All proceeds from the shop goes to Poppy. Find the items that are used on the Dave Sterl channel in the Amazon shop. www.amazon.co.uk/shop/davesterl

@bapsmcginty4782

3 ай бұрын

Dave I know you are not an ambassador for Rotary but can you say who supplied the lift? Looking to purchase one but cant find a supplier.

what a great piece of kit garage now looks great

Exccellent video. Lots of great information , thanks Dave.

Great job Davy.👌

You have made a good choice, i have had the predecessor to this one for twenty years its been moved twice and its still as good as the day i got it

The garage refurb is fantastic. But the new lift is a game changer for you. Look forward to seeing it in action in future videos Dave.

At first I thought you’d moved to a brand new place. It looks fantastic. Well done!

Nice job Dave looks like a winner 👍

Top score, Dave - hope all's going swimmingly!

Lovely piece of kit. 👍

@davesterl

10 ай бұрын

Cheers Paul

Hell of a bit of kit there Dave and by looks of it me and the wee lad starting in a cameo role at the end there at the rhinka lol dandering in to get some rum and raisin! 😂

This was the most in-depth info on hoists on KZread. Given you requirements and space issues, there is no doubt your due diligence has provided you with an excellent outcome. Enjoy your new toy and have a well-deserved Bushmills.

@davesterl

10 ай бұрын

Cheers Colin

Every car mechanic’s dream garage, I’m jealous 😂. Well done 👍

They look great addition to what is not a fantastic looking workshop, look forward to seeing more content 👌🏼

@davesterl

9 ай бұрын

Not a fantastic looking workshop? Hope yours is better then.

@DroneshotzNi

9 ай бұрын

@@davesterl that was meant to say “now” but yeah ok 🙈😂

I am kicking myself seeing the advantages of your scissor lift. My shed at the side of the house was limited to 6m x 4m. the two post hoist only just fits in there and it is a pain to get around once I have a car parked between. Getting in and out of the cars between the two post has always been a bugbear for me. Your system looks like heaven. I might have to bite the bullet and change. When I bought the two poster I had it in the shed at the back which was 9m x 6m, so it wasn't an issue, but as I bought some old three phase machinery (old three phase machines tend to be quite large), I just ran out of room in the large shed for working on cars.

Welcome back Dave, thought you'd taken early retirement, nice lift 👍🏻

Love the new lift Davy👍 The floor was definitely well off level😱.

Impressive set up! The scissor lifts are some job! Don’t suppose you’d be interested in taking on a local customer for yearly service and mot prep 😂

Nice bit of kit

30 seconds in dave . it looks well smart now

Lovely setup Dave. I also know a couple of little ones who likes a wee run to the Rinkha

Nice work, look forward to see it in use. Cheers!

@davesterl

10 ай бұрын

Thanks! 👍

That is great Dave, wish I had the height for a ramp like that… anyway, there is now absolutely no excuse for you to not get some more of your great videos out! 👍

Nice lift that's the way to go look towards seeing future video

Nice setup , i use one similar every day. only times i have to swap to a 2 post are things like fuel tanks and such. For doing interior work these are amazing because you don't have to squeeze in and out the doors haha

@davesterl

10 ай бұрын

Cheers good information thanks

Nice job 👍

That is awesome Dave, some really handy tips for fitting & purchasing one of these lifts. I do like the fulcrum thing that slows down the drop speed. The Brera got the maiden voyage. Well done on that & the very best of luck with it for the next 15 or 20 years 🤞🤞👍

@davesterl

10 ай бұрын

Cheers Peter

@kennedysgarage3281

10 ай бұрын

@@davesterl I’m running a week behind on replying to my comments Dave 😉🙏🙏

i do a lot a work on motorcycles i had one of those lifts you pump up with your foot it was all ways in the way when not in use so i dug a hole an got a hydraulic pump never looked back 😁😁😁

love it!

I have a hofmann vx3500 hi-rise scissor lift so i made 4 x box section/checker plate stools 1 metre high to lower the car wheels onto then dropping lift when doing brake pipes in awkward places / bits of welding & tracking i know its back onto my knees for a while but it works for me because i am limited for space also hope this helps dave.

Good neat job Dave. Hope all well.

@davesterl

10 ай бұрын

Goin great Simon and you?

@SimonManleyAuto

10 ай бұрын

@@davesterl all good here too!

Very smart Dave. A bit of blood sweat and tears 💰 has gone into that for sure. Doesn’t beat ice-cream and toys mind 😜

Good job, and a nice flat floor if ur happen to be doing other projects. Mine is a scissor lift that sits above the floor and only goes up to 1m lift but since I have the same issue u do with height it works perfect for me. Also I am just a hobbyist so it basically a luxury 😂. I did serve my time as a mechanic but left the trade to work in a certain aircraft factory I'm sure u have heard of 👍(I'm not far from u)

Looks great Dave! We have the same scissor lift in the dealers although there not sunk in the floor like you. Very professional! The Kia lads drop engines out all the time, others have done clutches etc with no issues. Fantastic for when you’re doing interior work and you need the doors open Great setup 👍

@davesterl

10 ай бұрын

cheers Gruss

Dave last year I installed my 2nd scissor lift after using first 1 for about 15 years. (Looked very worn. ). My new lift is a different make to yours but with a lot of identical parts to yours. Hydraulics and safety system is identical. Mine came with custom made box sections that go over the hydraulic pipes to protect them. It uses a light sensor between the 2 ramps.If the ramps were to go out of level sync by a small amount it stops which I really liked and showed itself working when I was bleeding the system. Far better that a 2 post when doing jobs like working under the dash as you can have car door fully open. Enjoy your new toy I certainly do mine. 😊

@davesterl

10 ай бұрын

What make is yours?

@the_retired_mechanic

10 ай бұрын

@@davesterl not sure who actually makes it but it's made for and sold under the company name of Automotech Garage Equipment . They have a web site with all the ramps they sell and I'm assured all spares are available

@davesterl

10 ай бұрын

is it a double scissor?@@the_retired_mechanic

@the_retired_mechanic

10 ай бұрын

@@davesterl yes they call them full height scissor lift. Same design as yours

@davesterl

10 ай бұрын

If you have an optical sensor for sync, it is unlikely you have identical hydraulics and the same design. It might look the same, with twin rams, however these rams are connected in series with each other negating the need for an optical sensor. In this design, the larger master ram does the lifting and the slave is redundant. Cheaper models may have twin rams, but both are required for lifting hence the need for an optical sensor to keep it synchronised.@@the_retired_mechanic

Nice!

Very nice Dave , you know sandy will want some now 😂, looks the dogs bs , the vehicles are so much safer on these than a 2 post lift , it will be like using a 4 post lift on the vehicle but you can get at nearly everything without back ache 👍

@davesterl

10 ай бұрын

Sandy won't spend the money

@mikeberry304

10 ай бұрын

@@davesterl he would on Irn Bru Dave 🤣🤣🤣

Good idea to install the protective hood over the hydraulic lines 👍 Not that you will read this Dave 😉

@davesterl

10 ай бұрын

haha good one Ian

22:25 All the time I was wondering what the rotary part of the lift would be but it’s the brand name! 😂

It look good, but I bet your dropped 10mm socket will always roll into the lower concrete pad or under you rubber hose protection mat.....I like the cleaner brighter paint work. A Great upgrade.

Your garage is looking great, i used to work in a garage that had something similar, it was a cheaper version than yours and wasnt counter sunk. Interesting to see whats involved in fitting it. Looking forward to seeing it in use. Cheers mate

@davesterl

10 ай бұрын

Cheers Matt

I like this

I love scissors lift but I have a question if you had the space and the budget would you go for a four post or stay with scissors lift?

what size is the garage? looks small but very well!

Nice, I want one 😂

Dave can you tell me where you purchased this lift please.

Good to have double cilinders on each side but why are the slave cilinders slightly smaller than the masters?

How much space did you Make between the ramps and How much space between ramp and concrete edge?

A lot of hard work has gone into this refurb for sure and i can see why you have been off the grid for a bit. You can see the quality of the lift but I'm not sure my nervous head could cope with the concept of not having a mechanical restraint to prevent unwanted lowering of the lift. If the main hose ruptured, I'm assuming it would lower slowly due to valving ?? Can the ramps be lifted off the bed ? I'm just thinking this would be helpful to accommodate the Sharkeye alignment tracking tables. Looking forward to seeing the lift in action in coming videos . I'm on a 2 post at the moment but this has certainly wetted the appetite.........

@davesterl

10 ай бұрын

No 'main hose'. This is addressed in the video

@markjones8437

10 ай бұрын

There must be a hose from the pump to the rams and a hose back to the reservoir tank surely.... ??? . If a hose ruptures, or a control valve leaks, what stops the rams from descending?? Watched the video again and the master and slave rams surely just serve to balance the both sides - in the same way as the cables do in a two post. Either that, or its a case that it is operating as a split hydraulic system with the assumption that both systems don't fail at the same time?? Genuinely interested to understand how it works..

@davesterl

10 ай бұрын

@@markjones8437 hydraulics work on pressure not flow, so no flow and return

get yourself some of those magnetic pickup tools you will need them lol

What’s the difference between the EX model and the standard DS35

@davesterl

10 ай бұрын

Extendable

That Rotary will last rest of your career 😎

Can you please share approximate cost

@davesterl

2 ай бұрын

Why would i do that?