what kind of video ends before the job is complete???????

Thanks for the video and the new seat cover. Was a bit harder than I expected but those things are always tough the first time you do it. Turned out really well!

Excellent explanation

Perfect description. Thanks so much.

For the seat heater connector pins. This is the only hard part. 1-disconnect the harness. 2- disconnect the plastic housing from the bracket (pulling towards the pedal). 3- The Black and the White connectors are coupled together. They both have to be removed simultaneously. 4- Push the 4 sloped pins, top and bottom at the same time to disconnect (that is the aweful part).

@geraldmcneal7110

Жыл бұрын

I'm stuck on that part thanks I trying it in the morning

@huckdeep

Жыл бұрын

This is accurate. The white and black clips must be removed together. It took me for ever to get them out.

Just found your channel , thinking about doin front seats on my 2011 c class facelift. But i have air cushion adjustable seats. What do you know about that , is it also possible.

Will order your product

If you swap out the bottom from a heated to nonheated and keep it unplugged, will it do anything more than throw a code?

The most challenging part of removing the seat is removing the seat heater connector. It would be nice if you showed that portion. Or, at least showed pictures of the procedure. Others have mentioned disconnecting the harness as the first step. Others have said both connectors (White and Black) need to be removed simultaneously. You show a disconnected harness, but nothing shows how to disconnect it. Does anyone have any tips? Also, how the heck do you push 4 pins at the same time to remove the two connectors? I'm assuming there are 4 because both connectors have a visible pin, and there are probably 2 on the other side. I'm considering cutting and splicing. Someone in another video did that because it was easier. It's only 2 wires.

Man this is a nightmare to replace!!

I appreciate the effort to make a video, but your hands cover up the most important parts. Would be nice if your company would invest in a cameraman to point the camera at the actual work.

I can’t for the life of me release the pins to release the seat from the car! Please help

Nevermind , just found video on that . Same procedure

The driver's seat always suffers more wear and tear. Can you swap the driver and passenger seat bottoms with each other?

@geraldmcneal7110

Жыл бұрын

Yes but the wire for the heater isn't long like the other.

This must be an aftermarket seat pad? I just purchased from the dealership(11/23/22) "bottom pad," and it comes with the heating element, meaning it's all complete. Just pull the old one off and slip on a new one from the dealer for $350. I can't get that wire to unplug h3 shows in the pic 😫

@rogergrant586

3 ай бұрын

Do you have a part number for the dealership item? This seat cover is a nightmare to replace. The blue plastic rods are impossible to attach to the clips unless you cut them shorter, because the length overlaps the heating element, so you can't make the "incision" as suggested in the video without cutting into the heating element, which of course would ruin the heater.

Does your tan seat cover match the factory color of the glk?

@richmondautoupholstery

2 жыл бұрын

Correct, our covers are manufactured using Original Mercedes-Benz colors. Please check our website www.RichmondAutoUpholstery.com

@COVIDisA_HOAX

2 жыл бұрын

@@richmondautoupholstery cool I had to return one on ebay because the color didn't match...but I did see your listing on ebay ..thanks

@kimunyest5148

Жыл бұрын

No . I just order for my GLK 350 driver seat cover in black from Richmond and didn't match original color and cover pattern is different . I don't know about other colors

Is the c class heated bottom seat direct fit on the glk ? PLEASE HELP!!!!!!!!!!!! 🙏

@richmondautoupholstery

5 ай бұрын

There is a 2 Piece & 3 Piece center but yes they will fit each other.

Would this be the same for a Glk?

@richmondautoupholstery

2 жыл бұрын

That is correct, same process on the GLK.

Can’t see it bro

Cutting the pad along the attachment points kills the seat heater. It has fibers sewn throughout the grey padding.

@kauveahan1117

2 жыл бұрын

I followed the video instructions and my heating element works just fine on my C350 Sport.

@rm2245

2 жыл бұрын

@@kauveahan1117 how much time it took you? And on a scale from 1 to 10 how difficult was the task in your opinion?

@Jeff-pz8vh

Жыл бұрын

@@rm2245 I just did it. Took me about 3 hours from start to finish. Would give it a 5 for difficulty. If I did it again I bet I could do it in an hour. I am pretty happy with how it turned out as well as it matches very well to the existing seats.

@rm2245

Жыл бұрын

@@Jeff-pz8vh i am about to do it this weekend and the only thing i’m worried about is the heating element. Did you transfer it exactly like in the video and while still working?

@Jeff-pz8vh

Жыл бұрын

@@rm2245 just be careful not to cut it and you’ll be fine. Yes I did exactly what he did above. One tip, there is an extra step for the electrical connector you need to remove for the seat as there is a tab on top and the bottom of it. I wasted 30 minutes on that. I also have a little storage compartment at the front of my seat on my glk. If you don’t have that in the way the job is much easier. In any event I’m quite happy with it as it is pretty much a perfect match and the cover is good quality.

Other than the atrocius audio, most of the work not being in the camera's view and no upclose view of the releasing of the clips ( a pretty important piece of the puzzle), it was an otherwise incredible video-NOT!

@lilpetey1032

2 жыл бұрын

I thought it was a great video dick

@ML-dc4qw

2 жыл бұрын

@@lilpetey1032 hey Lil Petey,grow a pair.

@kauveahan1117

2 жыл бұрын

Video was helpful to me, wasn't awesome but was defiantly helpful.. Didn't need audio cause I am not blind, maybe offer your services since you are a perfectionist.

@ML-dc4qw

2 жыл бұрын

Lick it Koovay !

@Dolfski

2 жыл бұрын

Got it done easily with this vid, Maurice you a soft fish.