Rubio Monocoat Finish Sample - Stain and Seal in 1 Coat
Тәжірибелік нұсқаулар және стиль
In this video we show you how we put together a finish sample for a client of ours. We layed out 10 different options of Rubio Monocoat finishes. As you can see, Rubio Monocoat stains and seals in only one coat. We sanded up to 180 grit, water popped the board, and sanded again lightly. We then taped off each section, and simply rubbed in the finish. We waited for about 5 minutes, then wiped off the excess and buffed it out. And that's it! The woods shown are Ash, Walnut, and Juniper.
Rubio Monocoat Colors that we used:
- Dark Oak
- Charcoal
- Ash Grey
- Chocolate
- Walnut
- Black
- Antique Brown
- Biscuit
- Castle Brown
- Oak
Follow us on Instagram @ HazelOakFarms
We sell Rubio Monocoat on our website, follow the link below...
www.hazeloakfarms.com
Пікірлер: 40
Knowing what color you used on each section would be helpful. You spent a lot of time doing this video, which is appreciated, however it doesn't help the viewer when we don't know which finish matches up with what color.
@HazelOakFarms
4 ай бұрын
go to my website I have a page dedicated to finishes and colors that I use. hazeloakfarms.com
@christinarubio9962
2 ай бұрын
Went there it doesn’t have this board pictured with which colors were used
This video had the potential to be such a great resource
would be a million views if we knew wtf was used and where! I need this haha.. ok may have to do this with Rubio...
@HazelOakFarms
4 ай бұрын
This video was slapped together years ago. go to my website, I have a whole page dedicated to the finishes I use. hazeloakfarms.com
@BilboYachts
4 ай бұрын
@@HazelOakFarmsI know.. long time ago. Glad to see you still going. Will check it out for sure. Thanks!
Good video but showing us, at the end, a close-up with the name of each color would make the video twice as good.
@HazelOakFarms
6 жыл бұрын
Hey thanks for the idea! You are right, I should have done some more close-ups after I got done, I didn't think of that. Thanks for checking out our channel!
@stephaniesapienza8949
6 жыл бұрын
Great!! But what are the RMC colors you used...?
@stephaniesapienza8949
6 жыл бұрын
(I can only see the Dark Oak and Charcoal labels on the final shot)
@HazelOakFarms
6 жыл бұрын
Hey Stephanie, ya I will update the info section with those colors. We used Ash Grey, Chocolate, Walnut, Charcoal, Dark Oak, Black, Antique Brown, Biscuit, Castle Brown, and Oak. If you would like some final pictures of the colors, I can email them to you. Just fill out the form on our website: www.hazeloakfarms.com
@davidschiller4112
5 жыл бұрын
@@HazelOakFarms But which are which? What order?
The Scotch tape company 3M approves this testing process
you didn't show the final results w/ each labeled.
@HazelOakFarms
4 жыл бұрын
Send me an email and I can send you a picture. hazeloakfarms@gmail.com
@krissyfaulkner2556
3 жыл бұрын
@@HazelOakFarms please send me a pic of the finished samples with names. Thanks!
What's the highest grit u can sand too and still use Rubio. It's for a kitchen table . Thanks
@HazelOakFarms
5 жыл бұрын
180 grit, but Rubio recommends a max of 120 grit
@BarryFromEastenders
5 жыл бұрын
@@HazelOakFarms why they only recommend 120. Surely they'd go highest they can for the better finish . How high have you gone and how did it turn out ?
@selcuk6264
5 жыл бұрын
@Hazel Oak Farms can I use 600 grits or 1000 grits sanding paper for best result? Or I can’t use above the 180 grits so why? I don’t know so could you help me ? Also could you suggest some colors for pine table top. Which colors are good on pine wood ?
@jacobcairnes521
2 жыл бұрын
@@selcuk6264 Rubio Monocoat binds to the wood grain on a molecular level. If you take it passed 150 to 180, it seals the grain and the oil cant penetrate as well as it should
The bare wood is a finish I like to call Neapolitan ice cream.
Do you use the wood Conditioner called The Cleaner by Rubiomonocoat?
@HazelOakFarms
4 ай бұрын
no, just water pop before
Are you straight sanding after orbital to avoid swirls ??
@fogsmart
3 жыл бұрын
RO sanding and resultant swirl marks are the elephant in every room when portraying finishes…
You didn’t really show the names of the stains on the board, just a quick flash, it would have been better to spend more time showing the differences on the board and name of stain, less on process.
@HazelOakFarms
4 ай бұрын
video was slapped together years ago. go to my website and you will find a page dedicated to finishes and stains we use. hazeloakfarms.com
The lack of narrative on this is perfect. Thanks for a good video and for leaving out the dribble.
your final outcome can not be seen very well
A tutorial without explanation? Oookay
Up to Down = Ash; Walnut; Juniter (Frêne; Noyer; Genèvrier) Left to Right 1:15 to 3:50 = Ash Grey; Walnut; Chocolate; Biscuit; Castle Brown 3:51 to 6:00 = Dark Oak; Charcoal; Oak; Antique Brown; Black
@MrLazysundayz
2 жыл бұрын
I think you've misidentified a few: I reckon it's 1:15 to 3:50 = 04 Biscuit; 38 Walnut; 10 Chocolate; 01 Antique Bronze; 07 Castle Brown 3:51 to 6:00 = 13 Dark Oak; 08 Charcoal; 22 Oak; 03 Ash Grey; 05 Black
We’ll That was a waste of 6 minutes
Well that was a waste of time