Early Release, because you all are awesome! 3 part series kzread.info/dash/bejne/gpeXp8aQd63ShbQ.html

@country9020

2 жыл бұрын

Your struggle with the crush washer triggers my ptsd from KIA/Hyundai (s)

@yeahitskimmel

2 жыл бұрын

Your shop is awesome cuz y'all get to be jamming to some CAKE

@7spower998

2 жыл бұрын

4:21 Ray, that's a captured washer. It's a bolt with an integrated washer. 4:32 Would it not have been easier to place the bolt head on a bench vice to remove the washer? Would it?

@RainmanRaysRepairs

2 жыл бұрын

@@7spower998 didn’t have one, waiter and they didn’t want to wait any longer

@7spower998

2 жыл бұрын

@@RainmanRaysRepairs Gotcha. Really enjoy your video.

I love this guy. His whole attitude is so upbeat and he clearly enjoys his job. What employer wouldn't want an Ace like this in his shop.

@jesseaviman

2 жыл бұрын

I own a shop and I can’t tell you how bad I’d love to have guys be this happy at work and to like what they do. Good help is hard to find even when they even get paid well!

@beardsntools

2 жыл бұрын

He clickbaits "Lost my job" in the thumbnail. do not appreciate that at all.

@rickj1983

2 жыл бұрын

@@beardsntools Technically he didn’t lie. It was simply part of his story. Not a big deal.

@Lanie1203

2 жыл бұрын

@@beardsntools don't be a whiner.

@bartenz4307

2 жыл бұрын

I want to see him on a bad day

I'm 80 yrs old and I'm very happy to see a young man that cared about the customers. I wish you were around here. I'm proud of you and I'm sure your parents are also. I'll say (thank you) for all of the customers that didn't I wish you well and a happy life.

@paulynotshore7006

Жыл бұрын

You are right Jim!

@madyottoyotto3055

Жыл бұрын

Here here well said

@buckeye9252

Жыл бұрын

Dont know you but i hope your doing well Mr Jim. 🌠

@beardsntools

Жыл бұрын

You know there's plenty of other mechanics who care about their costumers, it's just that they don't film for clout and can therefore work much faster and not get fired from their job, lol

Always nice to see other techs that don't over sell things that don't need to be replaced

I’m always amazed at how much you accomplish with one hand, all the while maintaining camera angle.

@wall7103

Жыл бұрын

Just getting to the air filter was an impressive feat lol

@bumblebob5979

Жыл бұрын

..meanwhile maintaning not filming vertical. hero!

@dBFreqs

Жыл бұрын

Does he even have a right arm, that is amazing. I cuss like a sailor and blast ACDC while working on cars... definitely would be fired on my first day.

@dBFreqs

Жыл бұрын

Its like golfing, you have you get the lingo down first. Hahaha.

@Wakeupandsniffthecoffee

Жыл бұрын

I've watched a KZread video from a one armed mechanic. It's amazing that he can do things that most of us would struggle with using both hands.

Gonna be honest, a shop that leaves the ‘still in high school 18 year old’ alone in the shop on his first job, that’s on the shop. They’re gonna mess up no matter who they are.

@jakewarner1993

2 жыл бұрын

Literally, it's not even about competence in that regard, it's about experience. Obviously someone that young that's most likely new to all of this is probably gonna make a few mistakes if left to do the work alone. 100% on that shop.

@ilovethe80s74

2 жыл бұрын

I completely agree. The shop f'ked up. You get the employees you train.

@HarrieWorst

2 жыл бұрын

I have once had a job as a youngster in a home improvement store where I was left on my own without any training on the job. A job where I had to use a large vertical saw to cut wood for costumers, without ever showing me how to use it and handle it safely and correct. Since I wasn't fed up with my hands, I walked away from the job the next day. Proper training and on the job and personal coaching by a senior is essential for ever job and newbie landing that job.

@ritchie9601

2 жыл бұрын

@@HarrieWorst hell, sometimes proper training by a tech school teacher won’t be adequate. Once had a teacher tell me to adjust the on-car brake lathe arms by hand rather than the adjusters. I basically told him to fuck off, I wasn’t gonna lose my fingers to his bullshit.

@ralphfolk18

2 жыл бұрын

I whole heartedly agree. I WAS 18 once-in-a-lifetime

Being a retired master mechanic, I have learned a thing or two from you.. You are a wonderful tech and I hope you continue with this channel

@acemany1126

2 жыл бұрын

Obviously...U R not a master mechanic lol

@505Wldr

2 жыл бұрын

@@acemany1126 A master in the past, is a student in the present.

@rickyrobbie

2 жыл бұрын

@@acemany1126 Right?! This guy is a sub par tech at best.

@robertspencer3553

2 жыл бұрын

Pay attention and you can learn what not to do

@Chris-zm7wh

2 жыл бұрын

Everyone beat me to the comments here lol watch this channel a lot of come backs master lube tech maybe

My second job at 18 I was convinced I could run the backhoe.... Remembering the large tail of the backhoe was an issue for me that resulted in my hitting the company office roof with it turning the backhoe.... my career as a backhoe operator at that company was short-lived.

@ethanclark9001

2 жыл бұрын

i ran an excavator into the garage door at my job thinking i could fit through without having to get out and open the door all the way. knocked the whole garage door off. everyone laughed including my boss. spent the entire next day replacing the door and didn’t get in any trouble for it. was told that’s how we learn and get better. thankful i had a cool boss. i know too many people who get fired for far less

@gentlemanzackp6591

2 жыл бұрын

@@ethanclark9001 yep reminds me of this very tall reach forklift, we had several dock doors, many of them are regular tractor trailer height. he was supposed to enter thru "crane access" doors which rose all way up 50+' up he drove through one of shorter one, smacked top two forklift posts against the wall above the door and spring assembly for door just went *pffft* crunch inwards into wall. he stopped and ran away because, he knew the spring tension on those door is super dangerous. he got his manager and they both stared at the door. the senior manager laughed his ass off " someone else would do this.. AGAIN" the guy asked him " what happened to that guy? " " that guy IS ME" he did exact same thing in 1989 hes still there. so yeah we had to repair the wall, dock door, spring assembly, door guides, this time we painted top of walls in BRIGHT yellow with hazard stripe across it , with height marking, the GM of the warehouse wasn't too happy though but no one got fired. just a overhaul on doors and painting from that point on.

@Janzer_

2 жыл бұрын

🤣😂

WOW, an honest car mechanic. He should be displayed in a museum so other mechanics can learn from him.

@deant714

Жыл бұрын

Sometimes it’s not even the techs that are doing crazy upsell. It can be service advisors as well

I respect a man that admits his mistakes; I've made many many in my life. The key is learning from them--like you did. Keep up the great work/videos!

@watershed44

2 жыл бұрын

@Steve Ross *BINGO, honest mistakes which are learning moments and being admitted to show an honorable person.* Especially considering he was just 18 years old, too bad he quit that job!

@andrebeaudoin1060

2 жыл бұрын

He broke the timing belt on purpose you must watch more of his videos he always does this stuff to customers. Its custoner appreciation year.

@richardcline1337

2 жыл бұрын

It takes a big man to admit his mistakes. Otherwise he becomes a politician and you know where that can lead......

@bettyro1959

2 жыл бұрын

@@richardcline1337 EXACTLY!!!

A tip for stuck crush washers I learned at my dealership, grab the washer with some pliers and ratchet the bolt off in the loosening direction. It threads off the washer like it would out of the pan.

@jerryjeromehawkins1712

2 жыл бұрын

👍🏼 You beat me to it Harley. 🍻

@ihatelols

2 жыл бұрын

Yup, did the same thing on my atv.

@scummy73dude64

2 жыл бұрын

Gunna use that one 👍

@michaelfleming9382

2 жыл бұрын

My tip for stuck crush washers at least for aluminum ones is the wire wheel on the bench grinder

@richardcline1337

2 жыл бұрын

I'm a bit surprised he didn't think to do that. Saves a ton of time, frustration and mainly stabbed fingers.

If we don't screw up we never learn. Its learning to not screw up again that is the art.

A lil trick for the full oil filter that my dad taught me. After removing the drain plug, take a small phillips screw driver and hammer and tap a hole in the very bottom of the filter canister and let the oil drain out of that while the drain plug is draining. Empties most of the oil out of the filter so not much to run down your arm or make a mess on those plastic shields.

@DK-bk1vq

2 жыл бұрын

I've been changing my own oil for years and that never occurred to me. So, needless to say, I'm just going to steal that lil trick and send thanks to you and your father, lol.

@Harry-zz2oh

2 жыл бұрын

I would love to do that with the oil filter on my Cummins 6.7. It sits up about 24 inches above the tie rod so it's a real pain to remove. I use two long extensions to hold the filter socket so I can pull the filter down to where I can get it out.

@wolfsmane

2 жыл бұрын

@@Harry-zz2oh Can you install a filter relocation kit on it?

@RoastedHVAC

2 жыл бұрын

Why have I never thought of that? I thank you and your dad!

@malarkey2217

2 жыл бұрын

Yeah, a good idea but i would loosen the filter beforehand, just so it's turning.

I've been a network engineer for 25 years, I've always had my car serviced by others. These video's are awesome. I have so much more respect for your profession now. Easily as complicated and requiring problem solving as any IT job. Good Job, I wish you could service my car down here in the AU, and I wish I could find IT people with your skills. Pay grade difference is not fair.

@StephenFasciani

2 жыл бұрын

wow, as a burgeoning network engineer myself, do you have any advice?

@AlpayYildiray

2 жыл бұрын

You think the paygrade difference isn't fair? Where I live (Germany) mechanics earn between 60-120€/hour, which is more than what you make with an IT job, even considering the down time when there's no customers.

@allantaylor5871

2 жыл бұрын

@@StephenFasciani Absolutely, Learn from others in REAL life, not from uni. You'll encounter problems require YOU to use skills not trained. Basics first. Problem solve second, education third.

@allantaylor5871

2 жыл бұрын

@@AlpayYildiray Man, that sucks. I wish I there were more Germans here then. Basic problem solving is not something taught at school here it seems.

@nunya2814

2 жыл бұрын

@@AlpayYildiray 9/10 the tech aint making that rate, thats what the shop is charging for their labor rate, thats generally not what the techs are paid. Most dealer techs ive known have been in the 30-50 range as their actual payrate.

A piece of advice I learned in my 35 years of doing ac work is always put oil on any o-rings on the the lines, sensors, Schrader valves, etc. I almost never had a leak from the o-rings. Always put oil on the o-rings before you put it back together it will save you time in the long run and it only costs you a few seconds.

@mattcat231

2 жыл бұрын

i have always used a drop of air tool oil in every shrader valve i put in tires

@allanbarr5186

2 жыл бұрын

@@mattcat231 ac oil on the ac system will save you a lot of problems

@watchingitallhere

2 жыл бұрын

Good tip.

@mattcat231

2 жыл бұрын

@@allanbarr5186 yeah, i don't get into AC work, i send that to my brother

@FlyEaglesFly19111

2 жыл бұрын

Indeed.. oil on o rings help prevent pinch. Oil on all helps also have gaskets, o rings, and schraders swell and is better when pulling vacuums. Micron guages.

Have to admit I'm HIGHLY impressed with the serviceability of the Optima/Sonata late models. Why pull whole service covers when you can have a hand sized hole? The AC components are all within reach. The air filter box isn't buried into the fenderwell. Things are where you'd EXPECT them to be?!! Did they hire a mechanic to be an engineer QA consultant over there? Good on them!

@AmazingFlyingSquid

2 жыл бұрын

A lot of Hyundais are pretty good with that. There are some exceptions but typically those are more reserved for higher end vehicles like the entire Genesis line Equus/Azera's. Newer cars generally still have some of a splash shield but you only need to take off a couple bolts and a few plastic tabs.

@2010ngojo

2 жыл бұрын

@@AmazingFlyingSquid More chance for someone to lose the bolts. Or have tabs broken. I much prefer this design. Heck, even have a service hatch or cover of sorts would be good. I know some cars have covers to access fog light at the wheel well.

@logicalaz

2 жыл бұрын

I felt that until it was Sorento/ Optima(k5)/ telluride, day on the final gen of the optimal, and any Sorento after '15 it seems. The undercovers are brutal especially if you're unprepared, or your impact died. 15 10mm screws in the Sorento and about 8 give or take 10mm in the optima's

@fisc2307

2 жыл бұрын

@@AmazingFlyingSquid the Azera is no problem. The drain bolt is exposed via an opening in the skid plates and the filter is mounted topside. Can be changed in the driveway. The Genesis however baffles the hell out of me. There IS an access hole for the drain bolt, buuut not the underside mounted filter. And because the skid plate is so encompassing there is no frame access for a standard jack so it requires a lift or recessed bay. The Genesis plate also requires the removal of 17 bolts to remove the plate. Ive owned both 2016 Azera and 2013 Genesis. Ive actually considered cutting a fold away panel so I can access the filter on the Genesis.

@markiefufu

2 жыл бұрын

@@2010ngojo my 2001 Firebird has plastic covers where you access the fog lights. Prior owner cut flaps in the plastic for fast access. I am just fine with that.

G'day Ray everyone makes mistakes especially when we are young and learning but it takes a real person to admit it and move on, it also shows good character. Well done regards John

"Brute force and sheer technician rage" This is the content I signed up for.

@mbiehl2

2 жыл бұрын

Sometimes you have to put a whole lot of rage into getting a crush washer off the bolt.

@TrixMC

2 жыл бұрын

@@mbiehl2 o

@stanleybaker6989

2 жыл бұрын

🤣

@belowzeros

2 жыл бұрын

that job clearly required the air hammer

@TrixMC

2 жыл бұрын

@@belowzeros ban hammer better

Oh man I once skipped few steps and almost ruined a robotic arm on assembly line worth about 50k. Luckily for me nothing broke, nothing bent, nothing stretched and all I had to do was recalibrate it. Nobody knows, only me and all of you but boy sweat was pouring down my back until I was done with what had to be done and it turned out OK :D

@Raeilgunne

2 жыл бұрын

I put the end of one through a fence. partly. 'yeah, that dent's always been there'. taught it home, hammered the fence flatish, and never complained about keeping the robot at 5% speed when teaching again.

@ryanm595

2 жыл бұрын

I bent a fin on the turbocharger of a series 60 detroit, little $2200 mistake😪

@geoffbell166

2 жыл бұрын

@@ryanm595 They are great motor the 60 better than newer DD-15,but yeah they dont like that!

@briceb4826

2 жыл бұрын

There's 2 types of people in the world of robotics. Those who've crashed a robot, and those who haven't YET.

@andrewking2590

2 жыл бұрын

@@briceb4826 That applies to motorcycles as well...those who have crashed and those who haven't crashed YET.

I was surprised how much you knew about air air conditioning. I do air conditioning for a living.but just a tip before you do anything with evaluating a charge make sure there are no air flow issues. Eg: cabin filter, blocked condensed, dirty evaporator coil etc. you can solve a lot of problems mostly I checking superheat a lot of people don't do that A superheat reading will tell you so much about the system. Also if you're in the shop block off the condenser make the high side go up and see if the txv adjusts accordingly. Keep up the good job. You have a good channel.

@desertbob6835

4 ай бұрын

Most auto AC guys know nothing about superheat. Knowing superheat, and watching it as load on the evaporator changes, will usually diagnose a sticking TXV or broken power elrment line in a minute. I too worked commercial/I industrial refrigeration for many years, everything from package units with tin can compressors to 150 ton chillers, factory trained by Carrier back when Syracuse waa still the HQ. Carrier went downhill as soon as UTC bought them out in the '80s to use it as a cash cow.

Every good mechanic has that one repair mistake that will give them nightmares for the rest of their life. If they say they've never made a mistake, they're lying.

I think it’s funny you can’t help but sing every time the phone rings. Do dee do. 😂 Have a great day Ray Ray!

@RainmanRaysRepairs

2 жыл бұрын

Maybe it’s a coping mechanism. I even do it off camera

Always check the cabin air filter. I have had several cars in the shop with the exact same symptoms (pressures) and the cabin air filter fixed it.

@robertreed1817

2 жыл бұрын

But sometimes you got a head engineer because they make it so hard to do a simple job my Jeep there were three different ways to have the air filter set up they did two of them

@gimmelmom

2 жыл бұрын

This was the exact issue I had once. The filter change made it better.

@blargblarghonk

2 жыл бұрын

@@Daniel-wl7rl I have seen several models with a/c recirc filters. Most of the time it does not have one but I have seen it.

@alanmoore78

2 жыл бұрын

Changing the biscuits in my van's glovebox (chunky little cabin filters on a GM minivan) made about a ten degree difference last summer (2020) when I charged it after it sat for 2 years unused, and I didn't have to touch it this summer other than verify pressures with the gauge set. Next AC project for me is figure out why my wife's Explorer is bipolar on the passenger side. She'll get cold air out the driver vents and the passenger front vents will cycle hot, cold, hot, cold, with clunky "oh no my servo is worn out" noises to match. Really not looking forward to maybe pulling the entire dashboard. And then I need a heater core in the Town Car and that's another whole dash coming out I don't want to do.

@Harry-zz2oh

2 жыл бұрын

@@robertreed1817 I have two Jeeps and changing the internal air filters is a PITA. I have to remove a bunch of stuff like the glove box to even get to the filters.

I really love these videos, I love the simple video style with a couple of cuts and images edited in and how its not all flashy with high production value like every single other youtuber out there. Keep up the good work!

@sped6954

Жыл бұрын

I agree. I hate it when other KZreadrs start with loud music intros and codas. Just get to the show already! I've got many, many channels on a mental list that I refuse to watch any of their videos because of the level of stupid flashy intros and loud music. Then once you do finally get to the show, one minute in, you're met with a pair of commercials, the first one you can't click past it at all, then you have to watch the second commercial for five seconds before you can dismiss it, and again, this is just within the first minute of the video.

Hey Ray thank you for owning it, world needs more of that. Cheers

Ray - you hit the nail right on the head when you were looking at the temp and pressure chart. Nobody ever figures in the humidity. I am in commercial A/C and the Dewpoint temperature is so important yet nobody talks about that either. That is a real big deal for you in Florida.

@sirich7751

2 жыл бұрын

Hmmmm, not with respect to just refrigerant pressures. I agree the humidity saps capacity from your system because it is pulling moisture out of the air stream but the refrigerant just "sees" dry bulb temp because its a closed system. Humidity is never on the refrigerant pressure charts.

@spelunkerd

2 жыл бұрын

Noobie question. When you read refrigeration temp charts, how do you account for the way the readings shift as the compressor starts and stops? Do you record cut-in and cut-out readings for both the high and the low side, and compare those four readings to the four readings shown in the graph for the ambient temp?

@rossmagwood1381

2 жыл бұрын

@@spelunkerd probably looks for max and minimums

It's nice to sit back and watch an honest mechanic that knows want he's doing work his trade. Thanks

Well done for owning up ! Only a guy who knows he has much more going for him will find that possible. 6 months ago I started my lawn tractor engine with one screw holding the fan guard down. It turned into a steel discus and slashed the top of the engine cover, ripped out the choke cable and cut a long gash in the battery, spewing acid into me and the concrete..which gassed me.. It finally hit me 1 inch away from crown jewels and cut a gash in my jeans a big graze in my leg.... The cover was folded up and mangled. Lesson learned.. If something isn't FULLY bolted down when you start up, it will blind you and eunuch you and bankrupt you and kill you !

"I picked the wrong line of work to hate engine oil." Had me giggling pretty hard!

Love watching your videos. Not all garages explain clearly. Love how you go through it all.

I like this. Look how clean is the engine space. No dust, no mud, nothing.

You are one thorough tech, really enjoyed the video. Nice to see the integrity that goes into your work.

@rickyrobbie

2 жыл бұрын

So thorugh that he replaced the washer on a drain plug that's almost rounded off.....

I applaud you for admitting a mistake was made and not an excuse. You make me proud to be subscribed to your excellent channel. Kids now days just lie and blame everything but themselves for the mistakes they make it seems. It’s refreshing to watch an honest man doing honest work.

Is it just me or has watching Ray's videos become something I look forward to every day with my morning coffee

@jollymary2801

2 жыл бұрын

for me it's in the afternoon, but I look forward to it too...

@mrwp819300

2 жыл бұрын

@psinclairjr It ain't just you, it's me too.

@DougHinVA

2 жыл бұрын

it is just you. this is a silly and useless vid to skip.

@mikehunt908

2 жыл бұрын

You’re not on your own

@franganghi

2 жыл бұрын

No, it is bot just you.

The part where you said you were off to the doctors office, was expecting you to say to have a boot removed from your ass!! 😂🤣😂🤣. Love your videos, keep them coming!!

@localcrew

2 жыл бұрын

Me too! My exact thoughts.

Geeze Ray... Now you've got me doing the dooo-di-dooo-dooo every time the phone rings... 🤣

A true and honest mecanic. I wish that I could find one in my area. :)

Love the screw up story. Sometimes you win, sometimes you learn. Never lose. 👍🏽😬

His mockery of the phone eases my phone PTSD lol

I've learned lots from watching your videos, about being a good mechanic and a honest person. I wish more people had your morals these days.

I used to love working at the shop as a tech now I'm becoming a trailer mechanic! so excited to be getting back in the shop!

Thanks for explaining your thought steps on this. It has been years since I did A/C and it is good to remember things. Stay safe and healthy Ray.

@Badger1776

2 жыл бұрын

Thanks pa

@badgerpa9

2 жыл бұрын

@@Badger1776 That's GrandPa to you, lol joking. Nice name. Be safe.

Customer states: Oil drain plug area now has a leak. customer hopes you didn't replace his special crush washer... please put back my old one. LOL LOL

@ls_812

2 жыл бұрын

I had a customer freak out because he saw washer on his receipt and thought we added washer fluid to his "special" fluid he uses. It was the washer for the drain plug.

i'm betting the good humor and bubbly personality allows for everyday struggles to be handled with more ease and less stress. this man seems like he handles himself well, handles the job well and can roll with the punches.

To have this guy as your mechanic would be a blessing.. he is amazing

@rickyrobbie

2 жыл бұрын

This dude is clueless.

Mark of a true professional: uses a torque wrench on EVERYTHING... "Click".

@karabinjr

2 жыл бұрын

it helps with mental exhaustion, actually. eyeballing stuff is torture for a thoughtful person.

@njsongwriter

2 жыл бұрын

Really? I didn't notice that. 🤔

@shorty808100

2 жыл бұрын

I been working on cars my entire life I only torque engine parts, and important parts there’s a lot of stuff that you can generally torque and it will be fine but some thing like anything in the engine has the be in spec and I’ve never had problems with this method

@kimyusof6780

2 жыл бұрын

I call bull shit

@txmarine4hire

2 жыл бұрын

@@kimyusof6780 enlighten us.

Thanks for sharing that "screw up" story.. Love listening to them, for some reason... lol Thank goodness it didn't bend any valves on ya! One I can remember was back in '99 or '00 when I was 19, at my first shop. I was doing an oil change on one of those mid 90's Lincolns (with the air suspension switch in the trunk, that you're supposed to shut off before lifting the vehicle).... Well, of course I was in a rush that day and forgot to turn the switch off while doing an EOS. I drained the oil, changed the filter, etc and then realized after letting it back down, the car looked like a lowrider in the back (I'm sure anyone who's dealt with those knows exactly what I'm talking about!). So, I immediately panicked (and prayed I didn't damage the air bags) and fired the engine up to see if it was alright... It was fine. BUT after about 45 seconds to a minute of watching the thing pump back up, I remembered I didn't put any oil back in it!! I RAN and shut it down, and filled it with oil, and WHEW!! It was ok... That scared the crap out of me though. LoL

Just want to say a big thankyou for these entertaining and informative videos. I don't have much experience with maintaining my own Toyota Hilux pickup (2003) apart from oil change but having watched your videos on mass air flow sensors and problems caused by leaks in the air intake system bypassing the sensor, I found I had such a problem. I assumed that my pickup was just aging as it was fairly unresponsive and assumed that was it until the day it would be scrapped. However, when checking my air filter I noticed that the rubber hose on the up-side of the sensor was badly cracked/holed in many places and on replacing the affected rubber hose my pickup is now way more responsive in acceleration. Life in the old beast yet...! Just wonderful to hvae my old pickup come back to life again.

This guy is a good automotive technician - Nice to see . Stay solid ! Thanks big buddy

@22:51 - keep in mind, you have the driver side window (and door, if app.) open. So hot air is getting inside the car from the bay. I would close the door and window and let it run for a minute or so for a better reading on the inside temperature.

@csgergo80

2 жыл бұрын

The gauge is measuring the temp of the air blown in via the center vents, and the specs did say use outside temps to measure against, not recirculated air inside.

@ahotdj07

2 жыл бұрын

@@csgergo80 Thank you.

Always double check the steps. Sometimes someone who's been working on cars for over 20 years could forget to put the drain plug in and attempt to refill the oil. The guys in the shop will never let me forget that day.

@RainmanRaysRepairs

2 жыл бұрын

lol done that before

@bullypopful

2 жыл бұрын

Just happened a few weeks ago, put the drain plug in by hand, got distracted by a customer telling me how to do my job, forgot to use a tool so of course "I wonder where that drip is coming from." Talk about embarrassment. Thankfully we double check every time to look for any potential leaks, hence how I found my mistake, so we didn't send it out the door, but it's not a good feeling when the customer sees the mistake in real time, that's for sure

@peterl2017

2 жыл бұрын

@@bullypopful I hated that at a shop I used to work at, the customers would be over with you, not every one ofcourse but the odd one that never shut up the whole time. It’s OK to be friendly but hey, I am trying to concentrate on my job. Bad practice, customers should only be in the bay when you are letting them see something. To avoid the drain plug problem. I made myself a routine where I would never leave a drain plug hand tight, if it was going in it got tightened with the wrench. In and tight or not in at all.

@bluthefox

2 жыл бұрын

I worked the pit at a quick lube many years ago, we had a kid working topside that started dumping blue water down the oil fill while I had the drain plug out of one we had in the bay

@Dis-Emboweled

2 жыл бұрын

@@bluthefox engine flush!! 😂🤣

I do all my own mechanical work. But if this guy was my local mech6, I'd take it to him. Trustworthy guy

I'm a newer viewer, first time to leave a comment. I'm enjoying your content. You do a great job with video and walking thru step by step. I'm a commercial HVAC installer, service and repair tech. I like to make sure all vents are open and the filter is on the cleaner side when I'm looking at a service call. Then I like to run the a/c for 10-15 mins at normal outdoor temps. Then I look at the pressures and delta on the system, before I add or leak check system. I gone out on jobs that are over charged because the Tech didn't take the steps on trouble shooting a system. I learn things everyday, It doesn't mater how long your in the trade. We learn how to resource, to get the job done. Anyways enough of me talking. Again I like how you trouble shoot, document with video and notes! It makes it much easier to show a customer to help understand or to protect your Shop and your self Need more guys like you in these shops, doing what they love and taking care of the customers. Keep up the great videos and job!

I grab the washer with plier and spin the drain plug off

@throttlebottle5906

2 жыл бұрын

yeah, that works well sometimes.

"See, now it's personal." LOL. Actually laughed. Thanks for the video

When you love your job.. like this guy… you get great service… this guy could teach master classes …love how he cleans as he goes …great personality also

this video was super informative thanks for taking the time to explain everything!

I totally ignore people who start yelling at me from a distance. If they want to speak with me, walk up and act like you've got some sense.

@elvd1296

2 жыл бұрын

Seriously

@xforce687

2 жыл бұрын

Or people pull up and say HEY! Whistling is probably the most disrespectful things.

@larrykeenan598

2 жыл бұрын

@@xforce687 I hate the whistling thing too. Cops are bad for that crap and saying Hay, come here.

@RainmanRaysRepairs

2 жыл бұрын

I reply with “ I can’t hear you” every time, until they walk up to me to make proper conversation. The person still doesn’t learn.

@larrykeenan598

2 жыл бұрын

@@RainmanRaysRepairs Try mouthing the word "I can't hear you" without actually saying anything and see how they react. I worked with a guy who was hard of hearing and I would start talking to him and slowly stop making a sound but would keep moving my mouth. His reaction was hilarious.

This is quickly becoming my favorite you tube channel, even if I don’t learn anything new he is definitely entertaining.

I've turned wrenches off and on my entire life, my Dad used to race stock car, blah blah blah. That said, none of us were ever certified (ASE, etc) but listening to you, not just talk, but hold on a lengthy, one-sided conversation with rigs you work on, made me realize something. Now, since most us have held a conversation and ARGUED with a vehicle, I realize, speaking only for myself, that I must actually be a professional, knuckle-dragging mechanic!!! What solidified my thought when you stated that it became personal. Thanks for the videos, learnin and laughing are always fun.

@gotdangedcommiesitellyahwa6298

2 жыл бұрын

HAHA indeed. I've often talked to parts and vehicles, or referred to something that was uncooperative as "you little bi+ch".

@goodtimejohnny8972

Жыл бұрын

A lot of pros aren't ASE certified either.

HAHA..."if you dont start screeching at them from across the shop" Man I love your sarcastic sense of humor! your the best!

I have often seen that the excellent techs in a shop will always be the ones to freely admit their biggest screw-up. Your Volvo story told me you are one of the good ones. We all have them, and we learned from them. Me personally, to this day, when I do a tire rotation, I do not stop the procedure (no matter what happens around me) until I have rotated all four tires and TIGHTENED all lug nuts on all four wheels (it is either 20 or 25 of them every time).

@61rampy65

2 жыл бұрын

First, good idea to do the tires all in one process. It's easy to forget when you stop for something else. Second, how can there be 25 lug nuts on a vehicle with 4 tires? Maybe you meant 24?

@rex_s80

2 жыл бұрын

@@61rampy65 maybe full size spare being rotated in on a 5 lug car?

@vettefan73

2 жыл бұрын

I had a customer come in for an oil change (that's it) and they came back later that day saying I didn't tighten their lug nuts. bring the car back and the lug nuts are literally stripped half way down the studs. Service manager tried to burry me as the scape goat until I mentioned to him the vehicle history showed brakes were done like 5k miles ago so I didn't even bother to check them and they didn't request a tire rotation so why would I bother taking them off? Furthermore, I explained that the lug nuts were stripped half way down the studs (the threads close to the wheel were gone, almost like the nuts were pulled off the stud, shearing the threads off) and 1, I had no clue how that could have happened, and 2, the vehicle was driving fine. when I pulled it around to give HIM the repair order. That service manager had the mentality that the customer could do no wrong and regardless what their complaint was, they were right and it was always the technicians fault. we had the highest customer service scores in the area, but the lowest shop morale when he was the manager.

@rvndmnmt1

2 жыл бұрын

Yep, same here. Basic rotation and oil change and tire work gets done first. Doesn't end till I have wheels torqued. Then I do the oil change. That way when it's on the ground it's on the ground.

@vwsyncro

2 жыл бұрын

Totally different setting, but as a climber I stop talking when I tie in to the rope on the ground. I force myself to finish the procedure before doing or even thinking anything else. I got to witness countless human mistakes as an instructor. The most common scenario was people getting distracted during a critical step ('oh wait let me get my shoes') and then forgetting to pick up where they left off and automatically going into the next step. When they also missed it during the final check I intervened by saying 'hey, you might want to check again'. It usually scared the shit out of them, and there was absolutely no need to for me to patronise. So if you ask me, it doesn't make sense to fire people for making mistakes. Humans make mistakes. The good news is that we learn from them. I'm a big fan of creating an environment where mistakes are shared, analysed and learned from rather than punished. I know a guy who's a programmer, and his boss put up a board to record mistakes, and when it reached a certain number he would buy the whole team cake.

Thank you for not over-torquing the oil drain plug with an impact! This is very relieving to see lol.

@rickyrobbie

2 жыл бұрын

Who TF does that? I have NEVER seen that....EVER.

Rainman, I see your favor tool is brake clean you must be # 1 You're the best mechanic in Florida keep up the outstanding service.

Good work! Glad you put the oil drain plug in the vise.

I'm retired but worked on a school fleet in Phoenix when I was a young man and air conditioning was R12. We never evacuated, simply took out the valves and let the freon blast out. R12 was cheap. We just did the repair and filled it a bit and started the vehicle up and kept filling until the pressures looked about right. Those big bottles of R12 were about 30 bucks.

@meeder78

2 жыл бұрын

Ah the good old days where you could just blast a hole in the ozone layer 😬

@lawrencehenson8494

2 жыл бұрын

Freon is HEAVIER than air.

@jeffs2809

2 жыл бұрын

@@lawrencehenson8494 uv (sunlight) breaks down the Freon. The Chlorine atom joins with o2, which destroys the o3(ozone).

@56redjets

2 жыл бұрын

I bet you used compressed air to blow out the brake dust too. Am I right bro!!!!!!!

@wssides

2 жыл бұрын

@@56redjets Yes, and the clutch dust out of the bell housing!

After watching a few of Ray's videos I find myself singng "doodle, oodle, oodle" every time I hear a phone ring! I "click" every time I tighten a bolt, too! Ray, you're creating monsters! ☺

@martinedeards5424

2 жыл бұрын

i HATE that ring tone 😂

@LaurenceCMag

2 жыл бұрын

Or click!

@Brandon_Nelson92

2 жыл бұрын

Reeeee! 🤣

@lrich8181

2 жыл бұрын

It sounds like guard song in The Wizard Of Oz.

@martinedeards5424

2 жыл бұрын

@@lrich8181 OHH WEEE OH... ohh weee ohh

"Blue water" I love it! If you need to ask, you need to watch more Rainman Ray's Repairs.

Your channel was recommended to me from an SMA video. I like your channel so far as well. Keep up the good work.

Owwww, I hit my head when you dropped me, Reeeeeeee!

I'm a retired tech rep and you sir are the kind of tech I used to enjoy working with. It was a pleasure watching you work and hearing your thought process as you went through the diagnostics.

@robertreed1817

2 жыл бұрын

If you want to see the exact opposite look for the title Jiffy Lube screws up my Jeep

Thank you for sharing that story very brave of you but hopefully it will prevent others from making the same mistake

good job, really like that you just didnt replace the valve and let the customer see if its alright now. just in case they already have a diagnose from you in the future if the problem keeps coming back. greetings from Germany!

What brand is the ratcheting box wrench you used on the expansion valve, Snap on? Also, the oil change story is a good lesson for young techs. Admitting your failures and not making excuses, that's how you become a good technician.

@fomoco300k

2 жыл бұрын

I’ve asked about those same wrenches on a few of his videos. Still wondering.

@as3sxp

2 жыл бұрын

@@fomoco300k I thought they might be Mountain Wrenches. He may have said at some point, I just can't remember

@RainmanRaysRepairs

2 жыл бұрын

Mine are Matco, but they’re rebranded Mountain wrenches

@as3sxp

2 жыл бұрын

@@RainmanRaysRepairs Thanks!

@kg4gav

2 жыл бұрын

@@RainmanRaysRepairs Did you delete my comments identifying the wrenches? Why?

The really expensive mistakes are the ones that really, REALLY, stick with you. I had a similar mishap in 1985 with a $23,000+ Circuit board in an Air Data Computer. A supervisor came up while I was working with the unit, wanting to talk, ask questions and generally shoot the breeze while I was working. I was distracted by the conversation and inadvertently swapped a power supply card with an Arithmetic/Logic Unit. All of the connectors were the same, with just a diagonal line on the tops of the cards (I think it was 14 cards in sequence) to differentiate locations. Being distracted, I did not notice my mistake before powering up the unit and watched the card as it smoked in less than 3 seconds. The ALU could not handle the input voltages intended for the power supply card. I wasn't reprimanded or made to pay for it, the supervisor knew that it was his fault for the distraction, but I sweated having to pay for that circuit card for weeks, on an E-3's pay. To this day, if someone comes up while I'm working, no matter what I'm working on, Cars, small engines, sewing machines, computers, cooking or whatever, I stop all work, wait for them to finish flapping their gums (which it seems is all they ever really want to do), and make sure of where I was at and what I was doing before the interruption while getting back to work. I've gotten to where I can barely tolerate anyone even watching me while I work and will stop until they get a clue and go away. Sometimes I even have to provide the "Clues" or I'd never get anything done. "Valuable" lessons last a lifetime. Thanks for sharing yours.

@robertreed1817

2 жыл бұрын

But that was on the bus not you we had a similar thing happened with one of our machines that went out to Vegas to a show and they had a throw this thing in a day and it was supposed to say the company one of the things we said was the battery terminal should be different so they cannot cross them they told us just get it to work okay fine not only did it work but it looked awesome 1 of 1 the entire company depends upon its success day two they hooked up the batteries backwards buzz buzz puffs they call us at home on a Sunday to ask how long would it take to build another one you said a day and a half maybe two but we don't have the parts that company is no more but we went into work and took everything all our tools everything before Monday even hit we knew that they were done so we got a ton of stuff out of there fiddled around Monday through Thursday Friday we will call to have a meeting companies closing don't come in Monday here are you a checks then he said go cash him now so they'll clear didn't understand we built the stuff we went and smacked engineers and said that won't work naked so it will repeat up the quality control guy because you took a magic marker and made lines and dots all over the place because the blueprints said if needed but it wouldn't go there physically in the real world that's why it was wired the way it was wired but it was permanent marker that was a different unit going to a customer I brought it to a friend that did airbrushing for cars the coven the lines and dots I had him charge them $5,000 for 1/2 hours work

@ColinWatters

2 жыл бұрын

Some years I learnt to fly gliders. Early lesson was if you get interrupted while doing safety checks you start over.

Good vid. Learning from mistakes 👍 Those small vices are incredibly valuable tools.

Love the AC content. Don’t know a lot about automotive AC systems and I learn something every time.

I left a breaker bar on the crank bolt by getting rushed and turned the engine over and broke the timing chain on a customers car once. Lesson learned, dont let people rush you.

@Fabien2626

2 жыл бұрын

I made the same mistake once! I got lucky, the wrench came of by itself on the impact.

@thedarkmage7373

2 жыл бұрын

When my service writers rush me I tell them "it will be done when im finished, if you want it done faster then it's not my fault and I better get paid if it cones back."

I don’t want to be “that guy” but I think that “click” on the drain plug was simulated.

@privilegedwhitemale306

2 жыл бұрын

CLICK

Just a note, as a Kia technician, at the connectors from the evaporator to the expansion valve through the firewall on the newer vehicles with 1234yf. We find corrosion a lot of times causing a leak so it’s a good idea to pull the expansion valve to see if the evaporators leaking. However I’ve not found it very often on these older optimas with 134

I likes that on the AC Great info...I was familiar but was mostly on other repairs on appliances...you made cautious eval on it.

Hello Ray. Next time you're trying to get the gasket off the drain plug, use channel locks & the ratchet/wrench you used. Grab the gasket with the channel locks, and just unscrew the gasket. Grip hard and should be good to go ~

@MJTAUTOMOTIVE

2 жыл бұрын

Was going to mention the same thing. It was painful to watch.

@allenlovestia1982

2 жыл бұрын

I figured that was the obvious route, but hey, sometimes you do it for the show I guess. I don't do anything without a set of vice grips nearby. It's only detrimental, or a bad idea for those who don't use their brains while using them.

@CompuFixMobile

2 жыл бұрын

You got to understand that his a general mechanic, nothing special here. He's not fixing BMW's or other German cars that require special techniques and tools and brainstorming to repair them stunning pieces of machinery! lol

My first job was at the corner gas station. On the weekend after mechanics went home for the day. Some time we took in tire jobs and oil changes. Will this guy in a Corvette came in for an oil change. I turned him away said he need to come back when the mechanics were here. It was so low and we had center post lifts it just barely cleared. Well this guy I was working with heard me turn him down. He said I can do it. Well I was pissed and left him to it. At the time gm used two oil filters types / sizes. One had the gasket near the center and one toward the out side. I told him to put the right filter on. He said he knew what to do. This kid was a grandson of the owners best friend. Well he put the wrong filter on filled the oil ran it rechecked the oil and sent the guy on his way. I'm out side pumping gas as this guy backs out and heads to the exit. Soon as he put it in drive and gave it gas oil started pouring out the bottom. I dropped the pump handle and ran him down yelling to turn it off. I hand pushed it back in put the right filter on and refilled it. Saving the motor the station owner money. I told the owner what happened that night but that kid kept working but never changed oil or tires the rest of the time he worked there.

@peterl2017

2 жыл бұрын

Great story. Everybody screws up and too bad this couldn’t have been a learning experience instead of not letting the guy learn and keep working. Unless he had a bad attitude of course. I worked at a shop, not sure how many years I worked there at the time but I used to order my own parts. I wasn’t just an oil change jockey, I was doing my apprenticeship and all kinds of work. One day I did a basic service but turned into some kind of extra problems, anyway at the end of it all I forgot to mark down an air filter on my work order sheet and the customer never paid for it. I realized it and told the boss right away, and before they found the mistake. After that I was no longer allowed to order my own parts. It really hurt and I always thought I would have rathered him warn me and say “next time it will come off your pay”, or I would have had no problem paying for the filter that time. People make mistakes - make them accountable but allow them to learn and go forward.

@j_taylor

2 жыл бұрын

@@peterl2017 Completely agree! Good employees and bad make mistakes. The difference is what they do next. The good ones learn, the bad ones don't...or worse, they lie to cover themselves. That shop should have just let you be a good employee. Instead, it sounds like the only thing the boss would accept was a cover-up. I hope you quickly found a place worthy of you.

Not even sure why I enjoy this so much because it is basically me extending my work day since this is exactly what I do for a living.

Another well done repair. As usual you make it look easy.

I don’t mind engine oil, it gear oil that gets to me. Great video, thanks. There’s that phone ring again🥳

@garyalford9394

2 жыл бұрын

Yeah my wife hated it when I had her watch the timing marks on my Harley through that little inspection hole that would spit out 90W ! LOL

I have almost zero skills with engines etc... but I really enjoy your videos. and I am learning a lot of stuff! Still going to let a pro work on my car.

I wish you were in Southern Californian man Your such a honest mechanic and we need more like you here

You gotta love your job. Love the phone sounds and other sounds you make.

It's a good thing your learning experience involved a non-interference engine. Otherwise it would have been much much worse lol

Tip. Air over condenser makes a large difference. Put a large fan in front of the vehicle to move air over the condenser. Vehicle condensers become heat soaked with engine heat and don't allow from proper expansion.

@RainmanRaysRepairs

2 жыл бұрын

When condensers are too hot, or the fans are inop, the high side pressure goes to the moon, if I start to see 250-400 psi I’ll bust out a shop fan

Kia did a good job protecting the under belly on that model.

after many years of DIYing my own 20 year old trucks and jeeps, I cant imagine working on an engine thats so clean. LoL. Thanks for vid.

When I worked for a GM Buick dealer here are some crazy things I saw. 1. Brand new 1986 Grand National rolled off the front top of a auto carrier. 2. Brand new sold 1989 Buick century fall off of rack sideways. 3. Old man drove his LeSabre into shop and plowed through the new service desks. 4. Old woman sitting in car on service drive just died on spot. 5. 1987 Buick Century in for oil change, FBI comes to shop and tears apart rear of car. Found many bags of cocaine. 6. Person started a buick estate wagon on showroom floor and drove through showroom window. 7. A man and woman bring in their Buick Skyhawk for oil change and waiting, found couple in the conversion van having sex and in the showroom. Sales opened 0900am, they brought car in 0800am. The van was rocking and they were loud. 8. A new mechanic who said he was great, installed the lifters upside down on a Quad-4 engine. Engine wiped, he quit on spot. I got stuck for engine replacement free hrs on me (promised great juice jobs to make up) not.

@paulrooster2108

2 жыл бұрын

One Shop I was working at ( FNG ) been there about 2 months had a F-350 up on the Ole twin post I beam lift doing oil change, Replace Brakes , Rotate tires . I was in the next bay with a workbench separating us working on a Borg Warner Transfer Box outta a Ford P/U , I stepped away from the bench to go fetch a Coke got about 2 feet away an heard a Bang an CRASH , The Nose of the truck had slid off the front half of lift an rolled over on my work bench .

@9ZERO6

2 жыл бұрын

I had to stop reading after number #1 and take a few minutes to cry.

@badgerpa9

2 жыл бұрын

Late 1980s I saw an Audi come off the top row of a truck while going down the Interstate. I was driving a dealer trade back to the dealer I worked for. A couple hours later the truck showed up at the Audi dealership that was part of the same company and the driver did not mention anything. Lucky for me I did truck check ins when I was working, the car was an ordered car and it was totaled. The best was a very old man that found what he thought was a rat that had been chewed on by a cat in the garbage and told everyone about it, it was a used tampon that was not in a bag when disposed. A customer (Pastor) walked in the dealership managers room without knocking and caught the manager and new office clerk a young college boy getting busy.

If we don't learn from our mistakes, we are doomed to repeat them! Thanks for the video.

Ray I just started watching your videos and you are such a professional! I wish you were our Mechanic. You rock!

so glad I found this channel. thank you for the story.

I remember reading a comment not too long ago basically stating "never roll down a customer's window." Thank you, Kia for showing everyone WHY we roll down the windows of our customer's vehicles

@dave1135

2 жыл бұрын

I'm retired now, but I ALWAYS rolled down a customer's window. I had 2 cars, early in my career, that I heard the dressed "chunk!" Of the power locks engaged when I shut the door, then waiting on a lock smith to come to the shop I worked at to unlock the door. I have a set of door opening tools, but the shop wanted a bonded locksmith to do it in case of damage, it'd be his problem, not ours

@MrSloika

2 жыл бұрын

Polish guy called the dealer where he just bought a new car and asked, "What is the cheapest window on this car to break?" Dealer asked the guy why wanted to break a window on his brand new ride, and the Polish guy replied that he locked the keys inside the car. The dealer informed his customer that there was no need to break a window, he'd send a lot boy with a duplicate key. The Polish guy said, "OK, but hurry up. It's going to rain and I want to put the top up."

@johnaclark1

2 жыл бұрын

Yup. I always roll down a window in every car I pull in. I had one up on jackstands, in Drive, to check front wheel bearings. I got out to go listen at the wheels and the door shut behind me. When the wheels got to 9mphi heard the doors lock. Uh oh...had to call the customer for their spare key. After that every car gets the window rolled down. I'll risk having to repair a window once in a while as opposed to having keys locked inside again.

@henrydillard6217

2 жыл бұрын

Have you ever been blamed if the window wouldn't roll back up?

@johnaclark1

2 жыл бұрын

@@henrydillard6217 Nope. Not yet. When/if that happens will deal with it.

You’re sir are an angel for turning off the high beams! The rest of the road users are going to thank you, at least I’m going to :3

@miniaturemachinist6098

2 жыл бұрын

Back when I worked at Grease Monkey one of the things I always did was turned peoples high beams and fog lights off. It was nice to see someone else do that as well.

@sicklad3277

2 жыл бұрын

@@miniaturemachinist6098 Is this a thing in the states? If you did that where im from you'd have every truck/4wd burning your retinas out.

@miniaturemachinist6098

2 жыл бұрын

@@sicklad3277 It seems like more and more people are driving around with their high beams on. It is kind of dangerous to drive at night now with how bright oncoming headlights are now.

@sicklad3277

2 жыл бұрын

@@miniaturemachinist6098 Thankgod its a law here in Australia, I'd end up with a ticket if i did that.

I love how you torque those bolts down with a verbal “CLICK”

@basil30

2 жыл бұрын

Doodle ooddle ooh