For anyone still interested the pin that broke off was a VCCGT pin. These pins deliver power to the integrated graphics. There are upwards of 15 of these pins so chances are the board would still work.

@igorrizvic6008

3 жыл бұрын

Good to know..thanks for sharing hehe

@atechnews3221

3 жыл бұрын

I don't have any reason to not believe you, but can you tell me how you knew from the video please.

@Jencha010101

2 жыл бұрын

@ATechnews last I had to identify CPU pins, I opened Intel datasheet for particular CPU and ball grid map was all there.

@mcLOVINdonalds

2 жыл бұрын

@@rectify2003 any idea on how to find that? Im having trouble myself and would like to find said data sheet if possible

@PicelBoi

2 жыл бұрын

Make sure you need a eGPU! Otherwise f*** you, Intel HD Graphics.

This is the scariest video I have ever seen.

@realhusky

4 жыл бұрын

Do it in the dark with poor lighting because you have to catch a flight in 6 hours. Expert mode.

@Ocean_of_charges

3 жыл бұрын

Fixing AMD CPUs pin is much better than fixing LGA sockets 🤗🥰🥰🥰🥰🧘‍♂️🥰🥰🥰🥰🤗

@satishkumar-gg5fm

3 жыл бұрын

Can you replace cpu socket

@vy9004

3 жыл бұрын

@@bitlegion9903 No, the socket is replaceable by special equipments

@KonexionxCancun

3 жыл бұрын

@@vy9004 thats correct, those sockets are bga like gráfic cards or other chips

Fibers on the tweezers triggers my OCD

@TidusDX

3 жыл бұрын

Same, why not just lift it out rather than poke more pins around with it hanging on.

@salvadordollyparton666

4 ай бұрын

exactly why i stopped watching and came down here... like YOU SEE THAT RIGHT? if you can't see it, why are you doing this... if you can see it... WHY are you just continuing to tangle it around more and more pins... i'm not the one with a problem... ocd or whatever, anyone NOT bothered by this is just half ass. if a thing's worth doing, it's worth doing right... and then overdoing.

@salvadordollyparton666

4 ай бұрын

oh my god... there's MORE!!! everywhere he messes with, seemingly... is he doin it on purpose? that's the only excuse, to mess with the person... but then, maybe a bit unprofessional, but kinda funny. unless it turned out to be conductive... then, just shitty for a paid job.

When you started straightening them, I held my breath lol... sign of a great video! Thank you for sharing.

@brat_ox

6 ай бұрын

same xD

This is the ultimate nightmare repair. Nice work and incredible patience.

The patience you have for that is amazing 🤩

I have been building my own pcs and those for friends and family for almost 20 years. Last time the chip types were changed I jacked up 3 motherboards by not putting the CPUs in correctly :( so fragile! I tried to straighten the bent pins on one MB but it was never good enough. Mad respect for your work sir!

@belowboyt9876

2 жыл бұрын

How do you even screw up the pins? Seriously there are indicators the CPU will only fit one way.

Incredible steady hands Brother. If I lived in your area you definitely would get our families business. Great job 👍🙂

@Danroku78

3 жыл бұрын

Where is that

I took at a lot of your videos. You got a big experience and knowledge. Your skill level is very, very good. Hat down for the patience on this job. I would not bother myself to straighten the pins. I did not count them in the video, but i would do a socket replacement right away. It is dependent how lucky you are. If you have broken signal pins, then it makes no sense to straighten the rest of them. I would go max for 3 bent pins, more than that, only a socket replacement.

Thanks for posting this dude, watching you do this gave me the confidence to try the same (and successfully fix) my new Z490i Unify's fully u-shaped pin!

You must be a neurologist, why you are here sir. Anyway huge respect to this electronical nero surgeon.

Steady hands of a surgeon, pretty amazing.

This is a video done by a real professional who knows what he is doing. Hard to find on KZread these days.

Same condition happened with my motherboard pins and I had relocated them to correct position after watching this video. Everything works fine now. Thank you for this video.🙂

@DokasCODMUploadz

4 ай бұрын

Also with me

Thanks, this helped me to understand how the pins are supposed to look and behave.

4:34 - right then and there was when I stopped and cursed out loud! Did the same thing to my z390 aorus.

I admire the patience!

SILVER LINING: Customer has learned a invaluable lesson... 1st hand. S/he will never make that mistake again. And will use this experience to help others in the future.. :) Thank you.

Nice work mate!

I've bent a few pins (around 3 or more) when cutting a LGA 775 socket to fit a 771 Xeon CPU. Managed to straighten them with the same scalpel blade with my naked eye, no magnifiers and such. The CPU worked for whole 6 years no problem until I've upgraded :)

@itchytastyurr

Жыл бұрын

you can cut pins to make a non compatible cpu work with a mb by cutting off pins?

@tomclanys

Жыл бұрын

@@itchytastyurr no, you need to cut out the socket holder so you can insert the CPU rotated by 90 degrees, together with gluing a tiny pad that switches two pins around. That's in case of 771 cpu in 775 socket. Then you need to update the bios (in my case add the microcodes) so the cpu works 100% correct

Damn, im holding my breath watching this video like a bomb is being disarmed infront of me...

I have an Asus TUF Z390 GAMING PRO with the same bent pints. Watching as I'm working on it. I don't have microscope do have to rely magnifiers (one manual and the other is a magnifier app for iPhone lol. With image stabilizer and front flashes on it does a very decent job but not as clear a vision as you guys. I use tiny needlenose pliers, a mechanical pencil with lead removed and some sewing needles for leverage. So far so good, thanks! 👍

Good vid showcasing the labor intensive pin repair service. There is a aftermarket replacement socket available for like only $5-8 USD for the intel sockets but I think you need a BGA machine for it and I think the machine is expensive if I remember correctly. I think the Ryzen sockets are about the same price but AMD socket was easy to repair. I had checked not too long ago after I bought a motherboard that apparently had a broken socket for AM4, ended up RMA'ing it though, luckily.

@NorthridgeFix

5 жыл бұрын

It's not worth the time or labor to change the socket. This is a special case where the pins are badly damaged and unbending the pins took some patience due to how fragile they are.

Maybe you must have to heat the pins to the medium temprature so its little bit easy to fix and decrease the chances of braking pins

Congratulations Sir.. Very nice work. Bravo. 👍👍👍

🇩🇿انت فنان كل. فيديو تتعلم منك .اكمل عملك وخلي الدعم علينا

maşaallah nice video thenkyou.!

Nice job again like always

you saved my pc good job

this video is so relaxing

I love the honesty and patience in this video and I learnt a lot. Thanks

On the ajustment the most important is match the vertical and horizontal lines, The exact shape is almost impossible make again. For test pc parts u need one ram and a cpu listed on QVL in oficial site support.

I like he goes to answer the phone... Boss move mate

Awesome precision. Only wished he could have installed the CPU to see if all the straightened pins worked?

Great effort Sir 👍

Nice work.....❤

Merci pour ce vidéo c'est très important et excellent travaille

Excellent job !!!

I use needles to fix this sort of issue and it is very effective because with needle you apply less pressure and you have more control on bending them without breaking the pins.

I really like such videos. I am your new subscriber !

My worst nightmarish bent pin repair was when I had to solder a new upper 3 quarters of a pin on a remaining quarter of the broken pin. Cut a new pin to fit the missing part, used a little bit of solder paste and a hot air station. I wish I had a stereo microscope to be able to work such fine interventions.

@LPgmxDan

4 ай бұрын

Those are metal? What c did you use to solder them together

Socket 1151 Rev. 2 is basically a new socket that just happens to have the same physical layout.

There's some kind of little hairball at 13:44 rolling around near the tweezers, and I was hoping so hard he was going to pick it up and remove it, but then he does not. :(

Finaly a👍 Good Video Perfect View ho show exactly the Pins and they how they oriented Nice

See what happens when we put a 7700k on a z390 board... I'm like NOOOOOOOOO STAHP

@nhansgoofyvideos7581

3 жыл бұрын

It could work with a modded bios though. The 1151v2 is *almost the same to the 1151v1. There are some cross-compatibility with 4 cores chip. I3 8100 could be used in modded 1151v1, nothing should stop the i7 7700k to work on z390 other than bios microcode.

I made the exact same mistake trying to clean paste with a paper towel. Fixed it the same way using my hundred dollar Amazon special microscope :-) lesson learned. I was glad to hear that there are redundant pins.

Frikin surgeon :D love you man

C'mon, everyone knows your supposed to clean that paste off with a hammer and chisel

Had to correct a single bent pin on one of these CPU sockets once, had no fancy equipment, so had to zoom in using my phones camera and use a scalpel to correct it. Was very fiddly, but I managed it thankfully.

I was holding my breath the whole time he was repairing the pins hahah

Oh, man... I had z97x gaming 7 that tried to take out the fallen dust with a brush and bend 20+ pins like that... I was about to cry... Than I got $15 digital microscope, connected to the TV and bend them back. First it didn't work properly, than after further check they need to be completely in the right angel. That sht took long but I managed it and used that board without any issues over a 6 month and changed my system. 😎

Connecting that PSU almost shuts down your camera mate, check it if you don't believe me. :)

Excellent ☺️ 🌹🌹

That board was $369 in Nov 2019 and a similar thing happened with me with the socket not holding the CPU in place while cleaning & reapplying 30 month old thermal compound off the fan & CPU lid

Keep them warm before bending back. So chances of breaking will much less.

@SloGhost

3 жыл бұрын

actually not true, hot parts are easier to break

@manjifera

3 жыл бұрын

@@SloGhost its metal metal tends to bend as atoms become free cos of energy. With cold bending it forms stress on atoms and they gets break without bending.

@217agomez

3 жыл бұрын

He’s right hot / warm metal is more malleable / flexible when heated to the right temp.

@TomStorey96

3 жыл бұрын

It's called annealing. The question is whether you can heat the metal to the correct temperature without melting the plastic of the socket or setting something on fire. Many components intended for reflow soldering can withstand 200-300 degrees for a minute or two for the reflow process itself, but annealing could require hundreds more.

@timtim4726

2 жыл бұрын

@@TomStorey96 there's one more thing, if pins are heated to high temperature then solder could melt and pin picked out of the socket accidentally. OR the pin can be unsoldered, bent to the right shape and soldered back.

Hello great content. So the pins are not usually straight right because I have the same motherboard and I see that the pins are not straight and I was wondering

Doctor of any Hardware

Test passed ! you can work in a bomb squad. Incredibly exciting.

if there must be a cleanup be done around the socket it would be wise to put the plastic shield back in the socket to protect the pins, lesson to the customer ;)

omg im so happy when i did that, i cleaned it with a tooth brush and IPA

Saludos que tipo de microscopio usas una de lente de 900x excelente video ojala puedas ayudarme estoy por comprarme uno ...

I have the same board but some pins were even broken off. I managed to fix it in the worst way possible. Salvaged some pins from another board, cut off the bottom part, slide it against the broken pin and secure it in place with a cut off piece of a leg from a resistor. It is working great now though.

@prashanthb6521

2 жыл бұрын

How did you even manage it ! Mine is not booting even after straightening them.

@mrawesomelemons

2 жыл бұрын

@@prashanthb6521 The trick is to look at the heads, not the legs. You need different orientations and light source directions to arrange the heads in the grid correctly again.

@blazeaglory

2 жыл бұрын

@@mrawesomelemons yes. One direction pins look fine, from another pins look bent. Also the tips of the pins look like spoons

Actually there are cpu socket replacements. Things are cheap, but replacing it is similar to replacing a gpu/soldered cpu. It needs a bga rework station.

I used to buy pallets of best buy returns, plenty of motherboards with messed up pins I fixed. I was always surprised at how often things worked with missing pins. Always wondered if there was some functionality that was missing due to it, ie some pcie channel or wouldn't work but I never noticed anything. I used to shove the pins inside a 0.3mm mechanical pencell tip to manipulate them. Kinda wonder if you could micro anneal the metal to make it less brittle but never actually tried it.

@enkur1972

5 ай бұрын

If you look at the pin out diagram of most cpu about 2/3 of pins are power and ground. So if you are lucky one of them will be PG pin and you can get away with it.

Aaahhhh do you have a Canadian friend that works up here in Canada..

Can I literally put them in place like any where I mean in symmetry but a bit differently?

great 👍

Hi, what's model of microscope do you use? Link to eBay doesn't work. Thank you

I'm here for literally the same thing. Trying to clean up some thermal paste, and just barely caught a few of the pins and bent them

Crafting / Hobby Tool - Exacto Knife helps with this problem .

Great Video! I have a dell xps studio 9100 and I notice the pins on the socket of my motherboard is bent. Because my RAM is 24g, but now is 8g. I think my fingers caught in the socket and damage the pins and I don't know what to do now. Maybe I have to replace it or repair it. But I can't repair it because I don't have a magnifer to see the pins close. The motherboard cost $189.00

Before I start such work, I reference the damaged pins & start with the least damaged pins, that are needed. If a NC (no-connection / future use) is bent, I will leave it for last.

@umutileri2261

3 жыл бұрын

how can you understand a pin is no connection?

@zadekeys599

3 жыл бұрын

@@umutileri2261 look at the diagram for the socket in question.

@umutileri2261

3 жыл бұрын

@@zadekeys599 thank you

4 years later, is it still working? :D I am wondering if it would been easier to just change the whole socket itself? There are some soldering frames one can use to solder those small connections. I saw one guy have a frame, he fixed a new socket through the board and just poured the soldering tin into the holes of the frame and it was basically done. Can't remember hos channel now though..

do we need to charge the customer if in case it doesnt work? thanks. great hands . what is your microscope model?

The whole socket can be replaced

@baconunteggs

3 жыл бұрын

How would you replace one and where can one be purchased?

@ryanbond504

3 жыл бұрын

Thats a link to a website that sells them

I had to bend some pins back on a motherboard the other day but my hands are so shaky it was like trying to play the piano with a morningstar.

can you put a blow dryer before working on the really hard pins?

A thriller especially if you have got a 2066 mobo with bent pins beside.

I tried once to fix a socket with no microscope xd it was a pain in the ass

I can't believe those frail pins don't snap when being bent like that? So, what's the cost of bending pins vs buying a new board ? Bent some of mine somehow and the shop said not fixable. Had to buy a replacement board, luck to find a used one and all good! There is a video of a guy replacing the whole socket, but I'm sure most people don't have his same gear.

would it help to heat it up a little so it bend easier with less chance of breaking

It's a good adventure.

Do you have a link to the hand tools your using?

what tool did you use?

I had this issue two pins damaged a bit and caused 3 ram slots not working and fixed it. thanks

You can also replace the entire bga socket. Did this resolves the customer's issue?

La tecnica de punta afilada tipo gancho ayuda mas ke el uso de pinzas

What Electronic-Microscope are you using? I have tried a lot of them and still can't see?

I unbent pins on a lga 1366 socket and i thought 1151 was hard till i did the 1366 because the pins are even smaller.

so after this fix , can you tell us if this motherboard work with costumer cpu or not ? thanks for video

7700K would not work on Z390 chipset. Same socket as z270/370, but z390 only supports 8th and 9th gen

I saw a video recently where someone replaced the whole socket, he did make it look simple though.

@mrawesomelemons

3 жыл бұрын

@the best Adam Changing the socket will cause a lot of heat stress to the board. And it is a very hard thing to do without proper reballing equipment which he might have but I am not sure. And you would need a source with the correct socket.

Would heating the socket help bend the pins with less likelihood of breaking?

How i just wish i could see like that

are these pins straight up or suppose to be on an angle but just lifted up to touch on an angle?

I have a socket 1366 board with one of the pin top hook bent backward on itself (similar to 6:11), it still work but only 8gb of ram is usable out of 12gb, should i bent the pin hook forward with tweezer or will it break off?

I live in the area and have roughly the same problem just not as severe only a few bent. asrock fatal1ty z97 killer lga 1150 socket. I’m curious how much you charge for your service sir.

I used to do this for a living partially Processing Amazon returns with only my naked eye and a razor blade.

@m.kaminskyte4099

3 жыл бұрын

Hi, what do you mean ? Did you purchase customer returns ?

that customer who came in felt like it was staged :D

is the microscoop you are using very expensive, what brand is the microscope