RV Slide Outs BAL Accu-Slide Rollers to ASSIST the Wear Bar and things to consider...
We are installing rollers to help ease the load and pressure on the wear bar on our RV slide outs. There is no perfect solution to this as it really needed to be an install at the time of manufacture. With that being said...I think these added rollers will help a ton.
Thanks for watching!
NOTE: Follow these links to see what is available, but you should call your OEM supplier and ask what size you need. In the end, you need to know what size wear bar you have and the geometry of the mounting brackets.
Link to BAL OEM 1/2 inch rollers: amzn.to/3xWlK9O (part number 854304)
Link to 3/4 inch rollers: amzn.to/4b9X8Zo (part number 854303)
Пікірлер: 10
The rollers look like they will last as long as the camper and a lot less friction then the wear bars. Have a great weekend Pm! See ya!
@pmtips4482
7 ай бұрын
I'm sure hoping that's the outcome! Time will tell. Thanks for watching and have a good one!!
WOW KEITH DROPPING IN, YOU ARE DOING A HELL OF A GOOD JOB ON THAT. THAT IS A LOT OF WORK. KEITH FROM KK MOYION PICTURES
@pmtips4482
5 ай бұрын
Thanks Keith! Have a good one!!
I know you have a Bal slide I wonder if Lippert has done this as well. I of course have a Lippert and it is doing the same on one edge of the slide.
@pmtips4482
7 ай бұрын
I would contact Lippert and see if they make any rollers for their slide install. In my research, I found several different styles but only a couple would work correctly. Thanks for watching and good luck!
Should have just put the piece you cut out back and then screwed it back together as one piece.
@pmtips4482
26 күн бұрын
Thanks for watching and commenting!
What is the part number for the rollers?
@pmtips4482
3 ай бұрын
You should research exactly what you have and what you need. Call BAL and talk to them. Mine are # 854303 which is a 3/4 inch roller. The thing with RVs are the thousands of different parts and part numbers used on very similar models. Good luck! Thanks for watching!