wow. This has helped me more than you'd imagine. Extremely underrated channel, and I understand that your videos aren't the highest quality, but that's not why I'm here. I'm here for the wonderful process and professional-looking result. Amazing job

@kursattoprak

10 ай бұрын

1111111111111111111😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊¹merhaba 😊😊😊😊😊😊🎉🎉🎉³

Amazing video bro. Just getting into this hobby myself. Thx!

thats the nicest finish on a casted part ive seen on youtube, nice job

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks, I thought I had made Nuthin...but it turned out to be Sumthin! :)

Nice work.

SURPRISE ENDING ON THIS ONE! :) Comment, Like & SUBSCRIBE!

I felt you failed but I too was surprised to see a perfect pour.

I had a lot of fun watching this video

I was watching the pour and I was thinking...OH no, it's fail......but man that casting came out excellent! great video

@MakinSumthinFromNuthin

6 жыл бұрын

I was more surprised than anyone! LOL

I am NEVER going to be happy until you got 20 neighbor kids hanging around helping and "larning" !!

Thankyou 😇🙏

Mui bien

I liked what you made!

Been following you for some time now. Of all the channels I follow for sand casting, yours is on my top list. Thanks a bunch for doing these videos! I've learned a lot from you.

@MakinSumthinFromNuthin

2 жыл бұрын

Thanks!

Kudos, Sir !

Beautiful work. This is the first video I have watched on you channel and already learned more then some of the other videos I have watched on other channels.

Thanks for your vids, getting into casting and this helped a lot

@MakinSumthinFromNuthin

6 жыл бұрын

Glad they helped, comsider subscribing! :)

Outstanding! Phillip Hall

Nice 🐱

@MakinSumthinFromNuthin

Жыл бұрын

Thanks!

@jdnotariano

Жыл бұрын

@@MakinSumthinFromNuthin I like your channel name. I just stared making aluminum ingots from a large supply of scrap I have. Learning to cast is something I am starting to think about….

@MakinSumthinFromNuthin

Жыл бұрын

@@jdnotariano Thats cool, Good luck & be safe!

best pour cam ever!

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks Junior! Consider Subscribing! :)

Great job I learned something from this.🐥

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks for Watching! :)

another good one, nicely done bud

@MakinSumthinFromNuthin

7 жыл бұрын

Much appreciated!

Pretty neat idea using molds! I need to give this a try once I move on from lost foam.

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks!, I think you will like green sand casting!

Nice Kitty!

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks John!....no vet bills as a bonus! :)

@Jsellers1965

7 жыл бұрын

Thats a good thing. LOL

My Ford Boy would be proud of you and your job.

@atheist45

4 жыл бұрын

It's actually Myford Boy, named after the English lathe manufacturer.

nicely done sir

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks John! :)

love the name

Good stuff. I made a belt buckle with that lost foam thing. came out great!

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks, I did a vid using that lost foam method....strange stuff...works good :)

very good

It's that sweet sweet hammer action

I just got my furnace last week,I’m loving it,great video

@MakinSumthinFromNuthin

4 жыл бұрын

Thanks!, have fun!

Amazing job on it, very informative too

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks for watching & the kinds words :)

@dirtybarnuts

7 жыл бұрын

I just started getting into this aluminum casting, I'm about to make my first foundry and I was wondering if I can get your professional opinion on weather to use the perlite/cement mix or the wool/100 lining? trying to make a nice and reliable foundry that can take some high heat too

@MakinSumthinFromNuthin

7 жыл бұрын

If just doing aluminum and wanna get off cheap, go with perlite/cement. If you plan on doing aluminum AND higher temp metals like copper, brass & cast iron go with wool. ITC 100 is optional. The latter is more expensive and has advantages...very light weight & longevity if properly cared for. Heats up much quicker as well....is just a matter of how much money ya wanna put into it :)

Nice casting sr

@MakinSumthinFromNuthin

7 жыл бұрын

Thank You! :)

With plaster casts, use a gentle amount of Pam to release the cast. You can use many layers of plaster, almost water, then thicker. Just let each layer harden before the next. Do not wait any longer for next pour.

Good Work

@MakinSumthinFromNuthin

3 жыл бұрын

Thanks for the visit

you are awsome love you'r vids

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks friend!, consider subscribing! :)

@abgsupport2716

7 жыл бұрын

i have i love watching you'r vids giving me some great idea's

@MakinSumthinFromNuthin

7 жыл бұрын

I dont get notified of your comments...check your settings

good work

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks! I have more casting videos if interested :) Consider subscribing! 👍🏼

A simple riser made from a metal cylinder and sand would give you a reservoir of molten metal and ensure a positive pressure fill of your mould.

@MakinSumthinFromNuthin

7 жыл бұрын

Absolutely. That entire mold was an experiment and not normally how I would ram one up and gate it. My other vids show how I usually do it

@andrewwilson8317

7 жыл бұрын

Makin Sumthin From Nuthin but it has to be said you achieved very pleasing results from some simple and quite cheap equipment. If this does not inspire others to have a go then nothing will. Really liking your channel mate

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks Andrew, spending $$ on expensive equipment gives me a rash. LOL!

@andrewwilson8317

7 жыл бұрын

Makin Sumthin From Nuthin there is no correlation between great results and money spent if you have not practiced and learned the skills. Cheap home made kit and good skills will always surpass expensive kit and poor skills! No substitute for getting out there and having a go and learn from your mistakes. The best thing is nearly all the materials can be used over and over again, what you got to loose?

@MakinSumthinFromNuthin

7 жыл бұрын

Well said!, glad you like the channel! :)

My theory is that the molten material reaching the air vent started to cool down to a point it stopped the flow from the material getting thru in the other side of the mold. Or maybe some impurities accumulating in that particular part of the volume. A very lucky "failed" pouring, as you said :V

Thank you for the direct and to the point video. My only question is what is green sand, where can I get it and would play sand work?

Lovely casting. I was wondering why you left runner so small and why not a cup on the runner. But your were so right to keep pouring I'm always amazed at how sometimes it starts to run again. Thanks again , great video.

@MakinSumthinFromNuthin

7 жыл бұрын

That whole gating system was just an experiment on my part to try different stuff. I was gonna pour until something happened!! LOL :) Thx for watchin!

You mentioned in the video that there is no flash on this mold. Is “flash” the rough texture that sometimes happens? Do you know what causes that?

Great video but I have a question that how long can we keep on using that burner or torch?I mean can we keep on igniting it for hours or do we need to give it a rest?it is dangerous to keep it on ignition for hours because it could get too hot or can we use it for as long as we want?

Thanks for sharing. My next question was going to be how you make the plaster cast I seen in some of your videos. Thanks

@MakinSumthinFromNuthin

6 жыл бұрын

I make plaster positives to use as casting patterns from cheap plastic plaster molds....they are available online

@suoppsdn9751

6 жыл бұрын

Thanks a lot

@MakinSumthinFromNuthin

6 жыл бұрын

Yup, I considered making a vacumm former

@MakinSumthinFromNuthin

6 жыл бұрын

Yep, they are pretty simple. I just dont have the ongoing need or room for one....nifty devices tho

@suoppsdn9751

6 жыл бұрын

Oh yeah Thanks Stephen Coyle. I have looked a a few homemade vacuum formers and even one big one made by Adam off the Mythbusters

That was really awesome!! Looks fantastic! Can you re use the sand?

@MakinSumthinFromNuthin

5 жыл бұрын

Totally reusable, see my video on making green sand :)

Working through failures is an essential element to learning to cast, I was casting Aluminum into a mold that was 1/8 thin, After making the necessary adjustments and getting it to cast properly I read not to try a casting this thin as it will not fill out, HA! BS it won't.

@MakinSumthinFromNuthin

3 жыл бұрын

Nice Job! Always a way!

Can you explain in detail for us "slow" and beginners what you did to slow down the metal velocity?

What do you mix with the green sand to make it stick to itself? Water?

Ahh,getting sidetracked again from the propane forge lol..Awesome result.

@MakinSumthinFromNuthin

7 жыл бұрын

Ha, Getting from point A to point B isnt always a straight line! :)

@MakinSumthinFromNuthin

7 жыл бұрын

LMAO!! Maybe you should just stick around here! No butt plugs for my 4,000+ subscribers! :)

@richyearle007

7 жыл бұрын

Yep,i think you are right although i think i have had enough of youtube for one day.You have some great stuff on your channel so i'll be back...Cheers

@williamgreene4834

6 жыл бұрын

It's not a forge, it's a foundry furnace. You don't melt stuff in a forge, you melt it in a furnace.

I believe it's time to play some lottery.... you're a lucky guy...😉

@MakinSumthinFromNuthin

4 жыл бұрын

LOL!! Thanks! 😊

First of all, great video, congrats on a successful cast... I've watched a lot of yours & others videos, and I am confused by something... Shouldn't you have put that ring around the sprue, instead of the vent? To let the pour pool up over it?

@MakinSumthinFromNuthin

7 жыл бұрын

The ring is something new I was trying to contain overflow from vent so it doesnt burn the flask if I poured too much in and it started running towards flask. I generally use a pouring cup for sprue as in other videos but didnt on this one. Was trying lotsa new stuff on this cast. A pouring cup woulda avoided confusion in this case :)

@ryanbarker5217

7 жыл бұрын

...cuz i thought the point of the cup was to create pressure, forcing the metal to the edges of the mould....

@skyklan47

2 жыл бұрын

that's what I said and I don't know what those things are but I know what you talking about and I'm new but it doesn't feel like it for some reason.

I like the video and first time seeing this processing. I wish I knew more of the words you were using. Kinda for a newbie who don't understand the language of the trade. Maybe you could explain the sand types and how you made the wood bracket and so on. This video would be more for the intermediate doer. Still non the less thank you.

@MakinSumthinFromNuthin

5 жыл бұрын

Watch my video called: SAND CASTING LESSON FOR BEGINNERS, you will find it helpful :)

Thanks for posting. Will you be doing a 6 pack abs video?

@MakinSumthinFromNuthin

4 жыл бұрын

I already did

What kind of powder did you sprinkle on top of that?can we use flour instead?

That would make me third. Anyway, great instructional video MSFN. Those cheap kids/craft plaster molds are a good way to explore more complicated patterns. With regard to your pour puzzle, check out myfordboy's casting videos as he uses greensand filled tin cans to act as aluminium reservoirs, provide head pressure, and act as pouring funnels. Might be a tip worth exploring to improve the consistency of your casting pours. I liked that you explained why you wanted to slow the velocity of the molten metal, and I have been thinking that it would be worthwhile to create a sprue and swirl cup pattern to be included in the ram up. It would provide a consistent means of slowing down the pour velocity as well as catching any debris flowing in the aluminium as well as reduce the risk of dislodged sand flowing in to the casting. A professional casting video I have seen includes all the gating and reservoirs as part of the pattern for the ram up as you wouldnt want any sand included in your turbocharger housing let alone air bubbles.

@MakinSumthinFromNuthin

7 жыл бұрын

I generally use a pouring cup as in myfordboy's vids but I thought that might be contributing to the problem with the velocity so tried some new stuff on this one. The mold completely filled with no head pressure at all with no shrinkage on the casting. Luckygen has put up vids about the need for extended risers and head pressure. I have watched a number of vids from both creators....Both them fellas are fine foundrymen :)

Can you mold mechanical spur gear next time?.

@MakinSumthinFromNuthin

2 ай бұрын

In my opinion gears are easier to purchase than cast

beautiful work How much sand is in the mixture with the bentonite? Any brand of cat litter will do? Thank you

@MakinSumthinFromNuthin

4 жыл бұрын

I have a video on how to make the sand if you want more info on it.

I saw in 1 of your other vids that you melted a hole in your black plastic mixing tub. Have you started to put some sand in its replacement before you break your sand molds now? You got lucky with this pouring. Yay!

@MakinSumthinFromNuthin

6 жыл бұрын

Ha!.... I loved that black tub! 😖😂

@ronyerke9250

6 жыл бұрын

Our cat uses 1 of those tubs as a litter box. I think she appreciates the extra space because she hasn't done her business on the floor next to this one like she did with the old smaller one. Fortunately, we have another to use for our projects.

@MakinSumthinFromNuthin

6 жыл бұрын

I need another one 😊

This guy reminds me of my dad XD

@MakinSumthinFromNuthin

5 жыл бұрын

XD

Great videos, Every bit as as oil based sand if not better, Do you use flux ? Thanks again great job,

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks!, I tried a baking soda flux once.....saw no improvement on cast quality. I melt it, skim it and pour it nowadays....I am not making parts to go into space rockets. The aluminum seems fine as is :)

@williamgreene4834

6 жыл бұрын

Makin Sumthin From Nuthin A great flux for aluminum is pool chlorinating tablets. Crush them roll some up in some paper and shove it to the bottom. Don't breath it and I didn't tell you this it's roughly the same as foundry flux. it gives off chlorine which combines with hydrogen ( which is the real problem in alum. casting) then bubbles it off. you didn't get that from me.

Lovely casting...Maybe you needed to open up the downsprue a little to make a good target to pour into, and also use slightly bigger ingates. No problem though it turned out fine.

@MakinSumthinFromNuthin

5 жыл бұрын

Thanks Kevin!

That's a great casting. What is your green sand made from? Proper bentonite or powdered kitty litter?

@MakinSumthinFromNuthin

7 жыл бұрын

TY...Here is how I made it kzread.info/dash/bejne/ZKZ1s9qwZrucpcY.html

@Loopyengineeringco

7 жыл бұрын

Brilliant, thanks!

@MakinSumthinFromNuthin

7 жыл бұрын

:)

Can you make a video about making an aluminum mold? I would even be willing to pay for having a mold made out of a small sculpture

Why is the water yellow? U live in flint Michigan??

Would really like to See a Skidoo 277F Snowmobile or Rotax 277UL Ultralight Head done. 377UL/447UL Heads, 503UL Heads.

@MakinSumthinFromNuthin

2 жыл бұрын

I dont cast engine components

Do you know any substitute material for plaster of paris? It seems like it's not available here.

@MakinSumthinFromNuthin

2 жыл бұрын

I sure dont. its common in the US

This is pretty old at this point but where did you get those tongs? It would make pouring much easier to use something like that

@MakinSumthinFromNuthin

3 жыл бұрын

I made them

Is there any way to get the dross out of the bottom of the crucible? I've made two crucibles now and each lasted two melts before it became unusable with all that stuff stuck at the bottom (I made the crucibles by welding a bottom onto a 4 inch diameter steel pipe)

@MakinSumthinFromNuthin

7 жыл бұрын

Some advice I can give you is to make a scraping tool and immediately after pouring your metal scrape out what remains at the bottom while the dross left in the bottom is still workable. Once it cools its not going anywhere. Another suggestion is using the scraper while the crucible is still in the furnace and full of molten metal....gently work the entire bottom to free up that dross so it floats to the top to join the rest of the slag, then skim and pour.

@Shipslaw

7 жыл бұрын

Thanks MFSN! Unfortunately it's all cooled down and, as you say, going nowhere. I'm thinking of making crucibles with a screw-on bottom. At least then you can ran the stuff through (as long as the thread is on the outside, that is). Also, I bought some borax, maybe adding that would cause the slag or dross to be more 'floaty', making it easier to skim off. Your videos are great.

@MakinSumthinFromNuthin

7 жыл бұрын

Glad you like them :) I would be concerned about a threaded crucible due to "leakage" potential. Give my method a shot on next melt and let me know the results. The scraper doesnt have to be anything fancy as long as its made of steel and not aluminum. LOL

Is this kitty still on sale? If it's not too expensive I would like to have it. I'm studying engineering and tomorrow have an exam about casting and other stuff and sick of studies I found you vid great 😻

@MakinSumthinFromNuthin

7 жыл бұрын

Thanks Nicole, glad you enjoyed the vid! Yes, Its still available, You are the 1st to inquire about it. My email address is in the video description if you want to contact me about the kitty cat :)

Logic to me would be to use a metal funnel to make the shape in sand. You therefore have a wider aperture to pour in the liquid Ali...

@MakinSumthinFromNuthin

7 жыл бұрын

I actually do just that in all my other castings, this mold setup was totally just experiment trying a different technique

is it possible to sand cast deer antlers? Cold you do a video on that?

@MakinSumthinFromNuthin

7 жыл бұрын

Only using the lost foam method of casting could that be done as there is no way to remove the antlers from the sand without destroying the sand mold. I do have two videos of casting a deer plaque if ya wanna check them out :) Part1: kzread.info/dash/bejne/q6dttpmemM-cdps.html Part2: kzread.info/dash/bejne/m5V1269pcrezgNI.html

@shocker7100

7 жыл бұрын

thank you for the reply. I was trying to do a set of antlers that my uncle shot along time ago to be put at his head stone. He passed away a year ago and was going to do this for Memorial Day.

@MakinSumthinFromNuthin

7 жыл бұрын

I am very sorry to hear that, sorry I couldnt help :(

@shocker7100

7 жыл бұрын

thank you for your time and the reply. Your videos are very helpful.

@urjnlegend

6 жыл бұрын

shocker7100 if you want, use silicone or alaginate to do a 1 piece mold of the antlers, you can find a medium to then fill the cavity with. they have foam you pour (i hear it doesnt work well with aluminium casting, polyurathane foam that is), you can possibly use wax, which most likely wont work. worst case scenario, you melt out the polyuruthane foam, to hollow the sand mold, then pour aluminium, or buy a good castong resin from smooth-on and that will work, it just wont be aluminium

When is the Green sand mix making video going to be out? Was about a month ago or more when you said you were going to post it :)

@MakinSumthinFromNuthin

7 жыл бұрын

It's been out....for about a month+. Check my recent uploads Mike. That one has been pretty popular :)

I’ve been looking as best I can and can’t find where you find the patterns you cast. If you could tell me that would be appreciated😁

@MakinSumthinFromNuthin

4 жыл бұрын

I bought cheap plastic plaster molds from the internet and made plaster patterns for casting from them. Google it

@skyklan47

2 жыл бұрын

I thought he said that he designed that one. or maybe that was in a different video that I was watching trying to get the same information.

I would have put the sprue cup over the larger hole & poured there. But it turned out fine. Go get a Lottery ticket.

@MakinSumthinFromNuthin

7 жыл бұрын

Thats what I normally do...that entire mold set up was just an experiment trying out new stuff but worked out in the end (whew) LOL :)

In some aluminum casting videos i observed, the poring metal looked light red in colour, unlike in your video which is in shiny silver colour.. What is the difference? Is my observation wrong? I'm new to casting, please let me know.

@MakinSumthinFromNuthin

3 жыл бұрын

Camera settings cause it to look red. It is always a silver color

Video starts at 0:34

@MakinSumthinFromNuthin

3 жыл бұрын

Awesome, thanks!

Didn't flip the drag? How'd ya cope with that?

@MakinSumthinFromNuthin

7 жыл бұрын

Ha! Casting Humor...nice! 👍🏼

Ok uhm 2 more question: 1. How can u make aluminum stronger? 2. Does melting any aluminum ingot leave anymore slag or just 100% clean reusable molten liquid aluminum?

@MakinSumthinFromNuthin

7 жыл бұрын

I wont pretend to know the answer to question #1, I am not a metallurgist. Making an aluminum alloy using multiple metals would be my best guess on making it stronger. there are ways to harden and temper aluminum but not an expert on the process. To question#2, you will always have slag, but much less using previously melted ingots than you would get melting a bunch of misc scrap aluminum for the first time. Hope that helps, thanks for watching....good questions :)

@novaforge5832

4 жыл бұрын

I can Answer the second question, I have melted aluminum a fair bit, and when dealing with slag you have to separate it from the aluminum. the slag will often always float to the top making it rather easy to clean out while its still molten. However, if you want to minimize the slag all together then i recommend tin foil which is actually just aluminum. hope this helps

Hey have you ever castes Bronze?

@MakinSumthinFromNuthin

7 жыл бұрын

I Have cast brass before....i havent put up a video showing it done....yet! :) Bronze and Brass are not the same however

@samhansen7303

7 жыл бұрын

+Makin Sumthin From Nuthin Yeah I was just going to make a sword out of Bronze for my Grandpa and I was wondering if you knew the ratios of Copper to Tin.

@MakinSumthinFromNuthin

7 жыл бұрын

The recipe (ratios) can be found online if you google it. A quick google search states: Bronze is an alloy consisting primarily of copper, commonly with about 12% tin and often with the addition of other metals (such as aluminium, manganese, nickel or zinc) and sometimes non-metals or metalloids such as arsenic, phosphorus or silicon. ___ There are a variety of bronzes so you will have to see whats best for your specific application

Hi. May I know what grade of the aluminum using for this casting process?

@MakinSumthinFromNuthin

3 жыл бұрын

Cast aluminum, extruded, beer cans, whatever I come across for free :-)

how do you make sand stay in place ?

@MakinSumthinFromNuthin

7 жыл бұрын

The sand has clay in it and it packs down nice. I have a video on how to make it here kzread.info/dash/bejne/ZKZ1s9qwZrucpcY.html

@matic1265

7 жыл бұрын

ohhh thank you :D you earnd a sub :D

@MakinSumthinFromNuthin

7 жыл бұрын

welcome aboard! :)

You probably could sell just the plaster cast also, so people could paint them and use them as whatnots

@MakinSumthinFromNuthin

6 жыл бұрын

Thats mainly what the plaster casts are used for. They make good patterns tho :)

when making my furnace how much space should be between my crucible and the walls

@nathansaier8673

7 жыл бұрын

oh and what were you using as crucible

@nathansaier8673

7 жыл бұрын

+Nathan Saier and can I get the dimensions if possible

@nathansaier8673

7 жыл бұрын

thank you

@MakinSumthinFromNuthin

7 жыл бұрын

A minimum of 1" or so Nathan to allow the flames and heat to circle the crucible. A 2" - 2.5" space gives you the xtra room for a larger crucible down the road. The furnace interior dimensions cant be too large unless you have a well designed burner. Those measurements are from the "side of the crucible to the furnace wall"

@MakinSumthinFromNuthin

7 жыл бұрын

I make my crucibles from steel fire extinguishers. Here is a video I did on how I make them kzread.info/dash/bejne/hIGLx9qPgKzWldI.html

i am looking for a place where i can buy the plastic molds

@MakinSumthinFromNuthin

7 жыл бұрын

I forgot where I got mine from but they are available online...just search for plaster molds :)

@kettlybelfort2960

7 жыл бұрын

THANKS!

@MakinSumthinFromNuthin

7 жыл бұрын

U R Welcome, thanks again for watching my channel! :)

Hey not to say first, but First

@MakinSumthinFromNuthin

7 жыл бұрын

SECOND!

dude the can is to contain the fluid, try to pour it on the can side and wait for the aluminuim to go out the other side, that way you leave some material for when it shrinks

@MakinSumthinFromNuthin

7 жыл бұрын

The entire mold was an experiment, the ring was just just to contain the overflow so it didnt burn the flask if it was excessive. I normally do a pouring cup to pour into if ya wanna check one of my other videos...but I know what you are saying...this pour was kinda a disaster but the casting turned out good...LOL :)

@santiagocondemorales5567

7 жыл бұрын

i was trying to be nice, im watchin alot of videos on the subject, im planning on making 1, the best tip so far is to dip the styrofoam in plaster then pour the aluminuim. lol wtf

@MakinSumthinFromNuthin

7 жыл бұрын

LOL, keep me posted. Hint, dont use crappy styrofoam :)

Itu pasir apa yang di gua akan dan campuran apa saya ingin membuat ya juga pliss

@MakinSumthinFromNuthin

10 ай бұрын

kzread.info/dash/bejne/ZKZ1s9qwZrucpcY.html

it looks like you put the riser on your vent pipe.

@MakinSumthinFromNuthin

7 жыл бұрын

That entire mold was just an experiment, worked out in the end tho :)

Can you reuse your green sand?

@MakinSumthinFromNuthin

3 жыл бұрын

yes, can be used year after year. sometimes you need to add more clay. I have a video on making the sand

What is your sand thank you

@MakinSumthinFromNuthin

Жыл бұрын

I made it: kzread.info/dash/bejne/ZKZ1s9qwZrucpcY.html

@user-vg2tr4bc6k

Жыл бұрын

@@MakinSumthinFromNuthin thank you

Why didn't it come out the other side?

Why didn't the molten Aluminum come out of the vent?

@MakinSumthinFromNuthin

6 жыл бұрын

Nothing went properly on this one....I tried a screwy mold & gating system on this one as an experiment. I didnt think the casting would turn out well after the pour....got lucky I guess 😊

@jimbasler1054

6 жыл бұрын

Turned out great.......

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks!! ~ Richard

Pouring rate seems to be an important factor here.

I HAVE TO MAKE A QUESTION ABOUT THE ALUMINUM. THERE ARE VARIOUS TYPES OF ALUMINUM. WHICH ITEMS ARE MADE WITH THE MOST PURE ALUMINUM?-

@MakinSumthinFromNuthin

4 жыл бұрын

If you at all can use aluminum that has been previously casted and avoid extruded aluminum and soda cans. Lawn mower engines, many car parts...etc is a good source of furnace food

Your riser vent was so small it probably solidified the aluminum before it could reach the surface.

@MakinSumthinFromNuthin

6 жыл бұрын

I did a lot of experimenting with that mold, casting turned out good after all the trubbles tho 😊

@Larry1942Will

6 жыл бұрын

All that counts.

Why do you need to slow down the metal velocity?

@MakinSumthinFromNuthin

Жыл бұрын

it was washing out the fine details in the casting as the metal entered

@myMotoring

Жыл бұрын

@@MakinSumthinFromNuthin I see. Thanks for the explanation

Some ass hole keeps taking my hood ornament how could I cast one to so they take a cheap one.

@MakinSumthinFromNuthin

7 жыл бұрын

I would have to see it to be able to determine if it can be cast in aluminum. Nothing worse than a thief! 😡

@finemyu69

7 жыл бұрын

Makin Sumthin From Nuthin it's a Mack truck you can google mack truck hood ornament and see them.

@MakinSumthinFromNuthin

7 жыл бұрын

Damnnnn, they are over $100 to replace. I couldnt make one using sandcasting but I would make friends with someone who has a 3D printer, have a few made of plastic and spray paint them silver :)

@finemyu69

7 жыл бұрын

I know they do cost a lot and I have had 6 go missing so far I put a camera on my truck and it took one guy less then 30sec to get it off and gone. But cops got him. I'm tired of playing games with damn thief I'm looking into how to electrify it so I at least get a kick out of it and can start posting them lol. But thinks for your help.

@MakinSumthinFromNuthin

7 жыл бұрын

I would watch that video! :)

Why didn't he pour the metal into the ring in the first place? I thought the whole point of the ring was to help guide the metal into the hole.

@MakinSumthinFromNuthin

7 жыл бұрын

The hole the ring was around was just the vent. If you watch again how I made the sand mold you will see

@r8drs5

7 жыл бұрын

from other videos i agree with you, the ring is used as a funel

Too low temperature.

@MakinSumthinFromNuthin

6 жыл бұрын

Experimental ramming of mold was the major issue, metal was hot enough

it seem like you're pouring it into the wrong hole. I would have put it in the end that had a place for the excess to sit and wait for it to come out the other side. I don't think it was hot enough when you were pouring it. even though it worked out to your advantage, I think this could frustrate a newcomer.

You needed a small amount of aluminum