Reuploaded due to music copyright issues, new video coming out in a few days linktr.ee/Oxide_does
Жүктеу.....
Пікірлер: 267
@maelradec7897 Жыл бұрын
Damn bro sorry to hear about the copyclaim.
@Oxide_does_his_best
Жыл бұрын
Its a copyright viewing block too, I'm demonetized as it is so an actual block is rare exceptionally annoying.
@maelradec7897
Жыл бұрын
@@Oxide_does_his_best woof sounds really shitty man, hope it clears up soon because you really deserve to get paid for this.
@randomyoutubecommentersecu7639
Жыл бұрын
@@Oxide_does_his_best youtube is so retarded...what reason did they provide after abusing that dumb copyright claim system of youtube?
@slavunion6251
Жыл бұрын
@@Oxide_does_his_best how did you get the Armour?
@zemperus1639 Жыл бұрын
I'm relatively new to the ballistics world, but I aspire to be a projectile engineer later in life. If you ever get a hold of more armor, I'd love to see the proficiency of 9x19mm DM91 *if* you can get a hold of it. Your videos are humble but I see massive insight of real tests of ballistic properties of these cartridges, and I thank you for saving me massive amounts of searching to see what would survive in the long run.
@Oxide_does_his_best
Жыл бұрын
Tungsten pistol rounds are interesting. I will try. I think you will find that if you face someone with tungsten ammo, you have larger problems
@zemperus1639
Жыл бұрын
@@Oxide_does_his_best Especially pistol rounds. Not like they're punching through GOST5/6 or NIJ3/4 at 200m. You most certainly have bigger problems stacking up or sneaking in.
@Oxide_does_his_best
Жыл бұрын
@@zemperus1639 I highly doubt DM91 could penetrate Gost 5 or NIJ 4. It might struggle even against NIJ 3
@botwally2954
Жыл бұрын
@@Oxide_does_his_bestI think Buffman did a test on DM91 and it went through a lvl 3 PE plate. Probably no chance against ceramic plates though.
@AlexNV75
Жыл бұрын
If u like videos like this I have an organized playlist for all to enjoy 👍🏽
@panmag4756 Жыл бұрын
Avarage guntuber: You know it is impossible to get the new 6,8mm military round, so today we will be shooting the comercial version thats for training. Meanwhile Oxide: Behold!
@Oxide_does_his_best
Жыл бұрын
I have not gotten the 6.8 round, however the 308 rounds hit just as hard if not harder.
@panmag4756
Жыл бұрын
@@Oxide_does_his_best Thats not you holding it at 4:20? Anyway, great vid, loved it.
@Oxide_does_his_best
Жыл бұрын
@@panmag4756 That isn't an AP version of the adopted round.
@rockagamez7704
Жыл бұрын
what are you talking about? sure the vid was just a quick showcase vid, but it's legit. M993 is not a joke of a round
@deafenziv3596
Жыл бұрын
@@Oxide_does_his_best speaking of, as a solider what is your view on the NGSW and the new round?
@nvgboiyes6386 Жыл бұрын
I appreciate that you are keeping up despite KZread kicking you down like that. I am looking forward to your new videos and your projects in the future.
@qwe304 Жыл бұрын
The new 6.8 special purpose round is basically a tungsten m855a1-esq design. We don't have core weight yet, but it will likely have marginally better velocity, but worse sectional density.
@Oxide_does_his_best
Жыл бұрын
Very cool. Are there white papers on this round somewhere?
@BuffRANGE
Жыл бұрын
@@Oxide_does_his_best I recall most of the pre selection testing data is all we have to go off of, and it's all NDA shit, but claimed NIJ level IV at 100 M+.
@mikeybroyo6230 Жыл бұрын
How you manage to get these plates and ammo is beyond me but I certainly appreciate your hard work and dedication to ballistics. EFT got me into this fascinating stuff and you are the only guy who does this stuff and does it fantastically, always looking forward to your videos!
@homijbhabha8860
Жыл бұрын
There are discord servers of traders, enthusiasts, many gun youtubers are on these servers
@kevinyoung9243
Жыл бұрын
corrupt Russian supply officers and other such types take it from the depot and sell it on the grey market until it makes its way to the us
@burhanbudak6041
Жыл бұрын
Thankfully Russia is very corrupt.
@tiaanwest4905 Жыл бұрын
Just recently found your channel. I really love the content. Keep up the good work brother. Much love from South Africa.
@borkwoof696 Жыл бұрын
Now I wonder how the tungsten 6.8x51 would fare against this. Edit: Bruh, should have just waited🤦♂️
@Oxide_does_his_best
Жыл бұрын
I AM THE GREATEST
@sodinc
Жыл бұрын
@@Oxide_does_his_best yes, obviously
@backseatswitchyy Жыл бұрын
What a cool opportunity to be able to get your hands on products like this!
@wagonlee5443 Жыл бұрын
Pilotredsun music? Oxide your taste is immaculate. Love the intro as well! It was Studio Gherila's work I assume?
@MRopinion3 Жыл бұрын
Thank you for reuploading this. I have forwarded this video to many people when taking about the Army's new NGSW.
@keionbradley4254 Жыл бұрын
Yo! Im new here, literally got your vid this morning. Good to see some honest testing from a fellow service member. Did you get these plates from UARM?
@mathewb7076 Жыл бұрын
Dude, might be a dumb question, but since you're in the Army do they look at your content and the research you're doing? I feel that this research is pretty valuable for soldiers and they should commend you for doing this on your own time and money.
@peterslaby9782
Жыл бұрын
It’s likely the DOD has full assessments of the capabilities of nearly all the kit carried by Russians, Chinese, and any other possible peer adversary. But they ain’t gonna share it on KZread like ya boi Oxide.
@Oxide_does_his_best
Жыл бұрын
If they ask me to make a PowerPoint I will
@owllymannstein7113
Жыл бұрын
That isn't how the pentagon works, they're only interested if the project costs millions in tax payer dollars.
@chost-059
Жыл бұрын
@@peterslaby9782 yeah its bot hard for the governments to aquire near peer equipment, the british straight up bought a handfull of T-80U tanks for evaluation in the 90's iirc
@burhanbudak6041
Жыл бұрын
@@Oxide_does_his_best perun does and its good content. Maybe looking up whats used in Ukraine.
@caidynwastaken Жыл бұрын
Atleast I have something to rewatch while I wait for the next video 😔
@midoriiyahebi3535 Жыл бұрын
The hexagonal silicon-carbide stuff inside the ballistic plate happens to remind me of the infamous Dragonskin plate carrier that was once gonna be issued to the US military but failed due to the heat separating the ceramic disks, not performing how it was supposed to be.
@Sterlingh8ter Жыл бұрын
Excellent video, shoutout to Buffman also!
@jasonjavelin Жыл бұрын
More amazing data and content. POG intro
@Samu-qx7mj23 күн бұрын
I am happy u got a sponsor :)
@josedorsaith5261 Жыл бұрын
Loving that new intro. Is that the wound ballistics for the 55gr M913?
@wardengage4173 Жыл бұрын
I'll gladly watch again
@Pulkz Жыл бұрын
Thank you Sir
@Shoelaces77 Жыл бұрын
that sucks, but I am glad to know you be uploading soon
@drdock Жыл бұрын
time to watch this video in .25 to increase watch time and so that the video gets recommended to more people.
@basicallyanelephant2673 Жыл бұрын
Cool intro! You should use it for your next videos.
@NL22356 Жыл бұрын
yo thanks for all the research
@winterautumnfishing5215 Жыл бұрын
Oxide, AKA, Extremely classified foreign military equipment guy
@DarkestVampire92 Жыл бұрын
Here's hoping you'll be able to test 6.8x51mm soon. Even if this armor can stop it, i doubt many others can.
@vincentsilva5663 Жыл бұрын
Interesting test awesome video
@mcantu197 Жыл бұрын
Have you considered taking some shots at more likely engagement distances, like 100m+?
@gabrielchatwin7459 Жыл бұрын
Great video dude
@mrmert5854 Жыл бұрын
Great video!
@johnhighway7399 Жыл бұрын
Meanwhile in Tarkov: M993 ignores GOST 6 plates as if you weren't even wearing anything
@hopedream11
Жыл бұрын
Ehhh it takes a few rounds to kill you usually. Most plates are designed for 3 to 4 shots sometimes more depending on plate design. But if in the same area, will likely pen inn2 to 3. If it's AP? definitely penning. Of course it also depends on what's behind the plates too.
@chrismccloy9824 Жыл бұрын
The shape of those ceramic pieces look like that dragon skin armor that came out some years ago. Speaking of which, am I the only one who remembers that stuff? I haven't heard anything about or seen anything about it since it was featured on future weapons.
@MrMattydavee
Жыл бұрын
Because it sucked.
@franklingomez5311 Жыл бұрын
Prince rupert drops would be a huge upgrade over ceramic tiles if they could be produced without a tail end. The combination of internal stresses exerting force outwards, the external stresses exterting forces inwards, and the spherical geometry of a prince rupert drop basically make them indestructible. I've seen a few videos where prince rupert drops are quenched in liquid nitrogen. It has the effect of making PRD's that don't shatter when the tail end is broken. These beads are so tough that they have no trouble shattering a 7.62mm projectile thats fired at them. If I could produce small quenched glass beads without a tail end and locked them into epoxy to make up the first layer of a ballistic vest do you think it could out perform ceramic tiles?
@taskforceboi8977
16 күн бұрын
You are now legally mandated to create this body armor. Go forth.
@LeonSteelpaw Жыл бұрын
Intriguing video
@user-oy9zy4ds9m Жыл бұрын
Buffman tested some gnarly smkh tungsten 8mm Mauser. 194 grains ranging from 2800-nearly 3000 FPS. I’m betting that will defeat the plate where m993 failed
@jalpat2272
Жыл бұрын
What is this WWII, at this trajectory we would see 30-06 AR introduced as stopgap.
@knottynarwhal1321 Жыл бұрын
Hopefully you can try the new sig mcx spear on those types of plates.
@TotallyNotTimothyMcVeigh Жыл бұрын
"Worn by FSB, TSSN Spetznaz, or cat..."
@shadowninja8082 Жыл бұрын
that earrape at the end of the video 🤣
@drewswanson2701 Жыл бұрын
Armys adoption of the new 6.8 with its super high chamber pressure/velocity makes more sense basically they wanted something that can beat this armor and at range seeming 308 can’t, that’s at least my guess
@AlexsEquipmentCorner Жыл бұрын
I give many thanks for actually fixing the issue! Sorry if i bothered you with it
@Oxide_does_his_best
Жыл бұрын
Sorry that it took this long!
@AlexsEquipmentCorner
Жыл бұрын
@@Oxide_does_his_best Also small question, why did you cover the G with a Z on the sideplates? iirc the ASP-Zs were the Steel Sideplates of the Glad A and rare version of the Glad C
@Oxide_does_his_best
Жыл бұрын
@@AlexsEquipmentCorner I got them like that, they came with a set for a C. They’re ceramic though
@AlexsEquipmentCorner
Жыл бұрын
@@Oxide_does_his_best ah gotcha as they are the ceramics it is weird that they are labeled that way
@theman1563 Жыл бұрын
If love to see this armor against the new 6.8
@bleeve5450 Жыл бұрын
Do the plate carriers come with that amazing orange cat??
@Oxide_does_his_best
Жыл бұрын
Alan is not for sale
@cnlbenmc Жыл бұрын
0:34 hmm, *Nod and a Wink* Must have fallen off the back of a truck in Siberia...
@borkwoof696 Жыл бұрын
Love things that aren’t garbage
@saintsinningsword Жыл бұрын
Because of the camera focusing, it looked like the bullet entrance was blurred out at 2:40 like it was censored.
@Oxide_does_his_best
Жыл бұрын
The aramid off to the right? There is a serial number on it. Must be blurred
@saintsinningsword
Жыл бұрын
@@Oxide_does_his_best Sounds like bs, especially since you're not advertising or selling the plate. Unless you're protecting friends who smuggled the plates out and reported them missing. Then much respect King!
@AlexsEquipmentCorner
Жыл бұрын
@@saintsinningsword It is illegal to export these plates, ofc he is protecting the guy in the unit and the seller by not showing the serial number
@kentrudy860 Жыл бұрын
Can u do a video of the chinese armor in ur insta?
@someperson9895 Жыл бұрын
pilotredsun!! I LOVE pilotredsun!! holy fuck you're so based I love you Oxide!!!
@chrislucero5708 Жыл бұрын
? Would a super hot 22.250 go through if it had a pen core?
@andreasr6632 Жыл бұрын
Hello great video hope to see more from you! Is the carbon fiber formed around the plate all around? How thick is the carbon fiber sheet, the tiles and the backer?
@Oxide_does_his_best
Жыл бұрын
From memory, tiles 13mm, ~12mm backer. Fiber was wrapped around front of it and was less than 1mm.
@ThinkingOutLoud1.1 Жыл бұрын
Black tip 308 from 15 ft away ??? Alllllllrighttyyyyyyyyyy then……….
@Cuneiform3567 Жыл бұрын
Do you think that American Civillian armor doctrine or Russian armor doctrine is better? I like how lightweight we can go(IE: uhmwpe plates in a slick carrier type stuff.) But I also wonder when looking at both soviet and russian armor. Is the weight worth the protection you get from the pounds of kevlar behind the plates? Also thoughts on the iotv?
@Oxide_does_his_best
Жыл бұрын
I urge you to watch the next video as it responds to these question
@qwe304
Жыл бұрын
As far as I know, only the Navy is issuing all polyethylene plates, since they are buoyant. Every other Branch used conventional ceramic plates. In my opinion the almost total failure of polyethylene against any sort of hardened core (even 855) eliminates its possibility of mainstream use in the states.
@demon-yt9133 Жыл бұрын
You are perfect in you taste videos....... Not like other KZreadrs who hates other countries and make trash of their amours
@Bobaccino Жыл бұрын
Boxide Snoxide
@Butter_Warrior99 Жыл бұрын
On a serious note, I genuinely see why the US Army wanted the M5.
@fe1jo628
Жыл бұрын
And people are thinking M855A1 is going to be enough to penetrate those things at +300 yards.
@Butter_Warrior99
Жыл бұрын
@@fe1jo628, I said I can see why, not that it’ll be effective. Plus this would be in the hypothetical. However, if Oxide can get ahold of a Sig Spear. Then we’ll see.
@wallow4210
Жыл бұрын
@@fe1jo628 The M5 probably won't either. I don't really think it's expected for any small arms fire to penetrate plates; mounted weapons and grenades would be the real killer against a fully armed and protected force.
@fe1jo628
Жыл бұрын
@@wallow4210 100% has better chances at doing it tho. Plus, the way the M5 is built makes up for some really good ammo improvements that might include the 80k psi pressure the rifle is able to resist.
@blackknight5974 күн бұрын
I hope Oxide will be around in the future when hopefully sanctions are dropped and he can get Russian gear again. I know it won’t be anytime soon (or even to a don’t hold your breath level). I miss all the Spetsnaz gear loadouts. They were unbelievable!
@zezenkop412 Жыл бұрын
How do you make sure that what you get isn't replica ??
@nicolas8098
Жыл бұрын
Being able to ID it yourself , and reputable sellers if you don't know enough
@BFSarthur Жыл бұрын
This explains alot. What exactly? Idk
@DevildogDevildog-ko1ej Жыл бұрын
That standard issue plate carrier that the army issues is ass. Id get my own
@acceptablecasualty5319 Жыл бұрын
Seems like this Hexagonal Arrangement of Material is ideal for multi-hit resistance, something that conventional plate armor seems to struggle with greatly.
@THEGRAYFOXX00 Жыл бұрын
very humbling i do say so myslef...my combination of plate choice is only good for 30'06 AP but tungsten? i dont think my plates are up for the task
@heisenburger32 Жыл бұрын
hello
@chugachuga9242 Жыл бұрын
What’s up with the blurred bit at 2:42
@Oxide_does_his_best
Жыл бұрын
Serials
@BlackBladeGroM Жыл бұрын
When Ukraine is over, you should get some commercial stuff by ATLAS and test it. They make UHMWPE+carbide plates rated Br3+ through Br6 (yes really) and these are widely used by volunteers, PMCs and some high-speed operators who can afford to entertain personal preferences. They also make helmets rated Br2+ and known to deflect AK rounds at an angle.
@BuffRANGE
Жыл бұрын
BR6 you say. Can little people of the US buy from them?
@Oxide_does_his_best
Жыл бұрын
ATLAS do not like me because I am Pro Ukraine. You should buy me some honestly.
@ChickEd1
Жыл бұрын
@@Oxide_does_his_best Ну так хорош топить за украину, и тогда АТЛАС тебя полюбит :D Вообще, не много вы теряете, атлас не делает никаких шлемов, они их из Китая возят, так что нет там чуда никакого. Смотреть надо на последние шлема от НПП КЛаСС, из СВМПЭ, хотя ТОР из СВМПЭ и в России днем с огнем не сыщешь, но вот они уже действительно уровень.
@coreytena2
Жыл бұрын
I can’t even find that company online. Got a link?
@thr0waway
Жыл бұрын
@@Oxide_does_his_best If you educated yourself more on the geopolitics behind the crisis you would not be so pro-Ukraine. If only you put in as much effort into researching the origins of the conflict as you do with these amazing videos!
@AlexNV75 Жыл бұрын
If you enjoy body armor tests like I do, I have an organized playlist including oxide, mrgunsngear, demoranch, and more. 👍🏽
@nixonvanegas8715
Жыл бұрын
Thanks for the playlist bro
@Loonius- Жыл бұрын
Rip
@prohypeman Жыл бұрын
i like the gym milk, you have to shock the body!
@oim8254 Жыл бұрын
Oxide can you test the XSAPI plate? If I'm not mistaken, XSAPI is rated to resist M993 AP. I wonder how common is XSAPI within the US army?
@BuffRANGE
Жыл бұрын
Supposedly (could be propaganda) all XSAPIs are in a warehouse somewhere collecting dust because whatever perceived threat they were designed for, never appear in the field. But yet they appear to sale, and some will be tested :)
@oim8254
Жыл бұрын
@@BuffRANGE Dude, huge fan of your channel. Your armour testing videos are some of the most methodical out there. Any chance that you will be testing the XSAPI? Even better, how about the Tencate LIBA plate? 😳
@Oxide_does_his_best
Жыл бұрын
I saw XSAPIs in basic training. They’re all very old but prolific. Buffman is going to test an Xsapi but they’ll appear on my channel too
@samuelcouvin7206 Жыл бұрын
Got terminated ?
@sacv6788 Жыл бұрын
speaking of UARM they a number of different lv4 plates but dont distinguish the functional differences between them. are there plans to make a video discussing them side by side
@qwe304
Жыл бұрын
I would stay away from uarm personally, their lv 3 plates have a concerning amount of BFD.
@Butter_Warrior99 Жыл бұрын
Wonder how effective it is against high explosive constructive criticism. -Russian Badger enjoyer.
@andycraig6905 Жыл бұрын
What do you think about the claim that the 6.8x51 AP round will be able to go through modern level 4 armor at lower velocities or extended ranges?
@Oxide_does_his_best
Жыл бұрын
I highly doubt it, but I need to test the round
@andycraig6905
Жыл бұрын
@@Oxide_does_his_best me too. I heard that they've got some sort of projectile that doesn't need as much velocity but it sounds like smoke and mirrors. Also if they knock through level 4 then I'm pretty sure we'll just make armor stronger.
@somerandommen
Жыл бұрын
Consider his footage, he's got some 6.8 TVCM and not 6.8 Fury. The claims are about 6.8 Fury's capabilities, not 6.8 TVCM. He can't even do a proper test.
@Oxide_does_his_best
Жыл бұрын
@@somerandommen I can definitely do a proper test 😎👍 just give me a minute
@somerandommen
Жыл бұрын
@@Oxide_does_his_best Ok pog
@jacobwilliams9427 Жыл бұрын
they wont live long enough to use it in a war lol
@TBRACKET Жыл бұрын
Copyclaim? What copyclaim?
@hunterjager9538 Жыл бұрын
Yes you can get a hotter and stronger and better round. GERMAN 8mm smkh. Ask buff for some. Im sure he will hook you up.
@lolo-om9rs Жыл бұрын
Please I beg you get the 9x39m ap vs esapi video done fast
@Oxide_does_his_best
Жыл бұрын
Be like two days or sooner
@TurtleStranger Жыл бұрын
CAT
@drewskizloty9068 Жыл бұрын
You should try to get your hands on one of those magical BR6 rated armor things.
@Oxide_does_his_best
Жыл бұрын
Those are for vehicles usually
@drewskizloty9068
Жыл бұрын
@@Oxide_does_his_best Ah alright, I thought there was some sort of body armor able to withstand the russian 12.7 round
@ChickEd1
Жыл бұрын
@@Oxide_does_his_best Не совсем так, БР6 выделяется только для штурмовых подразделений, эта штука не для всех, лично у меня комплект был БР6, таскал в AVS
@LuisC7 Жыл бұрын
Damnnn you're not that big of a channel yet and you buy so many expensive toys for us xD. How much did this endeavor cost you? Before the sanctions it was hard, now... You're super man after eing able to buy these. Cool tech though, but i wouldn't trust my life on the spaces between the hexagonal ceramic plates. Weak spot there
@samuelcouvin7206 Жыл бұрын
No outro ?
@Oxide_does_his_best
Жыл бұрын
Had to remove it
@samuelcouvin7206
Жыл бұрын
@@Oxide_does_his_best it was the music huh ? Thought you gave up on monetization
@Oxide_does_his_best
Жыл бұрын
@@samuelcouvin7206 Its a visibility block, has nothing to do with monetization. I didn't give up on monetization, it was sized from me. I can't restore it.
@samuelcouvin7206
Жыл бұрын
@@Oxide_does_his_best wow yt sucks sorry for you man
@soap_eater Жыл бұрын
Seems like the "Dragon Skin" armor but actually done right
@BuffRANGE
Жыл бұрын
Dragon Skin's tiles were circular and over lapped each other :D
@fuzzybloodpc9291 Жыл бұрын
Why was it censored? 3:15
@Oxide_does_his_best
Жыл бұрын
Serial number
@fuzzybloodpc9291
Жыл бұрын
@@Oxide_does_his_best Ah okay
@aron7439 Жыл бұрын
🇷🇺🎖
@acceptablecasualty5319 Жыл бұрын
Fort seems to be one of the least "compromised" Russian Companies out there. Good product!
@user-hi7rc2px7d Жыл бұрын
老哥什么时候出我们新盔的视频,催更新了
@rozkaz661 Жыл бұрын
Looks like the russians can make equipment that isnt disapointing when its in limited production for truly elite units
@sata1938
Жыл бұрын
And then the truly elite units get dropped off in the Black Sea to denazify the fish and retake the Moskva lmfao
@TheRifild
Жыл бұрын
@@sata1938 any Video/photo evidence?
@dipjyotitalukdar9598
Жыл бұрын
@@sata1938 Not before capturing some pindo mercenaries.
@fast_play9853 ай бұрын
Я открою величайшую тайну российской армии, в ней нет таких подразделений как "Спецназ"
@Fred_the_1996
3 ай бұрын
??????
@waty0usay1 Жыл бұрын
Yeah...surely Ruzzia has money to produce these for special forces, they don't even have money to give basic helmets to all soldiers or hand everyone an ak-74.
@Oxide_does_his_best
Жыл бұрын
Fun fact, if Special Forces soldiers of Russia can be proven to have been killed in action without using their armor, their families don't get life insurance payouts
@waty0usay1
Жыл бұрын
@@Oxide_does_his_best the only insurance their families get is a bag of food and some vodka, that's how down bad ruzzia is.
@ryssa2409
Жыл бұрын
@@Oxide_does_his_best proofs?
@Oxide_does_his_best
Жыл бұрын
@@ryssa2409 proofa doodle dooooo!
@ryssa2409
Жыл бұрын
@@Oxide_does_his_best so no proofs gotcha )))0)
@jackseaward2330 Жыл бұрын
No joke let out an audible gasp when I saw it stop M993....does the US or NATO nations have any armour even close to this?
@Chiboza
Жыл бұрын
Yes, NATO armor is even better
@Oxide_does_his_best
Жыл бұрын
Depends on the plate. Some can and some can't stop 993 under the same conditions
@qwe304
Жыл бұрын
The US made a similarly capable plate back in the early 2000s, as a response to the threat of russian tungsten core ammo in iraq, however they were a bit heavier than the standard issue ones, and the threat never materialized, so they were never fielded in a large scale, however tens of thousands were made. While they have a worse multi-hit performance than this tile array plate, they can also stop m993.
@EliWritesStories Жыл бұрын
ok but what about one more vdv drop
@Oxide_does_his_best
Жыл бұрын
I honestly have still not seen evidence of a paradrop yet
@EliWritesStories
Жыл бұрын
@@Oxide_does_his_best did they have fortnite loot crates in them
@buckeyeman98 Жыл бұрын
lmao hasn't helped them much though
@KinoTechUSA69 Жыл бұрын
God bless Russian logistical corruption. Russian soldiers in the field with bare AK-74's yet online the wide range of current issue russian optics and gear is still for sale in USD.
@danieljohnson1053 Жыл бұрын
Tangentially related, but with level 3-4 plates becoming standard issue among western forces, and the Russian military possessing a variety of high level protection plates, how much of this body armor is making its way down to the boots-on-the-ground infantry? (instead of being sold off by Misha for extra vodka rubles)
@rozkaz661
Жыл бұрын
Hard to give percentage but from ukraine it seems it greatly depends on the unit. Some mishas are more vodka hungry then others. there were reports of some guy ariving at tge front only to be handed very old plate carriers and plates that stunk of death but hard to say exactly how big of a problem it is
@KeksimusMaximus
Жыл бұрын
This kind of armor for regular army? Never. Only for high-tier special units (for what you consider "police" mostly, not even army). Source: am russian, served in a ГРУ spetsnaz unit
@AlexsEquipmentCorner
Жыл бұрын
Gladiators and Goplits are never issued to infantry, teh granits are pretty common tho and aren't bad
@XKS99
Жыл бұрын
I heard French 155mm CAESARs go for 120k USD in Ukraine
@ryssa2409
Жыл бұрын
Oldest carrier i've seen on a Russian unit was 6b23 on some tiktok with logi drivers VDV/Marines seem to have 6b43s and Rosgvardia has anything from Korund vests to custom plate carriers like Pantsir SSO with granit plates I think standart issue plates are granits which are 5a (somewhere between IV and III)
@botwally2954 Жыл бұрын
I wonder how the PLA plates compare to these. These are special forces only whereas the PLA's plates are standard issue, I think they acquired 1.2 million units in 2020. Time to testify the NGSW program.
@qwe304
Жыл бұрын
Every parade video I've seen has them marching around in empty carriers
@botwally2954
Жыл бұрын
@@qwe304 The 1.4 million unit procurement was publicly announced, so I don't think it is fake. The reason they don't wear them regularly might be due to the fact that ceramic plates are very prone to damage, and they are quite expensive, especially with silicon carbide or boron carbide plates.
@qwe304
Жыл бұрын
@@botwally2954 yes, and the Russians also planed to procure 2,300 t-14 armata tanks. They ended up with 20. And given the performance of imported Chinese armor so far, I'm not expecting much.
@milosterzic6452 Жыл бұрын
Do you like russia or only their special forces?
@CobraMustang Жыл бұрын
So your saying the adoption 6.8x51 fairly pointless and M855A1 works just the same after multiple shots. So, I'll keep my 5.56 with low recoil and hit the tap button until the Commie falls down.
@Oxide_does_his_best
Жыл бұрын
6.8 has other benefits. I won’t know how good the ap is till I test it
@somerandommen
Жыл бұрын
"until the Commie falls down."... LARP.
@TheLordhorationelson Жыл бұрын
Slava Z!
@googleevil Жыл бұрын
This plates were produced in Ukraine. Now Russians experience huge problems with the plates and trying to use regular steel as an replacement.
@emperorpalpatine1469
Жыл бұрын
Source???
@bomjahed
Жыл бұрын
@@emperorpalpatine1469 Gost of kiev lmao
@VASILLEVSKI1878
Жыл бұрын
Since February 24th 2022, everything made in Russia is actually MADE IN UKRAINE!! Bet you didn't know that, but it's true. Ukraine owns Russia and Russia simply doesn't exist because everything there was automatically turned into Ukraine. Shocking news!!!!!
@D.Trout222 Жыл бұрын
(FOR THE LOVE OF GOD DO THE XSAPI !!!!!!!!!!!!
@Oxide_does_his_best
Жыл бұрын
Yes
@qwe304
Жыл бұрын
Buffman will do one too soon
@Hijackerrr Жыл бұрын
cutting edge of year 2000...
@Oxide_does_his_best
Жыл бұрын
I bet you there were no plates that could stop tungsten available for infantry anywhere in the world in 2000
@Hijackerrr
Жыл бұрын
@@Oxide_does_his_best you are not showing infantry body armor as far as i know
@Oxide_does_his_best
Жыл бұрын
@@Hijackerrr what’s a special forces plate that could do it back then?
Пікірлер: 267
Damn bro sorry to hear about the copyclaim.
@Oxide_does_his_best
Жыл бұрын
Its a copyright viewing block too, I'm demonetized as it is so an actual block is rare exceptionally annoying.
@maelradec7897
Жыл бұрын
@@Oxide_does_his_best woof sounds really shitty man, hope it clears up soon because you really deserve to get paid for this.
@randomyoutubecommentersecu7639
Жыл бұрын
@@Oxide_does_his_best youtube is so retarded...what reason did they provide after abusing that dumb copyright claim system of youtube?
@slavunion6251
Жыл бұрын
@@Oxide_does_his_best how did you get the Armour?
I'm relatively new to the ballistics world, but I aspire to be a projectile engineer later in life. If you ever get a hold of more armor, I'd love to see the proficiency of 9x19mm DM91 *if* you can get a hold of it. Your videos are humble but I see massive insight of real tests of ballistic properties of these cartridges, and I thank you for saving me massive amounts of searching to see what would survive in the long run.
@Oxide_does_his_best
Жыл бұрын
Tungsten pistol rounds are interesting. I will try. I think you will find that if you face someone with tungsten ammo, you have larger problems
@zemperus1639
Жыл бұрын
@@Oxide_does_his_best Especially pistol rounds. Not like they're punching through GOST5/6 or NIJ3/4 at 200m. You most certainly have bigger problems stacking up or sneaking in.
@Oxide_does_his_best
Жыл бұрын
@@zemperus1639 I highly doubt DM91 could penetrate Gost 5 or NIJ 4. It might struggle even against NIJ 3
@botwally2954
Жыл бұрын
@@Oxide_does_his_bestI think Buffman did a test on DM91 and it went through a lvl 3 PE plate. Probably no chance against ceramic plates though.
@AlexNV75
Жыл бұрын
If u like videos like this I have an organized playlist for all to enjoy 👍🏽
Avarage guntuber: You know it is impossible to get the new 6,8mm military round, so today we will be shooting the comercial version thats for training. Meanwhile Oxide: Behold!
@Oxide_does_his_best
Жыл бұрын
I have not gotten the 6.8 round, however the 308 rounds hit just as hard if not harder.
@panmag4756
Жыл бұрын
@@Oxide_does_his_best Thats not you holding it at 4:20? Anyway, great vid, loved it.
@Oxide_does_his_best
Жыл бұрын
@@panmag4756 That isn't an AP version of the adopted round.
@rockagamez7704
Жыл бұрын
what are you talking about? sure the vid was just a quick showcase vid, but it's legit. M993 is not a joke of a round
@deafenziv3596
Жыл бұрын
@@Oxide_does_his_best speaking of, as a solider what is your view on the NGSW and the new round?
I appreciate that you are keeping up despite KZread kicking you down like that. I am looking forward to your new videos and your projects in the future.
The new 6.8 special purpose round is basically a tungsten m855a1-esq design. We don't have core weight yet, but it will likely have marginally better velocity, but worse sectional density.
@Oxide_does_his_best
Жыл бұрын
Very cool. Are there white papers on this round somewhere?
@BuffRANGE
Жыл бұрын
@@Oxide_does_his_best I recall most of the pre selection testing data is all we have to go off of, and it's all NDA shit, but claimed NIJ level IV at 100 M+.
How you manage to get these plates and ammo is beyond me but I certainly appreciate your hard work and dedication to ballistics. EFT got me into this fascinating stuff and you are the only guy who does this stuff and does it fantastically, always looking forward to your videos!
@homijbhabha8860
Жыл бұрын
There are discord servers of traders, enthusiasts, many gun youtubers are on these servers
@kevinyoung9243
Жыл бұрын
corrupt Russian supply officers and other such types take it from the depot and sell it on the grey market until it makes its way to the us
@burhanbudak6041
Жыл бұрын
Thankfully Russia is very corrupt.
Just recently found your channel. I really love the content. Keep up the good work brother. Much love from South Africa.
Now I wonder how the tungsten 6.8x51 would fare against this. Edit: Bruh, should have just waited🤦♂️
@Oxide_does_his_best
Жыл бұрын
I AM THE GREATEST
@sodinc
Жыл бұрын
@@Oxide_does_his_best yes, obviously
What a cool opportunity to be able to get your hands on products like this!
Pilotredsun music? Oxide your taste is immaculate. Love the intro as well! It was Studio Gherila's work I assume?
Thank you for reuploading this. I have forwarded this video to many people when taking about the Army's new NGSW.
Yo! Im new here, literally got your vid this morning. Good to see some honest testing from a fellow service member. Did you get these plates from UARM?
Dude, might be a dumb question, but since you're in the Army do they look at your content and the research you're doing? I feel that this research is pretty valuable for soldiers and they should commend you for doing this on your own time and money.
@peterslaby9782
Жыл бұрын
It’s likely the DOD has full assessments of the capabilities of nearly all the kit carried by Russians, Chinese, and any other possible peer adversary. But they ain’t gonna share it on KZread like ya boi Oxide.
@Oxide_does_his_best
Жыл бұрын
If they ask me to make a PowerPoint I will
@owllymannstein7113
Жыл бұрын
That isn't how the pentagon works, they're only interested if the project costs millions in tax payer dollars.
@chost-059
Жыл бұрын
@@peterslaby9782 yeah its bot hard for the governments to aquire near peer equipment, the british straight up bought a handfull of T-80U tanks for evaluation in the 90's iirc
@burhanbudak6041
Жыл бұрын
@@Oxide_does_his_best perun does and its good content. Maybe looking up whats used in Ukraine.
Atleast I have something to rewatch while I wait for the next video 😔
The hexagonal silicon-carbide stuff inside the ballistic plate happens to remind me of the infamous Dragonskin plate carrier that was once gonna be issued to the US military but failed due to the heat separating the ceramic disks, not performing how it was supposed to be.
Excellent video, shoutout to Buffman also!
More amazing data and content. POG intro
I am happy u got a sponsor :)
Loving that new intro. Is that the wound ballistics for the 55gr M913?
I'll gladly watch again
Thank you Sir
that sucks, but I am glad to know you be uploading soon
time to watch this video in .25 to increase watch time and so that the video gets recommended to more people.
Cool intro! You should use it for your next videos.
yo thanks for all the research
Oxide, AKA, Extremely classified foreign military equipment guy
Here's hoping you'll be able to test 6.8x51mm soon. Even if this armor can stop it, i doubt many others can.
Interesting test awesome video
Have you considered taking some shots at more likely engagement distances, like 100m+?
Great video dude
Great video!
Meanwhile in Tarkov: M993 ignores GOST 6 plates as if you weren't even wearing anything
@hopedream11
Жыл бұрын
Ehhh it takes a few rounds to kill you usually. Most plates are designed for 3 to 4 shots sometimes more depending on plate design. But if in the same area, will likely pen inn2 to 3. If it's AP? definitely penning. Of course it also depends on what's behind the plates too.
The shape of those ceramic pieces look like that dragon skin armor that came out some years ago. Speaking of which, am I the only one who remembers that stuff? I haven't heard anything about or seen anything about it since it was featured on future weapons.
@MrMattydavee
Жыл бұрын
Because it sucked.
Prince rupert drops would be a huge upgrade over ceramic tiles if they could be produced without a tail end. The combination of internal stresses exerting force outwards, the external stresses exterting forces inwards, and the spherical geometry of a prince rupert drop basically make them indestructible. I've seen a few videos where prince rupert drops are quenched in liquid nitrogen. It has the effect of making PRD's that don't shatter when the tail end is broken. These beads are so tough that they have no trouble shattering a 7.62mm projectile thats fired at them. If I could produce small quenched glass beads without a tail end and locked them into epoxy to make up the first layer of a ballistic vest do you think it could out perform ceramic tiles?
@taskforceboi8977
16 күн бұрын
You are now legally mandated to create this body armor. Go forth.
Intriguing video
Buffman tested some gnarly smkh tungsten 8mm Mauser. 194 grains ranging from 2800-nearly 3000 FPS. I’m betting that will defeat the plate where m993 failed
@jalpat2272
Жыл бұрын
What is this WWII, at this trajectory we would see 30-06 AR introduced as stopgap.
Hopefully you can try the new sig mcx spear on those types of plates.
"Worn by FSB, TSSN Spetznaz, or cat..."
that earrape at the end of the video 🤣
Armys adoption of the new 6.8 with its super high chamber pressure/velocity makes more sense basically they wanted something that can beat this armor and at range seeming 308 can’t, that’s at least my guess
I give many thanks for actually fixing the issue! Sorry if i bothered you with it
@Oxide_does_his_best
Жыл бұрын
Sorry that it took this long!
@AlexsEquipmentCorner
Жыл бұрын
@@Oxide_does_his_best Also small question, why did you cover the G with a Z on the sideplates? iirc the ASP-Zs were the Steel Sideplates of the Glad A and rare version of the Glad C
@Oxide_does_his_best
Жыл бұрын
@@AlexsEquipmentCorner I got them like that, they came with a set for a C. They’re ceramic though
@AlexsEquipmentCorner
Жыл бұрын
@@Oxide_does_his_best ah gotcha as they are the ceramics it is weird that they are labeled that way
If love to see this armor against the new 6.8
Do the plate carriers come with that amazing orange cat??
@Oxide_does_his_best
Жыл бұрын
Alan is not for sale
0:34 hmm, *Nod and a Wink* Must have fallen off the back of a truck in Siberia...
Love things that aren’t garbage
Because of the camera focusing, it looked like the bullet entrance was blurred out at 2:40 like it was censored.
@Oxide_does_his_best
Жыл бұрын
The aramid off to the right? There is a serial number on it. Must be blurred
@saintsinningsword
Жыл бұрын
@@Oxide_does_his_best Sounds like bs, especially since you're not advertising or selling the plate. Unless you're protecting friends who smuggled the plates out and reported them missing. Then much respect King!
@AlexsEquipmentCorner
Жыл бұрын
@@saintsinningsword It is illegal to export these plates, ofc he is protecting the guy in the unit and the seller by not showing the serial number
Can u do a video of the chinese armor in ur insta?
pilotredsun!! I LOVE pilotredsun!! holy fuck you're so based I love you Oxide!!!
? Would a super hot 22.250 go through if it had a pen core?
Hello great video hope to see more from you! Is the carbon fiber formed around the plate all around? How thick is the carbon fiber sheet, the tiles and the backer?
@Oxide_does_his_best
Жыл бұрын
From memory, tiles 13mm, ~12mm backer. Fiber was wrapped around front of it and was less than 1mm.
Black tip 308 from 15 ft away ??? Alllllllrighttyyyyyyyyyy then……….
Do you think that American Civillian armor doctrine or Russian armor doctrine is better? I like how lightweight we can go(IE: uhmwpe plates in a slick carrier type stuff.) But I also wonder when looking at both soviet and russian armor. Is the weight worth the protection you get from the pounds of kevlar behind the plates? Also thoughts on the iotv?
@Oxide_does_his_best
Жыл бұрын
I urge you to watch the next video as it responds to these question
@qwe304
Жыл бұрын
As far as I know, only the Navy is issuing all polyethylene plates, since they are buoyant. Every other Branch used conventional ceramic plates. In my opinion the almost total failure of polyethylene against any sort of hardened core (even 855) eliminates its possibility of mainstream use in the states.
You are perfect in you taste videos....... Not like other KZreadrs who hates other countries and make trash of their amours
Boxide Snoxide
On a serious note, I genuinely see why the US Army wanted the M5.
@fe1jo628
Жыл бұрын
And people are thinking M855A1 is going to be enough to penetrate those things at +300 yards.
@Butter_Warrior99
Жыл бұрын
@@fe1jo628, I said I can see why, not that it’ll be effective. Plus this would be in the hypothetical. However, if Oxide can get ahold of a Sig Spear. Then we’ll see.
@wallow4210
Жыл бұрын
@@fe1jo628 The M5 probably won't either. I don't really think it's expected for any small arms fire to penetrate plates; mounted weapons and grenades would be the real killer against a fully armed and protected force.
@fe1jo628
Жыл бұрын
@@wallow4210 100% has better chances at doing it tho. Plus, the way the M5 is built makes up for some really good ammo improvements that might include the 80k psi pressure the rifle is able to resist.
I hope Oxide will be around in the future when hopefully sanctions are dropped and he can get Russian gear again. I know it won’t be anytime soon (or even to a don’t hold your breath level). I miss all the Spetsnaz gear loadouts. They were unbelievable!
How do you make sure that what you get isn't replica ??
@nicolas8098
Жыл бұрын
Being able to ID it yourself , and reputable sellers if you don't know enough
This explains alot. What exactly? Idk
That standard issue plate carrier that the army issues is ass. Id get my own
Seems like this Hexagonal Arrangement of Material is ideal for multi-hit resistance, something that conventional plate armor seems to struggle with greatly.
very humbling i do say so myslef...my combination of plate choice is only good for 30'06 AP but tungsten? i dont think my plates are up for the task
hello
What’s up with the blurred bit at 2:42
@Oxide_does_his_best
Жыл бұрын
Serials
When Ukraine is over, you should get some commercial stuff by ATLAS and test it. They make UHMWPE+carbide plates rated Br3+ through Br6 (yes really) and these are widely used by volunteers, PMCs and some high-speed operators who can afford to entertain personal preferences. They also make helmets rated Br2+ and known to deflect AK rounds at an angle.
@BuffRANGE
Жыл бұрын
BR6 you say. Can little people of the US buy from them?
@Oxide_does_his_best
Жыл бұрын
ATLAS do not like me because I am Pro Ukraine. You should buy me some honestly.
@ChickEd1
Жыл бұрын
@@Oxide_does_his_best Ну так хорош топить за украину, и тогда АТЛАС тебя полюбит :D Вообще, не много вы теряете, атлас не делает никаких шлемов, они их из Китая возят, так что нет там чуда никакого. Смотреть надо на последние шлема от НПП КЛаСС, из СВМПЭ, хотя ТОР из СВМПЭ и в России днем с огнем не сыщешь, но вот они уже действительно уровень.
@coreytena2
Жыл бұрын
I can’t even find that company online. Got a link?
@thr0waway
Жыл бұрын
@@Oxide_does_his_best If you educated yourself more on the geopolitics behind the crisis you would not be so pro-Ukraine. If only you put in as much effort into researching the origins of the conflict as you do with these amazing videos!
If you enjoy body armor tests like I do, I have an organized playlist including oxide, mrgunsngear, demoranch, and more. 👍🏽
@nixonvanegas8715
Жыл бұрын
Thanks for the playlist bro
Rip
i like the gym milk, you have to shock the body!
Oxide can you test the XSAPI plate? If I'm not mistaken, XSAPI is rated to resist M993 AP. I wonder how common is XSAPI within the US army?
@BuffRANGE
Жыл бұрын
Supposedly (could be propaganda) all XSAPIs are in a warehouse somewhere collecting dust because whatever perceived threat they were designed for, never appear in the field. But yet they appear to sale, and some will be tested :)
@oim8254
Жыл бұрын
@@BuffRANGE Dude, huge fan of your channel. Your armour testing videos are some of the most methodical out there. Any chance that you will be testing the XSAPI? Even better, how about the Tencate LIBA plate? 😳
@Oxide_does_his_best
Жыл бұрын
I saw XSAPIs in basic training. They’re all very old but prolific. Buffman is going to test an Xsapi but they’ll appear on my channel too
Got terminated ?
speaking of UARM they a number of different lv4 plates but dont distinguish the functional differences between them. are there plans to make a video discussing them side by side
@qwe304
Жыл бұрын
I would stay away from uarm personally, their lv 3 plates have a concerning amount of BFD.
Wonder how effective it is against high explosive constructive criticism. -Russian Badger enjoyer.
What do you think about the claim that the 6.8x51 AP round will be able to go through modern level 4 armor at lower velocities or extended ranges?
@Oxide_does_his_best
Жыл бұрын
I highly doubt it, but I need to test the round
@andycraig6905
Жыл бұрын
@@Oxide_does_his_best me too. I heard that they've got some sort of projectile that doesn't need as much velocity but it sounds like smoke and mirrors. Also if they knock through level 4 then I'm pretty sure we'll just make armor stronger.
@somerandommen
Жыл бұрын
Consider his footage, he's got some 6.8 TVCM and not 6.8 Fury. The claims are about 6.8 Fury's capabilities, not 6.8 TVCM. He can't even do a proper test.
@Oxide_does_his_best
Жыл бұрын
@@somerandommen I can definitely do a proper test 😎👍 just give me a minute
@somerandommen
Жыл бұрын
@@Oxide_does_his_best Ok pog
they wont live long enough to use it in a war lol
Copyclaim? What copyclaim?
Yes you can get a hotter and stronger and better round. GERMAN 8mm smkh. Ask buff for some. Im sure he will hook you up.
Please I beg you get the 9x39m ap vs esapi video done fast
@Oxide_does_his_best
Жыл бұрын
Be like two days or sooner
CAT
You should try to get your hands on one of those magical BR6 rated armor things.
@Oxide_does_his_best
Жыл бұрын
Those are for vehicles usually
@drewskizloty9068
Жыл бұрын
@@Oxide_does_his_best Ah alright, I thought there was some sort of body armor able to withstand the russian 12.7 round
@ChickEd1
Жыл бұрын
@@Oxide_does_his_best Не совсем так, БР6 выделяется только для штурмовых подразделений, эта штука не для всех, лично у меня комплект был БР6, таскал в AVS
Damnnn you're not that big of a channel yet and you buy so many expensive toys for us xD. How much did this endeavor cost you? Before the sanctions it was hard, now... You're super man after eing able to buy these. Cool tech though, but i wouldn't trust my life on the spaces between the hexagonal ceramic plates. Weak spot there
No outro ?
@Oxide_does_his_best
Жыл бұрын
Had to remove it
@samuelcouvin7206
Жыл бұрын
@@Oxide_does_his_best it was the music huh ? Thought you gave up on monetization
@Oxide_does_his_best
Жыл бұрын
@@samuelcouvin7206 Its a visibility block, has nothing to do with monetization. I didn't give up on monetization, it was sized from me. I can't restore it.
@samuelcouvin7206
Жыл бұрын
@@Oxide_does_his_best wow yt sucks sorry for you man
Seems like the "Dragon Skin" armor but actually done right
@BuffRANGE
Жыл бұрын
Dragon Skin's tiles were circular and over lapped each other :D
Why was it censored? 3:15
@Oxide_does_his_best
Жыл бұрын
Serial number
@fuzzybloodpc9291
Жыл бұрын
@@Oxide_does_his_best Ah okay
🇷🇺🎖
Fort seems to be one of the least "compromised" Russian Companies out there. Good product!
老哥什么时候出我们新盔的视频,催更新了
Looks like the russians can make equipment that isnt disapointing when its in limited production for truly elite units
@sata1938
Жыл бұрын
And then the truly elite units get dropped off in the Black Sea to denazify the fish and retake the Moskva lmfao
@TheRifild
Жыл бұрын
@@sata1938 any Video/photo evidence?
@dipjyotitalukdar9598
Жыл бұрын
@@sata1938 Not before capturing some pindo mercenaries.
Я открою величайшую тайну российской армии, в ней нет таких подразделений как "Спецназ"
@Fred_the_1996
3 ай бұрын
??????
Yeah...surely Ruzzia has money to produce these for special forces, they don't even have money to give basic helmets to all soldiers or hand everyone an ak-74.
@Oxide_does_his_best
Жыл бұрын
Fun fact, if Special Forces soldiers of Russia can be proven to have been killed in action without using their armor, their families don't get life insurance payouts
@waty0usay1
Жыл бұрын
@@Oxide_does_his_best the only insurance their families get is a bag of food and some vodka, that's how down bad ruzzia is.
@ryssa2409
Жыл бұрын
@@Oxide_does_his_best proofs?
@Oxide_does_his_best
Жыл бұрын
@@ryssa2409 proofa doodle dooooo!
@ryssa2409
Жыл бұрын
@@Oxide_does_his_best so no proofs gotcha )))0)
No joke let out an audible gasp when I saw it stop M993....does the US or NATO nations have any armour even close to this?
@Chiboza
Жыл бұрын
Yes, NATO armor is even better
@Oxide_does_his_best
Жыл бұрын
Depends on the plate. Some can and some can't stop 993 under the same conditions
@qwe304
Жыл бұрын
The US made a similarly capable plate back in the early 2000s, as a response to the threat of russian tungsten core ammo in iraq, however they were a bit heavier than the standard issue ones, and the threat never materialized, so they were never fielded in a large scale, however tens of thousands were made. While they have a worse multi-hit performance than this tile array plate, they can also stop m993.
ok but what about one more vdv drop
@Oxide_does_his_best
Жыл бұрын
I honestly have still not seen evidence of a paradrop yet
@EliWritesStories
Жыл бұрын
@@Oxide_does_his_best did they have fortnite loot crates in them
lmao hasn't helped them much though
God bless Russian logistical corruption. Russian soldiers in the field with bare AK-74's yet online the wide range of current issue russian optics and gear is still for sale in USD.
Tangentially related, but with level 3-4 plates becoming standard issue among western forces, and the Russian military possessing a variety of high level protection plates, how much of this body armor is making its way down to the boots-on-the-ground infantry? (instead of being sold off by Misha for extra vodka rubles)
@rozkaz661
Жыл бұрын
Hard to give percentage but from ukraine it seems it greatly depends on the unit. Some mishas are more vodka hungry then others. there were reports of some guy ariving at tge front only to be handed very old plate carriers and plates that stunk of death but hard to say exactly how big of a problem it is
@KeksimusMaximus
Жыл бұрын
This kind of armor for regular army? Never. Only for high-tier special units (for what you consider "police" mostly, not even army). Source: am russian, served in a ГРУ spetsnaz unit
@AlexsEquipmentCorner
Жыл бұрын
Gladiators and Goplits are never issued to infantry, teh granits are pretty common tho and aren't bad
@XKS99
Жыл бұрын
I heard French 155mm CAESARs go for 120k USD in Ukraine
@ryssa2409
Жыл бұрын
Oldest carrier i've seen on a Russian unit was 6b23 on some tiktok with logi drivers VDV/Marines seem to have 6b43s and Rosgvardia has anything from Korund vests to custom plate carriers like Pantsir SSO with granit plates I think standart issue plates are granits which are 5a (somewhere between IV and III)
I wonder how the PLA plates compare to these. These are special forces only whereas the PLA's plates are standard issue, I think they acquired 1.2 million units in 2020. Time to testify the NGSW program.
@qwe304
Жыл бұрын
Every parade video I've seen has them marching around in empty carriers
@botwally2954
Жыл бұрын
@@qwe304 The 1.4 million unit procurement was publicly announced, so I don't think it is fake. The reason they don't wear them regularly might be due to the fact that ceramic plates are very prone to damage, and they are quite expensive, especially with silicon carbide or boron carbide plates.
@qwe304
Жыл бұрын
@@botwally2954 yes, and the Russians also planed to procure 2,300 t-14 armata tanks. They ended up with 20. And given the performance of imported Chinese armor so far, I'm not expecting much.
Do you like russia or only their special forces?
So your saying the adoption 6.8x51 fairly pointless and M855A1 works just the same after multiple shots. So, I'll keep my 5.56 with low recoil and hit the tap button until the Commie falls down.
@Oxide_does_his_best
Жыл бұрын
6.8 has other benefits. I won’t know how good the ap is till I test it
@somerandommen
Жыл бұрын
"until the Commie falls down."... LARP.
Slava Z!
This plates were produced in Ukraine. Now Russians experience huge problems with the plates and trying to use regular steel as an replacement.
@emperorpalpatine1469
Жыл бұрын
Source???
@bomjahed
Жыл бұрын
@@emperorpalpatine1469 Gost of kiev lmao
@VASILLEVSKI1878
Жыл бұрын
Since February 24th 2022, everything made in Russia is actually MADE IN UKRAINE!! Bet you didn't know that, but it's true. Ukraine owns Russia and Russia simply doesn't exist because everything there was automatically turned into Ukraine. Shocking news!!!!!
(FOR THE LOVE OF GOD DO THE XSAPI !!!!!!!!!!!!
@Oxide_does_his_best
Жыл бұрын
Yes
@qwe304
Жыл бұрын
Buffman will do one too soon
cutting edge of year 2000...
@Oxide_does_his_best
Жыл бұрын
I bet you there were no plates that could stop tungsten available for infantry anywhere in the world in 2000
@Hijackerrr
Жыл бұрын
@@Oxide_does_his_best you are not showing infantry body armor as far as i know
@Oxide_does_his_best
Жыл бұрын
@@Hijackerrr what’s a special forces plate that could do it back then?