Day 49 of asking Cleetus to put rocket boosters on Leroy and go to the moon

@PreachedCloudz

2 жыл бұрын

😎

@darkwingduck7247

2 жыл бұрын

@SpongeBob wow ❤

@samljones

2 жыл бұрын

You better do it, side by side moon wheelies with Kyle's MR2?

@tonisara2950

2 жыл бұрын

@SpongeBob 👍

@muhammadjalal2335

2 жыл бұрын

(◕ᴗ◕✿)

the humility is second to none with you three, never change

@richardfitzwell6579

2 жыл бұрын

My man!

@FishinWithAlex

2 жыл бұрын

@@wiawii I think he was talking about sloppy mechanics…

@zzzxxzzz3248

2 жыл бұрын

Bet they forget to put transmission fluid in like they did with mullet ! Actually diff fluid with mullet but close enough !

@Only10re

2 жыл бұрын

@@zzzxxzzz3248 oof

@user-qz8ye9ij2n

2 жыл бұрын

“Griffin”

Cleetus has missed the oil line for the turbo for almost every first start since the channel started

@mattwilcox8134

2 жыл бұрын

Pretty much tradition at this point. The first one he gets it right, the motor will probably blow

@ryancrazy1

2 жыл бұрын

every time he does a fire up after putting a turbo on, i think, "I wonder if he hooked the oil lines up...." thought he might have actually remembered this time

@rhiley36

2 жыл бұрын

no he remembered the last time they threw the engine together

@adamscheelar9614

2 жыл бұрын

@@rhiley36 okay then he remembers 1 out of every 10 first starts. Lol

@mikeymasi

2 жыл бұрын

Roman knows a thing or two about messing up oil lines and filters for first start 🤣

when u guys find cracks u should drill each end to prevent crack from reforming, pretty much removes the tear and gives it a edge to prevent further cracking.

@thomgt4

2 жыл бұрын

If you weld a crack you're completely melting the metal, not really much use in drilling the ends. Backing gas will be a lot more useful in preventing cracks

I can't believe you let a squirrel loose underneath Ruby's Hood and it actually cleaned up the wiring instead of chewing it.

@MarkVaughnLive

2 жыл бұрын

Hahaha this.

@chrishenry571

2 жыл бұрын

This is one of those golden comments that is both precise and accurate. Well done, sir.

Hey, we got the Jet Boat content to make up for any lost Sand Rail content, so I'm just excited to see Ruby get some Love! She's what brought me to the channel when you went to the auction and found that old truck motor in her. Crazy to see her now...

@agnez______9956

2 жыл бұрын

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZread: This is fine Someone: Says "heck" KZread: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

@jimmyellison2766

2 жыл бұрын

same here that's what got me here

@creativeusername4912

2 жыл бұрын

I dont remember what brought me here I know I was here the day he bought Leroy

@austinmiller8695

2 жыл бұрын

Seriously!!!!!! 😎😎😎😎

@donaldduck9493

2 жыл бұрын

Jet boats in the sand dunes? Sounds like something WD would do tho.

This is literally like the 3 rd time they’ve “learned” their lesson about not leaving ignite in the injectiors lmao this is why we fell in love with the channel guys keep on keepin on

@nate0765

2 жыл бұрын

And all the times they accidentally forgot to hookup the oil drain on turbos, he could've cut all that out. The fact that they can laugh stuff like that off and leave it in the video is why I love this channel.

@michaelschwartz812

2 жыл бұрын

Got that stupid money

@ichoozjc

2 жыл бұрын

And about a million loose bolts 🤣

@mikeymerrett

2 жыл бұрын

😂keep on keepin on hahahahaha

@grantsdad177

2 жыл бұрын

Ethanol is some nasty stuff that’s why you should typically use non ethanol in stuff that sits like small equipment, generators, boats, etc

The face old cleeter made when he flipped the camera around while talking about George and the wires to jack stand Jimmy had me in tears honestly thats some good content can't wait to see ruby back at the track favorite car in the fleet

@imacatnotaraccoon5656

2 жыл бұрын

Dude we have all been there. That’s what made me laugh so hard

im a simple man, i see cleet video, i click like.

@TheTheomax

2 жыл бұрын

you and me both

@theeturnone

2 жыл бұрын

#MeToo

@eriklarson9137

2 жыл бұрын

HASHTAG

"We had a meeting and decided to take weight off Ruby's nose... " Let me guess, that was Jackstand's suggestion...

@ziiofswe

2 жыл бұрын

His new name is Wheelstand.

George fits in so well with you guys! So glad he's part of the crew.

@garyhost354

2 жыл бұрын

Yes I like the handsome Mexican guy

@garyhost354

2 жыл бұрын

@Erikk Hyndman the problem with Mexican is there is always some nuggets when you pull out. I think it’s the diet

Really missing the ruby and Leroy vids. 6 speed manual passes in Leroy are sick

@kevinparker9932

2 жыл бұрын

True that!

@eriklarson9137

2 жыл бұрын

*4 speed.

Please build Ruby and Leroy with Drysump pump this time. Im guessing some of the bearing damage is because of oil stavation due to high G Forces.

@rustysausage69

2 жыл бұрын

+1 to this

Cleetus might be partnered with Motion Raceworks, but he’s definitely keeping the lights on at Texas Speed 😂

@timothywarehime5956

2 жыл бұрын

I don't think they have a problem keeping the lights on down there. well, except when it snows.

@zachheath6821

2 жыл бұрын

@@timothywarehime5956 it was a joke, based on how much they send engines back and forth

@pilwetty2061

2 жыл бұрын

@@timothywarehime5956 damnnnn underrated comment award!

I love Leroy and Mullet but Ruby sure has a special place in my heart. May be because Leroy is what brought me to the channel but I watched the Episode the day it came out they got Ruby. Kinda nostalgic.

@scott9688

2 жыл бұрын

If I could like your comment a 100 times I would...I'm not even a big car guy but for some reason Ruby took my heart!...

@EdwardVarner

2 жыл бұрын

Same, but don’t get me wrong I love Leroy too.

@demigod4343

2 жыл бұрын

kzread.info/dash/bejne/p6BmuduOcridiLQ.html

@rhadiem

2 жыл бұрын

Same. Love Ruby but Leroy is still my fave. Needs some upgrades and tlc.

Finally an old fashioned build video. Need more like these. I was getting gills from all the boat videos

@eriklarson9137

2 жыл бұрын

Yeah. Cleet asked recently about what type of content we want. I would be more than happy with unedited, or minimally edited content with just George and Jackstand. I am a simple man. I mean, Cleet is the main dude, just saying Jimmy and Squirrel are plenty entertaining. Lol.

"With a secret engine never intended for her" Have Ruby ever had an engine intended for her?

Jackstand "Its not a dam scramble button" haha Made my day. Cleetus just about pushed it through the Dash

So thankful to see ruby getting much much much deserved love, she’s is the only one who doesn’t let us down! Put that love into Leroy! I’m an og here, I like mullet but our og cars need love!!!

@austincooper566

2 жыл бұрын

Forreal though!! When was the last time you seen neighbor?

It's good to see a decision made to invest in something that is likely to grow in value (Motion Raceworks) than another of your many toys (sand rail). I realize that this channel has as one of its primary purposes to entertain us, but you should also think about the long term. No disrespect intended by this comment.

@eriklarson9137

2 жыл бұрын

Good thing you left that comment. I don't think ole Cleet could do it without you.

@JimJamScadoot

2 жыл бұрын

@@eriklarson9137 Don't be that guy.

@Jake-ev1ju

2 жыл бұрын

@@JimJamScadoot Erik is that guy though..

@eriklarson9137

2 жыл бұрын

@@Jake-ev1ju I yam what I yam. Meh.

Back purge with argon when welding stainless. The inside of the pipe will be “sugared” which is porosity and will cause failure again.

@oscarbeltran9

2 жыл бұрын

Tell that to Jeff lutz lol

@joelfrancisco3798

2 жыл бұрын

Learned that lesson when I didn't think it was a huge deal on a preturbo crossover pipe... Pretty sure that sugar broke off and destroyed my turbo exhaust wheel 500 miles later 😂😂

@indemiks8777

2 жыл бұрын

@@joelfrancisco3798 ooh very interesting possibility

@ttv8ra23

2 жыл бұрын

No good with old dirty carboned up exhaust pipe.

@thatautogarage3644

2 жыл бұрын

@@ttv8ra23 you are correct, I should’ve specified more but I hate typing on my phone. When they made this originally I don’t remember them purging the pipe. Working on ethical refineries taught me it’s the the smallest amount of “sugar” you have to cut it out and redo it to prevent ruptures/failures in the future.

Definitely get them brakes looked over. My friend had a chute failure yesterday and went through the sand trap at nearly 180 and hit the barrier fence. Thankfully he's okay, but the car has seen better days.

@demigod4343

2 жыл бұрын

kzread.info/dash/bejne/p6BmuduOcridiLQ.html

@Matty.Hill_87

2 жыл бұрын

Good to hear your boy came out of it in one peace

@ronniewilliz153

2 жыл бұрын

Damn man. Did the sand trap slow him down at all. Glad he's alive tho.

@GTO7005

2 жыл бұрын

Sand traps suck been there done that myself

@bryanmauser9993

2 жыл бұрын

Y'all got any video of it?

The worst thing that can happen to a brand new engine is to not start on the first try. Meanwhile cleetus: “Attempt number 13” 😂

@erikj2015

2 жыл бұрын

Not when its A full Roller

@TreeOfLifeCG

2 жыл бұрын

Normal stuff for him lol

@Snarf_Le_Wombat

2 жыл бұрын

I assume they primed the oil pump but yeah terrible

@chrishenry571

2 жыл бұрын

I'm just glad he left it in the video!

George is definitely one of the best additions to the channel! He makes something that was already great, even better! Keep it up guys!

The time lapse song never gets old and I pray every night it never changes.

@coryjones6983

2 жыл бұрын

Me too brother

@shopantics7325

2 жыл бұрын

Same here!

@agnez______9956

2 жыл бұрын

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZread: This is fine Someone: Says "heck" KZread: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

@erickdunn8104

2 жыл бұрын

Lol ...it's the worst for me haha. I fast forward straight through as soon as I hear it 🤣 😂 -takes all kinds to spin the world

@BozoThaTroll

2 жыл бұрын

Reminds me of southern rock from the 70's like skynyrd or almon brothers

I love that she finally is fixed, but what about the dry sump? Thought it was determined that the old motor starved for oil under deceleration / breaking down track.

@QuantumLeap83

2 жыл бұрын

They actually haven't figured that out yet, or have ignored comments about it in the past. I've definitely tried to call attention to it. There have been a lot of us commenting on it in past videos, Steve Morris even called Tom Bailey out for it on Drag Week. I think it was the same vid on Tom's channel where they visited John Forces shop, he described it in detail, Morris said its one of the most common engine failures due to driver error. Ya gotta go to free neutral on shut down or your bottom end is under massive load during its point of lowest oil pressure. Will eventually wipe out crank bearings. Hope they catch up before they spend more money needlessly.

@rustler08

2 жыл бұрын

@@QuantumLeap83 These men forget to hook up the oil drains almost every time, I foresee them not catching it.

@jaytibby

2 жыл бұрын

@@QuantumLeap83 they'll blow this new motor out also... Just a matter of time

@EDesigns_FL

2 жыл бұрын

Dry sump is definitely the best option, but even an Accusump would significantly improve the reliably of maintaining oil pressure. Repeating the same action and expecting a different outcome is a sure sign of insanity. I've lost count of the number of engines they've damaged from oil starvation.

@stevepartridge75

2 жыл бұрын

@@EDesigns_FL I think the same thing but not much ever said about Accusump anymore.

I love seeing George so often! That man is national treasure!

watched you guys for years, absolutely love getting to watch yall living the dream. days might be long and hardships along the way but you've made something fantastic

Ruby is coming to get her top spot back! We definitely need a "here's the situation guys" shirt. Or a shirt or a sticker that says "spicy supreme" with mullet in the backround!

The chemistry.. The freaking chemistry. George is perfect for this channel.

@julioabate

2 жыл бұрын

Yeah he was definitely the odd ball at FP. He fits right at home at the Cleeter Factory

@demigod4343

2 жыл бұрын

kzread.info/dash/bejne/p6BmuduOcridiLQ.html

Loved the nod to VGG "Intake Tightener Downer 9000" LOL!!

Yo cleeter thank you for being a wonderful example of how to take care of your team. It seems like everyone is always having a good time and enjoying the work they do. That doesn't happen with out a great leader. Thanks for doing what you do the adventures you take us on through youtube are amazing and have helped keep me sane through covid. Hope you get your sand rail project back on track. It will no doubt be another amazing adventure we get to live through you.

HELL YEA BROTHER from Louisiana haven’t had power or cell service in a week but we’re alive and no damage drove 20 mins to get enough bars to watch my favorite youtubers gonna enjoy this bit of normalcy

@demigod4343

2 жыл бұрын

kzread.info/dash/bejne/p6BmuduOcridiLQ.html

@GaryLX870D

2 жыл бұрын

Hang in there buddy 🙏

@markg1495

2 жыл бұрын

God bless bro

Right on! Ruby needs the engine more than any sand rail, and the hood going back on is the right call!

@baddriversoflittlerock8359

2 жыл бұрын

Not gonna be much of a hood. Will be interesting to see what they do.

@ldnwholesale8552

2 жыл бұрын

BUT they need far less engine hanging out the bonnet to start with. As a road racer we are not allowed any engine parts out of the bonnet. Far safer.

You guys with james, an apocalypse could begin and you guys would be both still happy because you have your engines.

One of the things that makes this channel so great is the fact that you very very rarely bring up haters. Pretty cool how you just do what you do without giving a damn what some say 🤙🏻

When I was in my early 20's if I could have EVER gotten an engine to start on only the 13th try, I would have been very happy. My early builds if one started in under 40 attempts, I started getting cocky. This was way back before computer engines, when it was all trial and lots of error.

@n1umj

2 жыл бұрын

I remember being that way. lol

@rustysausage69

2 жыл бұрын

computers make it easy. but theres nothing like the satisfaction of making a carburetor work properly

NOTICE: we warned ya before, any engine that runs alcohol/methanol/ethanol (that sits alot) MUST be ran on gasoline before storage. You need to fab up a aluminum mini, hand carried tank (1/2 gal) complete with pump, fuel lines & mini 12v battery, ask any Indycar team to see theirs. Turn off the car's onboard pump while running this & have it connected to the engine's fuel rail. This will save you a ton of fueling issues.

@Sharkey_t

2 жыл бұрын

kinda hard to run a blown up engine on gas to flush the ethanol out.

@STARSHIPTROOP

2 жыл бұрын

@@Sharkey_t Mr Obvious might say no duh , but you still disassemble everything after you get back to the shop, especially concerning Toast running straight Meth

@Sharkey_t

2 жыл бұрын

@@STARSHIPTROOP methanol is a different story altogether. when i used to wrench on top alcohol stuff we used to drain the fuel at the end of everyday, pull all the fuel lines off, and fog the fuel pump and barrel valve with wd40. methanol has no sense of humor when it comes to corrosion. ethanol is a little more forgiving, depending on the gasoline content. with efi injectors its not enough to simply drain the fuel and let them drip out, if they are going to sit for a long time they should be put on an injector bench and flushed and flowed to ensure they are good when you need them.

@STARSHIPTROOP

2 жыл бұрын

@@Sharkey_t agreed, these guys haven't been around this stuff long enough to see what damage it can actually cause. its old wrenches like us to have to give them a heads up. they are not a pro team that has tons of procudures before they even hit the track. Asking them to buy a flow bench is a bit much but hopefully we can guide them to have the least amount of headaches.

@octane613

2 жыл бұрын

Who cares man. We're watching because of how these guys are, not because they're pros.

Glad you guys finally got Ruby fired up!!!! She sounds great!!!! Can’t wait to see her back out at the track running them solid 7 second passes. Also I’m ready for some more Leroy content and the bald eagle machine content been awhile since we’ve seen any bald eagle machine content

I love how everybody forgot something and you all laugh and work through it!! Great work

@altonb93

Жыл бұрын

Its always funny when that happens. Always little things and/or something everyone forgot about😂

"this shop is a geographical oddity. two weeks from everywhere!" - George

@basoncivicsi

2 жыл бұрын

He's Bonified!

@Jonboy997

2 жыл бұрын

I'm a dapper Dan man!

Air, fuel, and spark....one out of three ain't bad!

Welcome back Ruby. Great job George. You are definitely a great addition to the crew.

Georgie’s energy is such a great addition to the channel!!

@astroboy5456

2 жыл бұрын

He reminds me of a young T-bag from Prison Break

You guys are truly inspiring. I've completed DIY projects that I wouldn't have taken on prior to watching this channel. Thank you!

I’ll take Ruby over a funco buggy. Although that video of the wheelie turn was sick.

@demigod4343

2 жыл бұрын

kzread.info/dash/bejne/p6BmuduOcridiLQ.html

The jetboats and other stuf is cool to watch but this content is why i am following this channal for years now. Nice to see Ruby put back together!!

Had the headphones in and it was music to my ears to hear Ruby fire up, great work guys, nice to see Ruby getting her heart back in 👍🏼👍🏼👍🏼👍🏼🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘

It's odd but after all these years of time lapse I never get tired of the music for it. 👍👍

@c-dubmediallc4933

2 жыл бұрын

That’s funny cuz I catch myself humming the tune without even hearing it lol

@Elena-xl5dc

2 жыл бұрын

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZread: This is fine Someone: Says "heck" KZread: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

@remcovanvliet3018

2 жыл бұрын

You guys have no taste. That stupid fuckin song is the one and only thing on this channel I've come to hate with every fiber of my being.

@collinwilson2776

2 жыл бұрын

Farming Sim music🤣

@c-dubmediallc4933

2 жыл бұрын

@@remcovanvliet3018 I love all types of music. I didn’t say it was a great tune was just meaning it was catchy. And just shows how much I watch videos on the channel because it gets stuck in my head

Im so ready for some Leroy content, fingers are crossed all goes well

I am so happy to see another engine install video!!! and 25 minutes too!!!!! the best combination!!!!

Holy shit. . A shop video!!! It’s been years. It’s about time you make a video that the og subscribers wanted to see.

Glad that you added George to your team, his spontenaity is spot on!!

@Just_In_credible6

2 жыл бұрын

Yea he fits in much better with cleetus and james. He is a great addition to the channel and to the team.

Cleetus making adult life choices to grow the business is an amazing thing to see coming from doing turbo whistles in the exhaust to now

Love to see mechanical action back on the channel, you really listen to us! 🤘🤘🤘

I swear I could listen to the time lapse song they use and do nothing but smile. Everytime i hear it I know it’s this channel that comes to mind and it provides an escape.

Just got done watching one of the other vids with my grandpa. Love the vids man keep up the good work.

@BPoutdoors135

2 жыл бұрын

@SpongeBob get your bull crap stuff out of here

@agnez______9956

2 жыл бұрын

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZread: This is fine Someone: Says "heck" KZread: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

Ruby getting the love that she deserves. The new headlights really make a difference

@Keirdo69r

2 жыл бұрын

Been wanting them to get new headlights for soooo long! Makes such a difference 👌🏻

4:43 the engine isn't even in all the way and she's already pullin wheelies, Hell Yeah Brother!!!!

Glad to see her coming back together, and i am a back-purge kinda guy if tig welding manifolds etc but its cost and time. Keep up the hard work which we know you will

PUT inside now a dry sump man - it prewents bearing problem all at once

Finally can see the boys working again! Missed that kinda content!

This content is gold and so true to how things go sometimes. Great stuff guys.

I wanna work on race cars like these for a living one day, so these are definitely my favorite videos. I love to see the work behind these units!

11:55 "You are stronger than you look on KZread." George with the zingers lol.

Everyday I see George, is a day I smile.

@aaronwattam7420

2 жыл бұрын

What happened to George working with Jeremy?

@koltondilly9513

2 жыл бұрын

@@aaronwattam7420 I’m wondering the same thing

@thejmoneyshow

2 жыл бұрын

@@aaronwattam7420 Just switched just to work with the big boys

YO, I MADE YOUR PISTONS!! I'm an employee at wiseco, in mentor ohio! Anytime you're near Cleveland, come east about 20 mins and take a tour!! You can watch the aluminum slugs get punched into pistons and the whole process.

Superb! Great to see Ruby back! Thanks for sharing!

George was a GREAT addition to the channel! Kinda like Kyle hiring Wyatt and suddenly all his half assed projects start getting done top notch…

Really missed this kind of content since the channel got big, hope to see more :)

Hell yeah brother!!! I love ruby im so glad she's back! Can wait to see some rips

I have been craving ruby, Leroy, and elco content. Keep em coming please. Is why I watch!

Well i can FINALLY sleep tonight!!!...Replacing those headlight covers were the bomb!!!...i was about ready to fly 3000 miles just to do a buff and polish on Rubys old covers!!!..."CANCEL MY FLIGHT HONEY"!!

Love having George around, good choice to bring him on when the chance came up. Glad to see ruby coming back also!

@agnez______9956

2 жыл бұрын

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZread: This is fine Someone: Says "heck" KZread: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

I’m so glad your doing some drag stuff again with the og’s that’s why I started watching this especially with LeRoy

I just wish I could spend a day in that shop with you guys and watch you work and just have such a good time with one another! You can see how genuinely you guys all get along and care for one another and just hanging out building incredible cars together!!!

@mrmotofy

2 жыл бұрын

Create your own group to do the same...BE that friend people enjoy having around...don't wish to be in someone else's world it will never happen

Omg I love y’all, just true dudes . Showing true moments. Why I fell in love with Kyle (boosted bois) and this channel. Been watching since the parking lot Camaro video

When welding cracks always take a small drill bit and drill a hole at the end of the crack to relieve the stress or it will crack again and further 👍

@mayshack

2 жыл бұрын

This crack was formed at a weld because there wasn't good penetration. It's different from a casting, for example, like you mentioned where you have to drill the ends of the crack to keep it from spreading. Even with drilled holes at the weld crack, it is guaranteed to crack again in a different spot because the weld was poor. To fix this properly you'd have to reweld the whole joint, not just patching cracks and pinholes.

@remcovanvliet3018

2 жыл бұрын

Yup. And rig up something to vibrate the work piece while you weld. Greatly reduces stresses in the metal and helps prevent warping and cracking.

@369motoman

2 жыл бұрын

@@mayshack I agree it needs redone, the patch will last a little longer if drilled. I'm a certified welder and a farmer, sometimes you gotta fix it down and dirty then repair it properly later

@MJTAUTOMOTIVE

2 жыл бұрын

It needs a brace that is bolted to the engine to support the turbo. That is a lot of weight hanging off that pipe especially during a run when the pipe is red hot. And the crack should of been v notched before being welded. And back purged. The crack probably started on the inside where the weld was contaminated.

@ggss1176

2 жыл бұрын

That turbo manifold repair very sketch...will crack again v soon

Watching a Ruby video after all this time warms the heart

George is obviously a genuinely nice person it seems and great for this channels growth.... Couldn’t have picked a better person to add to the family

Loving the Valvoline hood in the engine room. Being an old school Mark Martin fan. Definitely cracked a grin seeing it.

its all good, simple mistakes, and minor issues are all part of it.. aint nothing but a thang... good job guys, good to have Georgie on the channel Cleet, glad you put him to work, what a great, humble, true American team...great to see camaraderie between the boys 👍🤘

Along with drag racing, definitely my favorite kind of content from this channel.

All prior drama aside.....Georgie is ONE HELLUVA rounded mechanic and an absolute asset to the team!!! Together with Jackstand and all bases are covered. Seems he's really shining and settled into his new position. One liners still ON POINT!!

Rubes deserved those spiffy headlights

Might be worthwhile to get an injector tester/cleaner for the shop. while its ideal to drain the fuel and run it on pump gas, its not always an option.

The kinda content I miss, and am glad to see!

Funco is the best sand car you can get. I was on their race team for years. They're really good friends of mine. Did a lot of off-road racing with them and short courses. They had a mid-engine Ford ranger and I got to ride in it when we were out testing. Something I'll never forget it was really awesome!

You guys really need to send those turbo exhaust housings out to get JetHot done to them... A nice silver coating will make them look great!!!

@Axial32

2 жыл бұрын

Or even the black jethot coating

@GolfingwithGrant

2 жыл бұрын

They should have ty weld up real nice ones for them. Then do that😂

@vandersgarage4682

2 жыл бұрын

@@GolfingwithGrant Fab up a turbo exhaust housing?....lol

@johnappleseed936

2 жыл бұрын

@@GolfingwithGrant found the casual

@tezzrterry7485

2 жыл бұрын

Gotta protect John Force's fingers too.

i love george being on the team now. Hes such a good fit.

@dirtydoge756

2 жыл бұрын

I like Georgie too, but I feel like his cracks are showing. Jeremy did a good job of hiding them because Jeremy doesn't want anyone to be shamed, but Cleeter and Jackstand will put him or anyone else on blast the second they do something dumb lmao

Heck yeah!!about time you get a rail!! 🤟🏽 can’t wait to see it on the channel!

About time you changed Ruby s lights she deserves all the love your given her with them upgrades two thumbs up love channel your on my bucket list I wanna visit the F F

Cleetus You have a fabricator so save the money and build your own sand rail it would be awesome to see on the channel. ....

@JohnDoe-er6xl

2 жыл бұрын

Please thumb this up, would be awsome project on the channel 👍

that sand rail looks so sick. would love to see that ripping in the dunes with kyles little j series sand rail and all the side by sides haha either way keep up the good work cleet

@User-sz2bg

2 жыл бұрын

It has to happen

I missed this type of content. I love these videos!!! Try to do more of them? See you guys at LS fest!!!

i know you guys cant always do this style of video, however it was a great watch, thanks for the entertainment

Great job on diagnostics. BTW, the starter had more run time than the TS 427.

Gotta do the usual. Day 48, chief needs a barra swap

@agnez______9956

2 жыл бұрын

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZread: This is fine Someone: Says "heck" KZread: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

@chloehennessey6813

2 жыл бұрын

Barras been done tho. Maybe something more- exotic. V-12. Super charged. 12+ liters.

@campbellmcgrannachan3859

2 жыл бұрын

@@chloehennessey6813 y do that to a crown vic tho? Like a barra is a reasonable engine and can make decent power and is a different engine to the usual LS of the channel

@fuzzylogic394

2 жыл бұрын

@@campbellmcgrannachan3859 there’s one here with a rolls-royce tank/aircraft engine

@beardbuilds5140

2 жыл бұрын

Barra’s are aids 🤢🤮

I'm glad you guys added Georgie boy to the channel. His energy and laugh just made the great content that much better.

You guys are absolutely hilarious to watch. You’ve come so far! Totally gives me Top Gear Vibes