If u have the new model there are small differences that make it a bigger pain The main one is there are screws on the bottom the other is on that bracket that he takes out at the 7:10 mark there are 4 screws that make it such a pain. but the video is great thanks.

@michaelyang0720

2 жыл бұрын

that's the case for DV45H7200EW, yeah, it's the major pain comparing to the rest. thanks for the great video!

Same dryer, same issue, 100 other videos don't explain as well as this. Plus, this is hilarious. "Samsoooong making these in North Korea?" Classic. Thanks for saving me a lot of time and money.

Excellent video started a Saturday with a broken dryer and up fixing it and in the process had a few beer and no stress! Really appreciate it! So easy to follow! Thanks!

This video fixed my dryer and listening to it while going through this frustrating process made me laugh a decent amount. I can’t thank you enough

This was hilarious! Thanks so much for simplifying the process so that even this mom could figure it out!

The best video I have found to DIY anything. Good **** man!

I never knew I needed this in my repair videos until now. I hope that in the future all of your items and appliances that we both have break, so that I can watch your videos on repairing them.

@SebastianBalos

5 жыл бұрын

SpartanScytale lol. Please subscribe!

I googled my dryer model number and found this video first. You are hilarious and helpful at the same time. Thank you for the inspiration.

This video saved me ~$150-200 in repairs. Following your instructions I was able to determine the heating coil was bad, ordered a new one off Amazon for $30, and 2 days later have a working dryer. Cheers!

This is my go to video for taking this pos apart, neverending. Thanks again

Thank you!!! I could have never gotten this changed without your video!! Out of all the video's to choose from, you got me with the two beer rating. A sense of humor always helps!

Excellent walk-through. Saved $300 and did it in two days (as had to wait for Amazon to deliver the heating coil). One thing - my dryer had the red wire connected to the top coil lead vs. the bottom per your example. Not sure if it makes a difference but kept it like I found it and dryer works like a charm. Thanks tons!!!!

Cheers sir! Just followed this for my dryer, great job! Beer is on me.

Thanks so much - bought the kit, ended up using the old casing because the new one is not formed right - but we are back in business - heard a few of the same 4-letter words - used lots of bandaids - sheet metal is sharp. Your instructions were right on the money. We're back in business - thanks again.

👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼 a beer to calm me down. My Man. Thank you sir!!!!!

Awesome Video! My wife and I repaired our dryer in under 2 hours. Thank You!

My wife showed me this vid and said my dryer isnt working and holy crap you were right! Coil went bad and I had a part and fixed it with in 2 days with this video. Thank you for the help and the advise on the beer! Definitely necessary for this project. Only thing I would add is in mine, I had to loosen the lower 3 screws on the lower front bracket for the white front panel in oder to seperate it from the main body. Thank you for the help great vid!!!!!!!!!!

A million thanks for a superb video. I have the same dryer model and you saved me a ton of money. Only hassle I found was that the base that supports the heating element has two screws in addition to the metal tabs. I used a short stubby philips to get them out. Thanks again.

Appreciate it brother. Helped me fix my dryer. Dont know why the stock coil only lasts 2 years but that's how long mine lasted too and I have the same exact dryer.

@craigboisseau8314

3 жыл бұрын

My first replacement coil only lasted a year and a half and here I am refreshing myself by watching the same dam video before I get the tool out. I'm looking for a whole new dryer in about a year from now.

Can't thank you enough bro. This vid helped me fix my dryer in 2 days, and my dryer was only 3 years old too. Thanks a ton!

Great video. Thanks for posting this. Super helpful to have the resistance test shown as well as it showed me exactly what to do. Just replaced my heater coil. Finished in less than 45 mins from start to finish. Saved me a ton of cash as opposed to calling a repair guy.

Thank you so much! You did a great job with the video, easy to follow along with and saved my dryer!

Thanks for posting, solid instruction and my dryer is working. Sidebar - I had a hard time puling the plug out of the door switch and ended up stupidly opening the casing of the door switch and then messed up the terminals inside and had to buy a new door switch for $25. Make sure you pull this plug out straight and firmly.

The BEST diy video I’ve ever watched. I feel like you made this just for me

One of the best videos on KZread! Fixed my dryer and everything! I actually referenced the video twice because my coil failed 2 times. This dryer is a piece of shit.

Good video! I have three same dryer and I am fixing the same problem for the second time. It's been about 2yrs since it went out last time so this was a good reminder.

Thanks for the video...mine was showing error code HE so I ordered a new heating element so your step by step was awesome 👍🏼...drying clothes now and waiting to see if it’s fixed 🤞🏼

Great video. I called for repairs, thinking I was under warranty. Turns out they wanted $350 to fix it. I got the part for $30 with shipping and had it done 6 days sooner than they could show up. Couple of things I found. The top pops up from the front with out having to undo the control housing. The wire to the door sensor pulls from plastic clips letting you remove the door further. Also, the metal tabs on the top door attachment bend up easily with a screw driver without all the banging. You made getting the vent trunk in place look too easy. That was my biggest fight. Thank you for the continuity checks. That was extremely helpful. Over all, it was a four beer for me.

Awesome video. I just fixed my dryer thanks for your help!

I took the old coils out and replaced that sock smoker with a thicker gauge salvaged steal spring. My clothes are dry in half the time now. Thanks a ton man!!

@SebastianBalos

5 жыл бұрын

Nathan Chappell cheers to that!!

Was cruising along until I tried to take the front off - it wasn't moving at all. Didn't want to admit it was because I am a girl so I fought with it for a good 30 minutes before tipping the dryer back and noticing that i had 3 screws underneath holding on some trim on the front. So if you are fighting with the front you might check to see if you have a black trim thingy on the bottom, once you remove that you are back in business.

@k11keeper

5 жыл бұрын

Thanks I’m running into the same issue currently

Thanks! Spent Aprox $30 on Amazon and fixed the dryer with this video

Worked like a charm. Ordered the part overnight and was done within an hour. Cheers.

Very well done! This video is step by step awesome!

Great Video. Followed everything except taking off the front panel. I removed the front 3 screws and it wouldn't come off very easy. I put those back in and removed the back 3 screws and it worked GREAT. $20 for the element and we are GOOD AS NEW. Thanks!

Best repair video ever ! Seriously, after I stopped laughing, it was very informative. Just what I needed to know to fix mine.

Great Video....felt like I was watching myself do a home repair project lol....thanks again

Very helpful. I followed this video step by step and was able to fix my dryer. Saved me $$$. Thank you!

Awesome. Followed step by step... best one out there. Thanks, man.

Single mom of 2, recently windowed. This video saved me sooo much was able to do it myself!! Can not thank you enough and I am obsessed with your cursing mario 'bleep' outs! 10 outta 10!

Dude, great post! Followed it to a T (even had a beer and a few F-Bombs) and worked like a champ. In the end, wife is happy and guess that is why we do this $h*t. Thanks again!

This video is awesome! Thanks so much! Easy to follow instructions and entertaining. I fixed it and it works like a champ!

I haven't replaced one of these for over 10 years. Used to be pop the back off, swap the element, put the back on, and your were good to go. I would not have been able to replace the heating element without this video. Wouldn't have even occurred to me to take the front off and I doubt I would have been able to. Plus I love the swear words and Miller Lite is my favorite beer. Ill buy you a 12 pack with the money I saved. Great video

@SebastianBalos

3 жыл бұрын

lol, cheers!

Thank you so much bro!! I’m not a handy guy at all but you broke this down so good and helped a brother out.

You just saved me some $$!! Thanks for this video. It really guided me step by step to change out my bad heating coil. Excellent video!! 👍🏿👍🏿

Well done. Bonus, you gave me the idea to reconnect the dryer duct to the wall last. Thanks

Thank you so much. You saved us a lot of money. We have the exact same dryer as you! I just got it working.

OH MY GOD!!! THANK YOU SOOOO MUCH FOR MAKING THIS INSTRUCTION VIDEO MAN!!! YERRRSS IS THE VERY BEST VIDEO THAT I'VE SEEN SO FAR REGARDING REPLACING THE HEATING ELEMENT ON MY SAMSUNG DRYER, SO I REALLY DO APPRECIATE IT....SIMPLY BECAUSE IT WAS THE MOST CLEAR AND CONCISE VIDEO AVAILABLE... ANYWAYZZZ, I WAS ABLE TO ACCOMPLISHED MY MISSION AND GET IT DONE RIGHT THE FIRST TIME DUDE!!! SO THANK YOU!!!

I fixed mine, thanks brother, badass video

Thank you so much just had to replace the heating element on mine and I have to say your video was the most helpful and the funniest

@SebastianBalos

5 жыл бұрын

Randy Smith cheers to that!

The best video I've ever seen in my life thank you very much you saved me a ton of money

BOOM! Perfect vid! Thankfully mine was just thermostat\fuse and the closer one so I could test w/o taking whole thing apart. You rock man, thx for the video!

@ac8074

3 жыл бұрын

You gotta be f’ing kidding me… stopped heating AGAIN! This time though it’s not one of the easy fuses which I replaced easily last time without having to take the whole f’ing housing apart, this time it’s the f’ing heating coil! F*** Samsung. Two breaks in 4 years of owning almost exactly two years apart. F*** this piece if shit. I’m buying a new dryer today, Samsung can suck my d***.

@ac8074

3 жыл бұрын

Like I seriously wonder if there’s some outstanding class action against Samsung for this garbage?! They had to come out and stabilize\fix the washer as its the same model pair where washers were f’ing blowing apart on the spin cycle. Utter f’ing GARBAGE!

Thanks Brother! Got mine working cause of this vid!!

Freakin loved the video! Gives me more confidence when I go home today after work. And, after getting an effing crown done on my tooth, to tackle just another chore in the secret life of being a homeowner... thx!

@johnnyeightball

3 жыл бұрын

Looky there! Got the crown done in 38 mins. and the heating element was bad and out and ordered in 25 minutes! Thanks brother... i had the same number so thx for the link as well! You Rock.. next beer is in me!

DUDE! You are THE MAN!!!! Although we have the same model, the back vent plate is not on my dryer. Also the support bracket that supports the heating coil has two screws in THE BACK instead of tabs. Those were fun putting back. Let me buy you a beer!!! Where you at?

@SebastianBalos

4 жыл бұрын

Im out of Tampa FL. Cheers my friend!

Great video!! I'm gonna have to watch it in reverse to make sure I put the right screws back in. Haha

I laughed my ass off from this video and it was a perfect walkthrough to fix my dryer

Thanks bro, helped me out a bunch!

Just got finished fixing this Mother, thanks allot great video, saved me a ton of money!

You sir, deserve another beer...

Take a picture of the wiring before you remove the clips! I forgot and thankfully I have the exact model # so I put the wiring back just like this guy did and it worked. I got lucky. Great video! Thanks for the help

Thanks for video... saved me some beer money!

Thank you sir. You saved me money and i learned how to do it. Very appreciated!

Thank you thank you thank you!!! Followed your instructions and everything worked out.

Seriously a fantastic video. Thanks so much man. That saved me a ton of [Mario-sound]ing trouble.

Thanks man. In the process of fixing mine now. This helped out Tremendously

@SebastianBalos

5 жыл бұрын

Cheers!

Thank you so much did every think you told me. Part is ordered going in tonight.

Same dryer, same issue....although mine is the same model number it was a little different design near the exhaust hose. It was a hole exactly the size of the hose that you had to reach in check continuity. Major pain but still doable....thanks!

Great video. Thanks for posting.

Thanks for the cash-saving demo video, you rock dude!

Best video! Thank you so much, you saved me so much money!!!! Loved that your language matched mine with the frustration 😂

Sabastian! Greatest video even though I viewed several others when this problem occurred in my crappy little world. I was sure I could replace the parts but I have to admit my IGNORANCE of how to work a multimeter. I’ve never really had to use one now my brain is in overdrive! I was about to finish putting my unit back together and I heard your voice. It was very relieving! You sounded like me when I was a young airman wrestling B52 jet bombers! Every other word was a cuss! I felt young again. THANKS MAN! Sensitive eared people unnerve me for the most part. Way cool of you to really say what was bugging your world. Not your wife. I have one of those too! 😚I was immediately amused but behind my dryer in the laundry closet. It is not a room by no means😕. I finished and watched your whole video! Saving it as I speak! Now I’m 65 $#!t still breaks and we either pay too much for them to come out 4 times like my Samsung washer did. I wasn’t about to jack with that it was just two months old when it took a crap. I left that to my wife. She curses you out without saying anything vulgar. The last two repairmen decided to change everything they could think of after the first three repairmen came out they sent two people. It has been working good. Believe it or not I had a sears set that was working when she had to have this new pretty $#!t. I was mused watching her go off on the phone. LISTEN YOU HAVE A GREAT AND ABUNDANT LIFE. IT AINT EASY SOMETIMES!

@SebastianBalos

3 жыл бұрын

Thank you and cheers to you sir!

Thank you so much very helpful,ordered my parts

Thanks for the vid great help!

Bruh thanks so much. This save my money and my rage.

Agree with all positive comments. The problem was exactly the same and was able to fix it for $16. Thank you!

dude i loved your video first it made me laugh but I changed my heating element out with your directions and it worked!!!! So tell your wife she can do it next time lol!!!!!

We have the same model dryer, but mine was much more complicated to take apart and put back together. I did find your video (along with another KZread video) helpful though!

F***ing awesome. Thank you!!

Trying it now. Not strong enough to loosen the top, so going to get a ball peen hammer to tap with a towel folded around it of course. This will save a fortune. Thanks for the video.

You talk exactly like I do. Thanks for this.

Great video!

This vid is just great ty for making this

Very thorough . thanks !

My man, thanks for this video. Just saved me some money! Took me 3 beers though...

You're the man. Thnx for the video. Funny too.

Finally a DYI video that gets to the fucking point!!! Plus comedy relief! Thanks Bro!

Dude Awesome video!!!!

FN perfect thanks for the help my brother... cheers!

I love this guy!

Thank you!!! Just fixed my dryer!

I followed all of this! Great video, but my dryer still isn't heating, what do u think could be wrong? I changed the entire heating element, i cleaned the lint trap, and pulled off the back to check for lint too...

Thank you for the video, It helped a lot. After I put everything back together and plugged it in, I started the dryer for a twst run and started smelling burned. Turned it off and idk if I should use it or not. I got the correct parts and everything.

@SebastianBalos

4 жыл бұрын

i had the same smell, its more then likely due to the coil being new and the possibility of dust getting stuck to the coil during install and now burning off. not saying that its 100% this, but likely.

@adrianr8486

4 жыл бұрын

@@SebastianBalos yes running my drier as we speak, all is well. Thanks a million 👏

This chit helped me and my lady team up and knock out our repair. Thanks for being awesome, and here's a beer!! ([ `"]

Just saved me from calling a repair man! Thanks!

Spent less than $30 bucks and fixed the dryer with this video! Thnx bro 🍻

I'm definitely subscribing

good video, easy to follow. saved me $150

Great f*** video! Saved me a ton of North Korean yan. Thanks for taking time from the f**** flooring project and Die Hard. You are the greatest man on the Internet.

IDK if they added a few screws in later models, but mine had a few more hidden. Took a bit more effort but all in all good video, and a ton more entertaining than some tech monotone speaking each step.

@DriqBlaq

4 жыл бұрын

Yeah definitely. Like getting the door off, the coil bracket, etc. currently doing mine now & im like um, did someone do this just to not get to it 😅