Revival Of Our Stirling Engine! | Stirling Engine Generator repair!!
Ғылым және технология
Hello Everyone!!
In this video we have repaired our Good Old Stirling Engine Generator which we had made two years ago as our school's group project.
We had used some easily available things like tin cans, cycle spokes, iron wool, brass couplers, balloon and some plywood for the entire structure. The displacer piston is made of iron wool, the power piston is made up of a balloon while the crank shaft and connecting rods are made of cycle spokes.
A year ago, for some reason power piston was destroyed and the colour was washed away...
So we decided to restore it completely as it was was our Second Prototype of a Working Stirling Engine and First Prototype as Stirling Engine Generator. The brightness of the LEDs may seem to be a less as we were filming outside in daylight.
Make sure to like, share and subscribe to our channel. If you have any suggestions please comment below!
Thank you very much!!
music :
1. Thefatrat origin
2. JJD future[ncs release]
Пікірлер: 12
It's running again 🔥
U both r 2 good keep it up
@dcbuilds5719
3 жыл бұрын
Thank you
تسلم ايدك💯💯💯
@dcbuilds5719
2 жыл бұрын
Thank you
Please make striling engine making video sr
👍🏼👍🏼👍🏼👍🏼
at 1:44, metal couplers are Undesirably HEAVY.!!!
@dcbuilds5719
3 жыл бұрын
Sir, those brass couplers are not at all heavy though... and again we used whatever cheap things we had at our home... Anyway, thanks a lot for your suggestions 😁
at 2:30, that is not a diaphragm; it's still JUST a balloon.
@dcbuilds5719
3 жыл бұрын
Sir, we didn't mention it anywhere though😅... And even though it's a balloon, it did function as a good power piston for our project and gave no problem... And we used whatever cheap material we had laying around at our home... And I guess a balloon can also function as a diaphragm... Anyway, thanks for watching 😁