SAND CASTING LESSON FOR BEGINNERS - STEP-BY-STEP - (A 3rd HAND) - MSFN
Тәжірибелік нұсқаулар және стиль
A Detailed Video Aluminum Casting Lesson Covering Everything You Need To Know As a Beginner Metal Caster To Get Started. A Start to Finish Video. Starting With An Idea and Casting Up a Finished Project…..
SEE HOW I MAKE MY GREEN SAND: • DIY GREEN SAND FOR CAS...
Details about Placing Patterns, Ramming Up The Flask, Putting in Sprues, Gates & a Riser then Finishing Off The Casting To Produce The Finished Product. Thanks For Watching & Please Subscribe For More Videos Like This!
Пікірлер: 1 400
My professor had my class watch you for a lecture assignment. This video was humorous and enlightening! The process is really cool to watch, and the end result is satisfying.
@MakinSumthinFromNuthin
Жыл бұрын
Thats Awesome! Say hello to the class for me!
There is almost no you-tube video without negative comments. Some think that is normal, some get irritated by these regular criticizers. I for one do understand what this guy is talking about, but I have no experience whatsoever. I appreciate the effort and find the content very useful.
This probably taught me more about practical metallurgy than my senior elective metallurgy class in college. Thanks, from a materials scientist.
@MakinSumthinFromNuthin
6 жыл бұрын
Wow, thanks for the kind words and thanks for watching 😊
@nseudofa4651
3 жыл бұрын
@@MakinSumthinFromNuthin the holes was drill at what inch diameter?
@voidjumpingwingmanpewpew1978
3 жыл бұрын
@@nseudofa4651 the hole was 7mm so around 0.28 inches
@richardstrick
3 жыл бұрын
Senior elective in College? I thought I was taking and easy class with “Canoeing”. 🤣😊
@alegotronnortogela7695
2 жыл бұрын
love to hear shit like this. classrooms sometimes can be redundant
You helped a 1st year high schooler thanks
@MakinSumthinFromNuthin
7 ай бұрын
Great!! They teach casting in school nowadays????
This was so educational, thank you a lot mate. Our teacher shared this to us during a lesson and we learned something new today yes.
Really helpful. I’m doing engineering and the last time we did sand casting was like 7 months ago. Really helped refresh my memory. Thank you 🤩
Thank you! Watched this while on quarantine at home as a pre-study for our Foundry and Casting class. Am excited to do this back in school when the quarantine is over. Sending love from a mechanical engineering student!
@MakinSumthinFromNuthin
3 жыл бұрын
Sorry for the late reply, hope all went well!! 😊🎉🤗
@walter2990
3 жыл бұрын
What schools offer Foundry & Casting classes? Are they open to non-degree seeking old folks?
This is about as simple as you can get. Good stuff! I use to work in a casting plant that made railroad wheels and the frame work for the wheels that mass produce them. I worked in the pattern shop. Very interesting job and I learned a lot. Mass production is the same as here, other than machines doing mostly all the work.
Hi From Oz, Great to have someone that can give such info in an easy informative manner, Thank you . Love the accent.
@MakinSumthinFromNuthin
7 жыл бұрын
YW, I have friends from down under...good people there 👍🏼
I love seeing good, homemade videos like this that explain in clear terms how to do stuff. Thanks for making this video!
@MakinSumthinFromNuthin
Жыл бұрын
Thank you Toby!
I made myself a forge to melt aluminum, and my dad wanted me to cast a trench knife. This video just explains how i can take my 3d object and cast it correctly. Thank you!!
I am a novice engineer and am looking to manufacture parts for a prototype machine, I love traditional ways of making things by hand not to mention this is technically recycling metal and is proving to be a viable option until I get into 3d printers, awesome video you inspired me!
3rd hand is exactly what I need, had actually planned to make my own instead of buying one for $10 from ebay. Thanks for posting.
@MakinSumthinFromNuthin
4 жыл бұрын
Yup!
Finally someone to show everything from start to finish with the names of everything ~ ty!!
@MakinSumthinFromNuthin
5 жыл бұрын
Your welcome! Refreshing to see a woman commenting on a video of mine...rarely happens! Best of luck to you and be safe casting! Thanks for the subscription! 😊 ~ Richard
@violet_skrs
5 жыл бұрын
My thoughts exactly, i've been wondering what the powder people have been using when making the mold. So now i know what it is and why its used.
Thanks for taking us through the process at this level of detail. This really helped me.
I was wanting to add something special to my projects and immediately thought of metallurgy, but had no idea what I was doing. Thank you so much for all the information.
@MakinSumthinFromNuthin
3 жыл бұрын
Awesome, hope it helps!
Thanks man, this has really helped me with my engineering a level assignment
love the Mardi Gras reference , I'm from New Orleans so its spot on haha.
@MakinSumthinFromNuthin
7 жыл бұрын
LOL, I forgot about that part! 🍺🎉
@dildoshwagins2222
4 жыл бұрын
Jace Hebert same same
HI THIS HAS HELPED ME OUT A LOT , AS I HAVE MADE MOULDS FROM RUBBER , BUT NEEDED TO STEP UP TO GOLD OR SILVER , SO SAND MOLDS HERE I COME . THANK YOU .
@MakinSumthinFromNuthin
4 жыл бұрын
Thanks for watching! 😊
Working on my first casting project this weekend. Thank you!
Just started engineering, and you boosted me the very basic chapter. Thank you so much Sir. Even i will help others like you.
@MakinSumthinFromNuthin
5 жыл бұрын
Excellent, glad I was able to help !!
You really say things in a simple way so it can be understood, and I thank you for that. You don't just talk to fill space on film. I hate when someone goes off on talking about some other thing,when I want them to get to the point. You were very helpful and thanks again sir.
@MakinSumthinFromNuthin
4 жыл бұрын
Thanks for the kind words Bradley 😊
I wanted to say that I have seen other tutorials, you made it look far easier then it probably is. I'm dyslexic oh, so a good tutorial such as yours makes the difference
thank you so much for being one of the only on here to actually go step by step as to how to start and accomplish such project!
@MakinSumthinFromNuthin
3 жыл бұрын
TY!!!!
Great video. That will help out a lot when I finish my foundry. Now I'll try to help you out. When soldering electrical components, or wire, or anything other than pipes, DON'T use plumbing solder and flux. It won't flow well at all. Use a quality rosin cored solder and flux, and stay far away from that lead free crap. You'll be amazed at the difference (and ease) it takes to solder up electrical equipment. Thanks again for your great and informative videos.
@MakinSumthinFromNuthin
7 жыл бұрын
Thanks F5, you are absolutely correct...and its even more reason why I dont do soldering for a living! LOL :)
I like the fact that you answer people on here, great upload.
@MakinSumthinFromNuthin
5 жыл бұрын
Thanks, I always reply to comments if I am aware of them :) Thank You for watching and commenting on the video ~ Richard
Thank you! I learned something tonight about sand castings that I didn't know.
Thank you so much! my entire life, I’ve wanted to learn how to make things. Specifically, everything. But when you’re a girl, they hide certain knowledge. When I wanted to take auto shop or wood shop in high school, guidance, counselor told me “you are on more of an academic track.“ like I’m never going to need to know how to maintain my vehicle or understand when a mechanic is being less than ethical about my needed repairs. I’m so glad I started the search that landed me on your channel.
@MakinSumthinFromNuthin
3 ай бұрын
So glad you stopped by!!, have a wonderful day!!
thank you sir this has helped me alot in my university course Love from Dubai
@MakinSumthinFromNuthin
7 жыл бұрын
Great, glad it helped. Good Luck!
@Kamal_AL-Hinai
5 жыл бұрын
حبيب
@planetindustries731
3 жыл бұрын
kzread.info/head/PLkRKOXpBzgXQcbtItPlkScngoNmYCiAgG
Just got a few items together for my first try at casting, thanks for taking the time to put up this video
@MakinSumthinFromNuthin
2 жыл бұрын
Awesome, stay safe!
I really appreciate this video, thank you. I've got an old motor bike, and some of the missing original parts are simply unobtainable, you've given me the confidence to attempt making them myself.
@MakinSumthinFromNuthin
6 жыл бұрын
Thats great, best of luck on making them!
@MakinSumthinFromNuthin
6 жыл бұрын
I also do machine work (see my recent videos) if parts are needed to be made from scratch
You rock! 5 of us watched to make sure we understood the process and safety issues that may arise. You were both informative and entertaining-Thanks.
You got another subscriber! Really enjoyed your details as I've always been interested in sand casting. Thanks!
@MakinSumthinFromNuthin
6 жыл бұрын
Thanks! Glad to have you aboard! 😊
I have a 1969 Honda CB750 'Sandcast', one of the first 3000 CB750s ever built and I always wondered what the 'sandcast' part meant -- excellent video! The people at Honda made the first 7400 or so Honda CB750s ever sold to the public using sandcasting metal forging. Wow, they busted their bauls to make these first few thousand. I'm guessing they weren't sure if the CB750 model would sell enough to justify tooling up an actual production line so this sandcasting technique was a cost-savings in case the CB750 model failed in the marketplace (it didn't fail). . .
@MakinSumthinFromNuthin
5 жыл бұрын
Cool story!, thanks for sharing!
@jtp336
4 жыл бұрын
Not to take anything away from this very informative video, but Honda's sand casting methods by the late 60s were absolutely nothing like what's being shown here. Check out this Edelbrock foundry video, it'll better put you in the mindset of what was happening at Honda back then. kzread.info/dash/bejne/lZ-W0tNvf9LPdbw.html
A very good tutorial. Learned a lot about sand casting. Thank you very much!
I am a patternmaker and this is a great video, simple but informative. Great job.
@MakinSumthinFromNuthin
6 жыл бұрын
Thanks Arthur, much appreciated 😊
Thanks man! I've really been wanting to get into metal-casting.
@MakinSumthinFromNuthin
4 жыл бұрын
Thx for watching!
I am about to do this, i use burnt candle instead of medal. Thank you for posting such a helpful vid.
@MakinSumthinFromNuthin
5 жыл бұрын
That sounds fun! Good luck!
Thank you for the information! I'm excited to start casting
@MakinSumthinFromNuthin
4 жыл бұрын
Thanks for watching! 😊
This basic foundry was a part of my 7th grade industrial arts class. I still have the sweet American Eagle from recycled aluminum cans we poured. Had a 2 man pouring pole with a sizeable "bucket" of liquid alu men ium. Poured all 14 sand boxes in one swipe. English teacher was on the tender end. Hammerschmit The Shop Master Teacher barking orders. Best instructor I ever had. RIP Big Al.
yeah ! this video is great and helped me in my study of manufacturing technology....thanx very much sir!...greetings from india
@MakinSumthinFromNuthin
6 жыл бұрын
Glad it helped you out!! Greetings from Florida, USA :)
Many thanks! Very informative yet simple to understand, has helped me with my Design Tech exam Thanks from England!
@MakinSumthinFromNuthin
6 жыл бұрын
Terrific!, cheers from USA! :)
Being a "maker" myself, I appreciate the 'crisp' method of teaching. Plus, I picked up some tips and will add to my own knowledge base. I've been casting copper for a while and am ready to refine some of my techniques. This helped, thanks!
@MakinSumthinFromNuthin
6 жыл бұрын
Thats excellent, I am glad you found the video useful. Thanks for the kind words 😊
Skillful, clean and kind. Thanks for such a good video
I have learnt more in one video of 14 minutes than in a 2h lecture.. thank you
@MakinSumthinFromNuthin
6 жыл бұрын
Great!!, I have other casting videos as well :)
@planetindustries731
3 жыл бұрын
kzread.info/head/PLkRKOXpBzgXQcbtItPlkScngoNmYCiAgG
Thank you for this lesson! Now I know how to sand cast. :)
@MakinSumthinFromNuthin
7 жыл бұрын
YW, I have other videos on how to make the sand, the wood boxes, crucibles and furnaces if you care to take a look! :)
@nicolagrunder6885
7 жыл бұрын
Oh cool, i'll take a look at these too. very helpfull.....
Wow! Thanks for the demonstration! I need to make something with aluminium and I think that casting it in sand is what I want to do. Great to see how it was done.
@MakinSumthinFromNuthin
3 ай бұрын
I have a video on my homepage on how to make the sand
This clarifies many questions I had. Thanks for a good video!
@MakinSumthinFromNuthin
5 жыл бұрын
Thanks Dean!
Good content. I'm planning on casting a silver ring and wanted to learn more about the technology.
@MakinSumthinFromNuthin
4 жыл бұрын
I hope the video helped!
Thank you! My professor and I will be using this for castings on campus
@MakinSumthinFromNuthin
5 жыл бұрын
Excellent, glad to hear that!
@ericosalandanan1246
2 жыл бұрын
@@MakinSumthinFromNuthin how long does it takes to solidify the molten metal?
@MakinSumthinFromNuthin
2 жыл бұрын
@@ericosalandanan1246 not long at all, I give it 15 minutes or so
Hello, thank you for sharing. This is my 1st video I watch about casting, though I'm looking for making a mold from a wood carving into a non metal cast. I really enjoy your video and thank you for sharing your many years experience doing this. I will continue my seach so I can start making what you started many years ago. Blessings to you.
@MakinSumthinFromNuthin
2 жыл бұрын
Best of Luck!!!
i would love to see more castings! great work!
Great Video! Really informative for beginners. Only thing I think that could have been shown or demonstrated better is making a smaller version of the pour cup placed over your vent. Loose metal spilling out could cause problems for potential beginners. A small funnel cup over the vent can help control the metal better as you fill your mold. Otherwise, well done!
@MakinSumthinFromNuthin
7 жыл бұрын
Thanks, consider subscribing if ya havent already :) Funny you say that, see my newer video on casting the Virgin of Guadalupe....I do just that! ...or something very similar, I didnt need an extended riser:)
Great work, helped me with my exam Thanks a lot :)
@MakinSumthinFromNuthin
7 жыл бұрын
Glad it helped...I didnt know they taught sand casting ??
@lanrelogan2468
7 жыл бұрын
They do in my product design: resistant materials A level (high school) course in Britain! This was perfect thanks!
@MakinSumthinFromNuthin
7 жыл бұрын
Greetings from USA 🎉 :)
Thanks very much for a great video describing the process. I went on a 'grinding wheels' course in 1981, the training was a requirement for classroom teachers delivering metalwork classes. I still remember the holes in the roof above the grinding machine in the training centre. They'd decided to leave the holes there to reinforce the consequences of misuse of high RPM wheels. With bench grinders, it's important not to grind soft metals such as aluminium, copper etc as the metal clogs the wheel and causes it to become unbalanced, then potentially break up and part company with the drive spindle. Over the years, I've developed a technique for grinding my wood turning chisels, which involves standing to the side of the grinding wheel - out of the line of fire :) :)
@MakinSumthinFromNuthin
3 ай бұрын
Thanks for the good story, I was new to wheels at the time it was filmed. I am glad they left the holes :)
Thanks for the video! I really appreciate it. I watched many shorts on youtube about sand casting, and though watching the process itself is very satisfying, I was intrigued and wanted to know why some steps are done. Now I know the principle, so thanks a lot!
watching in 2020 for my manufacturing final exam, also the fan noise was no problem at all thanks for great vid
@MakinSumthinFromNuthin
3 жыл бұрын
Thanks!!!!!
First let me start by saying I enjoyed the video. I just had a couple quick questions about the video. 1 was there anything mixed with the sand like water or some type of adhesive? and what type of sand was it. 2 what was the type of metal used? aluminum, lead or some mixture of tin? Thank you in advance for your answers to these questions.
@MakinSumthinFromNuthin
4 жыл бұрын
Thanks! :) I have a tutorial on making the casting sand (green sand) kzread.info?ar=3&o=U&video_id=2rAQxw6X6uc The material melted was scrap aluminum
What a fella ! Thanks for making and sharing this video. It's truly appreciated !!
Exceptional dimensional accuracy without the final finishing.. Nice work
Nice video, Sir. Appreciate the work.
@MakinSumthinFromNuthin
5 жыл бұрын
Thanks Ayush! :)
awesome video! As far as the fan noise you can separate the audio from the video clip and then delete the audio. If its a long scene you can just add some music or a voice over!
@MakinSumthinFromNuthin
5 жыл бұрын
For what google pays y'all will have to learn to live with a fan noise if present in videos. LOL
@TitoTheRaccoon
5 жыл бұрын
Well I was just trying to help. It takes 2 seconds to do it if your on a Mac idk about PC, The better the videos come out the more people watch and for longer, then KZread promotes your videos better.. If you want any tips feel free to email me! But really good video I’ll be doing some casting soon! Do you have a video on how to make a foundary?
@MakinSumthinFromNuthin
5 жыл бұрын
I meant no offense, in my older videos you will find 2 videos on how I made my foundry(s). One is for a brass foundry, the other about the one you just saw in the video
@solemankhan316
3 жыл бұрын
Xxx
@footrot17
2 жыл бұрын
I turned on my fan, it blends in nicely
Well done! Was worth my time, unlike most KZread videos, so thank you!
One of the best instructional videos I've watched. I really learned a lot from this.
@MakinSumthinFromNuthin
3 жыл бұрын
Glad it was helpful!
Great video dude I subbed to the channel, this is a 6 year old video, you could say I completely understand if this comment flies in under the radar... There's this thing I've been saying for the last 30 years. I saw it on a sign or something once and it just, I guess made an impression on me "We the able, have done for the unwilling, so much, for so long, with so little, that we are now capable of doing anything, with nothing at all" . .if there's one thing I absolutely love to do it's make stuff. Nothing I make is ever marked in any way to indicate who might have made it. I'm not interested in personal credit. I just want to think that when I'm gone, I've left something behind me that in 100 years someone will pick it up and say to his buddy " hey man check this out, how cool is that" they don't have to know my name I just want them to kinda feel what I did when I made it
@MakinSumthinFromNuthin
Жыл бұрын
Thanks for the great comment, hope the video helps you down the road~Richard
@richardcranium5048
Жыл бұрын
@@MakinSumthinFromNuthin no doubt it will. I expect to this weekend make a first for me sand casting. A fairly large ballpen hammer from a copper aluminum I made yesterday 90% copper 10% aluminum it seems pretty tough based on my limited testing
Thanks you sir
@MakinSumthinFromNuthin
6 жыл бұрын
You are welcome!! :)
Thank you for the great video tutorial! I will try it out on a project someday 👍
@MakinSumthinFromNuthin
5 жыл бұрын
👍🏼😊
Fantastic video! Very helpful for my Manufacturing Engineering course. Great to see visual representations of the terms we talk about.
@MakinSumthinFromNuthin
6 жыл бұрын
Thanks, great to see a woman watching & commenting on my videos. Best of luck with your course! 🤗
Why isn't your bench grinder secured to the bench?
@MakinSumthinFromNuthin
6 жыл бұрын
It is now, not sure about then....
@Kenneth_James
6 жыл бұрын
Because hes poor. A hole
There's no need for a vent for the gasses to escape. The gas escapes through the sand.
@MakinSumthinFromNuthin
4 жыл бұрын
i usually put one out of habit
@morkusmorkus6040
4 жыл бұрын
@@MakinSumthinFromNuthin Yeah fair enough. I'd recommend the following quick vid which shows how gas vents arent necessary, possibly even being detrimental: kzread.info/dash/bejne/YmZo27GGkpm1eKw.html
Hey thanks a ton! I was just introduced to a "builder space" that my Va rec therapist took us too. I'm going to share this with him for sure, this looks to be a fun first project for the metal/forge side.
Thanks for sharing your skills - much appreciated.
@MakinSumthinFromNuthin
7 жыл бұрын
YW! And Thank You for Watching! Please consider subscribing if you enjoy the content :)
Look what molten metal does to wood! Imagine what would happen if it splashed on bare skin or nylon shoes and socks. Just saying, use common sense.
@MakinSumthinFromNuthin
6 жыл бұрын
Yes, hot stuff, approx 1300+ degrees
@P51DDreamer
5 жыл бұрын
Tee shirt, tennis shoes and shorts is not safe attire for metal casting. No safety face shield either.
@Aarona-lj6wp
5 жыл бұрын
There is a hospital in trip in their future with these safety practices
@d_boi9345
5 жыл бұрын
Just cant be clumsy ;)
@P51DDreamer
5 жыл бұрын
Clumsy shouldn't be doing this in the first place. Still safety gear is needed. Even graceful people have unforeseen accidents.
Is it weird that I am 10 and do this stuff and do mechanical engineering
@MakinSumthinFromNuthin
5 жыл бұрын
Excellent! I think you are going places! 😊
Thank you...I've taken a bronze casting class using the loss wax method and now want to do it at home with the sand casting method. Your video is very helpful!!!
@MakinSumthinFromNuthin
4 жыл бұрын
Nice!!!! 😊
exactly what my teacher was telling me in class and it was like a story, its good to also know the practical also...thanks sir
@MakinSumthinFromNuthin
5 жыл бұрын
Hope it helped to see it done Donald!
@buckyscottsman
4 жыл бұрын
What class?
I’m just now learning about metal casting, I’m using Bismuth, and I’m very excited for the possibilities of solutions to some problems I had that now seem to have an answer, that’s for the tutorial,
That was really cool! Thanks for showing us! We got recommended to watch this video as part of our manufacturing class at UF
@MakinSumthinFromNuthin
3 жыл бұрын
Wow! Awesome!!
Good job with the project and the video. I love how handy and frugal you are with the projects. Keep it up. Best Matt
@MakinSumthinFromNuthin
7 жыл бұрын
Thanks!, Glad you enjoy the content :)
Thank you. Your clearly laid out information and instructions was so helpful for a complete beginner like me
@MakinSumthinFromNuthin
4 жыл бұрын
You are so welcome!
Thanks for this great video. I was able to show it to my wife so she could see what I used to do as a job. You got the whole process shown really nicely.
@MakinSumthinFromNuthin
3 ай бұрын
Thanks for the kind words!!!
Cool....your part looks great! Thanks for the lesson!
Very educational thanks for the tutorial on sand casting I just got a smelter going to be doing this very soon
Thanks for the efficient and respectful teaching!!! LIKED, SUBSCRIBED, & commenting about SHARING with coworkers!!
That was extremely interesting and educational … Thanks!
Great video! Thank you for your time and effort. I certainly learned a lot.
@MakinSumthinFromNuthin
6 жыл бұрын
Thanks for Watching!
Great Video, looks like your project turned out awesome. Thank you for sharing it
@MakinSumthinFromNuthin
5 жыл бұрын
Thanks Kent!
This will really help sir thank you 🙏🏼.. Because it is very difficult to learn such things at online classes .... Really appreciate your efforts
NICE JOB!!! Thanks I've wondered about how sand casting is done
thank you for taking the time to do the video, Ill soon be casting and will do this as my first lesson. Ill post my video when i get'er done eh ;) again thank you for your invested time and dedication.
Thank you, i needed this video so i could make a mask. It is a design that i have and i need to make several parts for it. I decided that it would be good to cast the outside from metal.
@MakinSumthinFromNuthin
4 жыл бұрын
Hope it helps!! 😊
I've been learning to 3d print but have always been interested in metal working so I'll be giving this a try soon I hope
Really amazing step by step explanation sir. Thanks for sharing your knowledge
@MakinSumthinFromNuthin
5 жыл бұрын
😊 Thanks for watching!
I see that Henry sticker in the back. I bought a Henry for Christmas. X Model, .357/38 w/sidegate and threaded barrel. Its so fun shooting 38s suppressed. Ive been reloading for about 15 years and have a bucket full of spent primers and bad brass. Im getting ready to finally melt it all down for stock for the mill and lathe. Cheers from Idaho.
Thank you. I just learned a ton in ten minutes.
@MakinSumthinFromNuthin
5 жыл бұрын
Thanks!, glad it helped!
Thank you - This was very informative. I need to cast a small part and i think this puts me on the right track 👍🏻
@MakinSumthinFromNuthin
Жыл бұрын
Cool!
Awesome, I'm just discovering metal casting and you are providing great information. You have another subscriber and my gratitude. People like you make KZread a great learning resource!
@MakinSumthinFromNuthin
6 жыл бұрын
Thanks for the very kind words Jim and glad you like what you see on my channel 😊
Great tutorial, very clear and informative for a learner like me.
@MakinSumthinFromNuthin
6 жыл бұрын
Thanks!, I appreciate ya 😊
I made my green sand by your instructions and am ready to do a melt and cast so thank you so much for sharing your skills. P.S. After saying "lets get this show on the road eh!" you automatically became an honorary Canadian!
@MakinSumthinFromNuthin
4 жыл бұрын
😊🤗🎉
Great video, this helps me create my random stuff and fills in my free time
@MakinSumthinFromNuthin
5 жыл бұрын
Thanks! :)