-Auto
Жыл бұрын
Nice! You're Welcome!
Waited 20 minutes after the last pull and turn over it and it worked.
@PYR-Auto
3 жыл бұрын
Cool - glad you got it
Great tutorial! I did it step by step to activate my backup key & it worked perfectly! 😁🙌🏾
@PYR-Auto
2 жыл бұрын
Glad it helped!
@HiHello-ku1fl
2 жыл бұрын
@@PYR-Auto will this work with my old key/fob? I have two keys/fobs but for some reason I can't start my cruze. It doesnt do anything weird other than not start. The lights all come on normally on the dash etc. But when I turn it to start it then it doesnt start. I put in a new starter and that wasn't it. Everything tests good fuses/relays, fuse block are all testing good. Thinking either it lost the codes or I have a problem with the ignition ? I might try this if it will work with my two keys I have always had.
Worked like a champ for my 2018 Chevy Cruz! Thank you so much, saved me well over $500
@PYR-Auto
2 жыл бұрын
You’re Welcome! Glad it helped
@ginamartinez6550
6 ай бұрын
where did you get the key fob one? I have a 2017 and im having a hard time finding the exact match to the one I have now. only need a 4 button unlock, lock, open trunk and panic button one
9/8/23, just worked for us and saved us so much money! Thank you thank you 😊
@PYR-Auto
10 ай бұрын
You're Welcome! Glad it helped
Thank you man it worked perfectly freaked out because my alarm kept going off but turned off as soon as i did the last step great video
@PYR-Auto
10 ай бұрын
Glad it helped!
It definitely works I was skeptical but it worked great video
Ima be honest I didn’t think it was gonna work lmao. But it worked perfectly I actually am astonished you’re a godsend lol
@PYR-Auto
2 жыл бұрын
Great!
Tried this on my 2017 Cruze and it worked. I ordered a blank key online for about $50, then took it to a local hardware store to have it cut for $25. According to other sites, this procedure will render all other keys non-functional. If you have a 2nd key you want to use, once you finish the above procedure, remove 1st key, insert 2nd key, turn to on, then back to off. The 2nd key will now also be programmed. I originally had 2 keys, lost one, bought a new one, then reprogrammed the new key plus the remaining original key using this procedure. After each key was done the information center reported "1 key has been reporgrammed" then "2 keys have been reporgrammed".
@shabihulhasnain1164
2 жыл бұрын
Please share the link where you ordered the key from, thanks
Thank you so much for this video,worked like a charm for my 2014 chevy cruze you save me a ton of money! Thank you once again..
@PYR-Auto
Жыл бұрын
You're Welcome! Glad it helped!
Thanks, it worked. I was kind of crazy cuz the alarm kept going on Everytime. The only thing I couldn't get to work it's the remote start...🤷♂️ But that's no big deal. I'm Glad I run in to your video. I was just about to go to with one of those mobile programers, witch at least would of cost me 80$ up to 150$... Thanks a bunch...!!!
@PYR-Auto
3 жыл бұрын
You're Welcome!
Thank you sir your video save us a lot of money and time, I purchase a complete flat key fob from Amazon for $14 for a 2015 Chevy Cruze I took the old flat key and switch it with the new not cut flat fob key trust me you don’t have to go to the trouble by removing the pin just to switch the flat keys.
@PYR-Auto
3 жыл бұрын
You're welcome!
@andrewonrecord
3 жыл бұрын
How do you switch keys without removing the pin?
This actually worked thank you it saved so much money
@PYR-Auto
2 жыл бұрын
Great!
Thank you so much !!! I followed the directions of the dealership and it didn’t work, I did this and it worked!!! Thank you for your services 😂!
@PYR-Auto
2 ай бұрын
You're Welcome! Glad it helped
Thank you so much worked for my 2016 chevy cruze saved me atleast on towing and program
@PYR-Auto
2 жыл бұрын
You're welcome! Glad it helped
Thank you!!! It worked perfectly on my 2011 cruze
@PYR-Auto
8 ай бұрын
You're welcome!
Here in October 27 2022 it still works thank you soo much
@PYR-Auto
Жыл бұрын
Nice! You're Welcome!
This worked perfectly for my 2014 Chevy Cruz, thank you soooo much!!!!!
@PYR-Auto
10 ай бұрын
You're Welcome! Glad it helped
@hhguerra59
6 ай бұрын
I just need to reprogram but where does the flip key go, l don't see where
tried it and works on my Chevy Cruze 2014 as of 2/6/2024!!
@PYR-Auto
5 ай бұрын
Nice!
Awesome video , My daughters 2014 Chevy Cruz key fob went totally out and caused the car to go into a service theft deterrent mode.I followed the exact instructions on this video with a brand new key fob from the dealership and it worked perfect, car started right up . Thanks for the video.
@PYR-Auto
2 жыл бұрын
You're Welcome! Glad it helped
@dinagonzalez9898
Жыл бұрын
How much was the key fob from the dealer?
@jussrite4u
Ай бұрын
Worked !! Same situation
Totally worked! Oh man saved me a ton!
@PYR-Auto
10 ай бұрын
Nice!
Thanks so much for this man.
@PYR-Auto
Ай бұрын
You're Welcome! Glad it helped
Fun fact I did it only once and it work still
Thank you so MUCH!!!
@PYR-Auto
2 жыл бұрын
You're Welcome!
Thanks great video I think that pause your talking about is the ECU thinking to itself "well thats it he got me good I better get going"
@PYR-Auto
Жыл бұрын
lol
Love you man worked for my 2014 Chevy Cruze I had no other key I broke them bought a key from the dealership and did your method. Car was still alarming anti theft on and all disappeared I saved a tow and or locksmiths ❤️
@PYR-Auto
3 жыл бұрын
Glad It helped!
Thank youuuuuu!!!!!! God bless
@PYR-Auto
3 жыл бұрын
You're welcome!
I’m trying this, but when I put the new key, it says service theft deterrent system? And doesn’t work that gets deactivated when I put the original key. Do you think the replacement key might be out of frequency or not be right one.
Wowwww thank u so much!!! This worked great saved me money from going to someone wish I could hug u
@PYR-Auto
3 ай бұрын
You're welcome! Glad it helped
Thank you so much 😭
@PYR-Auto
Жыл бұрын
You're welcome!
I have a 2015 chevy cruze ltz and ordered new fobs because the buttons got pushed in on my original fob so now I can't remote start it. The problem is all the videos I watched to program this new fob shows a KEY to reprogram but I have a push button start. I haven't seen any videos on reprogramming the fob that way.. is there a way to do it ?
Am I able to take my old key fob apart & use my key 🔑 from my old key fob and hook it to my new key fob & it work? Just curious?
There is one final step to clear the service theft deterrent system massage. Once the new key is programmed, put the old key back in and turn it to the run position. This will clear the service theft deterrent system message when using the new key. It worked on a 2019 Chevy Cruze.
@hollyanzaldua568
2 жыл бұрын
What if u don’t have the old key
@bistechjf25
2 жыл бұрын
This video and this comment saved me 100$. Works for 2015 chevy Malibu 👌🏾
@thebrightspotsblog
9 ай бұрын
Thank you for this video AND for this comment. Worked for my 2015 Chevy Cruze. And if it weren’t for this comment, we would have started all over. Appreciate it!
@lisaboland2733
6 ай бұрын
does your 2015 have a push start? Mine does and I can't figure out how to program it. These videos show it with an actual key and ignition.. @@thebrightspotsblog
Thank you so much for saving so much time, money and hassle. jc
@PYR-Auto
20 күн бұрын
You're Welcome! Glad it helped
It works Thanks a lot
@PYR-Auto
Жыл бұрын
You're welcome!
I change the case and now the buttons on the fob won't work. Do I need to reprogram it?
Thanks much!
@PYR-Auto
2 жыл бұрын
You're welcome!
I love you 🍾🍾🍾
Thank you so much you saved me a toffee and another fee for them to reprogram it
@PYR-Auto
2 ай бұрын
You're Welcome! Glad it helped!
What if I have two new keys. Does this procedure automatically program a second new key if I have it lying around, let say, in the cup holder? Or I have to do this procedure twice, one for each (new) key?
@PYR-Auto
3 жыл бұрын
Use this procedure for the first key - then use the video linked in the description box of this video to add additional keys
What if my alarm goes off when I open the door and goes off again when I turn the ignition does it still work?
What if you don't have a traditional ignition? I have a push to start with a backup ignitian in between the front seats in front of the cup holders.
@PYR-Auto
3 жыл бұрын
You can find that video here kzread.info/dash/bejne/i5OAtsudic-dgM4.html
Thank you
@PYR-Auto
2 жыл бұрын
You're welcome!
Awesome!
@PYR-Auto
2 жыл бұрын
Thanks!
Hi, any recommendations if the key fob buttons did not activate? The key now works and I was able to start the car, but the buttons on the fob don't work.
@PYR-Auto
3 жыл бұрын
The remote portion should program at the same time as the key portion so I think you may have a problem with the Flip-key itself.
EXCELLENT
@PYR-Auto
3 жыл бұрын
Thanks!
To Easy, Thanks for the share. Last owner had Dealer supply and programme Cruze key/Remote over $800. No Comments, save I can source Key/Remote from Locksmith, less than $50, Ready to cut blade and program. Probably over $600AUD savings.
Can you program the proximity key at home?
will it work on a 2011 cruze?
If the current remote doesn’t have the remote start will it still program and that work on the new key?
@PYR-Auto
3 жыл бұрын
The remote needs to match you vehicles options, so if the vehicle doesn't have remote start then the remote start fobs wont work
So question will this work if I switched the key fob blades? Essentially I have the same key but new fob. Alarm went off as soon as I put key in ignition
@PYR-Auto
3 жыл бұрын
You changed the key blades but the transponder, the part that needs to be programmed, is still inside of your old key. Try holding your old flip key as close to the ignition as possible while you try start it with your new flip key. Once the vehicle is started and the alarm is deactivated - try turning the car off and then programming the new key as shown in the video
@nathanielcammon3294
3 жыл бұрын
@@PYR-Auto bet I'll give it a shot.
Do you have to have lock on door lock or unlock and can you get out of the car during 10 minutes procedure
@PYR-Auto
3 жыл бұрын
You can have it unlocked and get out of the vehicle during the procedure - I did each time in the video.
Will this work if my car alarm goes off the second the key enters the ignition
@nathanielcammon3294
3 жыл бұрын
Thats what I'm saying
Can anybody help hchevrolet Cruze use wich transponder chip
hi, i was trying same procedure for my chevry cruze 2015 since yesterday, the problem is anti theft light flashing continuously, and tried 3 cycles but anti theft light never goes off. pls help (meaning in this video anti theft light is constant, for me its blinking )
@PYR-Auto
3 жыл бұрын
I would recommend going off of the time rather than the security light. If that does not work there may be an issue with the key you are trying to use.
Quick question. Did you need to take your car to the dealership to have the key cut or for any reason?
@PYR-Auto
3 жыл бұрын
Yes, you will need the blade on the key cut by a Dealership or Automotive locksmith before you can do the procedure
@kimberlysmith4997
3 жыл бұрын
Thank you so much for answering this question. Thank you so much for making this video. I appreciate it so much. I liked an subscribed♡♡♡
Can you do one with the push button start like this or do we have to go to dealership.
@PYR-Auto
2 жыл бұрын
Yes, you can. All the instructions for the Cruze can be found here www.programyourremote.com/classified/cruze-browse-166.aspx
Will this work for 2012 key fob? No push to start. Thank you
@PYR-Auto
4 жыл бұрын
No , a 2012 Cruze requires that you have at least one working key in order to be able to add a new key yourself
@svamiddr
4 жыл бұрын
Program Your Remote Hey. I have one working key. How to add a new one? Cruze 2011
Great video bro. I could do this for reprogramming two keys?
@PYR-Auto
3 жыл бұрын
No - after you program the first key using this procedure then program the seconds key with the "add a key". You can find the add a key procedure in the description box of this video
hello! great video! quick question: i have a 2013 chevy cruze, the key turns my car on fine, but the fob doesn't work...how do i get both to work on the same key? i've tried changing the battery but it still doesn't work...what procedure will work using the same key? thanks
@PYR-Auto
3 жыл бұрын
What year is your Cruze?
@madicerco9416
3 жыл бұрын
@@PYR-Auto I have this same exact issue, mine is a 2014 Chevy Cruze. Will following this video work for me?
@kishacameron80
3 жыл бұрын
@@PYR-Auto 2013 chevy cruze
@jackiebergey181
2 жыл бұрын
Mine says service theft deterrent system? Is that normal
@jackiebergey181
2 жыл бұрын
It worked!!! ThankYou soooo much!! Don’t know about the key fob thiough
Hopefully you see this because I really need an answer but my car died and I broke the ke in the ignition I got it out and bought a new key at the dealership 2015 Chevy Cruze I was told to look up a video on how to program it but someone else told me this would lock my car up pls help??
@PYR-Auto
3 жыл бұрын
It should not lock using this procedure
Hello , i followed the steps , keys starting the engine but remote functions are not working .
What if I don’t have the spare or original? Is there someway I could get a cheaper key and do this
@PYR-Auto
2 жыл бұрын
If you have no key to copy you will need to a dealership or automotive locksmith to cut the new key by code.
I have a 2018 chevy cruze with one functioning flip-key fob. i purchased a new key from the dealership, had it cut there & attempted the easy turn on/turn off method - of course it didn't work. my question is if i try this procedure (the 30min one as if i had no functioning remotes) can i reprogram the original keyfob myself with the simple on/off procedure. From your videos i see that the original key won't function now. my fear is i will end up with NO functioning keys. dealership told me i could try the 30min on/off process - that it wouldn't harm the car. having them program this will cost another $120. of course, this model year -2018- seems to either need both keyfobs or none. advice?
@davidkhabalashvili1581
Жыл бұрын
I have the same issue, how did you solve this issue?
Does that program the buttons on they key fob?
@PYR-Auto
2 жыл бұрын
yes
Hello, will this work on a 2012 Chevy Cruze?
@PYR-Auto
2 жыл бұрын
No
It worked on a 2015 chevy cruze. I did it just like in the video. Only difference the alarm goes off for each round. I started the first round and set a timer. Then I would get out and shut the door for each round. I would re-enter the car 30 sec before and then repeat for the full 3 rounds. The alarm goes off for each round. Which is confusing at first. The alarm will shut off after the last round and the dash will clear
@PYR-Auto
3 жыл бұрын
Thanks for sharing
For some reason the light won't go off on my Trailblazer. Tried waiting further 15-20 mins, still the same, security light does not go off. Any possible workaround?
@PYR-Auto
Жыл бұрын
try just going off the the time rather than the light
Clarification, this is if you Do Not already have a working key and only have the new unprocessed newly cut key, right?
@PYR-Auto
2 жыл бұрын
yes
Can’t get the locks to work with the remote. Car will start though. Any suggestions?
@PYR-Auto
2 жыл бұрын
The first thing to try would replacing the battery in the flip key
Do you have to leave your door open or have everything off in the car
@PYR-Auto
4 жыл бұрын
The vehicle needs to be off but you can open or close the door during the procedure.
I've done exactly as your video directed and it didn't work now both keys old n new won't start the car please help
@PYR-Auto
3 жыл бұрын
The first thing I would try is to go through this procedure again using your "old" key.
Hopefully someone can help me. I recently broke my 5 button 2015 Cruze Key fob(Got ran over as I pulled my keys out my pocket and a close vehicle hit them) The key part is fine, but the Programed button part doesnt work at all and my Cruze enters Theft Prevention if I try to insert and turn key. I went to Autozone to get a key fob that looked similar but it didnt come with any sort of internal chip. Im wondering where can I find one easily programable or do I need a locksmith of some sort?
@PYR-Auto
2 жыл бұрын
check out bit.ly/CarAndTruckRemotes
Hi I have a Holden Cruze 2009. How can I program the new key please? Thank you
@PYR-Auto
Жыл бұрын
All of our key programming instructions be found at www.ProgramAutoKeys.com - however the instructions are only for vehicles built for the US market
@chuotxynk3663
Жыл бұрын
Thank you
Does it work with European models like Astra J too? 🤔
@PYR-Auto
5 ай бұрын
not sure on the Astra specifically but usually overseas vehicles have different programming
I did this but the fob will still not lock or unlock the doors
Great video. Would the remote buttons work as well or is it a different procedure?
@PYR-Auto
4 жыл бұрын
The buttons will work as well, the whole flip-key programs at the same time
@craigboles7985
2 жыл бұрын
Yes
Would this work on a 2013 chevy cruze with all keys lost?
@samekindofmusic8950
4 жыл бұрын
Update it worked
@PYR-Auto
4 жыл бұрын
Cool, glad you got it to work
@tendongzisylvester9016
4 жыл бұрын
Please my Chevrolet is not starting it need to be program
@DIZEMANPHOTO
3 жыл бұрын
If all of your keys are lost, what do you use as a guide key when cutting a new key?
Work on 2015 Chevy spark??
@PYR-Auto
Жыл бұрын
yes
If you have antilock notification can you still program?
@PYR-Auto
2 жыл бұрын
it depends on what is causing the antitheft mode - sometimes that will prevent programming and sometimes it will not
@olabanjistv4626
Жыл бұрын
I have the anti theft on mine is there a way to get past that ?
@courtneyyoung3529
Жыл бұрын
@@olabanjistv4626 Yes do those steps and turn the key to the on position. it may need a little force
How do I get the key cut if I lost all my keys?
@PYR-Auto
3 жыл бұрын
It will have to be cut by code. Dealerships and some automotive locksmiths have access to the codes.
Do you sell pincodes?
@PYR-Auto
3 жыл бұрын
we do not
How would I go about doing this on a 2017 Chevy Cruze Ls with no push start. My first key got ruined and got a second key from the dealership. Was wanting to program it myself but can’t find anything to help me with that process.
@jackiestacy3565
4 жыл бұрын
Ps: still have the first key, just the motherboard in the key got fried and now I can’t use any of the buttons
@PYR-Auto
4 жыл бұрын
I did some research and it looks like this procedure will actually work up until 2019 on the cruze, I changed the title of the video to reflect that. You can also find this procedure in your owners manual.
Can you make a video adding a new key with the original one working still
@theofficiallilnova
9 ай бұрын
for the 2nd gen cruze
@theofficiallilnova
9 ай бұрын
it works you just got to put your original key back in and try to start it for a sec and it will get them both for 2nd gen
would this be working for Chevy Cruze 2010-2011? Thank alot man.
@PYR-Auto
4 жыл бұрын
Unfortunately it will not
@kld5140
4 жыл бұрын
Thank you so much for your reply. I've tried it on the mentioned model. and at first everything goes brilliant and the worked properly, but then the owner of the car call me back to tell me that the car wouldn't crank again. !!!!!!!! Khaled from Libya.
Can you do this with push to start models?
@PYR-Auto
3 жыл бұрын
No, they use a different procedure
@mochenmat
3 жыл бұрын
@@PYR-Auto any chance you'll be covering that? 🙏
@PYR-Auto
3 жыл бұрын
What specific vehicle is it for?
@jojograffsgnino276
3 жыл бұрын
@@PYR-Auto I have a 2012 Chevy Volt with push-start also need to know what procedure Will work for it? A video would be good on this car...
Damn I unplugged after the second 10 minute wait b/c I thought my battery died lol. Think it’ll still work if I plug back in immediately and do the last 10 min?
@PYR-Auto
2 жыл бұрын
I believe you will need to start the process from the beginning
@AKUJU
2 жыл бұрын
Darn okay, I finally was able to do it. I just needed to turn it on and off and immediately put the new key in and turn on to sync
@PYR-Auto
2 жыл бұрын
Yes, that is the procedure to add a key. The 30 minute procedure shown in the video is for when all keys are lost.
@AKUJU
2 жыл бұрын
@@PYR-Auto hahaha thatnks, I probably should have paid more attention to what you said rather than skipping around
I need to reprogram my old key so I can have to ...how do you do that ....can u play a video please
@PYR-Auto
Жыл бұрын
the video on how to add a key to a Cruze can be found here kzread.info/dash/bejne/maejqaiBZre3Zco.html
Same process for a 2011 Cruze?
@PYR-Auto
3 жыл бұрын
No - unfortunately there is no manual procedure for a 2011 Cruze when all keys are lost
@jamesbarr9246
3 жыл бұрын
So would have to go to dealer for relearn then?
@PYR-Auto
3 жыл бұрын
Yes. If all keys are lost you will need a dealer or automotive locksmith.
@lesliexr558
Жыл бұрын
What about a 2013?
How do get key cut
@PYR-Auto
Жыл бұрын
Automotive locksmith or dealership