Finally got my 17 mm hex kit now I just gotta order my wheels.

@CSL33

22 күн бұрын

17mm?!? You people are just ridiculous... I'm out!

I'm really regretting wasting my money on my Rlaarlo omni terminator RZ001B-C. Motor died one of the esc 3 motor connections slower let loose. So I'm putting 3652 3500kv Motor and 60amp esc Sensed system. And GT5 controller. Great video mate 👍😆

@brandjayfab

18 күн бұрын

Mine is now just sitting on a shelf

@Hungrybird474

2 күн бұрын

I m beating the piss out of mine on a dbl sided ramp . Back and forth jumps constantly except not the last couple days . I wore out all the outdrive cups driving with the 30% turbo on I think is what made it happen . It never broke , just showed a lot of wear in the rear , already changed . Fronts are going . The wheels get wobbly then ya know 👍. So you guys don’t like it ?

Dang bro ! That sounds awesome . Man , that truck is getting down. That’s wild a f 👍.you got that OT tuned nice

@OmniMan_Racing

22 күн бұрын

It does good for 2s

I honestly don't know why people keep saying you have to buy parts I mean I have spent the last nine days with my nephews everyday we're at the skatepark jumping these things we're out by the lake we're out but this way we have gone through I can't I would probably say at least an average of 20 batteries a day and nothing is broke. The only thing I had a problem with is the bottom screws where you have to change the motor mount and stuff but the company sent me brand new ones not only that they sent me a package of every possible screw I may ever need and it was amazing I'm going to upload it to you later tonight

Well, if anything.. you're having fun while finding the weak points of the truck. 👍

I see you added the upgrade tire nuts. What kind of wrench do you use on those?

@OmniMan_Racing

21 күн бұрын

17mm socket wrench or 17mm cross wrench that comes with nearly every 1/8 car stock

You need to adjust the limit screws of the 4 swing arms! Let the maximum travel of the shock absorber be buffered by the chassis! This can reduce shock absorber damage! Now the shock absorber reaches the maximum stroke force!

@djtazzmtl

18 күн бұрын

You mean the droop screws?

Has anyone found what outdrive diff cups work ? They’re 9 mm x 21 mm with the hole . Found a 10mm x21mm , found Rlaarlo’s but it takes a month to get here .

@OmniMan_Racing

8 күн бұрын

That's the only known option

@Hungrybird474

2 күн бұрын

I tried some Losi ones that were the same size but the hole for the pin needed just wee lil bit to fit good . Didn’t use them , ordered from rlaarlo but dammit I didn’t get the s2 outdrives . Oh yeah l what kind of tires for the 17mm hubs ? Thanks . I wasn’t thinking I’d new need new tires at the time of ordering . I like the stock tires

My truck doesn't drive straight, it veers to the right. Is it damaged out of the box, or can I make some adjustments?

@OmniMan_Racing

6 сағат бұрын

Adjust the steering trim on the transmitter

I can't believe what I did yesterday I was able to run two full 4S 3300 mAh 80c light bulbs with 120 amp and a 6500 KV motor now I think the reason the motor didn't get as hot as I thought it would is instead of using the 2018 pinion I used a 19 T pinion and oh my god did it have the most insane torque Jesus christ. But for every day I'll just use the 3s 120 C battery but I got five new opinions in today and I'm going to test them out there

@OmniMan_Racing

Күн бұрын

6500kv on 4s in a basher monster truck sounds like a fire hazard

@JesseBlum

Күн бұрын

@@OmniMan_Racing that's what I thought. But I saw a few other people doing it and then I bought these new fans that have like a thermostat and they kick on you after like a certain degree. And they never kicked on once with a 3s 120 c battery I was also you know I was hitting it hard so it should have been and I thought I might as well try this 4s. After I successfully go through 10 full 4s batterys without issue I'll upload it

@JesseBlum

5 сағат бұрын

@OmniMan_Racing after the day that we had bashing yesterday I can confidently say that people who don't run a 4S on the 6500 KV at least through Spectrum the motor that I got is all I'm saying I'm missing out and if they have ran it and it's got too hot it's because they're using two large of a pinion. I tried using a 2017 Pinon but the motor got way too hot and plus it had hardly any torque it was annoying. So I went down to a 19t and omg it's absolutely amazing. I ran it hard we had fun I went through two for us batteries and those were 4,000 mAh and that ADC nothing got hot nothing was overheated it was awesome

Does anyone know about 4s backflip tires instead of the copperhead 2 on a Kraton 6s ? The copperheads are decent but if I can get some better handling that would be awesome. I seen the nice belted ones too . Some kind of snake name . Stick copperheads are 6.5 , 6s backflips are like 6.8 and the 4s backflips are 6.1” high . I dunno , kicking it around

@OmniMan_Racing

22 күн бұрын

Way too big for a truck this size. These trucks are the same wheelbase as a 1/10 touring car

Are the s2 cups the upgraded ones ? That’s a lot of power but anything for science and pushing the limits 👍

@OmniMan_Racing

22 күн бұрын

Yeah these are supposed to be upgrades. I didn't do the s2 dogbones just the cups but I don't imagine with matching dogbones it would have stood up any better

@insanebmxthomas

21 күн бұрын

@@OmniMan_Racing from what i can gather from edisons statements, they always kept the diff cups softer than the dogbone pins. For both sets, standard, and s2. Mixing them (standard and s2 parts) might result in having a harder diff cup than the dogbone which could be the problem here. I would expect (but all bets are off imho) that a pure s2 setup would fare better. Plus, you're pretty hard on the car, assuming that 'blipping' the throttle and doing the self-righting thing 20 times in a row puts wear on the diffcups. Because i think it's odd that the diffcups only show wear in one direction usually. Can't be the self righting thing then, can it?

@OmniMan_Racing

21 күн бұрын

@@insanebmxthomas we'll see on the next round of mods. I definitely am not easy on this thing even when I say I'm gonna take it easy 😅

@insanebmxthomas

21 күн бұрын

​@@OmniMan_Racing Ha i was questioning whether to say that, but i'm honest. Good to see that you're aware of that, i'm just here to take advantage of you filming it all, so thank you for that!

@jonm2884

21 күн бұрын

@@OmniMan_Racing Just thinking out loud, but do the front CVDs fit the rear? If so they may be better?

Bummer, i orderd 2s dog bones after youre last video, i hope they will hold up for a while. I like the car but I dont know if its worth buying parts over and over lol Then again I'm new to the hobby, maby they are all like this, Im pretty hard on it.