Blade guard is essential. Put it on even if it looks dull as it could save you from serious injury.

no music no trash talking no begging for anything just a perfect restoration!

@gdiaz8827

26 күн бұрын

Wouldn't mind some audio or textual commentary

really good work... and I know finding a replacement for that broken guard is probably about impossible... but it's really a must

This is an expert rebuild technician. You can tell he has a lot of experience.

@billykulim5202

Жыл бұрын

i dont thinks he should use penetrating oils for carbon brush plastic housing, penetrations oils are for metal screw

@psilver063

Жыл бұрын

That saw could have been cleaned up without all that drama 🤣. Such stupid fools in this world! Look how clean it came with some soap and water, acting like he did something spectacular

I cannot say enough about your ability to put the most complex gadgets back together again!!

@billykulim5202

Жыл бұрын

how do he remember how to put together those screw and stuff, are he playback the recording video or he write it all down

You are a true fixer of things. Shame there was no replacement for the shield. However... also knowing how to recreate the decals, from scratch, is another world entirely. Graphics, as well as mechanically inclined? Damn... You're good.

@natureboygolfer

Жыл бұрын

The decals were what got me too Seemsayin

@Seemsayin

Жыл бұрын

@@natureboygolfer I really had to give him a big nod. For most... it's one or the other. He's got both.

@user-iy1do4gv9i

8 ай бұрын

​@@Seemsayinبيبي👏ثثصصصضصضضضض

What a perfect transformation.... Brilliant....

Happy to see the armature and worm gear still available. I always end up with critical parts shortages.

I love these restoration videos. So engrossing with the sound off, I can binge watch for hours. Thank you for making these excellent videos.

@RestorationVS

11 ай бұрын

Thanks for watching my video 🙏🏻❤️❤️

Excellent restoration! - One thing to remember and not shown is "Alignment" of the tool. Making sure the angle stops are set to true vertical 90°, Miter center 90° and 45° either side. Also, the back fence must be aligned 90° to the blade. Otherwise your tool will build in progressive errors in your woodworking project.

People saying about the lack of a guard,yes fair comment. But back in the late 60s I worked at a a factory that produced 75% of the entire worlds Diesel engine components,yes in the UK. The machinery that they used at that time would not be acceptable in modern times. It was dangerous. But apart from the odd problem here and there we got on with the job. I’m pretty sure if this guy can rebuild that mitre saw,he will take care of his fingers. Great restoration,lovely workmanship.

I really enjoyed the restoration of the mitre saw. I couldn't pull it off but you did a great job. Thanks for sharing.

@RestorationVS

5 ай бұрын

Thank you for watching this video ❤️🙏🏻

Beautifully done...can't even imagine the number of hours you had into that project

@RestorationVS

Жыл бұрын

Thanks ❤️❤️

@chrisatkins7959

11 ай бұрын

34 minutes 53 seconds. He is fast lol.

I wanted to see how you fixed the transparent broken guard.

@justomedel6633

8 ай бұрын

Pura mula

Awesome and brilliant restoration. Almost out of factory product. Many many congratulations.

@RestorationVS

Жыл бұрын

Thank ❤️

Отличная работа!

Not having any heavy tools like the other channels, yet producing a better result is beyond amazing 10/10

@RestorationVS

6 ай бұрын

Thanks 🙏🏻😊

👏👍👏👍👏👍👏 serviço maravilhoso ☺️😘☺️😘

As far as I could see, it just needed a clean and the guard fixing. You cleaned it - nice job.

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️

I give you an A+ for the restoration and the editing. Resurrecting a tool from the dead and editing not boring or repetitive. Subscribed.

@RestorationVS

9 ай бұрын

Thanks for liking my video 🙏🏻❤️

@user-jw4vz9kf1g

6 ай бұрын

Seems like a lot of work for something u can go buy new for about $100 bucks

@OswaldOstfalen

6 ай бұрын

​@@user-jw4vz9kf1g And that is exactly the problem of our times..

How do you make those amazing stickers?! Perfect touch to the saw. Looked better than factory. What printer and sheets do you use?

Eine gute Arbeit von einem guten Mann!👍👍 Viele Grüße aus Deutschland 🔧

@RestorationVS

10 ай бұрын

Vielen Dank, dass Ihnen dieses Video gefällt und Sie es angeschaut haben​​ 😊

Beautiful!

@RestorationVS

18 күн бұрын

Thank you 🥰

Great restoration. Probably misunderstanding something but the blade guard does not seem to be nearly big enough!

@shadyone6620

10 ай бұрын

On the "before" shots you can see bigger plastic cover that was on the metal blade guard. Seems like he didn't found replacement.

Nice restoration. Do you plan to add the sawblade guard again? I just get goosebumps watching the 'naked' blade go round when it's in the up position. Otherwise well done 🙂

@nacekozo

Жыл бұрын

I was going to say the same!

@markos6828

9 ай бұрын

Same as that!!

Showed this to a buddy of mine and he reminded me that this is how all of our workshop looked like after a sandstorm in Egypt when we were with the UN Emergency Force (UNEF II) in 1977

I like that this was done with relatively basic tools! No 3D printer or laser etcher, lots of ingenuity and elbow grease. It didn't seem fake to me (I admit I am no expert) the amount of grease and rust seemed realistic. I'm sure there were things omitted, but I enjoyed it!

@RestorationVS

18 күн бұрын

Thanks for watching my video 🙏🏻❤️

Incredible and awesome. Few could EVER do as half as you have. Thank for sharing a Gem to us.

@RestorationVS

Жыл бұрын

Thanks 🙏

All of these restoration videos look like the items get dunked in the same mud hole.

@matthiku

Жыл бұрын

Well observed! Sadly, it's part of the show nowadays in order to get more hits!

@doodlecaboodle9298

Жыл бұрын

Yyyyup

@creambeast8178

Жыл бұрын

It's not impossible tho

@ClA50

11 ай бұрын

Yep and left there for some time to get some surface rust lol.

@tessareeve6205

11 ай бұрын

They could also be recoveries from tsunamis

It is useable now! Good Restore!

@RestorationVS

9 ай бұрын

Thanks 🙏

I liked your video. Nice restoration as brand new machine. Thanks for sharing.

@RestorationVS

9 ай бұрын

Thank you too 🙏🏻❤️

One hell of a great restoration Bro. You just keep up the great work you are doing.👏🏻👌👌👌

awesome restoration..be careful with the missing blade gaurd

Please: DO TAKE A BOW!!! You've done a SUPERB job!!! Thank You so much for this video!!! MAY THE GOOD LORD BLESS YOU ALWAYS!!! 🛐🛐🛐🙏🙏

Outstanding!!!

Wow! Fantastic restoration! I kept thinking how my Dad would have loved to meet you. He loved fixing old tools and did a bit of imaginative repurposing of some. Thanks for the video and the reminder of my Dad.😊

@RestorationVS

Жыл бұрын

Thanks for liking my video 🙏❤️

Trabalho lindo parabéns 👏👏👏👏💯👍👍🇧🇷

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️ 🇧🇷❤️

Estupendo trabajo. espectacular. Felicidades.

MAn you aren an expert, nice meeting you !!👍

Write subscribe in the dirt while you’re cleaning up people will love it. Love from America brother!!

Very fine work, I would be proud to own a tool rebuilt by you. Your family must be well taken care of an extremely proud of your skills.

@RestorationVS

Жыл бұрын

Thank you very much 🙏🏻❤️

Looks great, however you have replaced the original negative rake blade with a positive rake blade. You should really only use negative rake blades on chop saws as a positive rake can pull the wood up off the deck and result in a jam or worse. Positive rake blades are for table saws and circular saws.

Ha sido el video mas gratificante que he visto en mucho tiempo. Hermoso trabajo!!!

@RestorationVS

9 ай бұрын

Thanks 🙏 🥰

I love it, tear down and muck ooooh. Best part of any job for me is getting the grime and grease cleaned up after the tear down. Also excellent restoration through out.

@RestorationVS

Жыл бұрын

Thanks for watching my video 🙏🏻❤️

Хорош , красиво восстановил !

Wonderful, wonderful restoration! Well done to you sir! Oh and, you restored a mitre saw from my home country, Malaysia! 😁

@RestorationVS

Жыл бұрын

Thanks for liking my video 🙏❤️

Lovely,job,and those decals were incredible.

I fix tools. I have for decades. I am very impressed.

@RestorationVS

Жыл бұрын

Thanks ❤️

Amazing work! I'm sure it took many many hours to do this. Incredible! 👍🏻

@RestorationVS

Жыл бұрын

Thanks for watching my video

A great deal of skill and knowledge, and the video itself is near to perfection! Excellent job, sir! New subscriber!

@RestorationVS

Жыл бұрын

Thanks and welcome 🙏🏻❤️

@t3chninja_official

Жыл бұрын

That's a fake account if I've ever seen one.

@breadmenv

Жыл бұрын

@@t3chninja_official exactly, no one in their right mind would pay any amount of money for that turd of a saw. Even someone who could “restore” it.

ficou ótima você esta de parabéns

@ReedThomas71

Жыл бұрын

that’s not a restoration video, that’s a give it a deep cleaning video. Restoring something is totally different. How many screws and bolts did you have over? Where is the clear plastic blade guard that goes on the mitre saw? Pretty shitty restoration video, the only thing you made was the stickers that went on it. At least we know you can clean an item, I know where to go if I want my saw deep cleaned.

اصلاح محترف جداً Very professional repair. 🌹 🌹 🌹 🌹

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️

nice restoration, but omitting the plexiglass safety precautions is an absolute no go...

You forgot to replace part of the blade guard during the rebuild. As it is at the present time there is no protection to prevent serious injury if your hand comes anywhere near the blade while is still spinning down. It would also be nice if this model had a blade brake when you release the trigger.

@Smeetheking

Жыл бұрын

I have seen someone cut half their hand off because they decided to remove the guard. I hope if this saw is being used that it gets a proper guard replacement.

Great restoration buddy, just seeing how many different parts on that miter saw, then putting it back together gave me a headache Thank you

@kevingoligher3393

3 ай бұрын

Hence the video

Absolute masterpiece

Nice pace on your video, not too fast, not too slow. Also, I'm very intrigued by the background sounds! And, of course, outstanding work.

@RestorationVS

Жыл бұрын

Thanks for liking my video

Excellent restoration, it's 10 out of 10 from me. I'd be able to take it apart but putting it back together-no chance. Keep up the good work.

Your very talented, interesting to watch. Keep em coming.

@RestorationVS

4 ай бұрын

Thank you very much 🙏🏻❤️

Excellent restoration of the miter saw

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️

Покажите хоть раз первую часть видео, ну где Вы берете нормальную рабочую пилу и доводите её до состояния в котором она на начале этого видео. 🤣

@GoodWin629

3 ай бұрын

да нуу, наверное опять в кустах нашли, или на дереве XD

I came to the decision during the disassembly that this is a project I would probably never want to take on myself 😂 Great work sir, as always. It's a great pleasure to watch your videos!

Very enjoyable to watch this restoration of the saw. Granny 90

@RestorationVS

9 ай бұрын

Thanks for liking my video 😊❤️

I would have NO clue how to put all of ut back togethor again after pulling it out 😭 your so smart and have awesome skill and awesome videos, thank you for posting these videos!

You missed putting the clear plastic guard back on to stop any user from touching the spinning blade as the saw rises up, probably one of the most important safety guards!

@ambsquared

Жыл бұрын

My thought too. Great for losing fingers or more. Why even put the guard mechanism back on if not using the guard itself.

@esorth

Жыл бұрын

Looks like the original guard was pretty broken. But I would not personally be willing to run the saw with a blade installed without getting and installing a replacement guard.

@richardcasey7521

Жыл бұрын

I didn’t see him grease the drive gears. Should he have or maybe it wasn’t video’d.

@rsharahme3418

Жыл бұрын

That was broken and new was not available.

@ChazzC

Жыл бұрын

@@richardcasey7521 29:46 - 29:52

Pleasantly surprised... it's difficult to watch restoration after my mechanics.. that guy is amazing... but excellent job bro..

@RestorationVS

Жыл бұрын

Thanks :)

Well done!!! Amazing job, perfect!!!

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️

Never thought that would ever work again. Amazing.

@RestorationVS

Жыл бұрын

Thanks 🙏🏻❤️

I liked your video but you need to do something about the screeching background sounds :)

@tingle2958

Жыл бұрын

Homie is working within his means. I think the background noise gives it character :)

@craigdonnell-sb3qp

Жыл бұрын

Turn the volume down if it bothers you so much

@dinoschiesaro2549

Жыл бұрын

​@@craigdonnell-sb3qp in

Please order the plastic guard and install it.

The only thing more miraculous than the job you did cleaning that saw up, was you putting it back together.

Power full nice work thanks

@RestorationVS

7 ай бұрын

Thank you too 🙏🏻❤️

Trabalho perfeito. Parece até que saiu da loja hoje.😊

All is fine except the protective blade clear plastic, you should have made a new one, this is soooo dangerous

I have a brand new saw and I am jealous! Lol. You did a great job, simply beautiful...

Watching from boracay 🥰🥰🥰

Wow! Really nice work! However, because you left off the clear plastic blade guard, using this tool without that guard is now incredibly dangerous. You need to make a new clear plastic blade guard before using this tool. I’ve taken verbatim testimony from far too many people who cut off their fingers because they removed that clear plastic blade guard because they thought it was a hindrance or unnecessary, and nothing could be further from the truth. Keep up the good work! And make a new blade guard!

You lacked the disc protector, otherwise excellent.

@jasdog71

Жыл бұрын

Good job, but agree the disc protector is necessary, not to protect the blade but to protect the user from the blade!

I’m great at the taking apart. It’s the putting back together that throws me.

@RestorationVS

18 күн бұрын

Thanks 🥰

muy buen trabaj0 graciasx compartir bendiciones maestro

@RestorationVS

Жыл бұрын

Thanks for watching my video

No safety guard to speak of, rather dangerous device! 😎

C'est formidable mais c'est dommage de ne pas avoir pu réparer la protection en plastique qui était cassée mais aurait pu être restaurée au minimum pour assurer la protection de la lame de cet appareil qui sans cela est extrêmement dangereux.

Very very wonderful👍✌️👏👏👏👏❤

@RestorationVS

18 күн бұрын

Thank you 🙏 🥰

It always amazes me how these guys know exactly where all the nuts, bolts and screws came from. They must have a photographic memory. Nice work BTW.

@carmium

9 ай бұрын

That or they'v fixed so many things it just seems "obvious"!

@irtheLeGiOn

9 ай бұрын

They are recording it.

@mykstreja8648

9 ай бұрын

More like videographic memory -- as in the SD cards in his camera. Plus, he's probably using a compartmented container, like a tackle box or an egg carton to keep the little parts sorted out.

@seadog158

5 ай бұрын

Wouldn’t it be great if someone filmed it all for him?

I'm probably wrong. I honestly know very little about the electric service in countries outside of the USA. But. To me, it looked like the original plug was for a 110v service, and the final was for a 220v service? Where am I wrong? Someone please educate me. Thank you.

@windmillacres679

Жыл бұрын

@phi katho I understand that. I am fairly sure the final plug used 220v. But doesn't the first plug look like a US 110v ac plug?

That should've been free, not $10.

Very good work! Not many people have the ability and patience for a project like that. Easier to throw it in the garbage and go buy a new one. I enjoy working on projects like that. Take care and enjoy life. Hello from Matagorda,Texas USA

@RestorationVS

Жыл бұрын

Thanks for liking my video and watching 🙏❤️

excelente restauración los felicito

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️

As others have said, the plastic guard was missing in the final restoration. I was watching the final cutting demos and your fingers were very close to a spinning blade, especially the diagonal cuts. You really need the guard otherwise it is a very dangerous machine. You can probably get new guards from the manufacturer wholesalers as they do often get broken. Don't use (or let anyone else use) it without one.

God Bless You....Great way to hide from your wife!!

Excellent stuff! Who would have thought it possible. What a transformation!

Excelente video parabéns 👏👏👏

@RestorationVS

Жыл бұрын

Thanks 🙏 ❤️

Buys garage sale miter saw, dunks it in mud water, pretends to restore it. Cool.

@jasonbubb1275

Ай бұрын

The gears were toast. And the blade was locked up. I'd say thats a restoration.

Fake restoration.👎

@rtralph1269

Жыл бұрын

Fake? Watch the whole video, doofus.

Excelente trabajo, felicitaciones!!!!

@RestorationVS

8 ай бұрын

Thanks 🙏 ❤️

.. si no lo veo, no lo creo. Felicidades. Saludos desde Barcelona Catalonia

Fake restoration.

@rtralph1269

Жыл бұрын

Fake? Don't you know how long it takes to restore that masterpiece?

@Odessa-2maya-2014

Жыл бұрын

Испортили пилу новую. Изверги

@derekadams729

Жыл бұрын

You saw the whole process. How can it be fake. Nice Restoration my friend.

@patrickperry6945

Жыл бұрын

I get that vibe too. I can’t imagine someone allowing their tool to get in that bad condition unintentionally.

@AJediSurvivor

Жыл бұрын

So do a better restoration then if you think you can do one. Probably can’t

Excelente trabajo de restauración.

@RestorationVS

10 ай бұрын

Thanks 🙏🏻❤️

Very very nice brother .. ❤❤❤

@RestorationVS

7 ай бұрын

Thank you so much ❤️🙏🏻

Outstanding work !

@RestorationVS

Жыл бұрын

Thank you 🙏