I've had a 986 Boxster for over 13 years now and really the best things to do to get the most power out of them to redo the exhaust and intake and then slap tune - the combination of both really improve the car's performance. The diameter of the entire stock exhaust piping on these things are so pitifully small (deliberate on Porsche's behalf to keep the better balanced chassis of the Boxster/Cayman from ever possibly going toe to toe with their star child 911) The USA models have 4 catalysts and taking out the secondary 2 catalysts and replacing them with wider diameter piping makes for increased exhaust flow and more power and it will not trigger any emission codes because the secondaries are not hooked up to any o2 sensors - they're mainly for filtering the exhaust emissions just on cold start anyway. The other heinously restrictive part are the stock exhaust manifolds. That is actually where the majority of power is being held back. Getting a quality aftermarket header and welding a catalytic converter to it right after (or bypassing it all together) frees up so much restriction it is truly unbelievable. Soul Performance and Fabspeed actually make great full exhaust setups for these cars, but they're insanely expensive and one could have reputable exhaust shop fabricate the the parts for way less - except maybe the headers (although IMO Fabspeed's design has poorly fabricated merge collectors on their headers). The one other real performance enhancing mod would be the addition of an IPD intake plenum coupled with their larger diameter throttlebody (or a TB out of a 997). This obviously increases more airflow to the engine. Cone style cold air intakes don't really do anything on these cars. The airbox is already optimized to draw in a cold charge of air, but dropping in a higher flowing air filter will definitely help. BMC and AEM are my go-to filters, but K&N's are fine too. I've also heard of some people installing the larger airbox off of a 987 which would again, add more airflow to the engine(common theme with the car). Getting a solid tune with both mods makes the DME computer recognize and utilize the increased air/exhaust flow and that's when everything sort of "synergizes" together and these cars really do get more lively.

@mwong987

Жыл бұрын

Hi Kevin, first of all, thanks for the info -- i just bought a 986 with the 2.5L engine ( 84,000 miles on it ).

@Adam_Clegg

Жыл бұрын

If Fabspeed is not all that great what would you recommend?

@ernie3537

Жыл бұрын

​@@mwong987nice man just got one with the same miles, have you started modding it ?

@ernie3537

Жыл бұрын

💯 thank you sir

@MrDontask007

7 ай бұрын

how much power did you free up?

I've owned 2 Boxster one with stock suspension and one with the Eibach lowering springs and Bilstein shocks. I loved the aftermarket suspension, handling was great and gave it a nice look, but I didn't love the scraping and no adjustability. I highly suggest saving up for some decent coil overs or stay stock

The Boxster suspension is so well tuned from the factory I wouldn’t be changing spring or damper rates.

@MattiusMaximus

Жыл бұрын

It’s done to a cost, I can be improved, especially if you have other upgrades. I have KW Variant 3 coil overs set up to 996 GT3 specs, but equally I have full GT3 conversion around this (so full hub and brake conversion, brake ducts etc). My Boxster also runs a lot more power than standard and an LSD to put down that power, so I definitely want suitable suspension because that standard units wouldn’t be sufficient. For standard cars there’s also a big difference between oem spec, and oem suspension. Anybody running the original suspension on their Boxster should be prioritising replacing it, even if it’s like for like with oem just due to age. These are old cars now and running 20 year old suspension that’s never been replaced or refurbished will be noticeable.

@PNoblesGarage

Жыл бұрын

I concur, save the money and put it towards a 911 Gt car for the track…

@jadmann

Жыл бұрын

The window regulators have absolutely nothing to do with performance.

@jadmann

Жыл бұрын

Don recommend steel, I recommend ceramic for the roof.

@jadmann

Жыл бұрын

Boxster is a money suck. Porsche designed the Boxster to save the company but also wanted to protect its future survivability by flooding the market with upgrades and replacement OEM. Again, money suck. Just the name Porsche commands an add-on TAX of 15-25%!

I was under the assumption that the push rod ends should be plastic and we’re engineered to be a “weak point” to break the $10 push rod ends rather than kill the top motor if you have a metal one in. Someone correct me if that’s false but that’s what I’ve always been told

I have a 986 in Yellow - 2003 model with only 18K miles on. It looks exactly like the one on your thumbnail. I've had 4 986 Boxsters (one when released!) and 2 987 models, but I still prefer and love my 986! Great video! Haven't needed to sort the IMF yet.

Just what i wanted to watch! Fantastic advice and a great watch. Thanks Lee

@9WERKSTV

Жыл бұрын

My pleasure, thanks Sam.

Great video. I have a few Porsches and this is all good info.

Love these videos. Being from the states I'd love to have the links handy to the US site as well. But I can find the parts easy enough so no worries, and thanks for the video 🙂

You should look at superpro poly bushes. They have all the positive of harder bushes but very little nvh and maintenance required over time. They are pricy to change though and depending who you speak to, much better quality over the powerflex items

The pushrod should be kept the OEM plastic. It acts as a fail safe. It’s designed to break in order to protect the motors from over working and burning themselves out.

@live1053

Жыл бұрын

if the pushrod breaks, as designed, the roof can be operated manually contrary to what's stated in the video.

In the market for a 986. Thanks for the content!

@9WERKSTV

Жыл бұрын

My pleasure!

The only small issue I see is B6 Bilstein Shocks is for stock ride height and B8 Bilstein Shocks is for lowering springs. B6 is suggested in the video with the lowering springs which will lead to premature failure.

underdrive pulley, 987 airbox, custom air pipes leading to a 996 throttle, and a custom map. the only good thing about that dansk sausage is the weight. fvd export muffler is great.

987/997 seats. One of the best mods you can do for your own sake.

Well, I have a 986.1 S manual. It's not exactly standard... The previous owner gave it a GAHH hood with a heated glass window, 18" Turbo II replica wheels, and an air induction upgrade (conical air filter, 74mm throttle body, IPD plenum, and a remap). I added Zunsport mesh grilles, Goodridge braided brake hoses, FunctionFirst Shift-Right shifter yoke and bearings, did the ceramic IMS bearing upgrade and completely refreshed the suspension, opting for Koni SA dampers and Eibach 2-way adjustable ARBs, on OEM bushes. I also installed a Continental head unit and I always run Michelin PS tires (they're due for replacement soon. Can't wait to try the new PS5s!). I don't know if the Dansk sausage would drone or not, so personally I think I might go for a switchable muffler bypass instead (I am rather jealous of the sound a mate's 987.1 S makes). And who knows, if I can afford it and they're still in business, when the time comes for an engine rebuild I dream of doing the Hartech 3.7 litre upgrade. But that's probably a decade into the future...

@dylanbiggelaar2430

Жыл бұрын

I have the Spyder performance valves on mine.

Hopefully will be getting a Boxster S or 996 c2 but will be an automatic. Keep coming with the advice please 👍

@9WERKSTV

Жыл бұрын

Cheers Nick, nice choice for you to have.

Stripout for weight reduction??? Like we are going to compete in some form of Motorsport

I just got my first Porsche

Having bought my first Porsche last Friday....this is great timing. It's a first gen 3.2, loving it so far but it is far too quiet!

@9WERKSTV

Жыл бұрын

Fantastic, you've many fun miles ahead I am sure!

@eblevinda

Жыл бұрын

I've had my boxster for 8 years now, some simple mods will improve the sound no end, fit a performance air filter, I have an K&N filter, do the de-snorkle (google it), those two alone will make the car sound better, when ready get a exhaust by-pass mod done (again google it) - that is the best best sound mod for the 986, finally you can fit stainless steel exhaust manifolds. I've also fitted a modified air intake with a with a 911 C4 throttle body and plenum, anyway, this is what it sounds like for comparison - kzread.info/dash/bejne/oqSOxcSPcafLl7A.html

@SpencerF6

Жыл бұрын

@@eblevindaI appreciate the tips! I've desnorkelled it on Saturday but couldn't really hear much of a difference if any. The exhaust is the next mod I thought of and had a replacement backbox in mind. I may go down the bypass route as you suggested instead. 👍

Very interesting. I have subscribed and I couldn't agree more about tyres (and brakes). I have fitted my 2.7 986 with Toyo Proxes Sport. 255 on the back as I have the wider wheels, and 205 on the front. All four tyres cost £335 delivered two years ago, although I had to get them fitted locally. They are fantastic.

How much was the middle cat ?

How about doing one for the 987.2 boxster ? The mrs boxster could do with pepping up in the sound department

@9WERKSTV

Жыл бұрын

Very happy to look at that!

@Carrera-gp9od

Жыл бұрын

Cheers mate 😂

Do you think these upgrades are cost affective with the abysmal prices of Boxsters at the moment, I used to own a 911 SC some years ago I much prefer the Boxster to drive but as far as recouping your money back I wished I’d had kept the 911.

@MattiusMaximus

Жыл бұрын

Probably not, I mean classic sports cars go up in value after a while, but most aren’t doing crazy growth like classic 911’s. My 986 has about £40k worth of mods and I don’t expect that money to ever be seen again, but I also have a very special Boxster, using many GT3 parts, which can keep up with 996 GT3’s on track but for a lot less money. Most importantly I love how custom it is. Spend the money if your car is a keeper, but if you don’t want to spend the money then your car isn’t a keeper. Maybe, as good as your Boxster is, it may be time for you to get something different.

Which years are the ones without the IMS issue?

@akihori

11 ай бұрын

986-996 and even the 987 caymans/boxsters all have that ims issue

@BeauJohnson247

6 ай бұрын

@@akihori Not true, Pre 2000 Built cars had the double row IMS bearing and were under a 1% failure rate... Mid 2000 they moved to the small single row bearing that had the 8% chance

@akihori

6 ай бұрын

@@BeauJohnson247 even though it did have the dual IMS there was still a chance of failure, yes very low but indeed still a chance of failure. Also need to clarify my previous response that the 987.2 caymans/boxsters from 2009 and later never had IMS bearings so the problem is completely out of the question for those models

@BeauJohnson247

6 ай бұрын

@@akihori well you are wrong again, ever porsche in history has an IMS bearing, but they have a standard thrust bearing not a ball bearing type bearing… stop trying to be a bad news bear… everything can fail, essentially the pre 2000 cars are such a rare failure it’s not worth talking about, being worried about pre 2000 cars is like worrying about being struck by lightning, sure it happens, but I’m not walking around looking at the sky…

@akihori

6 ай бұрын

@@BeauJohnson247 good to know and well im not trying to be a “bad news bear” lmao 🤣 just stating that the pre 2000s cars still were somewhat affected but i get what your trying to say im just piecing things from when i ised to own a 986S a long time ago mixed with fb group answers but guess we were all wrong

Like.