I don’t know why I turn wrenches all day then come home and watch a guy turn wrenches on KZread but yet here I am 😂 Great content man, love to see an honest experienced tech out there do what’s right for customers 👍

@papatrunk66

2 жыл бұрын

Lol, as a 30 year electrician I can’t even come home after work and change the lightbulb

@BluRay87

2 жыл бұрын

I work at a car rental and detail cars. To get off work (sometimes while at work) and watch people detail cars. It’s satisfying is all. Lol

@s0locup738

2 жыл бұрын

@@BluRay87 yeah it is lol. I suppose we just like to see how other people in our industry do their work

@Straight_White_Fatherly_Figure

2 жыл бұрын

I tell people to change their air filters more often then i ever want to change my own 😅

@chadb.6165

2 жыл бұрын

I wake up and watch it so it kick starts my brain before going to work at the shop. lol this and coffee and I'm ready to go.

This dude's honest commentary and complete lack of curse words is extraordinary. Not to not mention automotive skills.

In the future, the easiest way to remove the passenger axle is to remove the drivers axle (which naturally pops out easier as it’s shorter and easier to get too) then use a long extension through the entire transmission, through the differential to the passenger seal, and lightly tap the extension with a rubber mallet onto the axle spline shaft. It’ll pop out comically easy since you are applying central pressure and the C clip won’t hang it up.

The Canadian flag and "It had achieved FREEDOM!" killed me. Love it and your work even from up north.

@GoatzombieBubba

Жыл бұрын

And Canada is full blown Tyrannical Nanny State now.

The Canadian flag when you say FREEDOM is the bombdigity . Well done . I was born and raised on the Canadian border in " northern " NY . I am so proud of our brothers and sisters to the north.

Did anyone else laugh when he said “It looks like you and my prybar are going to have to share the same hole”? Or is it just my messed up brain?😂

@darenliddle4411

2 жыл бұрын

no its my messed up brain as well

@hughwelsh201

2 жыл бұрын

I laughed, thought about it laughed again. Then he throws the "should have used lube" into it. MEH, only Ray can get away with that one, come to think of it does the wife have the same sentiment. Ray, just keep up the good work, oh and as an after thought while this rain from cyclone Dovi pours down, maybe the writer of the pinned comment should find a quiet dark corner and find the use of some lube on himself.

@johnbryan5243

2 жыл бұрын

Your brain

@DJTourniquet

2 жыл бұрын

You are definitely not alone man, anyone that says ya are is a liar.

@johnfrederiksen5166

2 жыл бұрын

Nope .. I just thought "huh, that should make for an interesting evening.." :| :)

Hey Ray, a tip from an Aussie Shop that replaces, rebuilds & reboots CV's all day.. You see that rusty coloured inner joint housing has small notches on it. If the C Clip is stuck, use a chisel and a hammer in one or more of those notches to release the inner joint. This is the best way to avoid housing damage.

@bigpete2525

Жыл бұрын

Why couldn’t the boots just be replaced if the drive shafts were ok?

@benwalpole5099

Жыл бұрын

Big Pete exactly cv boot is about £20

@mementomori4972

Жыл бұрын

@@bigpete2525 That was exactly what I was thinking. If the joints are not worn, why is it necessary to replace the drive shafts and not just the boots?

@deegee2416

Жыл бұрын

​@@mementomori4972 I was thinking the same thing, that these mechanics had a special way just to replace the boots. Because don't you still have to take the axle off to replace the boot? That's the problem. You are still doing the labor of replacing CV axle versus the cost of the boot. My dad had to replace a broken boot. He tried the cv split boot kit. Where you just glue it on, but it didn't work, the boot ripped and failed twice. So he decided to replace the whole axle. Because I believe the price of the axle was not much more to replace the boot. It's just the labor that is costly.

@mementomori4972

Жыл бұрын

@@deegee2416 No, you don;t have to take the axle off. You just have to pull the hub assembly from the drive shafts, replace the boots and screw it back together. It's a 20min job for the front axle.

When I was working on cars I always had a large group of repeat customers because of the same practices you follow. Be honest and make customers aware of what you find and what needs repairs and what can be left go for later when it fits their budget. People trust you when your honest even though the shop doesn't like it much because most only care about profits. I used to have an old Russian Immigrant who was on SSI and paid me with groceries, mostly meats and bread he got on markdown because nobody else would help him keep his car running.

@charleshines1553

2 жыл бұрын

That because they know you are not a con artist!!

@robertmaybeth3434

Жыл бұрын

you're good people MLT.

@michaelpressman7203

Жыл бұрын

I love trading I got two antique kerosene lanterns for doing electrical job and a tune-up on my friend's car it turned out a squirrel built the nest in her airtake air intake in the car couldn't breathe it turned out when I cleaned it out and did a couple other things that I got from Ray well hands the car runs fantastic she sent me cookies tonight black and white cookies a whole box of them oh man I have to behave it almost set my bedtime hey guys have a good night

On behalf of my fellow Canadiens thank you for your support.

I think he would be narrating out loud to himself even if the cameras weren't there. Love the videos

@JeffHendricks

2 жыл бұрын

I mean... doesn't everybody?

@jimmeade2976

2 жыл бұрын

Talking to yourself is assuring that someone intelligent is listening ... I do it all the time

@Draxindustries1

2 жыл бұрын

I think he would argue with himself too out loud. I know I do and I always lose the argument..

@sydecarnutz972

Жыл бұрын

You should hear him the morning tying his shoes! LOL

Ray, I have been watching your videos/channel - almost binge watching - for the last 2 weeks straight. I am impressed! Not so much with the great repairs and the way you exemplify what is best about the trade, but with your moral courage and determination to uphold a standard of honesty and integrity. That is what makes you shine most and your audience, thus far after reading thousands of comments, fully agrees with me on that point. Keep up the fantastic work!

@usethenoodle

2 жыл бұрын

Yes, and well said. The guys who had this vehicle before Rainman, give the whole trade a buyer be ware reputation. Sad.

@phreakyzeke2864

Жыл бұрын

Words < actions.

@Arellanog123

Жыл бұрын

This is literally me the last two weeks as well. Idek how I came across him. But glad I did!

@michaelpressman7203

Жыл бұрын

I did a bunch of work on my car in the last few weeks all thanks to Ray he inspired me he showed me ways to do stuff and I just got into it for a few dollars I got my car running late and a few problems straightened out thank you very much Ray have a good evening

@metalgearsolidsnake6978

Жыл бұрын

Spiderman no way home

This is why so many respect you. You don't put your interests in front of others. You are more of a partner and advisor.

Here in Lithuania we just change that rubber on CV joint and thats it. 30min job :)

@twentysevenlitres

2 жыл бұрын

Same in Oz. Or replace the outer CV joint only and be done with it.

@BMWe-ed2tn

2 жыл бұрын

Yeah that felt like a total waste replacing the axles for torn boots :(

I work at a reputable shop that spends almost $0 on advertising. Its all word of mouth. We would rather you keep coming back and make more money off of you by being honest every time, rather than take you for a ride 1 time and never see you again. 3rd generations are coming in because their grandparents have been coming here since the 70s. And nothing gives me more pride than to help a female not get taken for a ride. My wife is lucky to have me to keep that from happening to her. Too many get taken for a ride and it makes all of us in this profession look bad.

@bobhudson6659

2 жыл бұрын

Amen. What is the adage. Do unto others as you would have done unto you. Unfortunately many people have the adage of "I can do it you but don't you dare do it to me". But eventually those "reap what they sow". You are also reaping what you sow by having repeat customers - they are the best business you can get - in any profession.

@juergenbertram7312

2 жыл бұрын

@@bobhudson6659 , some shops think in terms of 'what can I do you for ?' !!

@mmix224

2 жыл бұрын

So question. What do you guys do with DIY'ers who screw it up? We jokingly call it the "stupid tax" when we have to replace missing brake hardware, or cross threaded lug nuts and studs cuz the diy'er messed it up. Need a new stud or caliper bracket bolt? You're going to pay extra.

@phil1pd

2 жыл бұрын

Well said!

@FlatLine8412

2 жыл бұрын

@@juergenbertram7312 that applies to the "know it all" lol. The ones that are humble enough to learn we dont have a problem with lol.

Being an old "shade tree" mechanic, I can fully appreciate these videos. Getting things apart is 75% of the battle so not being around to reassemble this one is no bother for me.

@michaelpressman7203

Жыл бұрын

Knowing Ray if you would have had the right parts when he needed them he would have finished the job that day and then left but it didn't work out that way have a good evening

I was going to comment about how impressed I was at you getting these parts for a VW so fast...and then they didn't fit. But oh well, still impressed at how clean this Passsat looked and still going with over 212k miles. You easy going demeanor makes the videos entertaining and fun to watch.

@Swampster70

2 жыл бұрын

It's Florida. Stick that same car anywhere in England on the north of Maine and it ain't going to look like that even after 12 months. I moved from just north of Manchester, England to close to Sacramento, CA. I'm constantly amazed at how rust free and clean everything stays and I've been here over two decades. Working on the car in England was a nightmare. A simple brake pads and disks was a feat of engineering and brute force and you'd spend at least ten times more time with a wire brush cleaning up the bolt heads than you would taking the bolts out.

Seems odd that you would try to repair a car with the paper floor mat installed backwards. So un-ray of you

@olderbutnowiser6701

2 жыл бұрын

Haha, I noticed that as well. It almost, it not quite, triggered my ocd. 🍺

@Straight_White_Fatherly_Figure

2 жыл бұрын

Im surprised he didnt pop the hood* and check battery terminals lol

@nowiecoche

2 жыл бұрын

Watch, he’s trying to sit backwards and drive

@Oliver-kv2mm

2 жыл бұрын

I thought the same thing.

I'd only change the rubber boots. Never heard of changing the shafts for a torn boot.

@doleph1

2 жыл бұрын

That was the customer's choice.

@nomebear

2 жыл бұрын

@Bercilak de hautdesert Replacing just the boots and repacking makes sense, especially if the cracks are caught in time. It's a high mileage VW Passat, will the owner recover the price of new CVs?

@jainscough52

2 жыл бұрын

@@doleph1 Customer gets what they want.

@MrKornnugget

2 жыл бұрын

Welcome to America. We alway replace the shafts for a torn boot. I actually never seen someone just replace the boot.

@MegaSunRise3

2 жыл бұрын

@@MrKornnugget Seems a bit wasteful doesnt it?

Working in the junkyard paid by the part (not wrecked) , gave me so many tricks...never pry twords the seal on an axle, and soft direct pressure doesn't work well either, sharp direct blow out in seconds everytime. Tie rod ends and spindles have flats on them for striking with a hammer ,again off in seconds..no damage.. Fun watching struggles doing it the "right"way.

A VW with THAT many miles and yet no warning lights??? That's quite impressive!

@lolatmyage

2 жыл бұрын

Must have been recently repaired lol

@john1genius

2 жыл бұрын

I junked Audi A4 with 260,000miles never used oil between services,50mpg because I damaged the whole drivers side in bad temper because wife wanted me to garage it instead of doing it herself ☺️

@katywalker8322

2 жыл бұрын

CV joint grease gets everywhere - even on the dashboard warning lights!

@wesgregg6451

2 жыл бұрын

​@@john1genius You sure showed her! (LMAO)

@Blaketography

2 жыл бұрын

It's a 2.5l 5cylinder. I've seen some with 300+k

Vw and audi is my regular stable. Top tip, put a nut on the track rod end thread so when it releases it doesn't jump out. Or just give the casting a hammer wack to release the taper of the track rod.

@joepanico6480

2 жыл бұрын

Since you've got the experience ... when changing ball joints on wife's 2007 Rabbit I found multiple torque specs for the 12 point vs 6 point axle bolt. What are they??

@LAW-fv6ys

2 жыл бұрын

@@joepanico6480 200nm for both

@phil6465

2 жыл бұрын

He normally does put the nut back on, but likes to wind some viewers up.😀

@utidjian

2 жыл бұрын

@@phil6465 And he succeeds.

@kdudutse

2 жыл бұрын

@@joepanico6480 6 point bolt usually comes with thick washer and 12 point one - has a collar ( kind of built in washer) - thus a different torque required

I’m so jealous of you guys in Florida when it comes to these jobs. I had to do my CV earlier this year and it took forever mostly just to beat the rust off the car…

@ryan-uu9lj

2 жыл бұрын

No kidding. Lived in Ohio for 26 years, and every time I worked on a car you either had to beat it up or heat it up.

@Alexlfm

2 жыл бұрын

@@ryan-uu9lj Or? I think you meant and. Even then, once the car hits around 7 and starts to turn to 25% rust by volume, I often get to throw in a new one, cut and weld. Always fun when you get to make even more work for yourself just to do work. Endlessly entertaining, hours of wonderful frustration, 7/10. I don’t know what I would do with all my free time if I lived in a state without winter and salt.

@andrewyankovich8772

2 жыл бұрын

@@Alexlfm Im in NEPA I feel your pain. lol

@shawnkelly695

2 жыл бұрын

Must be a ford, dodge or chevy product. My mitsubishi is a 2008. Changed cv axle and no rust. On gravel lot with basic tools under 2 hrs and no rust. Buy imports if dont like rust and junk. 3 yr old dodge car has more rust than a 14 yr old import. Lived southern ontario where they love the over use of salt and no rust. My chev car at only 8 yrs old was scrapped due to rust rotting everything to the point of no shop with even jack it up to change the tires. My chevy is most reliable until it hits 150 000km then its scrap. I hear big 3 reliable as spending 4500 per yr on a 5 yr old car to keep it driving then 3 or 4 yrs later the rust made it un safe to even put on a hoist. At 110 kmh the car shook so bad and left a trail of rust to follow me home. Where did shawn go? Well follow the rust trail and find him. Nope imports. Minor surface rust and reliable. 395 000 km and only burns 1 ltr of oil per year. 3 yrs since changed the oil and she still runs good.

@ronniearnold4772

2 жыл бұрын

Muffler clamp and slide hammer works without beat n trans and pry n at angle

I want this guy to fix my car! All mechanics should be like him... knowledgeable and honest and gives a dam about the customer and their vehicle.

If I had a car that needed repairs I would take it to you gladly. I hate most mechanics but you are honest and talented. Keep up the good work.

I wish there was more mechanics like you that actually care about their work and the customer

@joesmith9483

2 жыл бұрын

i've never met an honest mechanic

@goblinphreak2132

2 жыл бұрын

there are. we are just hard to find because we generally wont work for name brand companies (usually). my customers literally follow me from store to store, company to company, if I decide to leave a company for whatever reason (or let go for stupid reasons.)

@teamallyracing1780

2 жыл бұрын

I have one his chinese ever since i know this guy i stopped doing my own repairs but his super busy flooded with vehicles everyone dumps vehicle on him and take off

@joesmith9483

2 жыл бұрын

@@goblinphreak2132 honestly i would buy a garage to just to help people out.

@shawnbauman5463

2 жыл бұрын

We exist but are the minority.

Scare tactics. The best way to lose customers to better shops!

@sanangelo7926

2 жыл бұрын

They dont care … they are just looking at making a buck at that moment. They are not looking at long term

@oatym850

2 жыл бұрын

That's exactly why competition is good for consumers. Don't believe what the first guy said? Get a second opinion. The second guy might just have a go pro and a great sense of humor!

Refreshing to see a high mileage (for the year) car in your shop, in well looked after condition, with premium tyres.

Ray, I just wanted you to know that your videos made me more comfortable and knowledgeable about working on my own car. Last week I did all the mods and part swaps to take my GTI to Stage 2 and did all my maintenance and fluids myself. Thanks man!

This VW looks in good condition for the milage

Back in the late 80’s my boss sent me off to an Goodyear car alignment training class. I worked at a Goodyear shop that did not pay their techs a commission but all the other students/techs did. Part of the class was discussing how to improve your commission bonus. The whole thing seemed sketchy to me. What was worse was hearing the other techs telling stories on the tricks they used to sell products/services.

@harrywalker5836

2 жыл бұрын

happens in all industries.. even mucdonalds, h/jacks,, would you like to upsize, fries with that.. ect..

@caddyrack

2 жыл бұрын

Been there, done that. Worked for Goodyear for 13 years, went to same seminars. Other "techs" made a shit load of money 'upselling'. I saw many good parts replaced for techs as they made great 'bonuses'. managements did not care as long you produce/sell by hook or crook. This happened in the 80's in Canada. All Goodyear stores were owned by the 'company' after that the stores were sold to ex managers. I was under the gun many times explaining why my numbers were low. Thank God I got a job teaching auto mechanics to a very reputable polytechnic, teaching the 'proper' way to diagnose and repair vehicles. Cheers

@Biffo1262

2 жыл бұрын

@@harrywalker5836 Nope nothing like the same. When you are offered the option of a larger meal you are getting what you paid for (AND better value)nd that is nothing like an unnecessary wheel alignment plus the MacDonalds counter staff gets nothing extra.

@kskoog2019

2 жыл бұрын

@@caddyrack I remember that they could get paid three separate commissions: One for recommending a part/service the customer would purchase. Another for installing the part and lastly a commission for performing the alignment. So the goal was to get all three commissions. One guy claimed to almost make 75% more than me based on the bonuses he made. And at the time, I was one certification away from being an ASE Master Tech.

@es5ape

2 жыл бұрын

long time ago I got caught on such trick, after that I'm repairing cars by myself ;) my cars, cars from my family, neighbors' and friends.

Great honesty which gets Rainman a gold star. Secondly, a piece of cake to do axles on this VW. Well, except for the extraction difficulty. But they have been in there for a few miles and they seemed at home there. A second gold star is issued to VW for not making the process a pain in the rear and requiring a bunch of special factory tools to get it apart. Thanks VW! Honda, were you paying attention?

You should add more vehicle specific and completed work information in your descriptions. I'm sure you would solve a bunch of headaches on specific jobs your doing for the DYI'ers. I love this channel and have picked up a ton of tips and tricks. Thanks for what you do!

@JetFire9

2 жыл бұрын

He only makes the videos to justify talking to himself out loud at work. Otherwise they would know he’s mentally unwell. If you learn anything about cars, that’s an accident.

FREEDOM, Canadian flag. You rock Ray. Thanks for the props.

@A-FrameWedge

2 жыл бұрын

I wouldn’t call it props, not to Canada’s government, but for the Canadian people who are under the tyranny of Trudeau’s rule.

I had a lady come in once for a oil leak check. Got under the car and the drin plug was hand tight. So I fixed that for her but I seen she had a brake light out as well told her we can fix that as well. She stops me and says she was at jiffy lube yesterday, they did the oil and told her about the brake light and the light was a 2.5 hour job and would cost $200. (I was kinda in shock for a good sec.) But told her they lied to her, I had it changed in 5 minutes and it cost her around $20. She was pissed that jiffy lube would try to do that to her. (I can't stand shady shops, it gives us all a bad name)

@ronijr4918

2 жыл бұрын

It's JIFFY LUBE. EVERYONE knows jiffy lube is like McDonald's of the auto industry they pay like crap so the customers recive crappy service.

@karlrovey

2 жыл бұрын

I'm not even a mechanic and I can change my brake lights in less than 10 minutes. That said, mine is pretty easy to access.

@GunBChevyNUT83

2 жыл бұрын

@@karlrovey some people just know nothing about cars at all and others just take advantage of that... today I had a older gentleman ask me to put his spair tire on because he didn't know how to get it down and is waiting for his tax money to get a new tire. So I did it but showed him how so if he ever needed to do it himself. (It was a newer Toyota suv and the tools and down drive are hidden)

Really? Swapping the whole axle? That is unnecessary. I only ever change the cv joints as it takes almost not much more time than changing the whole axle itself but saves you around 50-75% of money. At least in Germany

@987mariano987

2 жыл бұрын

Not even that you can exchange just boots or how it is called fill it with grease and you saved 99% of the cost, if there is no worn for joint itself it is just waste of the money i just looked it up for this passat it cost 10euros for one side...

@tiddybearkush

2 жыл бұрын

Most shops just change the whole thing because it's not much over a more cost today.

@alliao82

2 жыл бұрын

right? oem axles have the best quality... loads of dodgy parts around

@marioobermaier6911

2 жыл бұрын

you can even change the outer boot even without getting the axl out of the transmission, really waste of time and money in this Video...

@TSKseattle

2 жыл бұрын

Labor cost to dismantle the joints off the shaft to replace the boots, and then find out the joint are damage too. Meanwhile, the part shops rebuild half shafts all day and they cost less than the total labor costs.

Thanks for all the insight on how to do these jobs because it lets us know what we will deal with when it comes to us diy'ing our repair jobs! Little tips and tricks are very helpful.

OK, when did folks stop changing just the boot? Surely no need to change the entire shaft if it's just a boot that's torn?

@robinbeckford

2 жыл бұрын

Same thought occurred to me. Anyone know why? Is it economics, convenience, something else?

@AnthonyNeilPace

2 жыл бұрын

@@robinbeckford It's mostly convenience..... I'm having to change my CV Joints on both my shafts on my Mk4 because they no longer sell them new (Complete)

@mickblock

2 жыл бұрын

I'm thinking convenience. if you have to work one step up from removing the axle completely, then the thought occurs, that replacing the boot means cleaning out & replacing lots of grease.

@HootMaRoot

2 жыл бұрын

That's what I thought, a set of boots would be 30 at the very most. No idea what the cv axles cost but I bet its cheaper including labour to just do the boots

@richardhemingway6084

2 жыл бұрын

@@robinbeckford It's to stop it coming back in a few months to change it again for the Cvs failing. You have to disturb so much anyway, just to change the boot. If the boots have lost lube and done a few miles, they are ready to fail. It is wise to change the whole lot. Labour is the main expense, which would almost be the same, for boot change or shaft change. DIYers, would just change the boot as labour is free.

The world could be such a wonderful place to be if only everyone had this guy's attitude! Always get a smile and a laugh here :-) Thank's for brightening my day !

@charleshines1553

2 жыл бұрын

So true. Maybe the mechanic who used those scare tactics needs a little scare himself. Jerks like those are the ones who do unnecessary work and lie to elderly people (and those who don't know much). I realize they need to make money but doing this is a sure way to keep people from wanting to come and see you and you will go out of business eventually. No one will miss you!! Instead I like mechanics who tell it as it is and not exaggerate on things. The only thing worse than unnecessary work being done is if something gets broken while they are at it. You can imagine how that goes over when the customer discovers those shenanigans!!

@michaelpressman7203

Жыл бұрын

We need more people that are honest and take pride no work like they're signing it like a piece of art then maybe the world might be a better place hey have a good evening

It's really nice to see competent honest mechanics doing work on people's cars, so many people go to these rip-off shops and they get these ungodly prices for work that didn't need to be done. I like the way this shop works they do a good job at a fair price and do the work they need to do and move on to the next car.

It's hard enough finding an honest mechanic and I know there out there. I'm no mechanic but wish you were my mechanic you do great work.

Trust takes time to build and can be destroyed in seconds by very few words. Lets guess where this customer will go for work next time, here or another shop, here I think, regardless of price.

@IcecalGamer

2 жыл бұрын

50-50 here or another place, since the initial estimate for the job done was end of that day and the car got held over time.

@richardhowle1220

2 жыл бұрын

They don't care cars break down and need repairs all the time. If they're doing that they have plenty of business.

Great touch with the Canadian flag. You're a good man Charlie Brown

Honesty is always the best route. I do small engine repairs (I don’t have to crawl under vehicles) and it’s the same idea. I’m honest with the customers, they appreciate that and 9 times out of 10 they will authorize repairs that may not necessarily be absolutely critical, but should be done. And you create a customer for life!

Was a mechanic for 7 years . Now I do moving and man I love watching yo video. Brings me back 😢

I’ve been an MOT tester in the uk for over 34 years now and it never ceases to amaze me how much crap other garages come out with to scam people , I look for faults listed that never existed 🥴 and find other things completely missed and the worst culprits, the big national places , Halfords kwikfit and national tyres with their bonus scams … I mean schemes, the more you talk them into having done by means foul or fair the more your getting in your pay at the end of the month .

@88GTi

2 жыл бұрын

I've never had an advisory on an MOT in 37 years of driving. I check everything top to bottom before I go, and have always maintained my vehicles myself. Went to Halfords once during the pandemic, as my usual tester/garage was closed as they all had the virus....I came out from Halfords with a list of critical defects as long as your arm...Every one of them was a SCAM! I respect honest competent testers like you! 😊

@thehouseholder5468

2 жыл бұрын

@@88GTi if it drove in , I’m sure it can drive home again, I’ve tested cars for four generations of families and they still come back after 34 years , my 6 year old lad is named after one of my oldest customers that have followed me through a few garages and many’s employers

@88GTi

2 жыл бұрын

@@thehouseholder5468 You sound just like my tester 😊

@bluezedd

2 жыл бұрын

You sound like a good tester to me and similar to the one that I go to. I do all the jobs myself and have been working on cars a long time and often spend my weekends tinkering with something. My tester understands this, and he understands that you can quickly write off an old car if you record every bush that is past its best (but he would advise if they were dangerous and had play). The frustrating thing is there can be some good testers who are well meaning and aren't out to scam someone, but will raise things that are technically not an MOT fail (e.g. pads nearing the end of their life), but bad experiences from other garages will mean they might not trust someone who is looking out for their best interest. I've also heard of people not being happy with parts mark up but I know too well the hassle of ordering parts and them being the wrong item, having to do returns, identifying the correct part, or having issues with parts (I had a brake disc/pad set that was slightly too thick to fit in a caliper before and the wheel was locked up. The piston and sliding pins were moving freely, and the piston completely bottomed out) A micrometer confirmed the disc was slightly thicker than the replacement from the other side.

@philcotswold5940

2 жыл бұрын

My daughter had an issue with Kwickfit falsely claiming a fault. Took it to an independent nearby they said there was nothing wrong with the car. Can’t remember the details but she would have been substantially out of pocket by £150 to £200.

I liked the Canadian flag reference when you said freedom. Also, I liked you using the word "malarkey". Have a great vacation.

My by far favorite way to remove stubborn CV axles is to wedge two 3/4 inch cold chisels on either side and hammer them in evenly, they usually come out with 1 chisel, but 2 makes sure of it. I had one where the shaft was missing already, a d driving 2 chisels didnt work at first, but hammering the cv joint cup inward popped it out. If I can't reach the chisels, I have a designated socket and extension for long-reach tactical chisel bonking. Great to see your honesty paid off with the repair today.

Thank you Rainman. I drive a 2017 Vw Passat. It's disaligned. The steering wheel spokes are angled to the left of the car when i drive. I wanted to do a visual alignment on both front wheels with using the struts. But i wasn't sure if they were regular bolt and nuts. Holding the front struts. When you raised it on the lift Now i know i need a star headed insert socket. Good job with real clear videos.

Much like the oil cap for you, it bothered me for the paper floor mats to go in backwards. Lol.

@petermurphy3354

2 жыл бұрын

Same😎😎

@terrystrickland9789

2 жыл бұрын

Agreed

@jimmeade2976

2 жыл бұрын

First thing I noticed in the video that the feet on the paper floor mat were backwards

@StrangerInAStrange

2 жыл бұрын

Ray was just being ironic . . . ;0

@blahorgaslisk7763

2 жыл бұрын

It's hardly the first time he's done that. I've been waiting for a long time to see someone post about that. Yea, I know it's not nice to make fun of other peoples OCD, but it still amuses me...

Dude, you put the floor mat paper in upside down. How the hell do you expect that car to run correctly? 🙄

@AttorneyBCollins

2 жыл бұрын

Upside down would be facing the floor and a seriously dangerous condition. That was just backwards.🧐

10:36 I've been trying to tell you... to coax the c clip into position, rotate the axle while applying separating pressure fairly consistently with each bit of rotation. it will center the c clip in it's bore instead of trying to pinch it against the blunted part of the inner retaining edge.

@JustAnotherAlchemist

2 жыл бұрын

Or... use a c/v axle removal tool + slide hammer?

@Chrissuit33

2 жыл бұрын

@@JustAnotherAlchemist I was screaming at my screen. "Just get a slide hammer! It'll pop right out."

@6stringgunner511

2 жыл бұрын

Get a BFH! (Bigger Fn Hammer!!!) Ha haaaaahhh ha ha ha! 😂

@pepega5560

2 жыл бұрын

english plz 😂

@michaelszczys8316

2 жыл бұрын

Spent DAYS on Escort axle ends. I had to build a special tool to clamp on a three sided axle cup so I could put small chains on it and THEN it came out with straight slams.

This makes me appreciate how the cv axles on my Audi bolt on. Actually last time i changed one, i just unbolted it from transaxle then slipped it out of hub without dropping ball joint or tie rod.

@aidencraigallman1656

2 жыл бұрын

Much better design for the Audi, had the same setup on my C5 S6

@Grantidge69

Жыл бұрын

It's the same on all the B5* and C5 Audi/VW platform cars, and the A4B6: bolts and a flange on the gearbox side of the shaft. These later Passats and the CC are a Golf-Jetta hybrid PQ46 platform. Only reason I can see for them using a spline at both ends is because it was cheaper, somehow.

WHOA Ray take it easy. I'm 72 and haven't been in a fight like this in years. First you knock me down and hit my head on the floor and then an elbow to the chin and I almost go down again ! Hopefully I'll recover by the time your back from vacation. :)

@michaeldaigle7207

2 жыл бұрын

I love your sense of humor. It always makes me happy to see my elders enjoying the internet as well. Hope you're having a wonderful day!

Ray, I love your work ethics, I wish there were more people out there that put truth and honesty before profit and targets. Well done Sir 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏

@soopaman2

2 жыл бұрын

That is why Ray has so many viewers, honest men are hard to come by,

@sobbo12

2 жыл бұрын

Not that i support any kind of ripoff but. There's always 2 sides of the story. "Oil change turned into an expensive job, must be trying to rip me off." And that's why they ended up at Ray. The shop could just have said that they should be replaced. Worked way to much for private person's to learn that there's a lot of weird people. As you also can see on some other of rays clips too. Best part of living in a small town is that i often know the person that was there before me.

@SpearM3064

2 жыл бұрын

I'm going to play devil's advocate here. Now, just like everyone else, my first reaction is that the other shop was trying to rip the owners off, but... what if they weren't? What if the scare tactics were because that shop has seen far too many people refuse service despite a dangerous condition? There are other channels here on KZread where you can see what happens when people ignore warnings. Bald tires, subframes that are more rust than metal, brakes worn down to the fins that "just started making this noise", broken strut mounts, transmission leaks "fixed" with FlexSeal tape... it's amazing how some people will ignore serious problems thinking that they'll save money.

@chrislotzkat1066

2 жыл бұрын

Honesty before profit? He still sold Both axles instead of just the boot

@iangrice329

2 жыл бұрын

@@chrislotzkat1066 there is a difference between saying the boots are split, the shafts have done over 200,000 miles and would benefit from being changed to saying they are dangerous and you will die.

I recently took my car for a minor service and some replacement parts to a major dealership. They ‘discovered’ a fault that manifest as a serious misfire on two cylinders and, after two hours of diagnostics (swapping the coil packs), the recommendation was a replacement engine. Alternately, I could take the car and sign a waiver that I understood it to be unroadworthy. Independent examination. One of the parts repaired was on the air intake. The ECU had compensated for extra air being drawn in and enriched the mix to the cylinders. Fixing the ‘gap’ restricted the air being drawn in and … it was running too rich. Ten minutes running the engine to temp cured this problem. Cost? Ten minutes of running the engine. Potential cost from dealer? $5,800 plus labor. Current value of car? About $6,500. Find a reliable independent mechanic and let the dealers go.

TY man! That made my day. Times are tough here in Canada! 🇨🇦

just change the two torn boots, pack them with the special grease and that's it. It's a lot cheaper than changing the whole shafts.

@n9wox

2 жыл бұрын

And keep original OE CV axle and not use cheap regrinded axles. When I replaced my 2000 Passat CV axles, I used Raxles which rebuilds using OE parts.

@olivier8264

2 жыл бұрын

obviously not in Yankee Land where time is money, business is business and love is bullsh*t

@brnmcc01

2 жыл бұрын

With over 217,000 miles on them?? I think not! Plus looked like the torn boots were not caught in time, lots of dirt on the flung grease.

@leeiverson145

Жыл бұрын

@@brnmcc01 rubbish! No knocking hardly any grease come out, Re pack with grease new boots no problem, Rather fit that than a pair of crappy aftermarket driveshafts!

Loved the flash of the Canadian Flag when you said Achieved Freedom :)

@waynesitarz424

2 жыл бұрын

We have freedom in Canada. Is some red cap crowd telling you we don't.

Watch this again, but with CC on. I believe the CC is captured by an automated system. It does a great job, in particular when it identifies the tool sounds as "music"

I love it when one shop tells them a horror story then they go to yoy for the repair because you're nice and honest. ❤

Keep up the great work Ray. Love your work ethic and skill combined while having fun with it all.

I wish I could find a shop near me that is like the one where Rainman Ray works at. We had one that was mom and pop shop, and they retired and there went that. I love the honesty and the fight to show there are GOOD mechanics out there! Thank you Ray!!

@geraldogden9618

2 жыл бұрын

Before I bought my new ride, had one here locally I trust. Saved Christmas for me one year.

When did you start doing the "doo doo doo" when the phone rings lmao. Its perfect

I like your videos. I always laugh when I see you going through the same problems I have encountered in the past. When removing the axles without the special tools, always us pry bars at 9 & 3 or 12 & 6.

been watching a few of your videos and I really enjoy your content. I just subscribed because of your comment about putting yourself in front of others. you've got the right mentality

I think part of the enjoyment I get for watching your videos is seeing how you overcome the constant problems you run into as you do the repairs and solving them. While you were working on the first axle removal and it not budging out of the transmission case I kept thinking there was a hidden circlip that needed removal first, but that wasn't the case. You eventually freed it by bottoming it out and then crow barred it again. Nice work. Nice video. Thanks.

This is the 2nd video of yours that I watched and I love it! Its great how you explain everything and keep calm when shit is flying back and forth. Could this job be accomplished without a pry bar in your opinion in the open field ? I'd love to DIY it on my 2006 Golf V

I've been a mechanic for 25 years, and that's the first time EVER that I see axles on a volx that are just pressed in the tranny. Every single one I've seen has been bolted on to a flange on the tranny (exactly like the new ones you got). I was astonished when I saw it...learn something every day! Turns there ARE some volx cars that have normal axle shafts!

@fernarias

2 жыл бұрын

It's a mexican vw jetta made with mostly chinese parts.

@davidrorabaugh6879

2 жыл бұрын

It's a Passat which has a 2.5l inline 5. Might be Mexican but it's not a jetta. Vw has a long history of doing odd things with the passat vs the Golf/Jetta/Bug platform. If this Passat has AWD it definitely adds shenanigans.

@eurodriven2507

2 жыл бұрын

As someone who had to replace a CV on a similar car (2.5l Rabbit with an auto trans), I'll take the bolts over the "pressed" ones. I had to make a 12lb hammer slide to get the damn thing out. I'm in Minnesota and the car had 200k+ miles. Obviously the weather and salt makes everything automotive worse, but the bolts are easier. Just remember to torque to spec and you're good. Especially since they (should) last about 200k miles.

Finally a job I have also done! Passat has gotta be German for "pain to work on".

@craiglyles4755

2 жыл бұрын

It’s German for made in Mexico junk.

@vw5056

2 жыл бұрын

@@craiglyles4755 Right, junk. Tens years old, 220k miles and looks/drives like a new car.

@craiglyles4755

2 жыл бұрын

@@vw5056 Ha ha you obviously don’t work on them professionally, they’re the German junk car line, ask any VAG / Porsche technician.

@vw5056

2 жыл бұрын

@@craiglyles4755 I actually did ask my mechanic once and he said they are excellent. Just stick to GM turds you hack.

@craiglyles4755

2 жыл бұрын

@@vw5056 I get you’re biased and a VW fan boy but the only hack is your mechanic if he’s telling you they’re good cars. Hitler would be rolling in his grave if he could see what an abortion the product line has become. VW Audi techs with any decent amount of professional experience will 100% confirm they’re junk. I work on Asian, Euro, domestic, and VW euro trash has lined my pockets very well for 23 years.

The chip in the windshield, (just above the steering wheel clearly visible from :34 thru 1:29), has got to be more dangerous that what they diagnosed this vehicle with. Great job Ray, and as always thanks for the video and the information to unsuspecting folks out there. "Click!"

@ellieprice363

2 жыл бұрын

What’s so dangerous about a chipped windshield, or was that a bit of satire?

@russellayton6408

2 жыл бұрын

@@ellieprice363 definitely satire!

I love your content. I am a 56 year old software engineer now but back in my teens, i rerebuilt a a 1971 Pontiac motor in my parents garage. I even served as a human transportation Jack. That was a fun day.

It's always nice to see honest mechanics at work 👍💪💪💪never change 💪💪 cheers to all 👋👋

I wanna know how they pushed a VW past 80k without catastrophic electromagnetic disruption in the computer complex.

@tossmonkey1

2 жыл бұрын

Exactly! Or a cataclysmic eruption in the cylinder zone

@rex_s80

2 жыл бұрын

Surprisingly my sister’s VW hasn’t had any electrical issues. The engine on the other hand… leaks so badly. Timing cover and transmission leaks etc. water pump and coolant hoses and only 100k miles.

@jondiaz3475

2 жыл бұрын

That car is mint! Even the wheels were curb-free. The amount of oil on the bottom would bother me tho.

@cedhome7945

2 жыл бұрын

I was supprised at the mileage it shouldn't be still running ?

@jondiaz3475

2 жыл бұрын

2012's with the 1.8 turbo had a problematic cam chain tensioner, but this car may have already had it addressed. There are a ton of these running around the St Louis area with 200+k on them, looking at FB marketplace.

I love the Canadian flag popping up when you say "It has achieved freedom". Thanks for another great video.

@redbull8536

2 жыл бұрын

Canada and freedom dont belong in the same sentence. Canada doesnt even have free speech rofl

@Bynming

2 жыл бұрын

@@redbull8536 it does, as evidenced by the fact that no speech is censored here, really. It's called freedom of expression and it lead to fewer violent crackdown on protests like you see in the US. If you think Americans are free, I'm sorry for you.

@redbull8536

2 жыл бұрын

I call bs on that. U can go to jail for words lmao. And your leader is even more of a dictator then ours. But yours hides in a bunker cause someone honked there horn. And whats been happening here aren't protests. There riots and domestic terrorism. My family is originally from canada. French canadian, theres a reason my grandparents moved away, ive heard all the stories of good ole canada

@twatmunro

2 жыл бұрын

@@Bynming -- Are you really talking about the country where a man was sent to jail for calling his daughter his daughter?

@Straight_White_Fatherly_Figure

2 жыл бұрын

@@Bynming the 75 year old man who got beat up and arrested for honking his horn would beg to differ.

It’s great your honesty and integrity rewards you with more work... I don’t mean that in bad way, more work means a future.

One of those quick oil change places told me that my pvc valve was blown and had to be changed. I asked what a pvc valve was and he pointed to the pcv valve. He showed that when they rattled that they were shot. I informed him that is was a positive crankcase ventilation valve and that rattle was a check valve. Hate those places

I once went a shop for an alignment after replacing the tie rods. They told me that I needed $1800 worth of work before they could do it and the tie rods were on that quote. They told me if couldn't afford that, I should park it until I do because if was unsafe. I thought how stupid can be to add the parts that were clearly brand new and I told the service writer that. He said I only go by what my mechanic said. I went down the street and they said I didn't need anything which I knew because I checked out everything when I made the repairs.

@captinbeyond

2 жыл бұрын

A lot of those chain shops are geared to run up the work to be done like that. I took my almost new Tundra in to a chain shop ( Brake Check-- I think they are out of business today) just to get my brakes flushed with new fluids. Anyway they called me and told the they found $1200 in repairs ( on a truck barely used 38k miles). I went to another shop and they found nothing wrong. Later I was recalling my story to a co-worker and two other guys started laughing cause they had the same story used on them at the same shop using the same" you may not make it home" it as so dangerous. They would use a co-worker to come over from another bay to confirm the dangerous repairs...like playing out a script. They soon went out of business and now it's Pep Boys there.

@michaelszczys8316

2 жыл бұрын

That is how I learned how line up my own stuff good enough for my tires to wear good. Nobody would align it unless the whole front suspension was all brand new parts. Preferably put in by them.

@Rainman Ray's Repairs - If there is no wear in the joints, why didn't you just replace the boots. I had done just the boots on my old Renault 12 and the joints lasted another 150k miles.

@cool386vintagetechnology6

2 жыл бұрын

Ah yes, the joys of a Renault 12 CV joint boots :) Don't know if I was doing it wrong, or it was because they were aftermarket boots, but a real pain to install - stretching the small end over the end of the shaft. But you're right, the joints lasted forever, even with the boots split for years.

@erik_dk842

2 жыл бұрын

I bet these original axles with replaced boots would have lasted longer than the Chinese crap Rays garage is going to replace them with.

@caddyrack

2 жыл бұрын

@@erik_dk842 your comment comes on and on many times, are you on speed dial on Ray? He install what the company buys, NOT his fault if the parts are from China or Mexico.

When I see you not wearing gloves I find myself tempted to "tut tut tut" you and wag my finger at you. This says way more about me than it does about your excellent, entertaining and informative vidéos! 😂 😂 😂

I've never heard of clicking CV axles which only make noise when turning being called a safety risk when driving in a straight line down the highway. But then again, it has been a couple of decades since I let anyone work on my cars. And THIS is the main reason why.

Knowing how to secure your financial well-being is one of the most important things you’ll ever need now. You don’t have to be a genius to do it. You just need to know a few basics, form a plan, and be ready to stick to it. No matter how much or little money you have, the important thing is to educate yourself about your opportunities

@everetteryker7094

2 жыл бұрын

When it come to the world of Investing, most people don't know where to start. Fortunately great investors of the past and present can provide us with guidance

@witzemacher783

2 жыл бұрын

Investing in Bitcoin is good idea, a good trading system will put you through many days of success.

@semper.fidelis

2 жыл бұрын

Am trading with Expert Chris Pulver, a regulated broker in US. Met him some time earlier last year at a startup funding event. He has some interesting things to say about the state of algorithmic trading today. Very obviously I'm seeing the results.

@gerhardhoffmann

2 жыл бұрын

Amazing!!!...I also started trading with Chris Pulver, He's the best at what he does with an initial investment of $2500 Canadian I made up to $8450 profit in just a week of trading with him, his strategies are mind blowing

@gerardlamour6418

2 жыл бұрын

Doing a little research he's actually licensed with a card number great recommendations I'll definitely get in touch with him I was able to see that he is a registered trader, cause to be sincere I don't believe anything I see online but am definitely shocked that he is real.

over the last 40 odd years, it's been my experience that every component of the automotive industry (But not everyone "in" the industry) utilizes "Fear Mongering" as a sales tool.

@patrickwhitehead7584

2 жыл бұрын

I've found work in a better place for me, but I was a tech and then a service writer in a commercial truck shop. The wording was more about DOT regulations and potential lost revenue and the dreaded DOWN TIME. A tech is a tech but the service writer bothered me. roughly 70% of what was coming out of my mouth was total bullshit. I moved on to greener pastures.

@christopheryoung826

2 жыл бұрын

Sadly alot of customers also don't understand what is being asked/said. Ive learned not to trust anything a customer says. Examples from today. Two shop warranties. Customer 1 transmission service light came on after brake valve replacement. Customer 2 no grease caused trailer brakes to lock up. Its hard explaining something to someone whose got no idea whats going on.

I'm a mobile tech and I have crafted a special tool for a stubborn CV axles. I have a decent sized slide hammer with a pair of vice grips attached to the end. Just poke a hole in the inner CV boot with your knife and put the pliers through the hole on one jaw and bite the cup from the inside. One good slam wham bam out with the axle. Kadink.

"Not getting killed at work is one of my main goals" Keep doing that and you just might make it through!

Might have had less trouble just popping a boot on each side rather than replacing the hole shafts 🤷🛠👍✌️

@mingkong8350

2 жыл бұрын

Agree totally

@cyrenecai

2 жыл бұрын

That's my thought, if the boot is the only part that's gone bad, it seems like it would be simpler and cheaper to just replace that after re-greasing the joint.

@AlexR_44

2 жыл бұрын

Especially since aftermarket axles (most off the shelf brands anyway, that one included) are inferior axles to the OEM ones. I have a MK IV GTI that I have put the OEM axles back on with 130k+ miles on them, just fresh grease and new boots and the car is undoubtedly smoother than when I had "new" Autozone or Advanced auto quality ones on it with under 20k miles wear. I think he over 200k miles though, so... I dunno. I wish they still sold CV joint rebuild kits, but I guess nobody takes the time anymore.

when i replaced my cv axle, i didnt have a big pry bar, so i just yanked really hard. most because i was mad at fighting with it. literally on the 3rd yank it just popped out. that made my day. and then the new one was out of the socket and my car wouldnt go back together so that ruined my weekend

@chadg6874

2 жыл бұрын

My buddy and I spent one entire weekend working on CV axle. We ended up using a pickle fork but had to keep grinding it wider and wider until it fit. Something that shouldnt take more than an hour took 20 25 hours lol. Once it finally came off I was so tired I couldn't even remember how the hell I did it

LOL great video, had the same problem with my Santa Fe CV's, after a lot of swearing I finally got them out but getting them back in was a nightmare. Much respect.

that there are good people who want to make an HONEST living is always hope for a better future for our world. My hat is off to you, we need more people like you : )

The parts person forgot to check which transmission the VW was equipped with.

@lukeyarasheski5510

2 жыл бұрын

VW have done that for years. You have 3 options for axle length all within like 20 mm of one another. I saw a guy do one once on an older one and it popped out on the diff side when he went to go move it

@zcvyvyan

2 жыл бұрын

Or they asked about the transmission and the chassis code and got a very annoyed sounding "I don't know that." It happens a lot and that's when parts guys just pick a part and send it.

I had the same issue with a Ford Escort axle. I thought I would crack the case before it would come out. I found that rotating it 90 degrees and repeating helped.

@bubbaberto123

2 жыл бұрын

Are they always that hard to come out I helped on one and don't remember it being so bad dang that's so work

@garyr7027

2 жыл бұрын

Best to pry on two opposite sides if possible, so they will pull out straight, otherwise the C clip and splines bind up. Only problem on some vehicles is getting to both sides at the same time.

@MrHotdogwithmustard

2 жыл бұрын

Not sure if it's a good idea but when I did my rear CV axle on my charger, praying wasn't working so I ended up just grabbing the end of the axle and using it like a slide hammer lol

@justinsnyder6256

2 жыл бұрын

I did one on a tiguan and weled a plate to the metal housing after taking the axle apart. Use a slide hammer to come out square. Things are a pita

Next time you get a drive shaft that won't come out try and burrow a very thin screwdriver between the transmission case and the pry bar. Putting the fulcrum for the pry bar nearer the load will vastly increase the leverage. I would keep fox wedges as an option but i got fed up of folk never returning them (cos proper ones cost a lot)

That "It does not consent." Almost sent milk spewing from my mouth. Lol

In a week you covered two of my vehicles. The Silverado suspension and steering looks straightforward for my shade tree capability. My B6 Passat's CV axles, however, will benefit from the leverage afforded by my neighborhood shop's lift. Thanks, Ray!

@jacobz.carson803

2 жыл бұрын

If it's anything like the beetles axle, you are correct. Not enough leverage on the ground. (You can't get a big enough probably in there) Know this personally because I was working on a friend of a friend's car..at a garage with a lift, but outside on the ground. Had to put it back together, pull it on the lift. It took 45 minutes to do on the lift.

@daledickey8400

2 жыл бұрын

Inner CV puller with slide hammer works great when you don't have a lift.

Every single video is great man. Please keep up the great work!

Just started the video and "Holy hell, that are really loud tires" ... And a little tip for the steering connection: Just take 2 hammes, one behind and slap on the front of the axle part it gets in, it will jump out with 1 or 2 strikes. And that you didn't just replaced the boot is a bit sad, 5 minutes for the boot is faster than the pulling and then having the wrong parts. We never pull them out, we change the boots and that's it. Time is pretty much the same, we make money with time not parts, and after 30 minutes, the car leaves the lift :(

Ray, you don’t need to use that tie rod tool. Leave the ball joint connected, loosen the tie rod nut nearly all the way and hit the end of the that arm hard with a steel hammer - 3-5 pounder. It will pop right out! No boot damage, no muss, no fuss! Great video.

I just wanted to say that it's refreshing to find someone turning wrenches that's completely honest keep up the good work stay safe and I'll see you at your next video

@TonyRule

2 жыл бұрын

As usual, the 95% ruin it for the rest... 🤣

@ciderheart

2 жыл бұрын

It’s normally the service advisers that are the dishonest ones in my experience

I used to do my own mechanical work and I was caught in a time when I had no time to replace my brake pads myself. I took it to one of the big name shops (whose known for tires and sounds like liarshome) they tried to scare me saying the surface rust on the tire mounting face of my rotor was so bad that it was unsafe to even let me drive out of the shop. A few choice words and short time later I went home and did the job myself and wouldn't you know it, no issues after a little brake clean and some quick abrasive wiping.

@samsavedbygrace996

2 жыл бұрын

Wow. This is getting bad

@drewv1785

2 жыл бұрын

Yeah, I cut up my card for that place years ago!😉

@johnme7049

2 жыл бұрын

Yeah, I could tell SOOOoo many stories. NEVER GO THERE!

@TonyRule

2 жыл бұрын

Tyre shops are the worst for running those sorts of scams here in NZ too.

Have a nice and safe trip Ray see you soon.