Seriously THANK YOU!!! I was about to lose my mind.

Thank you so much this is extremely helpful, I too have spent 20minutes struggling to work out how to release the pipe without success. I respect you for not only working out how to separate the pipe but also to have the time to post it for mere ordinary folk such as me. THANK YOU.

Brother... THAAAAAANKKYOU!!!!!!! THIS IS WHAT KZread IS FOR!!!!!!!... you saved me who knows how long...

Thank you, saved me time and frustration. 45 seconds later and I’m done.

THANK YOU!! I spent the last 15 minutes frustrated over this "simple" disconnect, and I knew it had to be something easy that I was missing!!

That was so helpful- you’re so considerate to have put this video up. Thank you.

Thank god for videos like these, just helped my mom out with this

Thank you fir sharing! It took us 20 min to figure it out too!

Well my good man, I followed your exact instructions and how to disconnect this line and it's still would not disconnect no matter what we tried and we tried and did not succeed. I have done other fridges before with similar connections but this one would not disconnect and I do not know why I tried everything and did not succeed but thank you for posting this video

Thank you very much. I had a heck of a time trying to get the connection loose until I watched this.

A thousand thank yous!!!!! You saved us from a very frustrating task.

Thank you! (This was frustrating. Even the manual didn't give good instructions.) If your colors don't match his (mine was red instead of grey), the tube that disconnects is connected to the fridge (not the door).

I cant thank you enough. This saved my sanity today as we desperately tried to figure out how to get the door off. Thank you!!!!!!!

your video has not enough love for the humongous support that you share

Thank you. I almost killed the connection trying to figure this out!

Thank you. I tried for a few minutes and thought better and found your video in a minute. FYI mine had a red cap protecting the grey sleeve. I used my fingernail to pry it to the side.

Appreciate the video and saving me 20 minutes figuring it out

I wish everyone made videos this straight forward.

LOL AWESOME !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you for taking the time. What a night mare it was lol

Oh my goodness I can't thank you enough! Cheers

Thanks so much for your help I appreciate

So simple but so helpful many thanks for this

Very helpful thx! Was studying it and knew it couldn’t be that hard, but couldn’t figure it out. It’s like a Chinese yo-yo.

Perfect! Thanks man! I was about 5 minutes away from doing some serious damage...

Thank you so much you made my life easier today I really appreciate it

Thank you sooooooo much!! We were fighting with ours. You’re the real MVP!

very helpful! thanks so much for taking the time to help others!

Saved me 30mins. Thanks

Thank you this littarally stopped me moving for about 4 hours

So helpful and easy - thanks!

Thank you brother. Just blew 5 min tinkering, then youtube

Perfect, thank you!

Thank you!!!!!!

Thank you brother!

Thank you so much. Very helpful.

Appreciate this! Thank you

Perfect for what I needed. Thanks!

Gracias! Ya no sabía cómo más hacer… en serio que estaba a punto de devolver la heladera

Perfect video. Thanks so much!

Thank you for making this!

Very helpful! Thank you!

Just like a sharkbite push fitting.. thank you sir!

This just helped us out of a spot. Thanks so much!

THANK YOU WORKS GREAT VIDEO

Wow I was racking my brain till I saw this video then it took me 2 seconds thank you so much...👍

Thank you I needed that

Thank you!!!! From the bottom of my heart!!! I was going bananas. I was very close to just cut it out 🙈

Thanks. Super helpful.

Thanks very helpful 👍👍

Thank you !!!!!! Samsung has NO CLUE!!!!!!

Thanks for posting!😊

Wow. You done good sir. Ty.

A BIG shot out to you my dude!!!

Thank you! I was about to break the wire!

Thank you for posting.

Thank you so much so easy

mate, fantastic thank you!

Thank you, finally some common sense

Thank god for your video!

Thank you!

A+

Many many thanks

OMG, THANK YOU!!!!!

Thank Youuuuuuuu!!!!!!!!!

Thank you.

Thank you so much !!!

Many Thanks. You saved me from lots of cussing! lol

Thank you

Thank you so very much. 👍

Thanks bro!

Lifesaver!

Thank you very much!

You’re awesome

Actually, you just push in on the center gray thing on the other side and it pops apart. No tools needed. To reattach, just push them together. Just installed my Samsung fridge last week and had to remove the doors to get it in the house.

@DRRead2007

3 жыл бұрын

You must have stronger fingers than me. I couldn't compress the fitting without using something metal that slipped along the tube. Didn't have to be a tool, but it's what I had handy.

@AntaresMaximus

Жыл бұрын

This should be the top comment. The pliers were tearing up the plastic tubes, pushed in the grey part with a screwdriver and it took no force at all

Thx bro!

Something so easy, but they make it so difficult😂

Thank you!!

Coming in clutch at the last minute 😅

🙏

THANK YOU

What KZread is really meant for

🙏🏾

Does anyone know what part that is that connects the two diff ent types of line?

It would have been nice to show where the line is located.

If your connection does not look exactly like this then beware! The kind of connection I was trying to release had a thin 'collar' around the hose right where it disappears into the connector. I mashed it up pretty bad trying this method, in the end it turns out that the collar actually pushes back toward the connector (only by maybe 1mm or 1.5mm) and that is enough to allow the hose to slide out.

@phoquenut

Жыл бұрын

I'm sorry this happened. My collar pushes back in as well. The pliers are not intended to grip the tube or collar, just slide the open part along the tube to apply even pressure to top and bottom of the collar to push it back in. If you have a small enough key wrench, it would do the same thing.

What’s name off that construction

Hey man there's a wire next to that, that I don't know where it goes i used this video to take it apart 6months later I can't I ut it together

You just save my door . The Dam fridge didn't fit

Was trying for 30 mins i was okay youtube help me lol

I must be the only one who can’t figure out even with this video.

@phoquenut

Ай бұрын

The trick is to slide the gray part on the right back into the white body, while pulling gently on the black tube. You wont be able to use your fingers to push the gray part in, so you need something that can slide along the black tube without pinching it. A tiny key wrench might also work, but the hole on my pliers was perfect for me. Hope that helps.

Not what you’re suppose to do. Use your fingers. Push the the hose in while also pushing plastic hose clamps, then pull hose out.

@phoquenut

15 күн бұрын

Literally what I did, except my fingers were too big to grip it, so I used a tool because I have opposable thumbs and can.

I squeezed mine and it just shattered and exploded lol

BROTHER 🫵🤘ROCK

Not helpful. Need more help

I made the mistake of calling Samsung for help with this. Now, I have a broken coupler and have to find a new one. But at least I know what to do next time!

Thank you

Thank you!

Thank you!!!!

Thank you!

Thank you!!!!