If you brick your GPU I am not responsible. If there is any way I could help you, leave a comment and I will do my best to help with your problem.

@shawn2071

3 ай бұрын

if gpu bricked after updating the bios, can I reflash the bios again?

@MirelRC

3 ай бұрын

@@shawn2071 it depends. If your GPU has dual bios, and one of those is working, you should be able to recover it. Also, if you have an iGPU, you might be able to save it again.

Yo! Thank very much I fixed my pre-mined card! Thank God that it had dual bios! Don't stop making technical video's man you are very good at explaining!

@MirelRC

4 ай бұрын

I am glad you solved it 😀 And thanks for your appreciation.

Great video, First, how would i know if i have a modified GPU bios ?! 2nd, did you experienced any issues when you paired the RX 580 with the B550 ?! because i heard many people saying they got black screen.. Cuz i have an RX 580 and I'm about to buy the rest parts, same like yours (B550 + R5600) so i just want to avoid issues. One more thing, did you faced any problems when you installed Win 11 ? Thanks in advance.

@MirelRC

3 ай бұрын

1st Q: It is a bit hard to tell if it is 100% the original bios on it. But usually, I am looking for the GPU Core Clock and Mem Clock in GPU-Z software and then I compare the clocks to the ones that are listed on manufacturer website or Techpowerup spec page of that GPU. Also, when you go on Advanced tab on GPU-Z you will havedrop-downown menu‚ there you have to go to AMD Bios. And here you will have a Part # from what I've seen with recent GPUs from Sapphire‚ that doesn't match with the one that is labled on the GPU's shroud sticker. But you might check that one too‚ if they match and the clocks matched with the ones specified by the manufacturer it is 100% the OG bios. If the clocks match but the Part # doesn't it might be a different one or not (as in case of Sapphire's more recent GPUs). 2nd Q: With my Ryzen 5 5600g I haven't encountered any compatibility problem when pairing it with RX 580 and my B550 motherboard (at least not while using the standard bios/quiet bios‚ with performance bios I had some weird problems and I am not sure if it is caused by my B550 motherboard or some weird mismatch with the Performance bios that I have flashed). Also, in some cases it might happen that some motherboards would not fall back to PCI-e Gen 3‚ and could cause a handshake problem with the GPU. In my case this doesn't happen as 5600g doesn't support PCI-e Gen 4. 3rd Q: With Windows 11 I have a mix experience. But While using RX 580 + 5600g I haven't encountered problems. Except in 2022's winter when there was a weird problem with Windows Updates forcing a certain AMD Driver that wasn't compatible with Radeon Software that was installed with the Drivers I have installed from amd.com. And a few months ago when I have used it for the last time‚ it worked perfectly fine with the latest driver from AMD website‚ and Windows didn't force a different driver on it. Also, when installing Windows 11 (if you don't use certain tricks to configure it without an online account)‚ setup with your Microsoft account‚ do the basic preference settings. And then when you get for the first time to the desktop‚ go to Windows updates and check for new updates (or it will check automatically). It should find some AMD drivers also. Let them install and after that restart your PC and go to amd.com and from here download AMD chipset drivers and AMD Graphics drivers. Install firstly the Chipset Drivers‚ restart PC‚ install RX 580 drivers‚ restart PC. And from here you'll have to install the rest of the things you need and want.

Thank you bro ❤❤

@MirelRC

Жыл бұрын

You're welcome. ❤️

FYI, latest version of amdvbflash cannot detect the sapphire 4gb version.

@MirelRC

10 ай бұрын

Interesting. Mine is 8GB and somehow it did work with the version I have used in the video.

I got an error 43 with my XFX RX580 2048SP 8GB. Maybe it was because the only BIOS on techpowerup was unverified?

Good video thank you!

@MirelRC

Жыл бұрын

I am glad that it helped you :)

@karstenswiridjuk4747

11 ай бұрын

Hey with a dual bios switch does it matter which mode it is set to when you do this? I have a sapphire rx590 GME I bought used with a janky bios and an almost impossible part number to find the right bios but I did and this worked perfectly, before I had tons of black screens off and on, now it's better but still...once in a while it still does it, but much much less, card is much more stable any experience with that?@@MirelRC

@karstenswiridjuk4747

11 ай бұрын

Eureka! AMD black screen issues solved. Making a custom resolution and just matching it to whatever your monitor is, mine was just set already properly, and CHANGING that 'CVT' to reduced buffering totally cleared up my problem, 0 black screens. kzread.info/dash/bejne/hq58pMVqYKnFlrg.html

is there any way to check what bios version do you currently have? i bought a used rtx 580 that turned out to have been used for mining but im not sure that i should be taking the risk (because there always is some) of flashing a new bios. besides, my model (sapphire nitro +) has dual bios, presumably at least one slot would be left untouched?

@MirelRC

3 ай бұрын

You can check the clocks with GPU-z. The bios version seems to be the same between different versions of Sapphire Nitro+ (even though some might have 4 or 8 GB or higher clocks). One bios would have a silent profile and the other will have a performance profile (or OC profile; each manufacturer calls it a bit different). But in case of Sapphire‚ the Performance bios is the one that has the higher boost clock that is marketed on their spec page. So, for an RX 580 Nitro+ the performance bios should have a boost of 1411 MHz and the Silent bios should have a boost of 1340 MHz. Before flashing anything, I recommend you to make a backup to the bios you want to overwrite (to flash over the new bios). If the other bios is untouched by the guy that used it for mining‚ use that other bios as there isn't a big difference between them. To switch between bioses you can flick that small switch in the opposite direction.

Thank you

@MirelRC

Жыл бұрын

You're welcome

How to fix error reading from ROM

Hey, I have RX 580 and I do this on my card but when I restart my pc it dont come up and I dont had screen... so I shutdown pc using power button and switch my card bios (it is xfx rx 580 8 gb with dual bios) and system come up. but problem is I donno how I can flash that bios again without flash this switched bios because if I lose this bios too I cant do any thing. plz help me. anyway my problem is when I buy card I find out a minig bios is installed on both card bios and I cant install any version of AMD adrenaline driver so I see ur solution and do it.

@MirelRC

8 ай бұрын

To flash the bricked bios‚ you either have to use an iGPU (if your CPU has any) or as you said‚ power on with the "working" bios and while booting flip the switch on the broken bios. Before flashing make sure to check your exact model of RX 580. I know there are some different models of XFX. You can add me on discord and I am gonna try my best to help you. Discord: mirelr My nickname is Onlione and I have a pfp with one of those black guys that was doing the coffin dance.

so my 1070 when idle memory core going 4004mhz in powertech say 2002mhz? in my cpu 2002mhz that normal or ex mining?

@MirelRC

4 ай бұрын

If you idle, the core clock and mem clock will get lower to save power. When it is in use, the mem clock should be 2002, and the core clock will depend exactly on your model's capabilities.

I get when doing -fp "SSID mismatch ERROR 0FL01"

@MirelRC

7 ай бұрын

What model is yours, did you bought from it from China? Can you try to save your present bios and try to flash it to see if it says the same error?

How to check if my second hand gpu use for minimg?

@MirelRC

7 ай бұрын

The only way I know is to use GPU-Z. There are 2 ways of telling that. One by looking at clocks: GPU clock Memory Boost All 3 should match what the values your model has specified by the manufacturer. And a second thing would be by pressing on "Lookup" button on top right in GPU-z. Also, I think that there could be another way of checking if the GPU has S/N or P/N written on it and then check the S/N or P/N with amdvbflash GUI tool.

I have same problem with my Asus RX 580 8GB mining edition with only DVi display port, it turns off display and the GPU fans stops while the CPU fan is still running….. I don’t know if I flash a new bios it will solve the problem

@MirelRC

7 ай бұрын

Well, I don't have any experience with those Mining Edition. But before doing anything with it‚ back-up your BIOS‚ you have many ways of doing that. I would suggest to make 2 or 3 back-ups‚ one with GPU-Z and one with amdvbflash software. Then you have to watch for the specs of your GPU in GPU-Z. The most important being the Memory vendor and Shader count. If you have an iGPU in your PC it would be even more helpful in case the thing will not gonna display. After that you'll have to find a bios for Asus RX 580 GPUs with the same Shader count and same memory vendor. I hope it will not gonna be a hustle to do that‚ as some Mining GPUs have some "protections". I would suggest making a post on techpowerup forum. There are some awesome guys that know more than me and they have more experience with those mining GPUs.

@dennis5909

7 ай бұрын

@@MirelRC thanks I’ll try if I can get it to work

So i have a XFX rx 580 2048SP 8GB, i suspect before i bought it, it used for mining For some reason the display is not quite right, it has random tiny green dots showing up but popping out randomly like tv noise when not picking signal right and quite a lot, not obvious because its so small, but when the screen show darker image its much more noticeable Is it on the mining bios possibly? Should i reflash it?

@MirelRC

3 ай бұрын

I am not 100% sure in this case. Sometimes‚ wrong frequency can make the GPU show artifacts. Sometimes it could be a sign of its end being closer. Though could you tell me what clocks do you have on this GPU?

@linggarprasetyo4201

3 ай бұрын

@@MirelRC i think its on 1286mhz, memory clock is 1750mhz I cant recheck it because i'm on a business trip right now Is it possibly a dying vram too? The only problem i have when gaming right know is when its playing mh rise, first loading cache make it flickering black like crazy and For now i'm just suspecting its not on the original bios How do you know if its not on the right bios?

@MirelRC

3 ай бұрын

​@@linggarprasetyo4201 It is a bit hard to tell if it is 100% the original bios on it. But usually, I am looking for the GPU Core Clock and Mem Clock in GPU-Z software and then I compare the clocks to the ones that are listed on manufacturer website or Techpowerup spec page of that GPU. Also, when you go on Advanced tab on GPU-Z you will havedrop-downown menu‚ there you have to go to AMD Bios. And here you will have a Part # from what I've seen with recent GPUs from Sapphire‚ that doesn't match with the one that is labled on the GPU's shroud sticker. But you might check that one too‚ if they match and the clocks matched with the ones specified by the manufacturer it is 100% the OG bios. If the clocks match but the Part # doesn't it might be a different one or not (as in case of Sapphire's more recent GPUs).

@linggarprasetyo4201

3 ай бұрын

Ok, i'll try it when i get home, Thank you

Hi, how do i know if i have mining or gaming bios on my gpu

@MirelRC

7 ай бұрын

Try to use GPU-Z from techpowerup. Then press on lookup button. In theory, it should send you to an official specs page from techpowerup for your GPU. And at the same time, GPU clock and GPU mem clock should match the ones specified by your vendor.

Hey guys I don't know why but my hackintosh doesn't see my used GPU that I've buyed from an used store, the card was from a miner I think because on windows works fine but on hackintosh not. The Rx 580 is a compatible 100% hardware for hackintosh build. I think there is a custom Bios on it which it may the reason why on macOS the card won't work and I get black screen or freezed, this video can go back to original stock BIOS of the sapphire RX 580 8GB? Help

@MirelRC

8 ай бұрын

It is a Sapphire nitro? If yes can you try by using the secondary bios? Some miners just flashed only the performance bios. Also‚ you can use GPU-Z to watch what frequency you have for GPU and VRAM. www.techpowerup.com/gpuz/

@manueldeangelis161

8 ай бұрын

@@MirelRC Hi thanks for responding and yes it's Sapphire nitro 8GB model so I need to click there my GPU model to know the info?

@MirelRC

8 ай бұрын

@@manueldeangelis161 with GPU-z you can see some info of your GPU if you press on Lookup button it can send you to a techpowerup page with specs of your GPU. If the page says something like unknown model or something like that 100% there is a custom bios flashed. And default clocks for OC'ed bios (or performance bios) should be 1411 for core clock and 2000 for mem clock. On silent bios core clock should be 1340 and 2000 for mem clock.

hello. and why does it say error if the model absolutely same? like i chose exactly my model sapphire rx 580 pulse 8 gb

@MirelRC

3 ай бұрын

It might be an S/N mismatch. Or something else isn't working correctly. I can recommend you go on the techpowerup forum on the AMD/ATI section. Some cool guys could help you furthermore.

@user-cl8vn1mz5w

3 ай бұрын

@@MirelRC Thank you!

How do i know if my card bios has been changed?

@MirelRC

3 ай бұрын

It is a bit hard to tell if it is 100% the original bios on it. But usually, I am looking for the GPU Core Clock and Mem Clock in GPU-Z software and then I compare the clocks to the ones that are listed on manufacturer website or Techpowerup spec page of that GPU. Also, when you go on Advanced tab on GPU-Z you will havedrop-downown menu‚ there you have to go to AMD Bios. And here you will have a Part # from what I've seen with recent GPUs from Sapphire‚ that doesn't match with the one that is labled on the GPU's shroud sticker. But you might check that one too‚ if they match and the clocks matched with the ones specified by the manufacturer it is 100% the OG bios. If the clocks match but the Part # doesn't it might be a different one or not (as in case of Sapphire's more recent GPUs). In case you didn't understand‚ I can give you my discord and we will talk a bit more there.

Yo what I select for a surallow rx 580 8Gb?

@MirelRC

4 ай бұрын

Is it from China?

Hi i got a question i got an rx 580 sapphire nitro + 8gb am i broke the bios switch and now its stuck on the normal bios, and i want to flash the bios to the 1411mhz like the other bios, you think this is a good ideea?

@MirelRC

Ай бұрын

It should work but in case of instabilities, or even flashing the wrong BIOS, I recommend you to have an iGPU or a secondary GPU to be able to flashback your RX 580 in case you get no output from it. Don't forget to make a backup to your present stock BIOS. Also, if you're skilled at soldering, try to replace the switch.

@tonvado

29 күн бұрын

I'd suggest using the 2.93 version, since the rx 580 is an old card. I force flashed mine using it, now It's working great. If you're not having any issues with the quiet bios then I wouldn't recommend flashing them to the performance ones since there's not much of a difference.

I buy an rx580 4GB(sapphire nitro) on e bay , all work (video streaming,browser)but when i run game pc freeze and black/green/etc screen. Windows does not detect any errors on the video card but I noticed that on the AMD program if I go to GPU tuning the maximum frequency is set to 1100 (approximately). Could this be a sign that the card has been flashed in a mining bios? Thanks if you answer

@MirelRC

6 ай бұрын

Pretty much. OC or Performance bios should reach around 1411 MHz while boosting. The base clock is 1257 MHz. I am not sure if the 4GB model has dual bios, but you can try the other one if it has a bios swith, maybe it has the second bios untouched.

@SanderSonic

6 ай бұрын

@@MirelRC i have the switch button,but I was afraid of doing damage by moving it? Do you think that would solve the problem?

@MirelRC

6 ай бұрын

@@SanderSonic Well, if the second bios isn't modified, it could be an easy "fix".

@MirelRC

6 ай бұрын

@@SanderSonic kzread.info/dash/bejne/gJOivNufqZWwdag.htmlsi=5wYEU1qK7yXYKhlA

@SanderSonic

6 ай бұрын

@@MirelRC ok man,tomorrow i try and i update my situation..thanks for tips

Bro i bought a asus strix 1070 . But its rgb lights not tuning on . I think it used for mining and all lights turned off by miner because heat problems . Can i fix this flashing my gpu bios

@MirelRC

8 ай бұрын

Firstly you can check if your VGA bios is flashed. Get GPU-z to check the clocks: -gpu clock (base) should be for you 1506 MHz -boost clock should be 1683 MHz -mem clock should be 2002 MHz (8Gbps effective speed) And you can press on the lookup button on top right. If that button sends you to the right page of your GPU‚ it should be alright. BTW try to check the RGB connectors to see if there is any cable disconnected. If not I recommend you to try to use SignalRGB‚ as with Asus software I've had badluck until now.

@gamerzone_lk

8 ай бұрын

@@MirelRC 🌼💙

@MirelRC

8 ай бұрын

@@gamerzone_lk is your GPU alright?

Hello everyone I bought mined xfx rx580 it's already have mining bios.. when I run furmark at 1380x720 the temperature is rising to 85c° it's normal ? if i change thermal paste it's gonna be ok ?

@MirelRC

8 ай бұрын

It is ok. It's a safe temperature. Usually, XFX RX 580s tend to go with higher temps. You could try to replace the thermal paste. Make sure to measure the pads that are on the memory‚ in case if they will break‚ you'll have to replace them. Also. What clocks do you have on your XFX?

@UltraNoob_06

8 ай бұрын

@@MirelRC core clock 1366 to 2000 memory clock 1366 to 2000 texture fillrate 196.7 GTexel/s

@UltraNoob_06

8 ай бұрын

it's good ?

@MirelRC

8 ай бұрын

@@UltraNoob_06 did you flashed a "stock" bios? Those are stock values.

@MirelRC

8 ай бұрын

@@UltraNoob_06 yes. If drivers work without problems. This should be a stock bios. You could check the second bios if your model has dual bios. maybe it was flashed only one bios.

I still get the same error doing -fp

@MirelRC

7 ай бұрын

Does it say something like P/N mismatched? BTW, what model is your GPU?

vbios related functionality not supported for device 0x67df I got this error, please help

@MirelRC

10 ай бұрын

Do you get that error while flashing? Is your GPU bought from used market?

@Rafaelblancomonroy

10 ай бұрын

@@MirelRC yes, after try to install, then dont install the bios, yes i bought used this week

@MirelRC

10 ай бұрын

@@Rafaelblancomonroy can you tell me what model it is? I am trying to do a bit of research on forums. As I don't know exactly.

@Rafaelblancomonroy

10 ай бұрын

@@MirelRC sapphire rx 580 nitro+ 8gb 1411 x 2000 MHz ID device 67DF BIOS NUMBER 113-1E3660U-O51

@MirelRC

10 ай бұрын

I want you to check 2 things. What VRAM manufacturer do you have on your RX 580, and tell me if you were trying to flash the bios on silent mode or OC mode. Silent mode means that the bios switch is towards GPU I/O. OC mode means that the bios switch is in the opposite direction of I/O.

I could not find the right graphics card on the site

@MirelRC

3 ай бұрын

What model do you have right now?

@medklom

3 ай бұрын

@@MirelRC amd radeon hd 8670m

@MirelRC

3 ай бұрын

@@medklom 8670m? That's a laptop GPU. I don't think TPU has bios for that one. Also, does it have any different bios? Like the mem clock and core clock are different from what those should be?

@medklom

3 ай бұрын

@@MirelRC I just want the BIOS to read the graphics card but it is blind to it so I wanted the GPU BIOS

@MirelRC

3 ай бұрын

@@medklom sadly I can't help you with that. I can advise you to go to techpowerup forum and make a post there. There are some awesome people.

I did get information Flash already programmed ? So its done or ?

@MirelRC

Жыл бұрын

What version of AMD vbflash have you used?

@mariuszstrzelecki3490

Жыл бұрын

@@MirelRC i tried the newest one then the same as you one and also the 2.84 and there is only 1 bios for MSI rx 5500xt 8gb mech oc. And it was saying this version is already instaled. So i did instal anyway by forcing to update anyway but after that card does not work like before i was trying everything still same error and windows is disabling this card with error 43. I did uninstal 10 times drivers and instal again and even tried in different PC still nothing no clue how to fix this card.

@mariuszstrzelecki3490

Жыл бұрын

im just going tomorrow to return to shop this card. And tell them its broken because no idea what to do else. Drivers arent working at all. Nothing works.

@MirelRC

Жыл бұрын

@@mariuszstrzelecki3490 that's unfortunately. I hope you'll get it solved.

@MirelRC

Жыл бұрын

@@mariuszstrzelecki3490 try with 4.60 and take a look here. Maybe there is something a little different than what I was doing www.techpowerup.com/forums/threads/problem-flashing-gigabyte-rx5500xt-4gb.283036/