The pipe sounds awesome and of course the"ol' muffler falling off" routine seems to plague us all lol thanks for sharing 👍🏾😁

@trentbikes

6 ай бұрын

Lol

@DannydeGalicia

5 ай бұрын

I had to re-revit and repack mine. No more falling off. I used RTV red to seal both ends.... I wouldn't say its the best sealer but no leaks yet since it doesnt get as hot and is not dnagling from the previous user. Maybe i'll use a semi clay like a muffler sealer that's easily breakable.

Ur such a damn wild man on that thing🤘👽🚵‍♂️💥💨

In the middle of finally making mine , got a Athena from don butler , and the same pipe as you , but enough of all that , love your content man keep it up

Haha Fk ya! My fav memory of my last motorized bike was going wide open at 630am in a snow storm 8 inches of snow already on the ground, passing cars all the way to work.. studded my own bike tires with screws 🤣 time of my life. Your bike sounds nuts!

You can ditch the derailer and retain some ability to change gearing by shortening the chain enough to fit over the bigger (shorter) gears but not slip on the smaller (taller) gears

@trentbikes

6 ай бұрын

I know

The pipe looks and works a lot better on the bottom. Sounds and runs really nice bro

@trentbikes

6 ай бұрын

yessir

@SuperTrikeBicycle.

6 ай бұрын

​@@trentbikes do you have a link for that pipe?. My new bike is going to get the 6hp. I'd like to get that same set up.

@trentbikes

6 ай бұрын

@@SuperTrikeBicycle. it's in the description, you can look up rmh minarelli racing pipe.

@SuperTrikeBicycle.

6 ай бұрын

​@@trentbikes thanks. Wow $275.

@trentbikes

6 ай бұрын

@@SuperTrikeBicycle. You can wait until it's on sale or price drop, just recently it was $230.

The Jog Pipe has been around for over 40 years an works Great,, But yes cylinders need Correct pipe size to Make good Power, An Tuning is where it's at 👽👍🏻 Good Luck 🚴🏼‍♂💥☁☁☁

@trentbikes

6 ай бұрын

cant wait for the athena. but i'd like to try to get the most out of my minarelli

@Op1zilla

6 ай бұрын

@@trentbikes Parma kit cdi from Treatland, try it on this cylinder an then on the Athena, Fast Boi Stuff, an that timing plate 👽👍🏻 🛸💥💨💨💨

@leonardarola

5 ай бұрын

For forty years?!

@Op1zilla

5 ай бұрын

@@leonardarola plus 👽👍

The pipe looks great,and sounds it too.The $ are just way above my scale.Yes,I know titanium is costly,and the time to weld it is worth the price as the skills are worth the $,but I just want to move,not race. :) Good luck,and have fun.

Nice ride man but I waiting you when the snow drop tune your bike I’m back for Minarelli dual hé hé !!!!

With the stuff you are doing, a mini hobby lathe capable of cutting metal would be a great addition to your workshop. Glad to see another video upload!

@trentbikes

6 ай бұрын

yeah I should get one. you know one you would recommend for a price i can afford?

@franklindubray

6 ай бұрын

the harbor freight mini lathes are really good@@trentbikes

@trentbikes

6 ай бұрын

@franklindubray yeah idk those are quite expensive. What about the vevor ones? 7x14" 550w, metal lathe on amazon

Looks and sounds awesome brother what I do where my mz65 meets the Silencer i use a piece of high pressure hose it's not that hot anyway I got the idea from my enduro motorcycle from the late 70s that's how Suzuki did it I use 2 hoses clamps the rubber kinda absorbers the vibration between the two that's my opinion but I've never had any more problems with it coming apart ride safe brother 👍

@trentbikes

6 ай бұрын

yea

Your bike build is fing insane!!!!!! ❤

@trentbikes

Ай бұрын

It's meh, my 70cc athena sport felt faker bike is way better

Sounds like peter griphen from family guy

Broo you got that tesla coil and this high frequency hv transformer, where’s that from?

Got the same pipe . Yet to install it yet. Sounds awesome tho. See how she holds up

@trentbikes

6 ай бұрын

pipes great

I'm going to use the sx65 flange and rubber mounts with the rubber flex on the muffler just like the bike to isolate the engine and pipe so it doesn't break off... On the B boy header I would put some hi temp O rings in there MLM bleed pipe is something if you want it quiet

@trentbikes

6 ай бұрын

For the rmh pipe? I'd use flanges that comes with it. They're designed to run the best

@jasonburque

6 ай бұрын

@@trentbikes RMH is a great pipe... KTM, Honda etc... Is better... Same deal with a Stihl cylinder.. millions more made and sold for decades with billions of dollars in R&D

Sorry I feel like a troll mentioning it again but the inlet. I googled minarelli vertical big valve: Polini do polini big valve, MXS do a reed valve , nuraku and a few others, i reckon you'd gain an easy 3-4 bhp. The minarelli am6 motorcycle engine has similar bore/ stroke, they are used in road and off-road style bikes, high and low styles, wonder if it would be easier to adapt them. Btw the MXS racing 70 kit is good for 20bhp if you have patrion that would be a good buy.

Nice editing man. Really jealous of your build. It really pulls. Like watching your videos very much. Much love from the Czech Republic.❤

@trentbikes

6 ай бұрын

Thanks

Sounds good man for not being tuned 👌🏼 you’ll get her tuned once it warms up some💪🏼💪🏼

@trentbikes

6 ай бұрын

yea need to get her tuned

@justanothermotorizedbikech5138

6 ай бұрын

@@trentbikes check for any possible air leaks with brake cleaners before tuning again

@trentbikes

6 ай бұрын

@@justanothermotorizedbikech5138 yep

Do your beast on that bike. Props for pulling high RPMs just be a little safer at 50 it'll probably hurt like hell to go down

Mannn imagine with just bicycle doin 80kmh/50mph 🤯🤯

@trentbikes

5 ай бұрын

Theres people out there who goes faster than that on bicycles. And im going to be one of them

@user-ly8mj8ox6h

5 ай бұрын

@@trentbikes i will love to see that vid and good luck to do that and stay safe doing those speeds

If the header to pipe is really lose,try cutting up an aluminum soda pop can and make yourself a shim. Fixing this single leak should get you where the pipe should have been to start with.

@trentbikes

Ай бұрын

Hmm never thought of It thanks

Running rich will eat fuel to

Did they give that pipe to you forever or you will send it back to them?

@trentbikes

6 ай бұрын

Forever of course i dont think they would even expect you to send them back lol, you'd just say fuck off and keep it 😂

@damnthiccassboye7138

6 ай бұрын

@@trentbikes when are you going to test the athena cylinder with the pipe, must have an amazone powerband

@trentbikes

6 ай бұрын

@@damnthiccassboye7138 Next month for sure, or at least the video will be uploaded until then. I can't wait to try it out

Those little bike tires fold. The best I’ve seen is moped dot wheels and then the bicycle frame fails. Don’t mind bicycle tires either lmao this stuff isn’t made for 30-55 mph with a 200x rider y’all are going to walk crooked with a cracked hip

@trentbikes

6 ай бұрын

oh come on lmao i go 40-50mph all the time, about 300-400+ miles on the tires, wheels with no issues

@tytraulich4987

6 ай бұрын

25mph you will break your wrists if you are out of shape. 30-55 you are looking at a waking disibility, you break your hip wrong it’s gonna stay like that. Probs have back pain too. Motorcyclist do all the time. You are on a lawn chair

@trentbikes

6 ай бұрын

@@tytraulich4987 ok lets see about that then

What engine is this?

@trentbikes

6 ай бұрын

Bicycle engine with minarelli (scooter cylinder) converted to it

We can't even ride ours legally on the roads here in UK, can even cause us to loos car driving licence.!

That burp was disgusting

@trentbikes

17 күн бұрын

@@danajett thanks

Dude foreal I know it's fun to go fast but riding like that man one day you are gonna get hurt. Those rim bearings you're riding on are gonna lock up when you least expect it and going that fast man it's very dangerous. It happened to me once doing about 20 mph and I went over the handlebars luckily I was crusin but if it happened going that fast I'm sure the outcome wouldn't be pretty hope you think about it if you wanna do it be safe get some ghetto bike wheels good luck I pray you listen

@trentbikes

2 ай бұрын

Check your bike occasionally, do maintenance on the wheels, etc. I already built a felt faker bike, and soon to upgrade to gemini wheels in the future.

Why on gods earth is it quieter without a silencer????

@trentbikes

2 ай бұрын

Are you talking about the 50cc jog pipe one?

Sounds like peter griphen from family guy

@trentbikes

6 ай бұрын

thanks im deaf

@awakenotwoke2643

6 ай бұрын

Shut up Meg😂👍