Watch my 1-Hour free webinar if you are a beginner here▶ pages.solidworkstutorials.net/comments

nice video! I like that you're straight to the point without wasting time.

Thank you. For me, the tip about editing sketch pattern was the usefull one. By the way, instead of right clicking + select midpoint, you can just select the line and solidworks allows you match center line with the point from the context menu. It is more efficient.

Sketching a rectangles center to match the coordinate system typically depends on how the part will be mated and used in the next level assembly. Both methods have their place.

Each time I learn something new with your tuto and tips. I am glad to be subscribed to your channel, Thanks Aryan.

@with-Aryan

2 жыл бұрын

Thank you for being a subscriber!

Folks, check out my SolidWorks course for Beginners. If you are ready to go all the way in one go, sign up. courses.solidworkstutorials.net/Webinar-Registration?YT&

Good,short & simple !!! Thanks a lot,

@with-Aryan

2 жыл бұрын

Glad it helped!

Arc to Line works also ("A"-key). Also, the tangency can be controlled easily. No need to press Escape. Simply return to the start point and move the mouse in a different direction. There are three solution: tangent, complementary tangent and center of the arc coincident to the line. You might want to update the video. :)

@with-Aryan

3 жыл бұрын

I feel betrayed not knowing this even after such a long time! This is a game changer haha. Thank you man, I feel like I have to give you a huge respect for this tip.

@swconsultingandtraining9100

3 жыл бұрын

@@with-Aryan No problem. You are doing a great service for beginners. If you need to refresh your tips and tricks, let me know.

@with-Aryan

3 жыл бұрын

@@swconsultingandtraining9100 i am letting you know. Give me some good tips I will include it in the next video

@Cahangir

Жыл бұрын

I feel like a newbie finding treasure, thank you both for your contribution. You can't imagine the disturbance i went through every time i had to draw a line after arc ))

I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners

What an opening 👍

Even if i wasn't learning solid works id still watch these vids. They are great

@with-Aryan

3 жыл бұрын

thanks for the feedback. Then you are gonna love the woven fence one coming soon

@anactivedesigner

3 жыл бұрын

yeah😍😍😍😍😍😍😍😍

look into the shortcut bar by pressing the "s" key on your keyboard PRO TIP: You can add the "s" key on your mouse gestures too!

Again, great video worth to watch several times. Btw, is that a component of a revolver at habit no 8?

@with-Aryan

3 жыл бұрын

It very well could be

What kind of keyboard is that I’m looking at around 4:07? Please tell me that’s a 3D motion control knob in the upper left corner of the keyboard.

@with-Aryan

3 жыл бұрын

This is a Logitech Craft. Awesome keyboard. Also the knob is customizable

Thank you!!!!!!!

@with-Aryan

3 жыл бұрын

you are welcome

Awesome tips

@with-Aryan

3 жыл бұрын

you're welcome

Yes, I'm Using Also the Hole Wizard in the sketch pattern I L💔VE It...

Very good video.

@with-Aryan

3 жыл бұрын

thanks

Do you have a video on how to make a part in SW, if you have the part in your hand and can take picture for use as a backdrop?

@with-Aryan

3 жыл бұрын

No not exactly, I could consider it tho

@objection_your_honor

2 жыл бұрын

@@with-Aryan Found a good one. titled "How to design from a picture in SOLIDWORKS" by Innova Systems here on YT. Thanks.

Hi Ryan. I greet you from Mexico. Thanks for the tips. I ask: in solidwrks, how can I constrain a reference point? That is, in a solid body I fix a reference point and constrain it, is it allowed? Can you enlighten me? Thank you.

@with-Aryan

2 жыл бұрын

im not sure what you are trying to do with it once it's constrainted cause it matters but you can right click on it and FIX it. i need more info

@alcidesgarcia7118

2 жыл бұрын

The idea is as follows: Imagine a tube with a diameter of 8 inches and a length of 12 meters. This tube is supported on its lower bed at 5 points and its upper bed supports a pressure of 6,000 kg/m2. I need to determine the reaction force at each point where the pipe rests. Now, the tube is a solid element and my idea is to place 5 reference points on it and constrain those points to obtain the reaction forces. Solidworks allows constraining reference points? And if it allows it, how to do it? I have tried it and it does not allow me, it only allows me to apply point loads at the reference points. Thanks.

I guess pros will make the very first extrude as midplane and thus have all 3 planes to their use. 5:39. Literally makes this query resolved, the next tip solved it

@with-Aryan

3 жыл бұрын

it's true. You should do that too Avito

@avitolourenco

3 жыл бұрын

@@with-Aryan yep i do do that, but suck in general, another amazing time saver is ctrl + 8. to go normal to the selected surface. helps a ton in sketching.

I'm Still Trying To Compress My File In features and Properties of the File Too... 💔

Man you are the best

@with-Aryan

2 ай бұрын

Thank you!

Actually funny. Thanks for the laughs

@with-Aryan

3 жыл бұрын

my pleasure

Sir I have question in that model. I was looking at your features bar tree of model. Sir you had used a shell command I m wondering. Sir can u tell me where you did shell command in surface command neither it has thickness nor it has solid body. Then where did

@with-Aryan

3 жыл бұрын

you can't do Shell on surface bodies

@sunnyagro3275

3 жыл бұрын

@@with-Aryan but in your surface body has shell command

@with-Aryan

3 жыл бұрын

@@sunnyagro3275 at what minute?

@sunnyagro3275

3 жыл бұрын

@@with-Aryan 1:15 minutes and 18 number feature

@with-Aryan

3 жыл бұрын

@@sunnyagro3275 look at the Surface Knit on the design tree 17 and 15 and ... on the list that have first turned my surface into solid body. That's why

Awesome😊😊😊😊

@with-Aryan

3 жыл бұрын

Thank you! Cheers!

👍

9

@with-Aryan

Жыл бұрын

9 habits?