Subbed because you put everything up front. Your the hero we all need. Thank you 🙏

Those legs are a brilliant addition. So many users have issues with tumblers and usually it’s because it’s not square! Awesome innovation!!

@BusterBeagle3D

10 ай бұрын

Yeah. I truly wish others would follow suit. It's such an overlooked necessity. I have even seen company videos where I cringe at their tumblers if they are not spot on.

I searched everywhere for a video on how to use the rotary on my Lasermatic and finally found one before I ended up destroying a bunch of cups. Thanks so much for the guidance!

@BusterBeagle3D

Жыл бұрын

No worries. Glad to help!

Excellent video. Just ordered and received mine yesterday. Can't wait learn how to use it. Thanks for posting, your video was very instrumental in helping me decide on purchasing this laser.

@BusterBeagle3D

3 ай бұрын

Thank you. Hope you like it!

Thanks for a great review. I was one of the lucky ones who got the enclosed model on the first run. You brought up all the great features of this machine. The quality and attention to detail of this laser is amazing. One feature that I love is that when you slip the honeycomb grid flush against it's posts, it is dead on with the measurements within Lightburn. I enjoy just how compact it is with all it's features. Very streamlined. Look at how much shop space some of these other lasers with enclosures, either bought or self-made, take up. I have exchanged a few emails with Leo the owner, and he has always replied quickly and with much detail. I know that it cannot last once more people become aware of this laser, but it has been very nice so far knowing you can actually reach out to the owner.

I bought one from Amazon last night coming Wednesday can't wait to get going

@BusterBeagle3D

9 ай бұрын

Hope you enjoy it!

Great review, you're one of the few reviewers I trust. Can't wait for you to review the LaserMATIC Mk2 ! Would love to see the new laser with more power destroy the competition.

@BusterBeagle3D

7 ай бұрын

Thanks for watching! I can neither confirm nor deny that I will be filming a review of the MK2 but I definitely am talking to them about at least checking it out to see what I think. I'm glad to see that at least in the specs of the machine they have addressed many of the wish list items that I brought up in this review.

Been following this machine since The Louisiana Hobby Guy mentioned it. Just waiting on a higher-power module so I can get one. But yeah, every diode laser company should follow this company's lead. They're doing the right thing!! Thanks for the video!

@bestyoutubernonegraternumber1

Жыл бұрын

The only shame of it all is that they came after everyone already bought the Xtool products & we are all buying the co2 & IR/10w blue F1 now. It is overbuilt, which is a plus in my mind. It is AWESOME, but I already have a 10w laser. It looks to me to be the best value in all of laserdom - enclosure, air assist INCLUDED, ducting, exhaust fan on the enclosure, big one, not tiny - great laser. Too late, though. 10w diode is obsolete, engraving only. THAT SAID: I want one. I would PREFER this to my 10w d1 pro. It comes with everything I paid extra for with xtool. It is awesome. It is overbuilt, again, not a problem; AWESOME! If it is your FIRST laser to get in, GET IT! It is the best value on the market right now - 899 on sale. BUT take note that their products are all sold-out other than the bundle; something to consider. It is an awesome laser, though. ALL IN package for 899, you CANNOT beat it. Depending on what you want to do, I would want to get my hands on it if I was not moving up in the xtool line as we speak.

@flakk1989

Жыл бұрын

@@bestyoutubernonegraternumber1 Yeah, it's hard to compete when there are more powerful ones out there than this. I just like all the bells and whistles that they come with. I've had 3 lasers so far,5w a co2. I wish they had a 20w when they came out with it! If they do what the Ikier did, their features combined with the Ikier, that would be a beast of a diode, obviously with a higher cost. We'll see what the next diode will bring!!

Thanks for the review. Mine is on the way and I can't wait

Hi Ryan, *great review!* The next iteration of the machine *will have the passthrough!* I have also compiled an extensive baseline Lightburn Library, so look for that very soon! Leo will be sending it out to all current owners, and it will be on the USB for future purchasers.

@BusterBeagle3D

Жыл бұрын

Hey Rich. Just checked out your video this morning. It was very thorough and comprehensive, great job! I should have checked it out before but I just didn't think many people had even gotten their hands on this machine yet. It's clear that you are equally enamored with this machine as you should be. That's awesome that you are sharing your material library like you talked about at the end of your video, I'm sure that will be a big help for a lot of people. Cheers!

@Samcraftcom

Жыл бұрын

“Daaannng!!!” -Joe Dirt. 😂 That’s the way to skyrocket beyond the competition, bravo Roly!

@ronsone8373

10 ай бұрын

Only moterized Z axis missing now

Your wish list matches mine!

WOW!!! That is seriously the nicest looking diode to show up in a while! Tons of features and things included to really make it ready to use and leave nothing to wish for!

@BusterBeagle3D

Жыл бұрын

Yeah just like you as someone that has multiple machines it really needs to be a large shift to impress me and this one does that. I really think this company is going to get real busy real quick.

Roly Automation is like Bambu Lab. Both companies came out of nowhere and up the bar for Diode laser and 3D printing. I have the Bambu Lab X1C and P1P and will soon enjoy the Roly LaserMATIC 10.

@BusterBeagle3D

Жыл бұрын

Yeah that X1C was an impressive looking machine as well. I think you'll like this one as well.

Thanks for your review. Saw Rich's review too and only wish I could get my hands on this one....

Thanks for the review. I was going to get the atzer p20 but loved the quality and cable management of the roly. This is my first lazer. Cant wait. Should be here in a few days. Was thinking of waiting for the 20w but this is fine for me for now

@BusterBeagle3D

10 ай бұрын

Glad I could help!

Hey Ryan! Thanks for the overview! I have one of these on pre-order. I was looking at the Jenmitsu LC-50 and the Xtool D1 Pro. I ended up placing an order for the D1 due to it's upgrade path. Then a day after I placed that order I saw another review on KZread and cancelled the D1. To me this machine is where the laser market should be in 2023 as far as price and the tech goes. Most lasers are just iterations on the same tech with no real improvements. (FDM 3D printers are in the same stagnate cycle) I'm really looking forward to this! I have that kid in the candy store feeling. :-)

@BusterBeagle3D

Жыл бұрын

You’re welcome Greg. I have the D1 Pro and an older Genmitsu LC-40. Both are also nice machines but there is just something really special about this one. I think you are going to like it.

Another great review Ryan. Hope you are well! ;) ... great to see your channels growth ;)

@BusterBeagle3D

Жыл бұрын

Thank you Sean as always!

I am going to get one of these!

Mine arrives this week.

It's a great machine! The first run sold out quickly, but more on the way. I have pre-ordered one to make sure I am in on 2nd run. The Louisianna Hobby Guy also has a ton of information about this machine. I have also found Leo to be very customer service oriented and very responsive to his customers or potential customers. Great guy! I hope he does well as this type of customer focused company is what the diode laser industry needs! Thanks for the review!!!! Can't wait to get mine.

@BusterBeagle3D

Жыл бұрын

Nice! I’ll have to look up his video. I honestly didn’t think anyone really had this machine yet but it’s awesome. You are really going to like it.

Great video.... I just ordered

@BusterBeagle3D

Жыл бұрын

Hope you enjoy it!

Wow impressive i should have seen this a week ago, hopefully they can deliver in Asia

I too was fortunate to get the Roly 10w on the second wave. I agree with all the positive comments. I love the use of the led light and the rotary without lifting the frame like I had to do with the Ortur. One problem that I am having is that at random times, the machine goes into busy mode and it states that it is streaming. I wil call Leo and see if he is aware of this issue. What I have been doing is shut down the lase and restarting it. Has your Roly ever gone into a Busy mode?

@BusterBeagle3D

Жыл бұрын

I have not noticed any busy mode. Were you able to reach out to Leo and see what he thought about it?

Just an update to what was mentioned at the beginning. The 40W module will be available on the MK3 due out sometime 1st or 2nd quarter 2025. The MK2 is available in 20W and 30W. There are no plans for a 40W for the MK2

Hope the 20 and 40 watt laser head can be installed without a major upgrade, particularly to the gantry.

Nice review. I'm interested in the tile etching using NWT method. Your power scale test and 3-tile etchings seem to look pretty grainy and run at low resolutions (what line interval did you use). When you have time could you run then at smaller line interval - like 0.10mm/0.08/0.06? Thanks

I absolutely love this machine. Still not available on Amazon. They had some 10 W without the enclosure but not even those are available anymore 😢

Thanks for the video. I am still on the fence about buying one of these. I have access to several other lasers (all CO2) at my local makerspace. This would be my first diode laser. I haven’t seen any reviews of this machines ventilation system. Any suggestions on this would be helpful. Also, no one has commented about the noise level of this machine. I would really like a machine that could be placed into a small home office environment. Noise, and fumes could potentially force me to place my future set up out in the garage. That means extreme heat, and cold. If noise and fumes could be controlled, the next concern I have would be the longevity of the laser diode. How long would this last before needing to be replaced, and how much would you expect that to cost? Then my final concern not addressed in any video is vibration. How stable of a table would you need? The big CO2 lasers I have access to are shaky beasts. They are big, metal, and very heavy and they all shake quite a bit while in use. Again, thanks for the video. Frank from Charlotte, NC.

I have the same machine. Loving it so far. Have so much to learn . How can I get a file for that waste grid? Please keep these videos coming on this laser...:)

@BusterBeagle3D

Жыл бұрын

I'm glad you like it. I'm using the same grid file that I made for my Ortur laser. They are the same size and have the same home position so it worked perfectly. You can find it here: www.etsy.com/listing/1290139327

I really like the heart box!!!! So do u have to adjust the laser height between engravering and cutting?

@BusterBeagle3D

10 ай бұрын

Nope. Same focal height for both.

This thing is massively overbuilt yet, on sale at time of commenting, at 899, it is an insanely awesome value. Even at the 1099 non-sale price, since it comes with everything you need, it is an amazing & insanely awesome value as well. Is it belt run under those things? Why is the x axis complete replacement needed to replace the laser, though? :P It is an awesome laser. First one I saw that makes me wish I had that instead of my 10w xtool d1 pro. I have the p2 & f1 on order right now, too.

A plug in for the roller assembly with a switch would be nice. Agree with the level but no big thing.

Hi Ryan, GREAT review! I was close to pulling the trigger on Atezr P20 and came across your review of this machine and have moved forward with the Roly. Do you have any recommendations on an internal smoke purifier? I’m new to this and it will be in my 4K foot shop and not easy to put a hole in the exterior wall do to HOA. Any help is appreciated. Thanks for your help! -Kris

@BusterBeagle3D

Жыл бұрын

Thanks, I hope you like it! As for the purifier I haven't found a good one myself that I would be willing to invest it. They can be very pricey. I run mine thought a window using a port typically intended for a portable AC unit. I have everything running through an inline fan that has quite a lot of power behind it.

Great video, I'm new to the laser world. I just got my Xtool d1 pro two weeks ago and I'm thinking about returning it and purchasing this one because of all of the many features. I would really appreciate your opinion. Thanks Mike

@BusterBeagle3D

Жыл бұрын

The D1 Pro is also a good machine but this one does seem to have a nicer set of features. Only downside now may be availability. Last I checked they are still on preorder now up to April I believe. Still may be worth the wait if you can.

Hopefully when they come out with the 20 watt it will work with this one

Thanks for the review. Is the PSU suitable for use in Europe with the right plug, eg. is it 110-240 v PSU?

@BusterBeagle3D

Жыл бұрын

Yes, it is a 120-240V PSU

How does this machine compare to the Ortur LM3?

Hello. Nice info. Is there a file for the grid you made? Thanks

@BusterBeagle3D

10 ай бұрын

I use the same one I used for that Ortur LM3 since their workable area is the same: www.etsy.com/listing/1290139327

So air assist is not automated with light burn? That’s unfortunate. I like that feature in the scuplfun s30 I have. That’s one of the reasons I bought that one. I’m still buying the roly tho but it’s good to know I’m going to have to learn when and how to turn on the air assist at the appropriate times.

@BusterBeagle3D

11 ай бұрын

The air assist will turn off and on in Lightburn. What I was talking about was the volume of air. I like to trickle the air even while engraving to keep the lens clean. On some of my more recent machines I could adjust that on the fly which was what I was talking about.

What version of lightburn are you using? I’ve seen multiple types and are unsure what to get

@BusterBeagle3D

9 ай бұрын

Make sure you get the g-code version.

As someone who is looking to start a business using a CO2 laser, what can you tell me that this can or cant do when comparing it with other lasers in the 20 Watt range? I have been looking into the Xtool as of recent. Anything i should consider before making a decision? Programs, material allowance, bed size, etc... anything notworthy that this cant do?

@BusterBeagle3D

7 ай бұрын

This is not a CO2 laser, this is a diode laser. The big difference between the two is the wavelength that they operate at. A CO2 laser can cut clear materials while a diode laser never can no matter what the wattage is. Wattage of the diode laser really comes down to strength of cutting and speed because many times the laser can work faster since the beam is more powerful. The trade off to that though is size of the laser spot. A 20W laser may have a much larger laser spot size then a 5W laser meaning you can get better detailed engraving with a 5W laser vs a 20W laser. Now that difference might not be immediately noticeable since we are talking less then half a mm but it's still there. If it's cutting ability of non-clear materials then the higher the wattage the faster it will cut and in less passes. Most lasers use Lightburn so it's pretty standard. Some have their own proprietary free software, namely xTool lasers but even those work with Lightburn as well.

@skr33nsav3r

7 ай бұрын

@@BusterBeagle3D I appreciate the quick and detailed response! If you were to pick one to start with, which would be your first pick and why? My guess is it's this one here. But is cutting plastics and glass really that necessary? I suppose that would depend on the desired business product. If I were to cut thin slats of wood for wall decorations, burning in images, engraving into wood materials, which would be the best choice? It sounds like I should start with Lightburn as it's compatible with most machines. Is this program able to do the spinning or curved features of some laser machines? Thanks again for all your help.

I’m interested to buy it but I’m wondering if it work for mirror acrylic!?!

@BusterBeagle3D

6 ай бұрын

I'm not sure exactly what that is but my guess would be no. No diode laser can cut clear acrylic and what you are describing is what I'm assuming is clear acrylic with a mirror backing.

The latest shipment of this wonderful machine does not have the sensors on the lid. I think they're now using a proximity switch.

@BusterBeagle3D

Жыл бұрын

Yeah. I haven't seen the change yet but I just went ahead and disabled them all together.

Wishing u had a video on make that grid board for roly

@BusterBeagle3D

10 ай бұрын

I don't have a video on it but this is the grid that I used. I know it says Ortur but the size and orientation is exactly the same. www.etsy.com/listing/1290139327

@frankalviso3147

10 ай бұрын

@@BusterBeagle3D thank u. But I'm confused. How but should I make the board. Same size as my honeycomb?

@BusterBeagle3D

10 ай бұрын

@@frankalviso3147 Yes. I just measured my honeycomb and used that same size. Mine might have been a little larger since there was some wiggle room but honeycomb size should work.

How long did it take to engrave the cup in this video?

@BusterBeagle3D

10 ай бұрын

Since that was such a large engraving I believe that took about 30-40 minutes if I remember correctly.

Can you tell me what the weight of the laser engraver and enclosure is?

@BusterBeagle3D

Жыл бұрын

Honestly I’m not sure. I know it’s 29lbs without the enclosure so with it including the metal base it’s probably around 40lbs.

@LaszloBagi

Жыл бұрын

@@BusterBeagle3D Thank you

Can you tell me the size of the feet?

@BusterBeagle3D

Жыл бұрын

26x31mm

@LaszloBagi

Жыл бұрын

@@BusterBeagle3D Thank you!