Why hiding the lcd removal section which is not so easy... i have remove several of them without breaking but this its not easy as it was shown...

Hello, could you plays state roughly at least the temperature of the heat flow to soften adhesive please?

Which temperatur do you use with the heat gun?

Could you please make one about the ir blaster replacement on the note 4 please

@sergeicastaneda

9 жыл бұрын

Thank you you're awesome guys

Thank you for this video! Without you sir, the discusting customer service at Samsung and the awful repair peopl at ANOVO would be laughing all over their idiotic faces. They are the most useless bunch of C***s I've ever come across and they demanded £156 to fix the USB board on my phone which melted (Samsungs fault for faulty parts) - When I said no to them they simply threw the phone back together (to ANOVO engineers this means breaking the home button and sending it back with the screen hanging off) I called them several times each time I was told they would get back to me or the person who deals with that is away - BULLPOO. So yes thanks to amazon your video and only spending £12 my phone is fixed :) I feel sorry for anybody who actually paid them. Much Love xxx

@Fixez

8 жыл бұрын

+Liam Goodwin We're glad to hear you enjoyed our video, we appreciate all the support. It's unfortunate to hear about your issues with Samsung.

so I took my note 4 apart and replaced the charging port.. no issues really.. after putting it back together the screen sort of protrudes from the side bumpers a bit and I can't get it to stay flush, and the s pen no longer works. any idea why? any help is appreciated

@Fixez

8 жыл бұрын

+DrWarclouds36 If the adhesive used it to thick or the old adhesive wasn't completely removed the display may sit proud of the frame. Make sure the s-pen sensor connection is fully seated, and inspect the sensor and ribbon for possible damage.

My microphone on the bottom is very very low. when i turn on speaker people understand me cause the mic on top is active. Any optiin to solve that issue or does i have to change the mics ?

@encze9895

7 жыл бұрын

Have you repaired thia problem? I have this same... :/

Haven't been able to do a damn thing to separate the adhesive.

my microphone (iheve a note 4) isn't working any Help please I can't do that ... (and I can't listen my videos too) ❤ the guys 💕

@Fixez

7 жыл бұрын

+Hninou Hanae Replacing the dock port should resolve the microphone issue. If you don't feel comfortable doing the repair yourself we recommend finding a reputable local service center. Thanks for the comment. Hope this helps.

Can the adhesive be reused or not?

@Fixez

8 жыл бұрын

+Brad Urban It's recommended to use new adhesive. However, you may be able to on the dock port itself.

@Check_This_Out188

8 жыл бұрын

+Fixez.com and what adhesive should be used? and how much of it? and were exactly?

@Fixez

8 жыл бұрын

Any standard adhesive would work. Normally the new dock port has adhesive on it pre-installed. If not, you can use item number 5-0021 www.fixez.com/adhesive-strips and use just enough to keep the unit intact.

@ady18206

7 жыл бұрын

Fixez.com

lol, yeah that screen was glued in, load of bollocks

@Fixez

8 жыл бұрын

+chrisfowler20 The OEM adhesive is on there well. Take your time during this process. Overall, you should be able to remove the screen without causing damages.

@CandyXVI

8 жыл бұрын

Yeah, this video does not adequately show the screen removal.