The cast iron base is painted and gold trim is applied. The base is then reassembled.
Жүктеу.....
Пікірлер: 69
@riskygamble3 жыл бұрын
I've been looking for a good alternative to gold paint for years now. Thanks for showcasing Rub n Buff, I can't wait to use it on a resto project!!
@LostMountainRestoration
3 жыл бұрын
Glad to help
@sjflynn20103 жыл бұрын
One suggestion when putting the bolts and screws and moving parts together use Never Seez and 100 years from now they will have no problems removing them. Just on the base parts. I also use it on a few of the machine lubrication spots,mainly screws and bolts/tensioner,and a few others.Machine light grease,and machine oil the rest.
@marykalexander27358 ай бұрын
Outstanding… I want to have my grandmother’s restored one day. ❤️
@1911olympic7 ай бұрын
The gold looks very good! Top job!👍👍👍
@FaerySeeker5 жыл бұрын
You did a fabulous job! Love your work!!
@doracamarena35885 жыл бұрын
Great detailed job . Love it.!!!
@bellunderwood42725 жыл бұрын
Beautiful work!!
@QueenCityHistory5 жыл бұрын
Rub n buff is amazing stuff!! I've used it to touch up old frames where the gilding is missing
@tobyssewingmachinerepair89493 жыл бұрын
Great job on that gold trim!
@dominaevillae28 Жыл бұрын
Thank you! I just picked up a 1927 Singer Model 66 at an antique shop.
@nathalieslachmuylders2 ай бұрын
Thanks so much for all the information! I am enjoying re-watching this series as I tackle repair jobs to my great-great grandmothers machine (bought in 1894). The wood has all kinds of damage. The cast iron has some rust and some paint 'rubbed off' (but not chipped). As I live in a small space where I can't ventilate or take it outside, I am looking for a way to cut some corners with the cast iron so that I can just remove the rust and maybe seal or treat it in some way to prevent future damage, without using toxic products or spray painting, not necessarily going for a picture perfect look. Haven't found any easy solutions yet, but any info much appreciated.
@Sharon-pb7so5 жыл бұрын
Larry, you are most welcome, it was totally my pleasure. That base looks FABULOUS! Just perfect! I wish I knew why Singer made some bases with the gold and some without. Thank you for showing, up close and personal, how doing something the right way is still the best way. So much for my plan for my treadle irons. 😂 Looks like they're going to be done right. For what it's worth I suspect my husband, who is an engineer and therefore anal about doing everything right, would have nixed my idea. I can't wait to see the finished cabinet in all her glory.
@LostMountainRestoration
5 жыл бұрын
Husbands can be like that. I know, because I are one! LOL. Thanks again.
@kozakkreations5 жыл бұрын
Great video! Thank you. I appreciate your time and effort to show us how to refinish these bases.
@LostMountainRestoration
5 жыл бұрын
Thank you!
@susanrisdale7093 Жыл бұрын
What colour rub n Buff gold did you use please? Thanks.
@alyssapeters62712 жыл бұрын
10:36 assembly. Yes! Thank you! Now I've marked my spot and can come back to it.
@murmaiderx39234 жыл бұрын
bravo ! well done! I can only hope to make all my 29k's look that good.
@IngWARrioRR Жыл бұрын
Прекрасная работа! Я посмотрела все части. Спасибо огромное!
@faithmccann87394 жыл бұрын
Watch out for your adorable puppy!
@LostMountainRestoration
4 жыл бұрын
He has a tendency to show up when I least expect him. I do try to keep him away from over spray and the like now.
@emilylindstrom7245 жыл бұрын
Lovely!
@mimiq642 жыл бұрын
Love it
@5pr1nk573 жыл бұрын
Just bought one of these beauties to upcycle into a PC desk, got all of this ahead of me first! Great job you done! P.S. You sound very alike Hopper from Stranger Things Lol
@LostMountainRestoration
3 жыл бұрын
Glad it helped. I have never watched that show, but if he sounds like me, I feel sorry for him! LOL.
@jomercer211132 жыл бұрын
that's a chipmunk making that "chip chip" noise
@rebeccarenner89272 жыл бұрын
Beautiful!
@thecreativecardinalbyl.bet70125 жыл бұрын
GORGEOUS! Your meticulous attention to detail is amazing! Question: Did you seal the Rub -n- Buff with anything?
@LostMountainRestoration
5 жыл бұрын
Thank you for your kind words. No, I don't seal it in. Thanks for watching.
@surfearth12 жыл бұрын
Do you clear coat over any of it? What brand of black paint did you use? Thanks great video!
@marylangford1565 ай бұрын
Where can you buy replacement wheels? Thank you for the excellent video!!
@johnbass17015 жыл бұрын
Larry, did you colorfast the gold paint after it dried? If so, what did you use? (Good video BTW)
@kevinorr68804 жыл бұрын
Just came home with a treadle 66 "redeye" this very moment. Glad to have found your channel. Source for replacement parts? I anticipate some. I'm missing one caster wheel at the moment.
@LostMountainRestoration
4 жыл бұрын
Normally, eBay is the best place to find replacement parts. If you can find a trashed machine too far gone to restore, it will be a treasure trove of parts for your future restorations. Good luck!
@louel9md Жыл бұрын
Hi i got some of these to restore for personal use but the previous owner painted it with regular black metal paint from a can, it has brush hairs stuck all over and the paint was applied too thick and i think with no prep work as some rust is showing under the paint. What do u recommend in getting it back down to bare metal? Sandblasting? Cuz paint stripper might take too long with all the nooks and crannies. Thankyou and great job sir
@SapaHollidaySaparonia5 жыл бұрын
Mona Lisa!
@michaelshannon29776 ай бұрын
Hi i see in clip a large spring sitting next to the large drive wheel is it part if the mechanism as i have picked up a singer metal base but no spring it is in a really bad state mike in uk
@52memor5 жыл бұрын
Yes I'm second it's 10.03 PM UK
@paintedinacorner3 жыл бұрын
This is awesome - I just found a singer sewing machine base I’m looking to restore. I’m an apartment dweller.. so any advice for stripping the old paint and rust would be helpful!
@LostMountainRestoration
3 жыл бұрын
I use a wire brush on a grinder. You can use a wire brush on a drill. You could also use a commercial paint stripper, but that's a huge mess. If you can find someone with a sand blast cabinet, they can get it blasted off for you and that's money well spent. This is the one part of these restorations that I really don't care for. I wish I had the room for a good sandblast cabinet myself. Good luck!
@pearlllg5 жыл бұрын
You said that the Rub-n-Buff could be removed easily with mineral spirits. Is it permanent once it drys and sets or will it still come off easily?
@LostMountainRestoration
5 жыл бұрын
It gets hard and will last without being top coated.
@isislindayvonne96783 жыл бұрын
I have this sewing machine and I’m curious if restoring the base as you have done here will increase the value and/or interest in the item when reselling?
@LostMountainRestoration
3 жыл бұрын
It depends on your market. Here, these are not very popular and ALL of the restorations I do are for people who have an emotional/family attachment to the item. There is a small market for these among people who like to sew with them and if you can find a buyer you may have a re-sale opportunity - good luck with your project.
@bodog1killer1462 жыл бұрын
Just wanted to know if you are still doing this sort of work. Just received my dear grandmother’s machine. I am very interested in getting it restored. This is the machine she taught me to sew on MANY years ago. We think it’s from 1941.
@jill5525 жыл бұрын
That base looks amazing. How do you know it’s a “girl”? I don’t think I’ll ever have the patience to get mine looking that good.
@adambrown2626
2 жыл бұрын
All my vintage machines are girls, they are things of beauty.
@utsonyrv4 жыл бұрын
what is the model no of this cast iron base ?
@RealtorDeCarlo3 жыл бұрын
How do you rebuild the bearings? I've taken mine apart and can't figure out how to put the bearings back in. This is regarding the wheel that spins...
@LostMountainRestoration
3 жыл бұрын
I have never replaced those. Without looking, I assume they would have to be pressed out, but I don't know what you could do for a replacement. You may be able to buy a parted out flywheel on line and simply swap it out. Good luck!
@corydriver76345 жыл бұрын
I totally would have sent the ironwork out to be blasted or dipped; way too much work for me. Nice job though ...good on ya.
@cristinavincent1103 Жыл бұрын
I don’t see any detail about type of paint used and how you prepped metal. Maybe that’s in part 5? I can’t find it. Also I’ve been taught never to wear gloves using a wire wheel. It could grab your glove and get it stuff.
@CoopersWorkbench4 жыл бұрын
I've got one that has a snapped rod,the bit that connects the treadle to the big wheel. Do you know what its called.? I'm no welder so hoping to get a replacement part.
@LostMountainRestoration
4 жыл бұрын
It's the Pitman Arm. On the older machines, it was made of wood. If you search eBay for Pitman Arm Assembly, you may find what you need - good luck!
@CoopersWorkbench
4 жыл бұрын
@@LostMountainRestoration thanks buddy. FYI your restoration is the bomb and the best I've seen in months of searching. I used spray paint dabbed on with a sponge for the letters before but I like your method much better
@LostMountainRestoration
4 жыл бұрын
@@CoopersWorkbench Thanks. I have 3 or 4 full restorations of these sewing machines on my channel if you can stomach any more! LOL - Good luck with your projects!!
@RaeTheRidingHood3 жыл бұрын
What's the best way to remove rust?
@LostMountainRestoration
3 жыл бұрын
It depends on what the rust is on and how bad it is. You can often use a wire wheel and it will take off surface rust. You can also soak it in vinegar for a day or so and scrub it clean or use a product like Evapo-Rust. Good luck!
@marisellsanchez83922 жыл бұрын
Me gustaría fuese traducido al español.
@wharrison71314 жыл бұрын
The Rub n Buff on Amazon comes in several gold shades. Which one did you use?
@MrJones-918
4 жыл бұрын
Thank you!! I have same question?
@Mpompadour
4 жыл бұрын
@@MrJones-918 Looks like the tube says European Gold
@davecalanog3734 жыл бұрын
sir i have an old singer siwwing machine..
@Sharon-pb7so5 жыл бұрын
First! 😁
@LostMountainRestoration
5 жыл бұрын
Thanks for your help.
@MamaAlbrecht4 жыл бұрын
Rebuilding a treadle and adding missing parts. My treadle doesnt have anywhere to bolt on a belt guide! Would it have been screwed to the wood above? I see in some manuals like for the vs2 it shows a round belt guide not an oval one and it coming down from above not out towards the back. Have you ever run into different belt guide locations?
@LostMountainRestoration
4 жыл бұрын
Now that you mention it, I have only seen ones like you see here. That doesn't mean different ones didn't exist, though. Thanks for watching.
@kiimmig22932 жыл бұрын
If it isn’t worth doing right it’s not worth doing. In my words, get out of the way I’ll do it. 😂
Пікірлер: 69
I've been looking for a good alternative to gold paint for years now. Thanks for showcasing Rub n Buff, I can't wait to use it on a resto project!!
@LostMountainRestoration
3 жыл бұрын
Glad to help
One suggestion when putting the bolts and screws and moving parts together use Never Seez and 100 years from now they will have no problems removing them. Just on the base parts. I also use it on a few of the machine lubrication spots,mainly screws and bolts/tensioner,and a few others.Machine light grease,and machine oil the rest.
Outstanding… I want to have my grandmother’s restored one day. ❤️
The gold looks very good! Top job!👍👍👍
You did a fabulous job! Love your work!!
Great detailed job . Love it.!!!
Beautiful work!!
Rub n buff is amazing stuff!! I've used it to touch up old frames where the gilding is missing
Great job on that gold trim!
Thank you! I just picked up a 1927 Singer Model 66 at an antique shop.
Thanks so much for all the information! I am enjoying re-watching this series as I tackle repair jobs to my great-great grandmothers machine (bought in 1894). The wood has all kinds of damage. The cast iron has some rust and some paint 'rubbed off' (but not chipped). As I live in a small space where I can't ventilate or take it outside, I am looking for a way to cut some corners with the cast iron so that I can just remove the rust and maybe seal or treat it in some way to prevent future damage, without using toxic products or spray painting, not necessarily going for a picture perfect look. Haven't found any easy solutions yet, but any info much appreciated.
Larry, you are most welcome, it was totally my pleasure. That base looks FABULOUS! Just perfect! I wish I knew why Singer made some bases with the gold and some without. Thank you for showing, up close and personal, how doing something the right way is still the best way. So much for my plan for my treadle irons. 😂 Looks like they're going to be done right. For what it's worth I suspect my husband, who is an engineer and therefore anal about doing everything right, would have nixed my idea. I can't wait to see the finished cabinet in all her glory.
@LostMountainRestoration
5 жыл бұрын
Husbands can be like that. I know, because I are one! LOL. Thanks again.
Great video! Thank you. I appreciate your time and effort to show us how to refinish these bases.
@LostMountainRestoration
5 жыл бұрын
Thank you!
What colour rub n Buff gold did you use please? Thanks.
10:36 assembly. Yes! Thank you! Now I've marked my spot and can come back to it.
bravo ! well done! I can only hope to make all my 29k's look that good.
Прекрасная работа! Я посмотрела все части. Спасибо огромное!
Watch out for your adorable puppy!
@LostMountainRestoration
4 жыл бұрын
He has a tendency to show up when I least expect him. I do try to keep him away from over spray and the like now.
Lovely!
Love it
Just bought one of these beauties to upcycle into a PC desk, got all of this ahead of me first! Great job you done! P.S. You sound very alike Hopper from Stranger Things Lol
@LostMountainRestoration
3 жыл бұрын
Glad it helped. I have never watched that show, but if he sounds like me, I feel sorry for him! LOL.
that's a chipmunk making that "chip chip" noise
Beautiful!
GORGEOUS! Your meticulous attention to detail is amazing! Question: Did you seal the Rub -n- Buff with anything?
@LostMountainRestoration
5 жыл бұрын
Thank you for your kind words. No, I don't seal it in. Thanks for watching.
Do you clear coat over any of it? What brand of black paint did you use? Thanks great video!
Where can you buy replacement wheels? Thank you for the excellent video!!
Larry, did you colorfast the gold paint after it dried? If so, what did you use? (Good video BTW)
Just came home with a treadle 66 "redeye" this very moment. Glad to have found your channel. Source for replacement parts? I anticipate some. I'm missing one caster wheel at the moment.
@LostMountainRestoration
4 жыл бұрын
Normally, eBay is the best place to find replacement parts. If you can find a trashed machine too far gone to restore, it will be a treasure trove of parts for your future restorations. Good luck!
Hi i got some of these to restore for personal use but the previous owner painted it with regular black metal paint from a can, it has brush hairs stuck all over and the paint was applied too thick and i think with no prep work as some rust is showing under the paint. What do u recommend in getting it back down to bare metal? Sandblasting? Cuz paint stripper might take too long with all the nooks and crannies. Thankyou and great job sir
Mona Lisa!
Hi i see in clip a large spring sitting next to the large drive wheel is it part if the mechanism as i have picked up a singer metal base but no spring it is in a really bad state mike in uk
Yes I'm second it's 10.03 PM UK
This is awesome - I just found a singer sewing machine base I’m looking to restore. I’m an apartment dweller.. so any advice for stripping the old paint and rust would be helpful!
@LostMountainRestoration
3 жыл бұрын
I use a wire brush on a grinder. You can use a wire brush on a drill. You could also use a commercial paint stripper, but that's a huge mess. If you can find someone with a sand blast cabinet, they can get it blasted off for you and that's money well spent. This is the one part of these restorations that I really don't care for. I wish I had the room for a good sandblast cabinet myself. Good luck!
You said that the Rub-n-Buff could be removed easily with mineral spirits. Is it permanent once it drys and sets or will it still come off easily?
@LostMountainRestoration
5 жыл бұрын
It gets hard and will last without being top coated.
I have this sewing machine and I’m curious if restoring the base as you have done here will increase the value and/or interest in the item when reselling?
@LostMountainRestoration
3 жыл бұрын
It depends on your market. Here, these are not very popular and ALL of the restorations I do are for people who have an emotional/family attachment to the item. There is a small market for these among people who like to sew with them and if you can find a buyer you may have a re-sale opportunity - good luck with your project.
Just wanted to know if you are still doing this sort of work. Just received my dear grandmother’s machine. I am very interested in getting it restored. This is the machine she taught me to sew on MANY years ago. We think it’s from 1941.
That base looks amazing. How do you know it’s a “girl”? I don’t think I’ll ever have the patience to get mine looking that good.
@adambrown2626
2 жыл бұрын
All my vintage machines are girls, they are things of beauty.
what is the model no of this cast iron base ?
How do you rebuild the bearings? I've taken mine apart and can't figure out how to put the bearings back in. This is regarding the wheel that spins...
@LostMountainRestoration
3 жыл бұрын
I have never replaced those. Without looking, I assume they would have to be pressed out, but I don't know what you could do for a replacement. You may be able to buy a parted out flywheel on line and simply swap it out. Good luck!
I totally would have sent the ironwork out to be blasted or dipped; way too much work for me. Nice job though ...good on ya.
I don’t see any detail about type of paint used and how you prepped metal. Maybe that’s in part 5? I can’t find it. Also I’ve been taught never to wear gloves using a wire wheel. It could grab your glove and get it stuff.
I've got one that has a snapped rod,the bit that connects the treadle to the big wheel. Do you know what its called.? I'm no welder so hoping to get a replacement part.
@LostMountainRestoration
4 жыл бұрын
It's the Pitman Arm. On the older machines, it was made of wood. If you search eBay for Pitman Arm Assembly, you may find what you need - good luck!
@CoopersWorkbench
4 жыл бұрын
@@LostMountainRestoration thanks buddy. FYI your restoration is the bomb and the best I've seen in months of searching. I used spray paint dabbed on with a sponge for the letters before but I like your method much better
@LostMountainRestoration
4 жыл бұрын
@@CoopersWorkbench Thanks. I have 3 or 4 full restorations of these sewing machines on my channel if you can stomach any more! LOL - Good luck with your projects!!
What's the best way to remove rust?
@LostMountainRestoration
3 жыл бұрын
It depends on what the rust is on and how bad it is. You can often use a wire wheel and it will take off surface rust. You can also soak it in vinegar for a day or so and scrub it clean or use a product like Evapo-Rust. Good luck!
Me gustaría fuese traducido al español.
The Rub n Buff on Amazon comes in several gold shades. Which one did you use?
@MrJones-918
4 жыл бұрын
Thank you!! I have same question?
@Mpompadour
4 жыл бұрын
@@MrJones-918 Looks like the tube says European Gold
sir i have an old singer siwwing machine..
First! 😁
@LostMountainRestoration
5 жыл бұрын
Thanks for your help.
Rebuilding a treadle and adding missing parts. My treadle doesnt have anywhere to bolt on a belt guide! Would it have been screwed to the wood above? I see in some manuals like for the vs2 it shows a round belt guide not an oval one and it coming down from above not out towards the back. Have you ever run into different belt guide locations?
@LostMountainRestoration
4 жыл бұрын
Now that you mention it, I have only seen ones like you see here. That doesn't mean different ones didn't exist, though. Thanks for watching.
If it isn’t worth doing right it’s not worth doing. In my words, get out of the way I’ll do it. 😂