Loved this video! Just got two old 1604 VLZ pros from my old church. Pastor said “take em both”. Gonna dust them off and see what’s what when my Deoxit F5 fader lube gets here.

This is very detailed. great video man. not taking any tests but im grateful for your time.

Love it! Still my favourite workflow

Great tutorial! I bought used (but in excellent condition) an older version of this mixer (the mixer is not with me now and I don't remember any RCA connections on mine and the 10 XLR preamps on the bottom row were an add-on (which I have)). I use mine for live shows so the auxes are used for effects and monitor mixes. I wish I had more gigs to use it. :-/. I remember when playing bass on the blues circuit in the Boston area in the late 90's and early 2000's, these mixers were very popular in the clubs which provided sound. I could only dream of having one back then. Again. Thanks for the posting this great tutorial

CRAMMIN FOR THIS FREAKIN SKILLS TEST >.

Great tutorial. Thanks!

Great video

Very helpful, thanks!

@rachelmillward4610

6 жыл бұрын

Mackie 24 mixing console

just bought one of these on eBay and could not get a quadraberb I also just bought off eBay to work. I thought one or both were just broken. Manual didn't help much. this video helped more . Turns out I just needed to press the 'returns solo' button.

Thank You! :)

What’s the best way to hook up a graphic equalizer to that mixer

Muchas gracias, me sirvio mucho.

Great mixer for a home studio

@Denilson-Carreiro

7 жыл бұрын

Greg Marchesini How do you use it with a DAW?

Hi, talking about "subout" channel usage for recording, do I need to use Y cable to connect bus 1 and bus 2 to recording equipment separately ? thanks for your patience

It would make the spagetti fo the patch cords easier to understand if they were color coded

how about the sound quality? or is it better than the previous series which is still released in the usa?

this whole time im checking out this video didnt even notice it was published by SAE lol

Love this video ❤… if you are sending subs to a daw for recording via your audio interface, and you want to bring a few channels back into the desk, where do you plug them in ? Or do you have to remove your line inputs from your instruments first and re patch ? Thank you anyone that has an answer , much appreciated !

Sorry for the "down thumb", finger mistake ! In fact, thanks a lot

@blackrichard1029

11 күн бұрын

Just click it again to toggle it back off. (I've done the same.)

How would you go about drum bus compression without using 2 more channels? I have a 1604 16 so tracks are limited. Just setup a left(aux1) and right(aux2) and send all drums to that? I assume you just adjust the send return knobs as sliders? Also that throws it right to the master right? Can’t route it anywhere.

Thank you for making this tipe of tutorial. I just suscribe becouse the way every single aspect is explaind is extremaly clear to everybody. There is a thing I couldnt understand. It was not mensioned)!!!!! When a procesor is conected via INSERT, is the sgnal afected pre or post fader??????? THANKS in advance. I hope to heard from you.

@MattHayes

8 жыл бұрын

+tuneroneff Pre-fader

@piratedprivacy9052

4 жыл бұрын

tuneroneff Neither Prefader nor Postfader. Insert break point SendOut signal is only affected by Gain/trim settings. however, Insert break point Return-In after being processed, will continue down the path to the next/rest of channel mix ie PEQ, Auxes, Main/SubG assign.

My buddy has one of these and it's almost become one with the earth. I can't get it to hardly do anything it's supposed to do. It gets kind of embarrassing sometimes.

Is there a way to use external preamps with this board?

I've watched quite a few PA videos, this has got to be the most interesting, lost me for a while at aux send / return bit? If I'm using aux 1 and 2 sends for stage monitor mixes, and then aux 3 and 4 sends for outbound effects like chorus and reverb, I'd always take the aux returns into aux 3 and 4 returns, but during the video you seem to be taking from 3 and 4 and feeding back to 1 and 2, I didn't know you could/should do this, I realise you were setting up for recording so not the same, but how does the pre/post fader switch affect this when the return isn't in the same value as send?

@piratedprivacy9052

4 жыл бұрын

HRJ1411 You're confused... You do not need to follow the NUMBERS of the AuxSend to those of their Stereo Returns. A Reverb/Delay wet signal can be returned/mixback into the board in whichever StereoReturn that you wish/worked best for you. Eg is AuxSend3 to FX unit, a wet signal after the FX can be returned into StereoReturn1/2/3/4 or any free channel strip eg channel9-10(but remember Not to turn up the Aux3 knob for these channel, otherwise a signal relooping occur).

My only complaint is, I wish I was able to see how the mixer is hooked up to the patchbay so I could have a better understanding of how they interconnected.

@unc1589

Жыл бұрын

You’ll never find an analog mixer video that tells the whole story! “This is the mixer section- these are the inserts-this is the fader…” That’s all you get. Not… “ok plug in here- push this button- hear nothing? It’s because you gotta push that….” They think we should figure it out. It’s like “so you just waisted our time!” Never!

@350zgr33n

10 күн бұрын

@@unc1589he’s showing how to use a piece of gear. It’s up to you to learn how to mix

Kindly may you create a tutorial about yamaha 01v96i you explain in it this machine

✊🏽✊🏽💯💯❤❤💯💯✊🏽✊🏽

Which hole do put my monitor

When you shift Aux 3 to make it Aux 5, I assume it's still the same level as Aux 3? In other words, Aux 3 and 5 cant be set to different levels.

@jawilli69

4 жыл бұрын

sbrave I believe you’re correct, but on each channel you can do it different, so on channel one you may want to use a stereo delay, but on channel two you may want a reverb. So Aux 3,4 can be used for the delay unit, and Aux 5,6 can be sent to the reverb unit. That way you can have 2 stereo effects, or 4 mono effects, hooked up and available to use. Only drawback being you can only use 1 stereo effect or 2 mono effects at a time per channel.

@piratedprivacy9052

4 жыл бұрын

sbrave No, when you set level for Aux3, it is sent to AuxOut3. But after you pressed shift5/6, what the level you've set at knob Aux3(5) remained BUT is no longer output at Aux Out3 but instead to AuxOut5. To note here is that, there is no Master Send Aux3/4/5/6

frequency n mixer

Very well explained. I understood every word you said, but, I have no idea what you said. 🤔

This vdo hd quality upload

it doesn't have stereo inputs?

@100chuckjones

6 жыл бұрын

Do you know of a mixer that has 2 inputs per channel for stereo input ? They are all balanced and TRS inputs. You want to use 2 channels for stereo input applications so you can control Volume level of spectrum.

@mz2250

5 жыл бұрын

@@100chuckjones a lot of pa mixers have stereo input, like the cousin of 1604 the 1642 ( channels 9 t0 16 are stereo input) or soundcraft Spirit M12 or Spirit E8 there's a lot

@100chuckjones

5 жыл бұрын

Those aren't Stereo inputs, they are called Stereo returns (for FX).

Tiếng gì chả hiểu được. Sao không nói tiếng việt ông nội

226,000.00 gold album sales (city) life

what is with this video quality SAE? And wheres my ipad huh????

24 chanal mixcher tutorial im bangladeshi

This really doesn't help much. I have the 1242 mixer

Great video