I still have the NT-1A that I bought twelve years ago. I didn’t know at the time that the difference from the NT-1 was a presence boost, but it has served me well. It’s also nice having a setting for it in the Rodecaster Pro 2.

Surreal! I was just doing a deep dive on this mic and you’re my favorite channel. KZread recommended this and I was thinking how did I miss this video? Wow perfect timing! It’s crazy the value you get with this. I could buy it and skip having an audio interface and still get 32 bit audio with amazing sound and xlr if I need it later. All for way less than a shure sm7b.

@tombuck

Жыл бұрын

Woah that is crazy timing! I originally had a different video scheduled for today, but finished this one last night and got excited about it 😁

@hackinghifi4247

Жыл бұрын

@@tombuck awesome thanks I much! The thing that really kills me is the no headphone jack. Having no way to listen to a recording without latency is a real bummer. Another KZreadr said that in low latency mode there wasn’t any lag so I thought it might be ok. I’ll take your word for it that it isn’t. I’m getting a Samson mic that’s super cool coming soon you may want to check out. It’s called the Sagomic and it’s super tiny and sounds great in reviews. My point is it’s $30 and has headphone out 🤷‍♂️ Seems like a deliberate choice to exclude it so their usb specific mics have distinctive feature sets to sell them. Goes to your point on them choosing marketing over customer satisfaction sometimes. Still a great company though! So much innovation.

@JasonGonish

Жыл бұрын

Hacking HiFi....What is the best mic to use that coaxes with voice cross overs? Is the vocal pick up come with a crisp pitch play back....So what do you recommend?

@hackinghifi4247

Жыл бұрын

@@JasonGonish sorry jason I don’t understand your question.

Whoa! Never been this early to one of your video! Thank you for all the incredible work that you do! We are forever thankful for the knowledge you bless us with!

@tombuck

Жыл бұрын

Thank you! It makes my day to hear that, I really appreciate it 🙏

Hey Tom! Great video. Have just gotten an NT1 5th Gen about a month ago and love and agree with everything you said. Run this with a Procaster and a VideoMic NTG and this was a Really good review. Going into my AI-1 it works a treat under XLR. The Procaster requires an SE Dynamite, but the AI-1 gain for the NT1 is way down at about 11 o’clock/40%ish (~24db?) under USB, Rode Connect sets it up nicely and I can’t notice any difference in raw sound in my DT770 headphones. Zero latency … yep… it’s a challenge Biru I connect the headset to the NTG that is also on Connect and latency to ULTRA Low and it seems to me to be close. But then… I typically only do Voice so less important…. THANKS and WELL DONE!

Tom you’re a beast man. I got my rodecaster pro 2 earlier this year because your videos. You’ve done it again as I’m on my way to get the nt1 5th generation! The compatibility and quality is unmatched in my opinion! Thank you!

@tombuck

8 ай бұрын

It's a super sweet mic! The 32 bit float is a nifty feature, but I sure do wish you could monitor with headphones directly.

Fabulous review, Tom. I just adore the sounds of the Earthworks mics. I'm pretty set for microphones, but I still have a major yearning for the Earthworks SR314. That thing is just so beautiful in both looks and sound.

@tombuck

Жыл бұрын

Me too! It seems like such an incredible mic.

Best colourful studio I have ever seen..superb ❤

Thank you very much for your review. very in depth and detailed. Going to buy one soon. and subscribed

@tombuck

Жыл бұрын

Glad it was helpful! This is definitely one of my favorite mics.

More "body" in the 5th gen. I listened through AirPods and studio headphones alternatively. Great that you always manage to talk to a "peasant and a king" when presenting information, no one is left out. Of course, you're a teacher but still I want you to know it impresses so much. Great also that you never get tired of bringing in your other mics for comparizon so I once again got convinced the Lewit 240 Pro is such a value for the money ..

@tombuck

Жыл бұрын

Thanks as always! It's definitely becoming a bit of a dilemma to decide what to include in comparisons 😁

This looks great!

@tombuck

Жыл бұрын

It’s a winner for shure…er, Rode!

You're a wealth of information. Thanks for everything you've included in this video.

@floor.mp3

9 ай бұрын

right? this guy rocks

Really glad you out it up against the Lewitt Mics. Been wanting to get a condenser and the Lewitt vs NT1 has been a consideration.

@tombuck

Жыл бұрын

Oh man, the Lewitts are so good! You really can’t go wrong, so it just depends on which one has the sound you like.

I am always surprised how much people talk about condensor vs. dynamic, and not about e.g, polar patterns. If you don't want background-noise, cardioid or supercardioid is a great help.

Lol I love ASMR Tom. I like the way the NT-1 looks and sounds!

@tombuck

Жыл бұрын

Stay tuned for the new channel. 🎙️🫦

1. Great video! 💯 2. Love the fact that you pay attention to details others don't mention. 3. To anyone reading this - if you wish to use it via USB-C and are using Audition on a PC (I've heard some do), you cannot use 32-bit float! That's based on their guide page, and also their return email to me. _edit_ : _Also if your computer does not have a USB-C (desktop perhaps) then you need to purchase an adaptor eg. Rode SC18_ . I have the Rode-NT USB (a good mic for what it is) and wanted a good Rode XLR. I've been thinking about this mic for about 4 months, and because of the _few_ confusing but _critical_ flaws and oversights, I haven't. Now I'm sad and don't know what to do. Thanks for the review. 👍

Yeah, I love my 4th-gen NT1, so the 5th-gn NT1 isn't really in the cards for me. But for some reason, I feel like I need to watch every video about it! For me to make the jump, it would have needed to provide much more USB functionality like you said near the end of your video. Floating-point audio is very interesting to me, but I'm perfectly fine with being meticulous about setting the gain. Unless, of course, the RØDECaster Pro II got a firmware update that included 32-bit float recording...

@tombuck

Жыл бұрын

Really hoping a firmware update like that is in the works! I definitely don't think the 5th gen is worth the upgrade from the 4th, but it's a great refresh for anyone who doesn't have one.

Love the 32-bit float, but still just makes me appreciate the Lewitt 440 even more. Just such bang for buck.

ITS CRAZY THIS THE MIC I BOUGHT A WHILE BACK 4 MYSELF && UR VIDEOS WERE SUCH A HUGE HELP💯😮‍💨IMO NT1 5TH GEN HAS BEEN AMAZING 4 ME SOON AS I PLUGGED IT IN💯WOULD DEFINITELY RECOMMEND IMO‼️

@tombuck

Жыл бұрын

So glad it's working well for you!

good sound from the mic

Tom, great video as always! What are your thoughts on these mics versus the Podmic USB Plus? Also, what tabletop mic stand are you using in this video? I am looking for a good one in addition to my boom arms.

@tombuck

Жыл бұрын

I have a bunch of Samson tabletop stands I found on Amazon. They're cheap and they work great. I've been really impressed with the PodMic USB so far. I do like the sound of the NT1 better, but the new PodMic is no slouch. And if you're planning to use it primarily for USB, then you can save your EQ settings to the mic itself so it always sounds that way. It also has the benefit of more physically controls and a headphone output.

Is this mic suitable for voiceovers if your voice has sibilance or erratic clicks ? I am using a rode procaster at the moment.

@tombuck

Жыл бұрын

I personally thing the mic emphasize sibilance a bit less than the Procaster, but they're not too different in that regard. In all honesty, a big fat windscreen might work the best.

@paporotnikjo6091

7 ай бұрын

Please tell me, is this microphone suitable for rap?

In an ideal environment which mic sounds better ? The rode nt1A ,nt1 or shure sm7b ?

@tombuck

Жыл бұрын

It’s personal preference really, they’re all awesome. I would personally choose the NT-1 out of that lineup.

@TheFinalRevelation1

Жыл бұрын

@@tombuck Thanks for the advance

@Slipsch

Жыл бұрын

@@tombuck You need to try the Lauten Audio LS-208

The Rode Nt 1 is the first condenser mic that impressed me but it's something I don't need right now as my space isn't treated for audio

@JuanPreciado87

4 ай бұрын

What micro would you recommend for untreated space environment? Just for my house, I want to record audiobooks.

the earthworks is my goal to get soon, it sounds completely amazing and the rode 5th generation comes in at a second choice

@tombuck

Жыл бұрын

The Earthworks is absolutely worth it. Such a beautiful mic, inside and out.

@TheOneMuslim

Жыл бұрын

@@tombuck althought I do love the re-20 too which I'm using now

between the recent sennheiser mic and this one, I'm gonna have a hard time picking out a condenser mic haha. really solid.

@tombuck

Жыл бұрын

So many great options! The Sennheiser wins for price and simplicity hands down. But the Rode has a lot of fun technical features if you're the kind of person who likes to poke around in apps and tweak settings to your heart's content.

I have the same wish for the Rodecaster Pro 2 -32-bit float. I was excited when I saw the files it saves are 32-bit float, but then it’s obvious on sight that it’s sampling at 24-bit and saving it with the most significant bits all set to zero 😢

2:45 i have the hyperx procast and it has that too! it’s indeed awesome

Also, what desktop mic stand are you using? I didn't find the details in your description. Thank you!😀

Thank you so much Tom, you have answered all my questions for this new device. Are you able to take a look at the new Rode XLR video capture device that was just released. I really want to know if it can be used directly into a camera...

@tombuck

Жыл бұрын

I just got my Streamer X the other day. Since it's a capture card it's really designed to take signals FROM a camera rather than TO them, but I don't see why you couldn't run a cable from the headphone output into your camera if needed.

@mirodavis3152

Жыл бұрын

@@tombuck You are AMAZING!! Thank you!

"Abso-Lewitt-ly..." Classic, man. Pun game is strong with this one.

Good for ASMR and talking. (At the same time) 😊 No hisses or anything, Just a pure voice audio. (With 32-bit float) 😁

@tombuck

Жыл бұрын

Haha, that part of the video felt so strange, but for a more skilled person than me it could work really well!

@ItsRyukin

Жыл бұрын

@@tombuck yeah, i think so. =)

@coleedwards1634

8 ай бұрын

do you use the5th gen nt1 in a treated room? was thinking about purchasing it but id just be using it in my bedroom.@@ItsRyukin

@lizardpeter

7 ай бұрын

Interesting. I am actually thinking about trying this microphone out to replace my Shure SM7b. I love the way SM7b sounds but I notice some hiss due to the nature of dynamic mics and just how much gain is required to get SM7b up to a good level.

Bedankt

@tombuck

7 ай бұрын

Thank you Martin! I'm glad you were able to figure it out. Hopefully you're enjoying the mic!

Comparing both listening through some cheap gaming headphones, there's a small difference in sound. The 5th seems to reject better room noise and "focus" more the sound, while the 4th seems to have noisier background and a bit "airy"

@tombuck

Жыл бұрын

This is a super helpful insight, thanks!

@floor.mp3

9 ай бұрын

thats what i thought as well and im using proper studio headphones, a lot more like windy hissing sound while speaking in the 4th gen

I couldn't handle the wait, my excitement running HIGH, For that king of mics review, I could no longer complY. 😉 So I decided, "Forget it! I'm getting the Podmic USB NOW!” I couldn't resist its allure, I had to take a BOW. Hey, Tom, what's the scoop? Share the joy, don't delAY! Some overviews are floating around, lighting up the WAY. We're all thrilled and eager, ready for the grand revEAL, Let us in on the secret, the magic this mic can WIELD!

@tombuck

Жыл бұрын

You’re the best. I can’t think of anything clever to say, I just love this 😁

Thanks for the video. Could you do a comparison between the NT1 5th Gen vs the NT USB Plus?

Nt1 4th is definitely more natural, for 5th generation rode company says it has the same character but 5th gen it is brighter imo. 4th Gen for me Thank you.

Great video! I was wondering, can you record via USB and XLR at the same time? I do portable podcasting services and being able to this would be amazing as it would allow me to not just have a quality back up audio stream but some clients like having the audio recorded on their own devices right away instead of having to wait for me to transfer to them. Cheers!

@tombuck

Жыл бұрын

I tried this and couldn’t get it to work unfortunately. I agree it would be an awesome bit of redundancy. If you need a backup though, you can run it through an XLR recorder like the Rodecaster and then also record via software on your computer (this is true for any XLR mic).

@primo8825

Жыл бұрын

@@tombuck what a shame. Thanks for trying! And yeah that's what I do, except with the sound devices mix pre :)

Hey Tom! What about using two NT1’s or two condenser microphones in a small room for recording a podcast? How would you deal with the bleed? (I switched to two SM7B’s as they tend to catch less of the sound coming not directly frontal). What would you use?

@mikolhan1

Жыл бұрын

Haha, got my answer around 15/16th minute ;)

@tombuck

Жыл бұрын

Glad the video helped, but to add to it, the biggest thing is really just understanding the mics' pickup patterns. Multiple NT1's or other condensers are super common on podcasts. Usually positioning them around 45 degree angles from each other helps to prevent much bleed and then things sound terrific.

I REALLY LIKE THE 4 GEN SOUND...I THINK ITS SOUND SMOOTHER

Thank you

@tombuck

8 ай бұрын

Hope it was helpful!

Oh sorry. I just read your description. I think i’ll manage. Thanks anyway. Martin. (The Netherlands).

A real selling point on these Rode mics are the very low self noise of 4 dB.

@tombuck

Жыл бұрын

Yeah! They are ridiculously quiet.

I love the sound of-NT1 5th Generation and would only be using it for personal use, chatting with friends etc. Would be using it in an untreated room aka my bedroom, some have said it picks up too much sound in an untreated environment so I was a bit hesitant. Like I said Im not using it for professional use I don't mind if it picks up an occasional motorcycle speeding by I just wouldn't want to hear echoes. Other mics Ive looked into were the rode podcast mic usb and the rode nt usb. Any input/suggestions you could provide would be greatly appreciated.

The beta for the RCP 2 supports 32 bit integer

Hi Tom, which microphone stand are you using in this video for the NT1?

Hi Tom, do you know where we can get cables that match the colors of the RCPII? Mic cable, and 1/4 to 3.5mm cables

@tombuck

Жыл бұрын

Rode now has XLR cables! They’re the perfect shades of each color. I would start there and use adapters as needed. Their headphone cables are good for 3.5mm.

The4th gen is warmer in sound. Offering a bit more low end.

The fact that the audio is not very different from the NT USB+ convinced me that I should get it over the NT1 and get a week of groceries instead! :)

@tombuck

Жыл бұрын

I LOVE the sound of the NT-USB+. If you're primarily planning to use it via USB, then that's a great way to go, especially since it offers more physical controls and a headphone output.

Tha BEST 👏

Thank you for all you said. I am a beginner and just bought this mic. Hope you can tell me how to get the software for the Rode nt1 fifth gen. Thanks a lot. Martin ( the Netherlands) thanks again.

Hello, which of the two is better to reject plusive, Rode SM6 , Rode SMR Shockmount ?

The 145db spl is what makes it worth the upgrade

As for the Condenser vs. Dynamic, i think that for a room, with no treatment, Dynamic is the best. I've tried a 20€ fifine condenser mic, and it sounds good, with no echo once setup, while a more expensive (and worse by any means, don't buy them, please) blue yeti sounds awful, even after the setup of an EQ, echo all over the place.

What micro would you recommend for untreated space environment? Just for my house, I want to record audiobooks.

@tombuck

4 ай бұрын

A very general rule of thumb is that condensers are better for untreated spaces (although I would encourage you to go with whatever you like the sound of). The SM7B is a classic if you have enough preamp power to run it. The Shure MV7 is a more budget friendly dynamic alternative.

Please, Professor, please advise me scientifically and professionally, which is better for my home studio because I cannot judge which of these microphones to buy, bearing in mind that I bought Universal Audio 2 as an audio interface and wires from Mogami. Should I buy the Rode Signature Series or the Lewitt LCT 240 Pro?

@tombuck

5 ай бұрын

Honestly, both mics are wonderful and have a VERY similar sound so you really can't go wrong either way. I think you can get the Lewitt with a shock mount for a bit less money than the Rode, so if you're on a budget, that might be the way to go. Depending on where you buy from, you could order both, try them out, and then return the one that you don't like. Sometimes the best way to choose is to use things in your specific environment with your exact setup.

@Everyonesvoice2024

5 ай бұрын

@@tombuck thank you so much

always my bet mic teacher on KZread @Tom Buck, Great Work Bro

Hey Tom! would you say the Audio-Technica BP40 still holds up? Thinking about upgrading for voice overs

@tombuck

6 ай бұрын

I've never used the BP40 myself, so I can't say. I do know that every AT product I've ever used has been incredibly durable .

@ChrisDubbss

6 ай бұрын

@@tombuck thanks for the reply and feedback!

if i wanted to shoot both podcasts, voiceovers, and singers would you recommend this or the podmic usb?

@tombuck

Жыл бұрын

I think this would be a bit more versatile, especially for singing. Although if you’re planning to use it mainly through USB you might prefer the additional physical controls on the PodMic.

Rode NT1 5th USB Version VS Rode NT USB+ which do you think is better for rap vocals, youtube and twitch?

@tombuck

Жыл бұрын

Honestly, I think either will perform well for that, so it really depends on whether or not you like the way one sounds more than the other. If you're planning to mainly use it via USB, then I'd recommend the NT-USB+ because it has more physical controls and a headphone output.

NT1 5th generation Only the USB connection has the 32-bit float？ what about the XLR connection？ thanks

Rodecaster Pro II allows to export in 32 bit float… Some test and no clipping

@tombuck

Жыл бұрын

I know there’s a 32 bit export option, but I’m honestly not sure if it’s the same as recording in 32 bit? 🤔

@wavensdorvad

Жыл бұрын

@@tombuck me neither. Tried to clip with NT1 5th, exported on 32 and it wasn’t clipping. Perhaps you could try too to check if I’m correct or not. Cheers!

4th Gen for me too. Less sibilance

Has anyone found these colored windscreens for the Samson Q9U?

@tombuck

Жыл бұрын

I haven't found specific ones, but the PodMic ones can be shimmied to fit.

The new one has a brighter sound

Do you guys think it’s a good idea to trade in my rode nt1 for a sm7b my room is super noisy from fan, cars, my bird being mad and I should’ve done better research and I tried speaking close up to the mid and Turing up the gain but I still sound quite with the background being equally as loud 2what should I do?

@lizardpeter

7 ай бұрын

I wouldn’t trade for it. I have SM7b and notice a sort of white noise in the background due to the high noise floor as a result of having to crank up gain to get usable levels out of SM7b (even with Cloudlifter and a good pre-amp).

How do u get that crisp and crunchy sound from ur mics? Mine sounds very normal.

Tom do you have a video on how to EQ this microphone? Im using the rode castor duo

@tombuck

9 ай бұрын

I’ve been sticking with the default NT1 preset for the most part and like it quite a bit.

@Boofcan

9 ай бұрын

@@tombuck Ive been playing with it, I like it a lot, but it’s pretty harsh on sibilance with my voice even when tilting the mic and using a de-esser. I’m going to treat my room & I ordered a wind shield. Hopefully it helps :) love the videos man

@coleedwards1634

8 ай бұрын

What is your experience with it in an untreated room?@@Boofcan

@Boofcan

8 ай бұрын

@@coleedwards1634 it still sounds good but will be a night and day difference with the foam paneling. I actually foam paneled my room the other day. I still didn’t think the microphone was the best fit for my voice and went with the Neat King Bee II instead and it sounds amazing!

Tom, I am confused between Rode NT 1 5TH GEN AND LEWIT 440 PURE I am searching for a mic for voice over and podcasting

@tombuck

5 ай бұрын

Honestly, they're both absolutely excellent. I don't know that I could choose a favorite between them. They do have different sounds, but both are great and very easy to EQ. It might just come down to which fits your budget more and/or even something as simple as which one you like the looks of more 🤷🏻‍♂️

Is this 🎤 good for ASMR? And can it be hooked up to a phone to recorder it? Or is it only for computers 🖥 🤔

@coleedwards1634

8 ай бұрын

Did you ever purchase it?good for asmr content?

Has anyone used one of these with a super clacky keyboard behind it? Does it pick up all that sound? My MV7 just stopped working but I love the sound of this mic im just wondering what the sound elimination is like if theres a fan in the room or a clacky keyboard.

@tombuck

Жыл бұрын

It’ll likely pick up a little more room sound than the MV7, but it’s not too bad. And the quality is terrific.

I am using the NT1 (4th gen, exactly the one you have) in a untreated room with wave XLR interface, with the USB option, will I get the rode connect software filter with the 5th Gen even I am using a none-rode interface?

@tombuck

10 ай бұрын

AS I understand it, once you adjust the settings with the software they'll stay that way anytime you use it as a USB mic with or without the Rode software, but it won't apply to XLR>

@ivanchan8293

10 ай бұрын

thanks for the reply, so I would be better off getting the Rode Streamer X to try to fix the the background noise from the original NT1? was trying to avoid to replace the interface @@tombuck​

@coleedwards1634

8 ай бұрын

what has been your experience with it in a untreated room?

Good for music?

Had no idea this could record 32 bit float! I have a TLM 102 but want to downgrade and get 2 cheaper mics

@tombuck

Жыл бұрын

It’s a great one! I really love the sound from it.

@seanq9884

Жыл бұрын

You should. There are better mics out there for much cheaper.

I hear the difference but I like the old

Hi Tom, Is it possible to connect the NT1 5th with usb-c to Android mobile phones?

@tombuck

Жыл бұрын

In theory, yes- but I don’t have one to test it for sure.

@shahab9547

Жыл бұрын

@@tombuck thanks Tom

How does it perform against Shure mv7?

@tombuck

Жыл бұрын

It has a brighter sound and USB C is a plus, but the MV7 has more on-mic functionality, including a headphone output.

@Bangtang_Aje

Жыл бұрын

@@tombuck Thank you. I think i am gonna keep my Sm7.

Rode nt1 5gen vs Rode NT2-A ??

@tombuck

5 ай бұрын

Oooh, I've never used the NT2-A so I can't really say, but it definitely does seem like an awesome mic. Wonder if it'll get an update any time soon?

How did you get a floor stand to hold this mic? It’s so heavy

@tombuck

8 сағат бұрын

In this video I only had it on tabletop stands, but they held it just fine 👍

@randomrachel1232

7 сағат бұрын

@@tombuck yeah mine is on one now but not enough room for table in room I’m using

I thought the fourth generation mic sounded better. It is unlikely that Rode changed the internal specs for the mic. The big change is the USB input. 32 bit recording is not a function of the mic, it is a function of your audio recorder. I have heard experts question whether most mics can even take advantage 32 bit/192 htz recording. So it is possible that Rode improved the RT1 mic's ability to handle high bit rates. However, if this was true, then Rode would not say that the sound was unchanged. Also, to create a mic with the ability to handle 32 bit and 192 htz recording is likely going to be VERY expensive. So I doubt that the 5th gen RT1 handles 32 bit recording any better than the 4th generation.

@tombuck

Жыл бұрын

From what I understand (and admittedly I'm no expert on this), there is new hardware inside the mic that allows for it to handle processing and 32 bit float.

@franklong6269

Жыл бұрын

@@tombuck I am no expert either, but I have listened to sound experts address 32 bit/192 htz recording and say that very few mics are capable of capturing that massive scope of sound. In a way it makes sense because this is cutting edge technology. The sheer amount of information that a mic must input for 32 bit / 192 htz recording is staggering. It will be interesting to see how the microphone industry responds. But a second issue arises in that even if the mic is capable of competently inputting all of this information, a substantial part of it is beyond the range of human hearing. So measuring equipment must be used to even check if the mic is indeed capturing all of the information and range. I have a Tascam X8 audio recorder that is capable of recording 32 bit/192 htz files. But I have not used 32 bit recording because of the massive file sizes and because I question whether any differences will be discernible in my recordings. I record original songs that I write on guitar, which do have a very wide vocal range. So I only care about the range of sound that the human ear can detect. The Tascam X8 does provide protection against clipping in very low ranges and very high ranges if I use 32 bit recording, but in real world use, I have found it very difficult to make audio recordings clip when using 24 bit/44.1 htz recording parameters. For "high-end" musical recordings (like Tidal) that streaming services offer, It is my understanding that they use 24 bit/96 htz recording settings. So that would appear to be the top-end range that the human ear can actually discern. However, I am learning about these audio engineering principles right now and so there is a lot that I do not fully understand. I do find my 24 bit/44.1 htz recordings to be excellent. Since many streaming services may not accept 96 htz recording rates, I have not used that setting yet, though the X8 will record at 96 htz easily. All this comes back to the original question, what exactly would Rode do to its NT1 Mic to facilitate 32 bit recording? Perhaps add better input capturing range? But that would be VERY expensive and I don't think they could sell the mic for $250.00 if that was the case. Also, doe the Gen 5 Rode NT1 record a 96 htz and 192 htz rates better than the Gen 4 NT1? That might be possible with a hardware change in the mic circuit board. I would like to hear Rode's sound engineers address these questions because 32 bit recording will be the future standard for the audio industry in my opinion.

Did you really say: "You don't need any additional adapter to mount this shock mount?" If you use an Elgato wave arm (which happens to have a 1/4 inch mount) you *do* need an adapter 3/8 on 1/4! 😛

@tombuck

9 ай бұрын

HAha, Elgato is definitely the odd one out by choosing to make 1/4 20 they're standard mic mount 🤷🏻‍♂️

Hmmm, One my office isn't treated because unlike you I use my office for all kinds of things. So as much as I love the Earthworks Ethos, my standard Mic is the Rode Procaster, to my voice is a cheaper version of the Shure SM-7B. The mic (NT1-5th) is puzzling to me. As you say it a very good XLR mic but then you basically paid for all the stuff (4 D/A converted etc) for nothing. And if you're using it as a USB Mic again, it's very good, but you can't monitor it now their logic is, well it's 32-bit so you don't need to, but that a BAD habit we don't want to start! My podcast is Audio only so I don't care how big the mic is. But if you're doing a video that mic with Pop filter is HUGE and is NOT something I think you should use. The Earthworks mic is great as you can be 6 to 8 inches away and still get great sound and is out of the way. Ok, that is my professional thought on the subject.

@tombuck

Жыл бұрын

I think your combo of Earthworks and Procaster is quite a winning one. Really covers just about all the bases and scenarios.

Hi Rode NT1 5th Generation or shure mv7 ?! Best For youtube video ❤🙏🫠🥺

@tombuck

5 ай бұрын

It really comes down to whether you prefer a condenser sound or a dynamic sound. I’d lean towards the NT1 personally 👍

@motivationshort630

5 ай бұрын

@@tombuck Thanks Tom♥️, my room is not acoustic. Is nt 1 still a good option?

the 440 pure sounds like the rode if it was improved

16:49 imo rode's mic sounds a lot better than shure sm7b. It is a lot more clear. Sure's mic sounds like a cheap mic in a sock

@tombuck

Жыл бұрын

The SM7B sounds much more muddy in comparison, but from what I know, it's also intended to be EQ'd (so it's almost like the most flat/neutral sound profile possible to start with).

i remember back when pewdiepie used to use it

It is not MFI compliant, it does not work with smartphones via USB. Bummer. I remain with my 4th gen.

@Brani1974

Жыл бұрын

Really? I saw another review where a guy had it connected to an iPhone and it worked (allegedly with slightly less gain)

@ww1www

Жыл бұрын

@@Brani1974 I asked Rode twice. Both times they replied it was not compatible with smartphones and recommended the NT USB +.

@Brani1974

Жыл бұрын

@@ww1www kzread.info/dash/bejne/laB_tteTcs_KhtY.html 10min 30s. But I guess it's just not 100% compatible which is a shame yes

Everything is so colourful around you. I question your mental state.

@tombuck

Жыл бұрын

The outside matches the inside.

@enchantederic3792

11 ай бұрын

@@tombuck i wasn't going to ask ... but, where did you get the desk cover? i love it as well as the multi-colors everywhere!

That shockmount is the worst, cheapest piece of crap of any mic I've ever owned.

The branding is getting bigger and bigger in Rode products..lol

@tombuck

Жыл бұрын

It’s bigger on this one but fortunately still semi-subtle 😬