Thanks for the video. It gave me confidence in replacing my broken am4 socket

@mpchri5696

3 жыл бұрын

@Branson Keagan wait are you for real?

@mauri11

3 жыл бұрын

How did it turn out? When removing cpu cooler it ripped the cpu out the socket making it loose. I too want to try this

@stlich2

3 жыл бұрын

@@mauri11 Just remove the top part gently. make sure the lower part is still intact and the am4 socket is the same brand as found in your board

Be careful with which one you buy, because there are two brands, the Foxconn and the Lotes that Gigabyte uses. Lotes is a bit more difficult to remove, but by first removing the front it is easier to remove the lever, after which it is easier to get the back off.

thank you, it was very helpful

what are you actually doing to the contacts/pins?. are you using a sewing needle to straighten the contacts. some seem to be missing or have they been pushed down inside???

Thanks, I had a pin stuck in my motherboard managed to remove it!

thanks for you. you save my money

0:48 9:22 easy socket cover removed... It's a fragile part easily broken too...

Hi can we replace the first plastic cover the one below the one you replace Thanks for your answer !

This video makes it look easier to remove the top of the AM4 socket than it is. Besides the three spots at the back, there are two spots on each side where the socket snaps on. There are narrow slots on each side where these can be very gently pried loose. Easy to break this if you are impatient.

@JBpsx

2 жыл бұрын

I broke them 😿

@ANDYWU06

2 жыл бұрын

i remove the top it again used a new one. I could not agree more

what happens if you break one plastic from the back of the plastic cover when attempting to remove it from the socket? is it bad for cpu or motherboard?

Nice video thanx , pls don’t put board on the wood it will scratch it

¿Could you please make one tutorial to learn how to remove the socket plastic pad? I have an issue with that step of this tutorial. Thank you. Regards from Mexico

@ANDYWU06

4 жыл бұрын

Not difficult

@ANDYWU06

4 жыл бұрын

there is a tenon on the back to open it But be careful Don't break

@sqda

4 жыл бұрын

@@ANDYWU06 difficult for me

@ANDYWU06

4 жыл бұрын

@@sqda Maybe the video details should solve the problem

Hello, will this method of “removing the socket cover” work with previous versions of AMD Sockets? AMD3+ with a 9590 CPU... I have a few bent pins but I don’t seem to have as much access as you do to the pins?

@ANDYWU06

2 жыл бұрын

Maybe. but i only have am4 socket

@ANDYWU06

2 жыл бұрын

repair Open circuit

Do you have any idea where I can find new plastic pad for the socket, my friend gave me Asus Rog b450-f gaming cause my friend broke the plastic pad.

@ANDYWU06

4 жыл бұрын

i have not ideal maybe taobao

@Mr11ESSE111

4 жыл бұрын

aliexpress

What happened? The pins on the motherboard bend? Is that possible in the Am4 socket??

Thanks for the video. The connectors inside of my socket seem to be missing, any ideas how to replace the entire socket?

Could you explain why you replace the plastic pad? I have an Issue with the plastic and I want to cleaning it up but I don't want to break it. Thanks

@ANDYWU06

4 жыл бұрын

Not difficult

For what reason the pins bends?

@stefanzlatanovic7521

3 жыл бұрын

Somebody was stupid enough not to look at single AM4 installation tutorial. No way a man can make a mistake like that and he can later claim he is not insane. Easiest install ever.

if only pins in socket are broken then there will be no display on monitor but everything else would work from coolers,gpu,start button...?

@ANDYWU06

4 жыл бұрын

coolers only ,if it Open circuit

@Mr11ESSE111

4 жыл бұрын

@@ANDYWU06 mine GA b350m gaming 3 with athlon 200ge works everything from coolers ,lights,gpu coolers,buttons for start but no display pic on monitor!! it could be broken &bented pins too ??

@Mr11ESSE111

4 жыл бұрын

@@ANDYWU06 so there will be no display pic on monitor if pins are bented ?? probably it is because why would someone fix them if everything are ok and you get pic on screen !?

@ANDYWU06

4 жыл бұрын

yes,will be no display pic on monitor if pins are bented

I broke my platic pad. such low quallity shit

Do you fix broken CPU pin?

@ANDYWU06

3 жыл бұрын

I am looking for a professional repair amd cpu store

how to fix plastik bracket over the cpu,does anyone sold it ?

@ANDYWU06

3 жыл бұрын

FPS Games ebay

How u put the socket back?

@ANDYWU06

3 жыл бұрын

?

@nikolovdimov9493

3 жыл бұрын

@@ANDYWU06 Oh, forget it, when i made the comment my gaming pc was having issues but now is too late, i have to buy again my motherboard and cpu.

Why didn't you show a closeup of how you were fixing the pins?? Without that the video is useless.

bga rework station brother ... no need to watch, socket swap

@SolidComputers

7 ай бұрын

How to do that?

What are you actually doing to repair the socket here?

@ANDYWU06

4 жыл бұрын

repair Open circuit

@ANDYWU06

4 жыл бұрын

Jaymiecain1 repair open circuit

@alejandromorejon74

4 жыл бұрын

@@ANDYWU06 don't understand, what do you mean with open circuit?

@ANDYWU06

4 жыл бұрын

@@alejandromorejon74 Current does not flow

@alejandromorejon74

4 жыл бұрын

@@ANDYWU06 i have un am4 motherboard and de pins look like yours, the motherboars does not react. I press power buton a don't do anything. Does symptoms could be fixed, by your solution?

stop the music first!