Literally only clicked to see an internal picture of the joystick but ended up watching a few videos in the background. You're really great

Dude, thank you so much for this. I'd all but given up after snapping all 4 clips on the backplate but after your suggestion that it'll still attach with the side clips bent in - absolute hero. I wasn't changing the springs per your plan and instead fixing the right stick that was dead horizontally after only 2 weeks of albeit kinda intense use. The top/horizontal part had come out of its mechanism/slot. Saved me from ordering a new one! Earned a sub from me!

@cppctek

8 ай бұрын

Thanks brother. Hey have you seen any of my newer mod videos. Lmk what you think. I’ve pushed out a ton of them but here’s one kzread.info/dash/bejne/eY2JsdmaZ5vdnco.htmlsi=z0BafETAHqDTbEi9

loving your content!! always watch, keep the videos coming dude.

Thank you for the guide TEK. Just did this at 6.50mm and it feels just as good as my ps5 joysticks.

realy good mod. my feel like a regular xbox one controller now

Thanks dude, these control stocks are way to loose out of the box.

Following this video, I skipped the spring mod and I found that if you jam up the plunger with a sliver of tape to make it fit more snug, you can eliminate the play at the center of the sticks. Made fps games more enjoyable for me on this thing 👍

@cppctek

Ай бұрын

Heck yeah. I did that too to get rid of some wobble and that feels better keeping you more focused for sure on target

Great tutorial man. I can't believe there aren't more like this given how loosey-goosey the Ally's thumb sticks feel. I might not even do the mod but here's a tip from a fellow tech nerd 😁 Oh and was wondering, have u stretched the springs beyond what's in the tutorial? I like mine extra stiff (is what she said)

@cppctek

Ай бұрын

Thank you so so much !! And yes I like it tight and stiff too lol 😆 but yeah I’ve gone past that. I’ve also used the springs out of the handheld diy brand tighter hall sticks and those works great too if you have them but the Hall effect sticks themselves the sensor on the left gets messed with when you using the trigger and reduces direction. I have been meaning to do a more up to date joystick guide. I will be doing one soon for sure. Thanks again. !! 💕💕🤠🤠

@cppctek

Ай бұрын

Here’s a video showing the handhelddiy hall sticks kzread.info/dash/bejne/nJ6arM97dK2TmJM.htmlsi=TcICDaR0sCAUvQN8

@cppctek

Ай бұрын

Also watch this kzread.infoD4NZpD6H9sc?si=P7Is2KB793gPerht Thanks again !

You Save Me Bro 😅 Thank You

Hey, I just completed this mod (it’s great thank you for the guide) there is however a smaller noise when I push the stick upwards. Do you think this would be something to do with that tiny white plastic piece inside the stick house you show at 4:49 ?

@cppctek

2 ай бұрын

Likely something isn’t seated perfect or is rubbing inside the joystick

This is the first thing I did to mine I play fps and couldn’t take how loose they felt and while it was open I did the teflon tape on the joysticks stems as well the whole thing feels so much better

@cppctek

Жыл бұрын

Heck yeah. What’s the teflon tape mod do ? I haven’t seen that before. Now you got me interested lol

@xbigdirt1220

Жыл бұрын

@@cppctek some ally have the joysticks caps kinda wobbly and they click and you can feel it usually when moving the sticks side to side and applying some teflon tape on the sticks stems it makes the caps fit more snuggly therefor removing the noise and the wobbly caps feeling

@usagitivi4054

9 ай бұрын

So do I just have to put some Teflon tape under the stick cap? how much is best to take?

@xbigdirt1220

9 ай бұрын

⁠@@usagitivi4054just take cap off and wrap tape on the stem of the joystick itself and how much it depends on how loose your caps feel wrap some push the caps back on and see how they feel if still loose wrap some more but an inch to 2 inches should be enough

@stretchedraz

Ай бұрын

I mostly play shooters competitively on m&k but with the 120 hz I enjoy the thought of being able to play relatively competitive on the go with the sticks. Would the tighter sticks make enough of a difference for accuracy to feel more comfortable for shooters? I’m newish to controller playing

Is there not anything like precision rings for this? I feel I have to bump the sens down on mw3 a lot on the ally due to how loose the aiming feels

@cppctek

5 ай бұрын

The rings limit the aiming severely. I tried those

Want ask a ? About the heat sink mod... I did ur mod and wanted to know did I have to remove the sabrent sick on drive... also I notice when i use my XG Mobile that fans on it are not on all the time now like was before.... thanks for the mods and keep up the good work

@cppctek

Жыл бұрын

Hey the sticker is ok to leave on. Won’t make a difference. Makes warranty easier with sticker on. Also fans aren’t on as much due to apu temps being lower

@jamiefff

Жыл бұрын

@cppctek sorry but I spoke to soon... I don't know it I did anything wrong when idle I can get 70c in game but when I started to play more went as high 94c then went to 90c to 91c... was playing Horgwarts Legacy

@jamiefff

Жыл бұрын

Is there anything I can do to fix thisb Issue?... had the same problem when using the Copper heat sink mod too

@jamiefff

Жыл бұрын

Have u did any test with Sabrent drives?? I the heat sink mods I have done have been with Sabrent drive... maybe it the drive that has Issues...

@cppctek

Жыл бұрын

Are you looking at nvme temps or apu temps. Armory crate does not show the nvme temps. You have to look at a program called hwinfo to see nvme temps

My right joystick kicked the bucket and I’m about to replace both with Hall effect joysticks. I find them too loose too, so I may stretch the springs while I’m in there as well. Question though, on whether you think I could do this. I’m a little hesitant: I’ve built my own computers and also upgraded my laptop internals. I don’t have much worry about simply replacing them, but I do worry about taking them apart to this extent. Could someone help me if I fudge it up? Lmao!

@cppctek

8 ай бұрын

It’s not bad but I will say stay tuned. I have some new drop in ones coming soon.

@c0073c

3 ай бұрын

just do it,the price just 25 RMB for 1

Do you know, if I took the springs from a standard xb1/ds4 ALPS analog module would they fit and be a higher tension than the oem springs in the Ally ones?

@cppctek

10 ай бұрын

Unfortunately they wouldn’t fit. They are too wide to fit inside the hole. That’s the first thing I tried. I ruined a few controllers too busting springs out lol 😂

Is there a stiffer spring replacement you can buy

@cppctek

Жыл бұрын

Maybe. I heard of one. Just didn’t know where they are sold

@BigDaddyMacc

Жыл бұрын

I seen a post about it. You can buy springs

@cppctek

Жыл бұрын

Same but could not find the source

Yo come do mine 😁. My left one is pretty damn fucked. Have to order some new ones soon just to see if that’s better. Awesome video! But I ain’t doing this 😅

@cppctek

Жыл бұрын

lol yeah it’s tough lol. How’s the left stick messed up pro yours ? I may have a fix for it if it’s a dead zone issue

@HawkNocturnal

11 ай бұрын

@@cppctekwell I have deadzone when I play most games unless I play them with steam. So if you have a fix I’m all in. But the real issue is my circularity error it’s 22% and u can feel it. Not very clearly, but still. Late response I hadn’t even seen your reply. Man I tried the 900p the other day. Insane 20 more fps in Diablo 4. Like wtf. Haven’t had that much time on my hand lately, but I’m getting ready for starfield. Will play it hopefully on 3 devices :) Xbox, pc and ally 💪🏻

i can get it down to 4.0 / 3.4 on the circularity test

@cppctek

Жыл бұрын

Dam impressive

@BigDaddyMacc

Жыл бұрын

@@cppctek but i have to put dead zone around 25% and outer zone at 90% if i remember right. I wanted to make a post on reddit and see what results others get.

I need this mod.. Because my analog, not back to centre

@cppctek

8 ай бұрын

Have you tried re calibrating it a few times. ?

@miftahfarid6112

8 ай бұрын

@@cppctek on physic, my ally not back to centre (have space on left).. On calibrate working normaly

@cppctek

8 ай бұрын

@miftahfarid6112 send a picture in our discord. Never seen one physically off center unless it was dropped or broken physically. And I’d suggest letting us see it before you void the warranty or mess anything up if it can be fixed by asus free

is this also possible for the legion go?

@cppctek

8 ай бұрын

I believe so but I may have a new set of joysticks coming in soon to test and I think they sell llg ones too

@RaQz62

8 ай бұрын

@@cppctek i can confirm its possible i just did it on the legion go

@cppctek

8 ай бұрын

Heck yeah dude

Step 1. Disconnect the battery.

@cppctek

Жыл бұрын

As I said not for newbies. That should go without saying

@cppctek

Жыл бұрын

If something like that bothers you I can assure you this is s not the mod you wanna do lol 😂. Confidence is key with mods. Know what you are doing before you do it. The amount of shit I’ve done with computers plugged lin and on would blow your mind. If someone leaves it plugged in unless they are butter fingers and short something out that’s not an issue. There’s no voltage running through these sticks either powered off lol 😂

@gooddempsey

Жыл бұрын

Note: you must leave power connected when you do this mod because it’s not for newbies.

I just add a piece of cotton between the joystick and stick piece and is tight enough to not get stuck

@cppctek

7 ай бұрын

That’s cotton does nothin for the spring tension if you’re just setting it under the joystick cap. Unless you’re taking the entire joystick apart and taking the spring out and then shoving cotton inside the spring cup and using that as a spacer but even then that will get caught up eventually. Horrible idea lol

@carimpest

7 ай бұрын

@cppctek it's exactly the same as tensioning the spring, you are just mad that you have to pass through all the pain of taking apart the joystick, it's not rocket science you know?

@cppctek

7 ай бұрын

@carimpest the tension does not come from under the cap dude this is not the tension we’re talking about out

@carimpest

7 ай бұрын

@cppctek I mean it works great for me, another tip is that instead of using joystick protector I cut a piece of hydrogel screen protector and wrap the joystick stick with it very carefully and its absolutely seamless

@cppctek

7 ай бұрын

What’s the purpose of the screen protector film ? Drop by the discord plz if you can. I really am now curious about this h mods and seeing what you’ve done. Also my community wants to see

Hi, im planning to take care of my gp66 disgusting temperatures using Gelid thermal pads and shimming gpu by 0.3mm as You suggested. How are your cpu temperatures tho? In the video of gp66 teardown comments You said to "Use thicker layer of thermal paste on the cpu", did the die contacted fine? I wanna make sure cuz my biggest concern were extremely high cpu temperatures. If you could give me link to reddit post about gp66 you created it would mean a lot to me as it's not in the video description. Thanks

@cppctek

Жыл бұрын

Hop on by my discord I’ll share some temp temping data and compare