How to make a beautiful 3d coin blanks by laser
Ғылым және технология
Laser source :JPT50w
software :Ezcad3
lens:200x200mm
slice layer thickness :0.008mm
Relief hatch:0.03mm ,speed:1500,power:90
Clean hacth:0.04mm,speed:3000,power:25
clean interval layers :5layers
after finish the model use small power and big speed clean sometimes
more information you can visit:www.hiteccnc.com/fiber-laser-...
Jinan Hitec Machinery Co.,Ltd
Any help you can contact with me:
whatsapp/wechat:+86 18560189303
Пікірлер: 31
Were you doing cleaning passes in between and if so what settings? Thank you!
@hiteclasermarkingmachinefr408
5 ай бұрын
Clean hatch 0.03 speed 3000 power 30% interval layer 3
Impressive...What is total deepness you can achieve on steel ? How many passes ? Time...?
@hiteclasermarkingmachinefr408
6 ай бұрын
This is brass deepness about 1mm passes200 time about 2hours if you want relief stainless steel the deepness is no limited
Impressive! One question, when you do such projects, do you need to glue the coin to the base with some kind of double sided tape or something for the coin to stay exactly in one spot or it doesn't micro move at all during a 2 hour period of non stop engraving? Thank you
@hiteclasermarkingmachinefr408
5 ай бұрын
Working is as this,first sliced the project many layers about 200layers then the machine will marking from 1layer to 200layers one by one from up to down after engraving every layer the focus distance will move down one layer thickness automatically then mark until all the layers finished
@HDscreenerX
5 ай бұрын
@@hiteclasermarkingmachinefr408 Yes, but the question is, do you need to "glue" the coin to the base or not? It doesn't move at all if you just place it down on the bed?
@hiteclasermarkingmachinefr408
5 ай бұрын
@@HDscreenerX no need glue it on the table only put it on the table is ok the project heavy is enough keep it not move it is not same to wood cnc machine when the light engraving there is almost no strength to move the project
@hiteclasermarkingmachinefr408
5 ай бұрын
@@HDscreenerX the light strength is very very little
@HDscreenerX
5 ай бұрын
@@hiteclasermarkingmachinefr408 Thank you for the reply 👍
Fantastic. But what material is the coin made of?
@hiteclasermarkingmachinefr408
6 ай бұрын
it is brass
Very nice work. Will you share the file or show me where I can get a copy of the file for me to try on my fiber laser? Thank you in advance.
@hiteclasermarkingmachinefr408
5 ай бұрын
You can add my whatsapp,did your machine use ezcad3 software or 3d laser marking machine
@16888kevinlee
3 ай бұрын
Hi @@hiteclasermarkingmachinefr408 Your project is very impressive. Would you mind to share the file with me too? I mainly use LightBurn but can switch to EZCad2 if necessary. Thanks in advance !
@hiteclasermarkingmachinefr408
3 ай бұрын
@@16888kevinlee i can sent to you the model but ezcad2 and lightburn can't did that effect this model need 2.5d or 3d machine
2.5D LASER ?
@hiteclasermarkingmachinefr408
6 ай бұрын
Yes,software ezcad3
Very nice. However, the title is misleading, you didn't actually show us how to do it.
@hiteclasermarkingmachinefr408
5 ай бұрын
My channel have many tutorials you can check it
@hiteclasermarkingmachinefr408
5 ай бұрын
kzread.info/dash/bejne/amuFl7WSlqW1qLQ.htmlsi=oPfV8Buoinh2Mw9l this is the tutorial
and price ?
@hiteclasermarkingmachinefr408
5 ай бұрын
you can add whatsapp:+8613181737002
Why would you put the laser by the window? People walking by can hurt their eyes!!!
@hiteclasermarkingmachinefr408
5 ай бұрын
Thanks for your suhgestion😂,we have used to
هل هنالك فيديو توضيحي ❤
@hiteclasermarkingmachinefr408
3 ай бұрын
I will make a video to expain
@hiteclasermarkingmachinefr408
3 ай бұрын
kzread.info/dash/bejne/amuFl7WSlqW1qLQ.htmlsi=NakACyTdLeTE-TGH This is the tutorial
This doesn't explain anything
@hiteclasermarkingmachinefr408
25 күн бұрын
kzread.info/dash/bejne/amuFl7WSlqW1qLQ.htmlsi=VS_wHGAYiIPRLE1P
@hiteclasermarkingmachinefr408
25 күн бұрын
this is the tutorial firend