Nice job bringing those old knives back to life. They will now serve someone for many more years.

@theknifedr-edc

20 күн бұрын

Thank you!!

Yes sir it is lots of fun watching you rebuild these knifes sir watch you all the time and at the same time learn from you aswell with everything that you share.

@theknifedr-edc

19 күн бұрын

Awesome!! Thank you!!

Nobody said being The Knife Doctor was easy but you knocked it out of the park like usual!

@theknifedr-edc

19 күн бұрын

Thank you!!

Seeing the recent scout knives took me digging for my old Boy Scout knife. It’s a Camilus from the late 90s

@theknifedr-edc

20 күн бұрын

That’s awesome!

Excellent job on those repairs. Its nice to have spare parts knives to salvage from.

@theknifedr-edc

19 күн бұрын

Yes it is. That’s why I like to buy junk knives.

Wow, one of those still exists! Gotta be from the 1950's. I gave mine to my brother.

Nice work Kevin. You did a great job on both those knives.

@theknifedr-edc

19 күн бұрын

Thank you!!

Great job on both knives, Doc. You were more than up for the challenge!

@theknifedr-edc

20 күн бұрын

Thank you!!

The cool thing is that vintage Case Shield gets to live on 👍

@theknifedr-edc

20 күн бұрын

It does!! Thanks for watching!!

My goodness Doc, Josh should be one happy camper you fully restored that old case knife, it looks so good now! You also brought that old camillus cub scout back too very nice!

@theknifedr-edc

20 күн бұрын

Thank you!!

Wow is all I can say on my knife and you never cease to amaze me excellent job looks like a totally different knife. Thank you very much Mr. Kevin (knife doctor) and enjoy the zippo case

@theknifedr-edc

19 күн бұрын

Thank you!! I’m getting it in he Mail Tomorrow.

You did a great job Kevin I mean you are the knife Dr! Great job

@theknifedr-edc

20 күн бұрын

Thank you!!

The ice pick is a great idea Kevin, thanks for that bit of knowledge, cuz I’m always bending and breaking punches. Thanks for the content. And God bless.

@theknifedr-edc

19 күн бұрын

Yeah. I was too. The pins are hard to get started sometimes. I tried it and it works very well. Nice and sturdy. Thanks for those kind words! Thanks for watching!

@OzarksBoy417Knives

19 күн бұрын

@@theknifedr-edc of course

You did it- this is a legacy knife now

I know you were pissed off at that knife!😂 you were ready to scrap that joker!

@theknifedr-edc

19 күн бұрын

It came close. I just kept on chugging along. LOL

Great info ! Thanks for describing the two different scout knives ; blue being cub scout & black are boy scout ,

Nice job! Your the Doctor!

@theknifedr-edc

19 күн бұрын

Thank you!!

Good Deal my friend 😊

😮 Amazing!!! Never say die. Got to drive on. Amen. Oh-rah !!! Great video DOC.. Semper Fi Marine 💪...

@theknifedr-edc

20 күн бұрын

Thanks Bruce! Semper-Fi!!

Great job on both those knives doc! They look fantastic now. I’ve learned a lot from watching your restoration videos, thanks.

Wow 🤯. Looks great. 👍

Nice job! I’ve got a Boy Scout knife from the 70’s somewhere. It was given to me when I was a Boy Scout. But, I had a Barlow that I preferred to carry. So…..if I can find it, it is likely still in packaging and virtually brand new. Probably at my parents’ somewhere.

Another great informative video Doc. I ordered myself a hat to help advertise for your channel. Keep up the good work.

@theknifedr-edc

20 күн бұрын

Awesome Sir! Thank you! My cousin Rebecca appreciates it!

Very good 👍 job on both knives. I have a couple of camillus knives that where 2nd and they grind the name of. As always be safe and healthy and God Bless America 🇺🇸 🙏

@theknifedr-edc

20 күн бұрын

Thanks Howard!!

Wow that case sure does look good and cubscout knife came out nice too great video thanks for sharing

@theknifedr-edc

20 күн бұрын

Thank you!!

Welcome

Nice job on the yellow case knife👍👍

@theknifedr-edc

20 күн бұрын

Thank you!!

Never heard of using vinegar to clean knives. I only use alcohol if needed after using with food or something. I do use the acid from vegetables and fruits to give all my carbon steel blades designs, which is fun for me. It is no where near as harsh as using vinegar. I only use vinegar on stains, like toilets and showers.

I've got a white camillus cub scout knife that I found. It's not much though and I would have never known what kind of knife it was until I started watching your channel doc. Think of it read it correctly the white handle was made from 76 thru 79.

Multi blade knives can be the devil's own job to get new pins in. Lining things up as 2 separate springs, are pushing back. Egad !

Case looked awesome

@theknifedr-edc

18 күн бұрын

Thank you!!

I don't have the patience to do that. Nope. LOL

@theknifedr-edc

19 күн бұрын

LOL!! Had a great time with Wade today!!

Another great video, a lot learned here. A) got to change Bucky Bears name to Booger Bear. B) things don’t go as planned is why Doc doesn’t want to work on others sentimental knives. C) wish I knew more about vinegar bath pitfalls a couple of weeks ago before I soaked a rusted up garden tool box Old Hickory slicer for 2 or 3 days. Vinegar will EAT METAL if left too long! Thanks for the class again Doc! I hope you can learn the double pin method so you can put the bells back on that you like.

Good job on the scout knife. Get a jewelers loupe and look down into your new trapper lock...it uses a ball-detent system 🤷🏼‍♂️😇🤗

@theknifedr-edc

20 күн бұрын

10-4!! Thank you!

They grind the tang stamps down so the manufacturer can sell the knife as a factory second. All the knife would normally have would be small blemishes but quality control was a lot tighter back in those days.

@theknifedr-edc

20 күн бұрын

Thanks for sharing this!!

Thanks a MILLION for this video. I picked up an Imperial KampKing for $3.00 at a thrift store. Just for practice, I will refurbish it for a bad pin and t to clean it up. Your link to the instructions was just what I needed! Blessings.

@paulrice8342

20 күн бұрын

For pins, that is.

@theknifedr-edc

20 күн бұрын

That’s awesome

Good morning everyone!!!!

@theknifedr-edc

20 күн бұрын

Good Morning!!

Your the best 👍👌👌❤️🇨🇦

Great information about the anatomy of a scout knife and techniques for cleaning up old knives. Two beautiful knives in the end.

@theknifedr-edc

20 күн бұрын

Thank you!!

You did a nice job on the CASE. And on the Cub Scout knife 💯🇺🇸👀👍

@theknifedr-edc

20 күн бұрын

Thank you!!

💪💪

👍❤

Good work on the Camillus, that was a tough one.

@theknifedr-edc

20 күн бұрын

It was a BOOGER BEAR!! LOL

I picked up a Remington Bullet R4353 (circa 1920-1930) in a pawn shop today. Unfortunately it has a wounded blade. Probably be hard to find a replacement donor.

@theknifedr-edc

19 күн бұрын

Yeah…that’s a very nice find though!!

Excellent video. Taught me some new tricks. Thank you. Cheers.

@theknifedr-edc

20 күн бұрын

Thank you!!

Great job.

@theknifedr-edc

20 күн бұрын

Thanks!

Hey Kevin I got me a Winchester's sallbelly 92 year But it has a broken Spring on the main blade I was gonna see if you had one laying around

@theknifedr-edc

19 күн бұрын

I don’t man. Sorry about that.

More good work Kevin. Can I ask which brand or where you buy your wire brushes you use in your dremmel from. The reason I ask is every one I have bought just spit wires the whole time in use. Regards,

@theknifedr-edc

19 күн бұрын

I bought a 3 pack at harbor freight. These seem to be doing good. I’ve had those too where it spits wire at you.

Hello Mr Kevin would you mind sharing where you get your pin material at for replacing the pins. Its been a few days but feeling better so I wanted to thank you sir for a cool informative video. Have a fantastic day

@theknifedr-edc

19 күн бұрын

Glad you are feeling better. I order them from Amazon. Here is a link for the ones that I use amzn.to/3WJekRx

@user-Bladewalker

18 күн бұрын

Thank you sir I appreciate the prayers my friend and the kindness you shared with me. Much love to you and yours

Zippo knife is cool, are you putting on sales?

@theknifedr-edc

19 күн бұрын

No, that’s a keeper!!

Hey Kevin, What wire brush are you using? It looks a little different.

@theknifedr-edc

19 күн бұрын

I bought a 3 pack at Harbor Freight.

Where do you get the new knife pins from and how do you judge size ?

@theknifedr-edc

19 күн бұрын

I order them from Amazon. Here is a link for the ones that I use amzn.to/4dGVbFS

I noticed that you put water on the parts before applying the Clear Gorilla Glue? I use Clear Gorilla Glue and I read the instructions and it says to be sure the surface is wiped clean and it makes no mention of wetting the surface? It does on regular Gorilla Glue but it expands and the clear glue doesn’t.Does your Clear Gorilla Glue call for water to be applied? I have a couple of different bottles and neither mention using water? 😮

@theknifedr-edc

20 күн бұрын

Mine says dampen non porous materials.

@1OFGODSOWN

20 күн бұрын

@@theknifedr-edc I have not seen any of the Clear that says to dampen anything? I will check all of the bottles at Walmart and see what they say.Only the brown stuff I have says that but not the clear?😳

👍✌️❤️🇨🇦

Are most knife pins all the same size? I know they come in different materials, and where do you get your knife pins?

@theknifedr-edc

20 күн бұрын

I use a variety pack from Amazon. Here is link: amzn.to/3WLQqFb

@drewwhite5601

20 күн бұрын

Great work doc been doing the same thing this morning re building an old Sheffield knife , nice to see how we all re build differently, keep up the great work 👊

No perfect but better, to bad that the scales don’t fit flush

Do you sell any zippos on whatnot the knife dr

@theknifedr-edc

20 күн бұрын

I haven’t so far

@user-zv9yx7bt7n

20 күн бұрын

@@theknifedr-edc ok thanks for your service you are the only KZread creator that I have notifications on because you make the best videos and tough me a lot about knives.

A shame some type of rust remover bath ruined that knife.

@theknifedr-edc

20 күн бұрын

Yep…lots of people do that.