Rotax 462.8 Type 467 Ski-Doo engine full assembly
Автокөліктер мен көлік құралдары
Timelaspe of the assembly of a Rotax 462.8 Type 467 Ski-Doo engine.
**The Y pipe was temporary installed to align both cylinders**
#SkiDoo #ThatSkiDooFeeling #TellementSkiDoo
Пікірлер: 14
Great video.
Great. Only thing i wanted to se was startor mounting. And that wasnt in this 😂😂😂😂
@taylormade385
2 жыл бұрын
You have to pass the wiring out first, then install the stator in the correct position as per alignment indicators. Install the three cap screws with a bit of blue loctite and secure in place.
i need the manual plz
Salut aurait tu un lien pour avoir une livre ou un pdf pour les spec et le remontage d’un 470 type 464 merci
can u the manual in photo pliss
Какая лошадигая сила у этого мотора?
and what is you piston size
Salut i wanted to see how you insert the rotary shaft i cant pull out mine on my type 444LC
@taylormade385
2 жыл бұрын
You have to remove the snap ring on the rotary valve side. Then tap the shaft out of the case. Leave the nut on the threads end to not damage them.
What oil did you use while putting the engine back together?
@taylormade385
2 жыл бұрын
BRP XPS E-TEC full synthetic oil
Where did you get the parts for this engine
@taylormade385
2 жыл бұрын
Gasket and seals are from a Vertex kit available online or BRP dealer. Piston rings from Royal Distributing. Piston circlips from my local skidoo dealer.