You are the most positive person on the planet.

@sokoleoko6539

7 жыл бұрын

so true. i would have cried 3 times

@skyrise4827

7 жыл бұрын

I was holding my breath in the hope that it would all stop..

@SailLife

7 жыл бұрын

Thank you so much :) Everything is easier when you're smiling ;) Also I love doing this kind of work so for me it's not that bad to come across something that needs to be fixed. I see there are a few "not-so-positive" comments in response to this video. I'll touch on that in next weekend's video.

@WreckDiver99

7 жыл бұрын

About this point in time I think the universal tool of boat repair was a match...and gasoline (petrol) with some really good insurance on said boat. *sigh* Mads, come on to the US again, and head into the Freshwater area of Michigan! We have good food and good beer...and some of the best diving in the world for shipwrecks!

@Hartmut-58GradNord

Жыл бұрын

Yeah, that's what I thought, too! Just wonderful to see!!

Ugh, all of these negative comments about wasting your money. DON'T LISTEN TO THEM!!!! You've made it clear millions of times (well maybe not quite that many) that you enjoy doing all of this work. What I love about this channel is that it isn't just about the end game, it is about the adventure getting there. Keep up the absolutely fantastic work and for what it is worth I would watch the videos each week even if they were twice as long. In fact, can you please make your videos twice as long?

Oh the glory of revisiting old episodes and listening to you thinking you want to save the curve

My dad gave me this... Imagine that you have a wonderful piece of candy in your pocket. You know it is there and it is in your mind that you want to enjoy that piece of candy. Well, finally the time comes and you go to open the piece of candy. While unwrapping the candy you accidentally drop it on the floor. There are many individuals that would toss the candy away and just get another piece. Then there are others that will pick up that Warrior 38, knock off whatever bits of trash are on it, and consume it for what it is worth enjoying it just the same as had it not fallen on the ground. And that was when I learned not to take pieces of candy from my dad. Thanks for the video. Great stuff.

@kevinschyf3795

7 жыл бұрын

So is the moral of the story not to buy a warrior 38 from mads? :)

Interesting to read the comments of the obvious non-sailboat people (Including one masquerading as a marine engineer. Or maybe he is a real marine engineer who sits at a computer all day and doesn't know a damn thing about a real boat.) They believe that all of these common boat restoration problems are lethal catastrophes.Loving the project Mads.These nay-sayers need a dose of the real world where real men and women make plans and create the life they dream instead of sniveling about imperfection and giving up. I hear them now. "Oh the agony! The deck has a soft spot! Now I have to work instead of having a flight of angels deliver unto me a perfect yacht. Fetch me a cocktail and a xanax while i weep!" I hope they don't get a hangnail and have to be euthanized. I recommend for them a day sailing and enjoying the beauty of nature. Fair winds,James K

@SailLife

7 жыл бұрын

+James K Thanks, James! :) To be honest I feel the exact same way. The issues aboard Athena are not that freaking bad :) Yet one comment literally says that she is "almost unsalvageable". And a few others that Athena is a money pit. I'll touch briefly on those statements in the next video. Spoiler alert: I don't agree and not only that I'd do it all over again. Meaning I haven't regretted choosing Athena :)

@florianz.8721

7 жыл бұрын

So right James K! Athena has a perfect condition to work on. I could see nothing in the vids that could not be fixed. It's a lightly "used" one with a huge bunch of miles on her salty hump and I'm sure with a good soul. I would have choosen her too Mads.

@mikey67nz

7 жыл бұрын

Well said James. When the refit is complete Mads will know Athena inside and out. When things go astray, as they inevitably do on boats, Mads won't be one of those shiny new boat owners who's only option to fix the problem is their cellphone to call for external help. He'll be able to roll up his sleeves and correct the issue. I watch with interest the effort being put into future proofing against problems and ease of access and repair if they do - labeling all cabling, care taken where items are mounted for access in future etc. Mads constantly refers to seeking external expertise for advice and at times asks channels subscribers their opinions. Of course the risk with that is there is always a bunch of people who love to sit in their comfy armchairs and demonstrate the kind of negativity that frankly, dooms them to a life in their armchair. Mads will have the last laugh when they're still trolling the internet and he is on the hook in the Caribbean.

@brianmiley2109

7 жыл бұрын

You are right on James. Most boats were built to take a beating for many many years. Yes things get damaged or age but here are very few things on a boat that cannot be repaired to be as good or better than it was when new, it just takes some time and money. As an older boat owner and Engineer I am constantly working to find a balance between perfect (my engineering brain) and what will do the job. It can be tough but I have learned to not try to make everything perfect or I would never get anything done. If I can fix/ improve the boat to make things close to what they were when the boat was new then that's good enough. If its made it 30 years this way then it will be fine for as long as I need. Love the videos/ project, keep up the good work!

@teriwilson6719

3 жыл бұрын

I love you dude !!! I just bought my first 38’ ketch and it needs every inch of my attention

My opinion, if you can afford it. Start fresh with new core. Know there is nothing hiding under your feet waiting to catch you out. (collapse, and make you want to tear your ears off - or pull your hair out - whatever) Of course, this from someone who, currently, finds it an achievement to get out of bed when I don't need to work. Kudos Mads. really enjoy your videos.

I learn so much watching your channel. Thanks again.

I would leave the foam. Let it dry a good percentage. Repair thoroughly around deck fitting and hardware. Possibly attach 1-2" strips of marine plywood across the deck onto the lower fiberglass in grooves after removing some foam in a strategic grid pattern.Then Replace the top deck to this grid and middle area where new core is necessary. It will be good for another 30 years or more. Of course I don't know anything about boats, except what I watch on KZread. Boat works today I'm sure Andy will chime in and tell you your best options. But you are the type to do it all good and "spiffy". I'm thinking functionality Will she be strong and seaworthy with some moister in the foam core? If so I'm move on the the hull and shortcut the deck. Love your channel look forward to it every Sunday!

several years ago I had to re core the bottom of my 30 ft racing boat. There was no blistering but the core was soaked. spent several months using heat. fans and all manner of recommended gimmicks. In the end we ended up removing it all. funny thing was that after this was done the leftover foam which was in a big pile in the back of the shed dried out. we discovered that the boat was cored with scored divynicell and when replacement was costed out it was more expensive than what the boat was worth.We ended up using balsa core instead.It was well saturated using west system epoxy and bonded to the outer skin in sections with vacumm bags .its difficult to do a large area at a time.It was then re skinned on the inside using biaxial cloth. Every thing was done with epoxy which is water proof. after 11 years i never had a problem again.Unfortunately its easy to get either foam or balsa in Canada or the US I can't help with Europe.But there are boat builder's in Sweden and England and their using it so any well stocked fiberglass supply house should be able to get it for you. I hope this is helpful.

I watched a lot of your videos love your modesty

More power to you. The labor is just crazy. Better you than me.

You should consider renaming your boat, "Legend" because you are fast becoming one on KZread and most certainly will be one by the time you launch. I'm like many who eagerly await your weekly uploads. The deck work will be most informative.

Regarding your remark about cheap chisels; I have a nice set of 3 Craftsman chisels that I use for better woodworking projects; I keep them very sharp and stow them away in their little case. Then I have an old Fuller chisel with a plastic handle that I found on a jobsite years ago. I don't keep it very sharp and just toss it in my toolbox when I'm done with it. But for jobs like that wet plywood core, a chisel that you can use and abuse is nice to have. Thanks for another interesting video.

Mads, maybe you should use straps across the deck from toe rail to toe rail to keep the shape of the boat. Also possibly get some long pipes or 4x4s to use as supports from the ground up to deck height to support your make shift scaffolding to sit on and work. I think the best is to keep your weight entirely off the deck while your removing the core. Just suggestions. I find your videos so very fascinating. thank you for sharing.

Hi Mads, Once you opened the forward deck, you might as well construct a hatch for the chain locker below. This will ease things when your cruising life begins... Greetings from Denmark, Christian

I'm guessing this is like Goudis Sagrada Família, will it ever be finished? You amaze me with your calmness, I would have lost my mind by now. Having said that this is obviously now a way of life and it'll look great when it's done. 10+ points for keeping calm. I think there's a lesson here for us all who face difficulties.

For dealing with the deck: Anyway you could rig yourself up a gantry crane to strap yourself to and push/pull yourself over the deck without putting weight on it? Basically the platform you built, but moveable!

Oh my God! I'm so glad, that I see this so late after you have recorded this! Otherwise I would think, your project is doomed to be failed. :-) I am eager to see, how you fixed this.

The current (June 2017?) issue of Good Old Boat has a good article on making your own water maker system at a fraction of the cost of a commercially available system. After listening to a couple of podcasts by cruisers who are tired of rationing and hauling water in jerry cans, I would think that project would be right up your alley.

Hi sailor, Try an Allen wrench in a drill to remove the core. Put the Allen tool long end in the drill. Spin the short end to whack the core loose. It Works well. The pros build a walkway around the boat to enable them to work from the side and 2 to 3 feet towards the middle. Use scaffolding around the boat with boards across the scaffolds for the walkway. The bridge you made could be used for areas out of reach. This should allow all of the job to be done in one cycle. I Enjoy your videos a lot. I wish you continued success.

@SailingYachtZora

7 жыл бұрын

i agree with the allen key idea. can also use a bent nail

@robertsimon5059

7 жыл бұрын

He is right

@chill214

7 жыл бұрын

Thomas D Harrell or a piece of coat hanger

@jessicakirchoff1214

7 жыл бұрын

Yes I've seen an allen wrench used and does a sweet job. SV Uma owner Dan used one for removing the wet core around his chain plates and then re-glassed. Sweet!

Man DIY is one thing, but this might have been easier and cheaper building from scratch ! I like DIY too, but man ??? Love your videos and all your work, Good luck, because you need it !!!

Only now I realized the magnitude of the project that will be recoring the deck... (at least what I understood it means) Can't wait to watch it!

@razzorbladz

7 жыл бұрын

Filipe Santos walking talking example of get a surveyor out before you buy a boat

A suggestion for the rounded edge along the toerail. Get some strips of 1 inch x 1 inch wood that you can screw To your flange that you left when you started cutting off the top layer of Fiberglas. Set the strips as a guide for your router and use a 3/4 round over bit and you should achieve a uniform round over along the whole length of the boat

Mads, As commentators before me have suggested: If the experts propose to replace the core, they probably have good reasons for that. Then again, you seem like the type of guy who has fun implementing exotic solutions. Here's my proposition for the *laboratory* approach without guaranty for success: 1. Hammer 4cm aluminum tubes in a decent fraction of the screw holes (~20%) 2. Seal off the other holes and cut out areas with duct tape and plastic film 3. Hook up silicone hoses to all the tubes 4. Hook up a heater blower to the rear fraction of the hoses 5. Hook up a vacuum pump to the front fraction of the hoses 6. To check for air leaks, hook up some noble gas to the *inflow* tubes and a corresponding detector to the *outlet* You might try this on a small area to check if the principle works. Then again: Probably easier just to replace the entire core. P.S.: Your videos are great! Thanks for providing quality content. Also:Jökull 10/10 dog. would pet.

Work one side of the deck first and then the other. I replaced my deck core with 1/2'' marine ply, underscored it with saw kerfs to facilitate the deck camber and set the pieces into wet chopped mat. Then I laminated over that. Finished off with fairing compound. Deck cores samples turned out very solid, dry. Do it in staggered sections to keep some stiffness in the deck and let you move around, as well as maintaining shape.

What you need is an old motorcycle front wheel spoke held in a cordless drill ....it rips the hell out of old rotten wood and foam run you vacuum in the opening so it clears away the bits to stop clogging. It works a treat and an old wheel gives you loads, I case your scraper habit catches on to other things.....🙂

Mads you are a brave man! I can't help but feel it would have been less effort to build a brand new boat from scratch! Amazing effort and she is going to be a beaut once you're finished with her!

@brianwalk108

7 жыл бұрын

I agree, very impressive that he can tackle such huge projects without flinching WHILE also documenting the process so well at the same time.

@samiamm5764

7 жыл бұрын

Greg Sargent the real work is just starting on this boat. Good news is although it's the hardest work, it's pretty much the start of the end and after the deck and bottom paint it can finally splash. But rigging after that 😅

@brianwalk108

7 жыл бұрын

true, but fortunately, there's still plenty of sanding left to do! right Mads?

@brianwalk108

7 жыл бұрын

depends on the person. if all you want to do is sail, then yeah, buy a sail-ready boat. If you want to build a boat, then build one, if you like DIY projects, buy a fixer-upper.

@AndysEastCoastAdventures

7 жыл бұрын

You'll find most boats of this age will have some rot in the core somewhere on the boat. It's pretty common due to the 1970's sealant breaking down. The trouble is you can't see it happening.

Mads, in my opinion you need to replace the entire foam core, the reason being that after being waterlogged for years, the foam is no longer bonded to the bottom skin and even if you're able to dry the foam and lay a new outer skin on top of the old foam, it will not be a sound repair as the sandwich will not have the mechanical properties it should have. Think of how easy it was to remove that section of the top skin from the bow triangle. If it was a sound sandwich, it would have taken much more effort and you would have got a lot of foam still bonded to the glass.

@robertvonkulig801

7 жыл бұрын

Silly question number 234576. If you dried the foam then impregnated with resin and a vacuum bag - wouldn't that reattach the foam core to the base layer of glass?? Just wondering is all...

@LeicaLouie

7 жыл бұрын

Robert von Kulig That could work, but you would be spending more in resin alone to infuse all that foam than if you just go and buy new foam which isn't expensive. Plus the deck would become very heavy with all the resin necessary to infuse the foam. If you could dry it. Considering the time it would take to dry the foam and the work required to infuse it, it is more time and cost effective to just remove the foam and replace it. In my supplier I can get a sheet of foam 1.2 meters wide by 2.5 meters long for €20. That is cheap enough to consider replacing all the foam in the foredeck and side decks.

@robertvonkulig801

7 жыл бұрын

Ah thanks that makes sense then - I didn't realise the core foam was so cheap! Just a thought though, if you did wouldn't the close cell foam not need that much resin? Still would replace now but just wondering....

@LeicaLouie

7 жыл бұрын

Robert von Kulig When you do a sandwich construction like Mads' deck, one of the design goals is to make it as light as possible so you don't want the foam to get soaked in resin. Sometimes the two skins are vacuum bagged and when cured bonded to the core. This is always the case with honeycomb cores as they would just fill with resin. With foam, it will soak some resin, and you can get by laminating glass on top of that but you never want too much resin in the foam as it defeats the purpose of the sandwich construction.

@marckessels6309

7 жыл бұрын

Luis Martins h

Your show is great. I like your approach to project management and systematic goals. I hope someday to make the same projects. In regards to the deck, remove it all and replace it.

Hello Mads, your scaffolding to bridged the deck is a good idea but as you say sketchy, to make it less sketchy and easier to use can I suggest some improvements. If you fabricate two right angle pieces using the same wood you have balanced on the toe rail, say 1100mm long so you span at least four of the holes in the toe rail, or perhaps two shorter sections for each side to deal with the curve, then you can use bolts with wingnuts to fix them in place anywhere along the toe rail to support the pieces which are spanning the deck. The span pieces will be stronger if turned on their edge and if you make a frame with two spanning pieces port to starboard and three braces bow to stern that is 1000mm front to back and as wide as the widest point of the deck plus 500mm for a safe overhang, then sheet it with plywood, once it is in position screw the platform to the toe rail brackets suing some L brackets and you have a safe movable and pretty spiffy work platform. Regarding the core, just remove it and re-core it! Regards, Dave.

17 minutes Mads!! I can live with it. Good luck with the deck.

I'm starting to think that you picked out the best/worse sail boat you could find just to have something to do. It's a good thing that you are the most talented DYI person I've seen so far. Keep up the great work.

Great video! I honestly believe you enjoy the repair work more than the sailing, and you are great at doing it! When you finally shove off for distant shores, you should bring all your tools and work your way around the globe fixing boats for other travelers (especially the tech side of things). Keep the videos coming and I'm glad you got this "project" boat for the rest of us to learn the DIY for sailboat refinishing.

In Good old boat, a guy replaced his deck supporting it from underneath with wood strapping. He was able to replace large areas of the deck at one time. I think you should support the deck, or at least the forward section from below. Doing it bit by bit from above would take longer and you risk falling or stepping on the deck using the "bridge" that you showed. Good luck!!

Mads- I think the Gougeon Brothers have a technique for drying out a foam core where you drill a bunch of holes into the core and then basically vacuum the water out of the core, then fill the holes and add on a layer or two of glass on top. Since you're getting that fancy dancy vacuum soon I'd give it a shot. Either way, I'd call them, if you haven't already, cause they're kinda the gurus of epoxy repairs ( in my opinion) Good luck and thanks for the positive videos

Great video. You are courageous. But keep it up because you have encouraged me.

Sorry to see your teak deck troubles...but most of us who have old grp boats, even without teak decks, have some deck work to do. I will watch with interest as you tackle this problem in your usual thorough, methodical, and well-researched way and will take notes for my similar project. Keep up the good work!

Hey Mads, just two quick comments regarding some of the negativity, especially the one from what I presume is a marine surveyor. If someone asked me if they should buy a wooden boat, I'd tell them to run a mile. I love wooden boats, but I for one don't have the time to maintain one. Nor do most people. But for those that do have the time and dedication, they are wonderful craft and a joy to behold, under full sail. A marine surveyor has a responsibility to tell a prospective buyer that their dream boat has problems (ie, osmosis) and they should consider another one. Fine. Maybe the prospective buyers are weekend sailors and just want something which spends most of its life tied to a pontoon and don't want to have to strip back fibreglass. But that doesn't mean osmosis is a make-or-break decision for everyone, just for a lot of people. Well done for choosing to breathe life back into this boat. Second, you've removed the teak deck and cut away the upper layer of fibreglass and found rot. Do people seriously believe that their own boats are in pristine condition, without also cutting in and having a look? I have heard of people drilling into the deck from below, to be greeted with a stream of water. They're condemning your boat because they've seen inside. Most fibreglass experts will tell you that crazed gelcoat can be symptomatic of much worse de-lamination in the fibreglass, and that just filling in the cracks only hides the problem. In other words, all boats have some or other issue. Keep it up and let the armchair boat owners dream of perfect GRP.

I was hanging out with my friend Eric this weekend in Austin and found out that you have been sailing with him aboard his Beneteau on Lake Travis. VERY COOL. You have a big following and I look forward to your episodes each week. Thanks.

The more I watch the more I am impressed with your skills, and even more your stellar attitude. I've seen most of the re-core project, a good portion of the earlier stuff, and have been following everything the last few months so I know the "spoilers." But watching you dip your toe into this massive job and observing your reaction to the scope of the deck repair ballooning massively, I am nothing short of astonished at your can-do reaction and calmness accepting the mantle of this behemoth undertaking. Bravo! You deserve to win the internets,, and the prize for the best DIY sailing vlog ever. You are a master at DIY. You can easily figure it out as you go, which in my estimation is worth a ton of "old knowledge" in specific maintenance tasks. Anyone can do the same thing over and over again. You adapt and learn, listening to experts and Internet know-it-alls alike to synthesize your own plan that works. Your end results speak for themselves. You very much deserve and have earned the fruits of your labor. Athena will be better than new eventually, and you'll be the master of her knowing every square centimeter, confident that every part will be top-notch once you are done with this refit and will be able to maintain her that way with little effort going forward.

Mads, you sure look and sound calm in the face of a LOT of freaking work! But in the end, as you're beating into 6 foot seas, you can take comfort knowing the new deck will shed the water. Very enjoyable video!

If you built shoring (supports) from construction lumber under the deck in the cabin, it would brace the deck while you were recoring it. It would help you preserve the curve in the deck while supporting the center until you could finish glassing in your repair section. Build a timber beam that goes athwarships following the curvature of the overhead in the forward cabin and put a compression post from the beam to the cabin sole in the center.

Hi Denmark! Methodical investigation and repairs give you an undecided advantage with results you can rely on. Athena will be more shipworthy than when you brought her home. She deserves you. Your project makes my own repairs seem simple by comparison. Each step takes you closer to you goal. Captivating stuff. The production quality is very good. Next chapter please! Canada

Great vid, Mads. Interesting, that strip of plywood down the center of the deck. Never saw construction like that before. Not sure I understand the builder's logic, though. IMO yeah...just replace the core. Anything will dry out if you *wait* long enough. But time is money, as they say.

A very disappointing discovery but incredibly well handled, well done Mads, or so the vlog indicates. I actually have visions of 'tears off-screen' and a few 'despairing dang its' for good measure. I doubt Athena's condition is the exception. It looked to be a fantastic boat and clearly passed survey several month's ago, so I'd be very interested to hear what Trident Marine - the builders may have to say. I bet a few professional boat surveyors are following your disclosures. Your fantastic vlog will help hundreds, if not thousands of other boat owners to 'sus' out their boats. Thanks for sharing.

Hey Buddy! fellow friend from the north here (Stockholm). i*m as well in the middle of a refit and i thought i would recommend a tool that i have found extremely useful, Tormek t7. i know its an expensive kit, but so is working with dull tools, i have a sett of crappy chisels, and a set of good ones, but they are all literally razor sharp, and that makes all the difference when working, + its super fast to resharpen so i never need to buy new tools for the fresh and sharpness :)

I would reach out to Boatworks today on KZread, he does this stuff for a living and has a nice channel. Good luck and keep your positive attitude.

@dickarbot9283

7 жыл бұрын

Brian Totten where is the boatworks today guy When you need him???

@jackodonohue2717

7 жыл бұрын

Brian Totten I said the same thing

For digging out rot and other junk: Take a large, cheap flat-head screwdriver and heat the shaft just below the blade and then bend it 90 degrees in a vise. Sharpen the edges and you have an excellent scraping tool. I did that to make a reef hook to dig out old caulking between planks. The tool would dig very nicely under that lip. Happy digging!

@TigRdk

7 жыл бұрын

would you bend it so the flat head is parallel or perpendicular with the original orientation of the shaft?

@mrsmeganluke

7 жыл бұрын

For Mads, I would bend it perpendicular. Mine was a reefing hook for removing old seam compound, so it was bent parallel.

Keep up the great work mate. Your videos are more entertaining and teaching than anything on tv. And you have very good attitude. Attempting such scale of deck repair work on diy is really brave. To my perception that work may require more expertise than amateur diy. However, considering the great work done so far, I think you will succeed this one as well. There is another important matter; we occupational health and safety professionals call it as "working at height". I strongly recommend you to consult a professional and maintain fall protection or prevention while working on the deck repair. If you fall from that height, you may hurt really bad. And I recommend you to use ear protection while using noisy power tools for your long term health. Thank you very much for the quality of your diy video.

As others have suggested, how about checking how much would cost scaffolding around the boat? Your little platform is looking unsteady! If I was doing it, I'd replace the wooden part of the core as much as possible in one go (I think there are 2 sections separated by a hatch). Then work on the foam in smaller sections. Best luck to you, keep the good spirit up!

Mads, don't let the negative comments below put you off particularly from the pros. Their perspective is on of cost to repair and since your labour is free is makes the repair cheap for you. Remember that the function of the core is just keep the upper and lower skins apart. Provided it is still bonded to both it doesn't really matter if the foam is wet. Replace the wood (and foam core if you must) in small overlapping sections re-skinning as you go. Then a skin of bi directional over the whole deck. Fair the lot at the end. Oh and don't worry too much about a bit of osmosis - the harbors aren't full of sunken yachts that died from fatal blisters disease. In 100,000 years the only thing left of our civilization will FRP boat hulls . And I would buy a used boat from you.

@eurotrash4629

7 жыл бұрын

The concern isn't sinking in the harbor... it is being worthy of the sea.

@lotophagi711

7 жыл бұрын

Yes, I was being facetious. My point is that FRP boats don't sink because of hull osmosis.

Short but sweet. Always enjoyable. Thanks Mads.

I like your solution for working on the structurally compromised deck, but would spend a bit of time on the feet to make sure they firmly grasp to toe rail. And I disagree with your boat repair multi-tool cabinet scraper. Get a scraper bar (looks like a thin 20cm long, 5 cm wide crowbar) and then you'll really have the ultimate reno multi-tool. You can pry and scrape. It will even replace a slotted screw driver in a pinch.

Another great video, I can't wait to see the progress on the deck.

Love it Mads. Thanks for taking the time to do a video, I can't wait for next week.

As always Mads, an entertaining and informative vlog post. Keep them coming and have a great week!

Love you videos today! I help my breath when you opened up the bit of deck!

Dude, you inspire me! I feel slightly less overwhelmed about the soft spot on my port bulkhead/chainplate repair...after watching you take off your teak decking. Whatever gets thrown at you, you just deal with it...a true sailor. It's the adventure, the unknown, the mystery of the thing. You are my north star.

Thank you for sharing Mads - great info. and a learning experience. We admire your work ethic and attention to detail.

One of my favorite KZread channels. Keep up the fine work. I look forward to your vids every week.

Ref sources, Boat Works today, SV Dream chaser, Restoring Susana, Restoring Susana is a very long series but full of new construction techniques SV Dream Chaser has deck repair also but i dont think he had foam core but it was sections of wood , a good reference for you. Boat Works today just posted his last video for exactly what your looking for. Lots of research, enjoy the project ,you will be proud of it and have massive amount of knowledge for future boat builders like us.

Hi Mads. I replaced the entire core on my boat. and i removed all of the old core at one time. Yes it was soft to walk on, and i did my best to make sure i walked along the edge of the deck, or where i knew there were bulkheads. I made a lot of mistakes along the way, but the deck is solid now, Since i remove all of the core i didn't try to reuse the old upper layer of glass. I laid all new glass, I should mention that i also replaced the coach sides and coach roof after recoring the deck, then did all of the fiber glass work . One hell of a lot of work. and a LOT of cloth and epoxy. Yes i used epoxy instead of polyester.. a long story for anther time.... If you have any thing specific you'd like to know, please let me know.

I had no idea 💡 you could make such extensive repairs to a boat 🚣 of that type. Great 👍🏻 videos!

Hi Mads, your infinite energy provides so much motivation for working on my own boat... Thank you for that.

Fantastic work. That's gonna be one awesome boat when it's done 😊

Mads, I'm so impressed with your attitude and skills. Every heartbreaking new discovery you find you greet with a smile and a can-do approach. A better man than I. Cheers

Perhaps you could use a wire wheel on an angle grinder to get the rotten wood out from under the lip?

Mads I love your videos and wish you the best. Looks like a lot of work to come, but you like to see things done right. I know the deck to come will be even better.

We follow every episode! Fascinating to watch your logical approach to all aspects of systems of systems: electrical, electronics, infrastructure, plumbing...keep up the great work! Vikings Rule!

Wow, a whole lot of work ahead, looking forward to the continued series on deck replacement.

You are about to tackle one seriously major job! as in all your other projects I am sure you will do a bang up job! Good luck.

You just won my subscription and my loyalty in watching all the freaking add !!! Congrats and keep the good work !

mads even your so called "light " videos are better then anything else on youtube. Good luck in the next couple weeks !

OMG !!! I had no idea that you would have to replace the core. I would have thought that with some heat and being in the shop it would dry out. Man, I have to give it to you, you have more patients that I would. Keep up the great work......stay strong. You are doing fantastic.

I must admit I was amazed that you still had a cabinet scrapper left after your previos episodes where they disapeared into the abiss below lol!!! Love your channel.

Hey mads, this is the first time I saw one of your videos with just 5 comments, so I just had to comment! I love you videos and watch faithfully! Great work, thanks for sharing!!!

Dang nab it! Please buy some chisels. Yes, even a cheap set you can abuse and save the screwdrivers for.... screws! Anxiously awaiting the deck results. Good luck, Mads.

4:15 My opinion is to get rid of the top layer of fiberglass and relpace the core. It won't take long at all. What will take a long time on the other hand is to try to achieve a perfectly faired surface. My advice would be to make a rough fairing. Then keep the smooth surfaces to a minimum. Hence maximizing the non skid areas. I used gelcoat I sprinkled with glass beads, then I applied another coat of gel coat and finally PVA. Alternatively you could use kiwi grip. In my opinion Interlux's interdeck is great but it is too thin hide the imperfections on your repaired deck. Hope this help.

Hello Mads we are long time watches, me Luke and my brother Adam are currently sailing around Great Britain on our sabre 27 we left on the 1st of May and we have reached Plymouth so far we are really enjoying the trip and learning a lot would just like to say we sit down every Sunday evening and watch your video we have watched all your videos on your channel at least once some of them even twice, we really enjoy your videos and it's great entertainment, thanks for making them over and out haha

Mads, Both options are a good option for your boat however, If you are already removing the top layer to dry out the core foam layer than why not replace the core as well. You are already there either way so I say go with the extra step and have the piece of mind knowing that she has a new core. This also may be a good way for your to contour the deck shape a little better going to the toe rail! That way it is nice and flush instead of having a Slope or step down right next to the rail. Just a thought!

I still say, have a custom molding cutter blade made and mill some PVC or other synthetic material so fill that gap between the toe rail and fore deck. The trick is to use a caulk that is removable so that you can re-bed in in the future. PVC can be bent to conform to the curve of the toe rail.

Hey Mads, I think the nuts were actually already threaded onto the doo-flickies (now I need to re-watch so I can remember the name of them)...I see what looks like a spot to put a wrench at the end of the ?glans?, and then there is a nut threaded on behind it...un-thread the nut, and put the glans through the hole, then re-thread it...I am probably completely wrong, so I'll just shut my cake hole now! Great channel by the way!

It's not the quantity, it's the quality that's important. This was a very interesting video regardless of the length. I have an old boat and I am pretty sure the deck is good, but now I have a sense of what the structure looks like if I need to make repairs. By the way I am amazed you can contemplate replacing almost the entire deck without curling up in a fetal position and whimpering for a few hours. What a daunting task!

Just for credibility sake. I am not a marine engineer. I am a live-aboard sailor/cruiser who has restored five boats from a Dyer Midget to a Brewer 42 Ketch.I ENJOY DOING all my own work from fiberglass to mechanical to electrical and carpentry.I am still learning. Including from your videos. Thank you! I believe you are doing a fine job on a fine boat which will weather a strong blow and see many a mile beneath her keel before she is done sailing the seas.I hope to meet you someday afloat and share stories (mostly true) and rum. Just look for the blue Allied Princess S/V Sea Dragon out of Oriental,NC

wow Mads that rotten core is a big problem. I'm always amazed how you face down these big bugbears with a shrug! Very interested to see where this goes....you have me hooked

I have a Warrior 35 and I am so glad it didn't get a teak deck..it is fiberglass w/gel coat and so far dry. wow

being positive is great!! love this channel

Mads, I dealt with a similar problem on my good old boat (1964 Seafarer). Had large sections of rotten core on side decks. I made the mistake of removing too much of the core in one session in hopes of being able to repair large sections at once. Better to do it in smaller sections -I recommend not much larger than the area you already uncovered in this video - and definitely install a brace under the area being repaired to support the repair and maintain the camber of the deck. Maybe brace the hull sides as well to keep the hull from flexing in while you fix her up . Excellent work, excellent videos, excellent positive attitude! Thanks for providing inspiration to the rest of us!

Well Madz it may have been a short video but it certainly carried impact and has generated many comments and advice. I will throw some in for consideration too 😀: 1. Drying the core - try your vacuum mats? 2. Accessing deck for repair AND maintaining hull shape - erect a scaffold tower either side of the boat and fix the sides of the boat to the scaffold using horizontal scaffold poles attached to the towers and the toe rails (adjusted using opposing wedges) this will also allow you to erect a deck working platform. 3. I would also prop the deck from underneath with a 4x2 using pad pieces top and bottom, adjusted by opposing wedges and once tight dog the wedges to the lower pad. You may also wish to consider knock up a temporary cabin top workbench with shelves underneath for storing tools. You are going to be spending a lot of time up there. This is a great project and your resilience and good cheer is 'kinder' amazing (sorry for the pun).😉

I've had to do this on my J30. I'd do it in sections as well. Fortunately it was only 3 small areas and just filled with resin. Worked out really well.

Keep smiling Mads! I took a look at "Replacing Deck Cores" on KZread (you may have heard about this channel!) and found many good and several bad examples of deck repair work but well worth a look. You may have already looked several hundred times already but it reminds one that we are not alone and many determined guys have battled through the same challenge. One thing I did not see was stepping or overlapping of replacement core. I have always stepped the joint to avoid creating a weak line anywhere. Good luck and my favourite channel by far.

Would love to see a where are we now recap of what's been done to the boat and what's left to do. Something similar to the boat tour you did in Scotland right when you where purchasing Athena. Keep up the great work

Phew big job ahead! I have recently finished replacing rotten ply in the decks of my yacht. I would highly recommend getting a set of chisels from 6 - 25mm especially to get under those flanges you will have around the edge! Also if its possible, getting a high scaffolding set up so your deck is at about hip level would make it a lot easier, especially on the side-decks. Keep positive and focused, like you do and "she'll be right mate!" :-)

Teak over wood beware on old boats ! I had a 1972 Trojan and looking under the deck all the way around from in the cabin the plywood was all rotting and turning white. I was a novice when I bought the boat. The teak was finished with a product " Teak Ole " . Many comments on the beauty on topside. Nobody new the horror underneath!

Hey Mads, you deserve double likes just to put you back in shape with the suprise hurdles of this week. So sorry for all that, guess that upside is that we can all learn much more.

West systems is a standard here in the states. Have you considered removing the top layer of fiberglass and vacuum bagging an absorbent layer on top that can be disposed of. I used a vacuum cleaner on a caravan top that was soaked and got about half the moisture out. The rest was two weeks of nonstop fans. Someone recommended alcohol as a drying agent. I didn't have the courage to have a fire start inside my garage.

Built supports from below so your deck doesn't sag, also you could make templates of the deck curvature that you can fare to.

To scrape out that ply, I'd go to the local metal sotre and get a piece of steel bar that is the same width as the thickness of the core. cut it into 2 pieces. one on piece bend a 90deg about 1 inch from the end and then sharpen it to ouse as a rake to pull out the ply bits, take the other piece and just sharpen the end like a chisel to also use as a chisel scraper! might help By the Way, awesome work!!!

Hi Mads, while I love your videos your costing me a fortune. Every time you recommend something to keep the Angry Pixies at bay my husband has to buy it. In fairness you recommend some good stuff so I don't mind putting good stuff on our boat. We always look forward to your videos and wouldn't mind if they were longer. Cheers Anne

Well Mads your idea of bridging the deck is perfect. This gives you a stable platform to work from. I suggest a more secure connection to the toe rail or better yet a scaffolding along the side of the boat.