Rover V8 Full Service
Автокөліктер мен көлік құралдары
Decided to strip down the V8 engine in my jeep and replace the cam shaft and the hydraulic tappets along with a new set of piston
rings, main bearings and big end bearings.
It's been a year and a half since I put the V8 in the jeep and when I
did I only did a minor service so decided it was time for a full
on job.
Пікірлер: 39
I know this is 4 yrs old, but its still informative to me. Im stripping my 4.0 V8 Discovery and this is a fantastic help. Thank you. 👍
@fixitnige
Жыл бұрын
Hello Bog thx for the message That is the great thing about doing video's if it helps someone good luck with your build cheers.
About to start on mine, 1992 RRC, Thanks for the initial. break down, had to rewind afew times LOL
@fixitnige
6 жыл бұрын
Hello zarb good luck with your rebuild I hope the video is helpful. Cheers Nigel
Thanks so much for these videos, they're a godsend to me! Just about to do a complete rebuild on a new (to me) 3.5
@fixitnige
6 жыл бұрын
Hello Sean thx for the comment I hope your rebuild goes well and the video's helped. cheers Nigel
Lovely dog. Interesting to see his (?) behaviour speeded up. You probably know this but just in case, anti-freeze is highly poisonous and dogs seem to like it - got to be really careful with any spillages. Thanks for the vid, hats off to you.
@fixitnige
6 жыл бұрын
Hi Barry she is a great dog and yes I know about antifreeze and make sure she never gets near it thanks for your concern. Cheers Nigel
A lot of good info. I love your dog.
@fixitnige
6 жыл бұрын
Hello Glen thanks for the message I like to pass on what I learn if it helps others :) Our dog Jess is great she loves to watch what I am doing and be with me in my shed :) Cheers Nigel
Hello!! I'm about to build a LR v8 3.9 engine!! And I have a question!! The brand of the pistons on the left side point forward and those on the right side point backward? (LR V8 3.9) thanks
Good video thanks for making the time to do them. I lost my dog at the beginning of the year and watching these reminded me how much I miss him, he used to do the same lie down in the garage and keep me company.
@fixitnige
5 жыл бұрын
Hello NZ thanks for the message sorry to hear about your dog. My jess likes to lay on my tummy when I am under a car (trying) to fix it LOL. cheers Nigel
A BIT of a dish...? Haha. Jesus, those followers are knackered!
@fixitnige
6 жыл бұрын
Hi arebrec LOL just a bit yes they make good paper weights now :)
@scottyjones27
4 жыл бұрын
@@fixitnige is there a roller cam and lifters in newer version of this engine?? My experience most V-8's with roller cam and lifters last much longer here in the USA starting in mid 80's most our V-8's had to cause the Japan was making toyo that ran hundreds of thousands of miles , when American v-8's after 100000.0miles cam had no humps left and whacked so loud U knew the engine was trashed even with the best service!!
@fixitnige
4 жыл бұрын
@@scottyjones27 Hello Scotty this is a 1999 version it did have fuel injection I have not looked at the newer engines but this one and all before I am sure are hydraulic lifters but you can get adjustable push rods but they are just to much money.Cheers Nigel
@scottyjones27
4 жыл бұрын
@@fixitnige Thank you for your time
@kojener
3 жыл бұрын
@@scottyjones27 This motor used to be the Buick 215 from the early 60s here in God Blessed USA. In the late 60s they gave up on aluminum engines and sold the rights to Rover group. To sumarize: First Rover copied the US military Jeep. Later, they bought the rights to a the Buick motor. Later still they Copied the Ford Bronco suspension for the RR and ultimately their own Range Rover into the Glorious Exalted Defender (*). Now it seems they're completely hooked on copying, but have lost their wonderful English taste for a better product, and copy crap (new Defender).
I'm not try to tell my granny how to suck eggs, but, why take the camshaft out before the crank shaft? If you take the crank out first, you have a lot of room to control the removal of the cam, without damage to the bearings. I've been building engines for 60 years, and always take out the crank first, and on reassembly, install the cam before the crank.
Good video. But the dog is wondering who your talking to
@fixitnige
5 жыл бұрын
Hello Mike th for the comment, my I am always talking to myself and jess looks at me as if I am bonkers. When I get mad at something she comes and licks me to calm me down :) cheers Nigel
I bet your dog is called Rover
@fixitnige
3 жыл бұрын
lol good idea but no she's called Jess.
Must biggest problem with this engines is quality of spare parts, very simple engine, but often spare parts quality like a shit equal all your work to zero :(
Dirty engine change filters and oil more often.
@fixitnige
3 жыл бұрын
Hello Bertie thx for the comment :)
Your dog wasn't very helpful was she? Barely lifted a paw.
@fixitnige
Жыл бұрын
Hi Richard she keeps a very keen eye and would soon soon let me know if I did something wrong :).
Not a damn Jeep
@fixitnige
6 жыл бұрын
hello josh what do you mean ?
@joshtodd4682
6 жыл бұрын
G0SQI its a Land Rover not a Jeep
@joshtodd4682
6 жыл бұрын
🙈
@fixitnige
6 жыл бұрын
I think your getting confused josh the V8 is in my Jeep The Land Rover I worked on had a 2.5 diesel engine.
@joshtodd4682
6 жыл бұрын
G0SQI what type of vehicle did the Rover V8 in the video come from?