I love seeing these consoles get another chance at life. It warms my heart

@Jack-ny4vu

2 жыл бұрын

@Roblox Gaming10 I see what u mean lol

@AMII.YT_KREW

2 жыл бұрын

same lol

@Spyder7051

2 жыл бұрын

Finally a person who follows the same emotions as me, I feel you 100% bro you always give an xbox a chance at life, old or first on or not.

@Jack-ny4vu

2 жыл бұрын

@@Spyder7051 don’t worry I’ve brought my falcon back to life. I am a healer. Just hearing the soft whirring of the fans gave me an instant dopamine rush.

@user-uc7hr9pd5j

2 жыл бұрын

@@AMII.YT_KREW かけけけ

The part where you fixed the cracked case was outstanding work. Great job.

@resEG

2 жыл бұрын

that's very nice of you, thanks for watching and the nice comment.

@CoroaEntertainment

Жыл бұрын

23:31 Look closely, it cracked again.

@funkyfurry1405

Жыл бұрын

@@CoroaEntertainment cmon let people be happy

@Theweatherchannelfam12

Жыл бұрын

@@resEG how did you get that from

@thedrbat9572

Жыл бұрын

@@CoroaEntertainment yea he hides it from the camera after that

Simply amazing video! You made me think of all the old technology I threw away that could've been saved with simple tricks. Thank you for your work!

Just a tip, never spread your thermal paste out like that. If this Xbox is actually used it will almost for sure overheat due to doing that none the less still great you got it working

@5starr-dj819

2 жыл бұрын

He did that or are you talking about the person he got it from

@XianMMD

2 жыл бұрын

@@5starr-dj819 probably the guy from video

@Envisaged0ne

2 жыл бұрын

I was thinking the same thing when I watched it. He put to much thermal paste on, and he didn't need to spread it out like that

@davec817

2 жыл бұрын

it will fail again cause he just reballed it, too little thermal paste is worse than too much. The pressure of the mounting evens it out and just wastes the rest not making contact with the ihs and the heatsink, too little and u get gaps where thermal paste could be sat instead, the 360s problem was the heat from its components caused the board to flex and crack the pads/balls on the chip or board

@matthewmay276

11 ай бұрын

Zero in my mind to the fact you were

You did not install the CPU heat sink incorrectly. Compare 6:59 with 15:30 in the video and you will see the issue. It won't cool correctly with the heat sink 90 degrees off.

@MaLilBunny

8 ай бұрын

Such a noob hahah i seen that too .... hahahaha

@1990muthafukin1

6 ай бұрын

This comment is 100% correct. Hope people don't use this video as a tutorial for the red ring fix

@Josh-Barnett

6 ай бұрын

Oh my!

@TheRadmin1724

5 күн бұрын

Okay I'll make sure I install the CPU heatsink incorrectly.

I was really amazed on how you restored the xbox 360 casing. Didn't regret subscribing to your channel!

@resEG

2 жыл бұрын

I so appreciate you saying that - that was so sweet of you! thanks for watching

@MonkeyManCreations

2 ай бұрын

Good job dude

Awesome restoration and incredible transformation, the early xbox 360 was a great if troublesome. I loved mine. ❤

Brutal me encanto la restauración y más con el reto al tener una de las partes tan partida. Brutal espero que sigas así cada vez trayendo nuevos retos, es un deleite ver un video así. 💪🏼👍🏻👌🏻

@resEG

2 жыл бұрын

Me alegro de ver tu comentario, eso es muy amable de tu parte, gracias por mirar y el lindo comentario.

@espia_incognito9197

2 жыл бұрын

Hola vengo 3 semanas despues a decir que la parte donde pones los discos estaba con una cinta plateada y que al final no pusiste no se para que servia (seguramente para nada) pero que falto falto

@mithres4760

2 жыл бұрын

yo hice lo mismo con la mia, pero volvieron a aparecer las luces de la muerte una semana despues

@saulzavala2535

2 жыл бұрын

@@mithres4760 De pende de cualsea pero suerte 🤗🤗

@kevindavilab

2 жыл бұрын

@@espia_incognito9197 Esa cinta plateada es para la garantía, si esa cinta estaba manipulada ya la consola no tenia garantía

Great work!You did a good job on fixing the ring of death!You are a true life console saviour!👍👍👍

@richararredondo5393

Жыл бұрын

😂😁

@Josh-Barnett

6 ай бұрын

He didn't even fix it. It's just a bandaid fix and I can guarantee it's broken again

Very good job, That case clean up came out fantastic...subbed!

The part where you fixed the case was amazing. Congrats for great job

I'm super happy for you that you managed to fix the rrod, but what you did is only a temporary fix. Only real way is to replace the solder balls under the cpu/gpu with lead solder

@resEG

2 жыл бұрын

thanks for watching

@garyhaas9575

2 жыл бұрын

Not true , lead free is better

@Se7en20082008

2 жыл бұрын

@@garyhaas9575 Erm, no its actually nothing to do with the solder what causes the problem with these consoles, its to do with the clamps and the fact the main board is under large amounts of heat, cooling, heat, cooling cycles add the tension of the x-clamps, this causes micro fractures and separation in the solder balls present on the BGA, hence the RROD. Its just a shit design from M$. And that's NOT a reflow, all you did was heat the chip in a vain hope you reflowed it lol. Its similar to baking a GFX card

@EvilTurkeySlices

2 жыл бұрын

@@garyhaas9575 Lead Free is one of the reasons it happened in the first place.

@reidcircuits826

2 жыл бұрын

Replacing solder balls is temporary fix too.

ainda quero comprar um desses tive muitos bons momentos cara seu trabalho e muito foda parabéns pelo cuidado e carinho que vc tem com cada componente dessas obras primas 👏👏👏👏👏

@brunobga9148

2 жыл бұрын

eu tenho um jasper ultimo modelo do fat e muito bom quando peguei ele tava com problema na gaveta que não abria substitui a correia e fiz a troca da pasta termica está funcionando firme e forte

@Opelvectra1

2 жыл бұрын

Translate it to English...

@Spyder7051

2 жыл бұрын

Mhm….language….

@elianaferreira4748

2 жыл бұрын

Oi

@elianaferreira4748

2 жыл бұрын

Você pode aruma o eu coutrole

凄い割れまで補修し ヒートシンクの辺りも清掃して 完璧ですね☆

These kind of videos (I've recently learned) makes me very happy. Great stuff man!

@resEG

3 ай бұрын

Glad you enjoy it!

Nice video, but I noticed something: you mounted one of the two cooler wrong, rotated of 90 degree, the air will not pass through it

@GabrielFrik

2 жыл бұрын

He said he realized when he was making the video and did fix the problem afterwards in Spanish a few comments below

Resultado perfeito, melhor só novo 👏👏

@resEG

2 жыл бұрын

Agradeço muito por você ter dito isso - foi tão gentil da sua parte! obrigado por assistir

@Thiagomkzx

2 жыл бұрын

Ele montou o dissipador da GPU errado causando problemas no fluxo de e causando aquecimento, fora que fez.reflow, onde o correto seria reballing

@angeleldonvergas6853

2 жыл бұрын

Xd

I recently repaired one of these, and I swear, I never want to take one apart again in my life! All those plastic clips were an absolute nightmare! It works, but the clips have gone for a Burton lol.

@chanyphilly8266

4 ай бұрын

@@wannurazalina8607 why?

I'm glad you didn't spray paint the exterior of the console you restored it the right way good job

Trabalhando excelente! Parabéns. 👏👏👏👏

Es tan satisfactorio ver este tipo de videos no solo veo por ver si no también aprendo Gracias!

@resEG

2 жыл бұрын

¡Gracias! ¡Me alegra que lo hayas disfrutado! ❤️

Yep, just another piece of art! Great work!

You have really improved the quality of your videos a lot lately. by the way, I recommend that you use a paint brush instead of a toothbrush for the peroxide cream, it distributes better and is much easier to handle.

@resEG

2 жыл бұрын

thanks for the advice, I will use the paintbrush the next time, thanks for watching and the nice comment.

@turji

2 жыл бұрын

What cream is he using??

@outogetyougotyou5250

2 жыл бұрын

@@turji PEROXIDE. Could just be hair bleach and personally it's more a paste than a cream but semantics.

@nykrev

2 жыл бұрын

@@turji gamer juice

@jameswaller50

2 жыл бұрын

@@nykrev I'm pretty sure that's what he's trying to remove.

It sad seeing the consoles so broken. Thank you for fixing it, it makes me feel better

@allanbejarano9075

8 ай бұрын

sorry for being a dick-tease, but it was a temporary fix not a permanent

So glad to find your channel! Great content! Do you have plan to restore an old record player with broken dials and sliders? Would love to see that

10 minutes later it is broke again

@user-bn2br3bo1l

8 күн бұрын

🤣🤣………😐

I love this video and you did a good job working on the xbox.

Gracias a ti pude arreglar mi xbox no sabia como mis padres no me ayudaron pero tu fuiste mi salvación

Nunca me dejaran de gustar estos videos tuyos, son muy entretenidos. Jugadores de Xbox después de ver cómo reparar la causa de la muerte de sus Xbox 360 y volver a jugar: Eres tan hermosa como el día que te fuiste

Great job, but the problem probably comes back in a few days.

@ricardoricardo3232

2 жыл бұрын

That's why Xbox 360 emulation is a must. plus I had a white one that got the red ring of death every now and then. All I did was beat the living crap out of it. I hit the top of it and it eventually went away. Rinse and repeat for 6 years. Eventually I tried to paint it, it went bad. Left it outside one day and someone stole it. That thing was a tank! Beat it up every other day.

@quakemarine20

2 жыл бұрын

I had a repaired Jtag unit back in the day and it lasted only a few months after being purchased..... The 360 got hot enough to suffer from chip creep. I'd imagine to properly restore a 360 long term you'd have to upgrade the cooling in some meaningful way over stock. Liquid metal would really be the easiest solution.

Nice video, but check the min 15: You're putting bad the heatsink! You must rotate it 90º, check with the video at min 6:40. In that position (min 15) you're blocking the air flow

I remember how hyped I was when I first time playing Lost Odyssey on this console

It's very strange that nobody mentions the thermal paste used in the video. Gd-900 is very liquidy paste which should not be used on bare die situations. Instead use PK-3, IC diamond Carat or a cheap solution would be Dow Corning TC-5688 which was specifically designed for bare die applications such as laptops and consoles.

Nice work! 🙂 Do you keep these consoles after or re-sell them? Also, I wonder if that small chip that came out at the start there was the corner from that cracked piece of the casing? But all in all, an amazing restoration!

In my opinion one of the most easy consoles there is to take apart!! 2009 Arcade Model Was is the best!! I still have mine and it works perfectly!

@resEG

2 жыл бұрын

thanks for watching

I can't imagine the time it takes you to do these repairs with having to adjust every camera angle to every little step.. cudos!

that is a LOT of thermal compound you applied good lord.

Show demais, muito bom ficou o 360 esse modelo é fantástico. 👍😀

I just took off the front of my 360, it was cool. Awesome video!

I'm so glad I still have my Xbox 360, which still works. Same with my Xbox that has the clear casing.

This is ASMR. Actual repair begins right before 10 minutes for those that were recommended this video expecting someone to explain what they're doing

This man’s a legend for fixing the red ring of death

@resEG

Жыл бұрын

Oh, that's very nice of you, thanks for watching and the nice comment.❤️

@Josh-Barnett

6 ай бұрын

​@resEG you didn't even fix it. Just a bandaid fix

Ficou ótimo!

incrível !! Great, good job

Top demais excelente trabalho de restauração 😍👏👏👏

@VF_PEEP

Жыл бұрын

Sim mn

You should have re-balled the cpu, not re-flowed the cpu. That system will die in a couple days up to a weeks time!

@skittl9454

2 жыл бұрын

Shut up. Be glad it had even 1 minute of life

@BenderBendingRodriguezOFFICIAL

2 жыл бұрын

@@skittl9454 No bruh, only a psychopath would bake innocent parts like that. Ask Louis Rossman about it.

@skittl9454

2 жыл бұрын

@@BenderBendingRodriguezOFFICIAL €: ^ |

@TSyoyo

2 жыл бұрын

Reflowed mine years ago and its still going strong.. its a launch unit at well lol.

@Sebastian0440

2 жыл бұрын

@@skittl9454 thats 2 words I like telling black people "Shut up"

So nice to see a game system getting restored to glory. So many game stores would be so quick to trash broken systems because the restorations just aren’t profitable.

Ficou muito legal seu vídeo restaurando o Xbox sucesso pra vc

5:00 судя по повреждению её пытались починить Советским способом

@user-kc8bs5cp8f

2 жыл бұрын

У нас так телик любят чинить

красота) мужик у тебя золотые руки!!!

@resEG

2 жыл бұрын

Большое-большое спасибо, рад, что вам понравилось! ❤️

Amazing work!

@resEG

2 жыл бұрын

Thanks for watching

Great video. Always admired this kind of work. How do you bleach plastic?

You’re not suppose to spread the paste. As you put the heat sink on the pressure will spread it out evenly

@wikoy8023

7 ай бұрын

Poi ha veramente senso aggiustare in modo provvisorio una 360 oggi?? Forse giusto x fare un video da milioni di visualizzazioni..Si trovano delle Xbox One funzionanti con accessori e Giochi a pochissimo ornai ... 😅

Excelente trabajo de restauración solo hubo un pequeño detalle que no quedo bien y fue el disipador de la CPU las rejillas quedaron hacia un lado y eso a la larga va a crear problemas! Pues no va a permitir bien el flujo de aire sobre el disipador y va a calentarse más... pero en general buen trabajo!

@pepsico1459

Жыл бұрын

Así es, y de paso podría hacerle un reballing para q dure mas la consola…

Ficou top demais slk

Proper good job mate!

Great 👍👌 work Xbox 360

@resEG

2 жыл бұрын

thanks for watching

When applying thermal paiste , put a thin line at one end then spread with a credit card or something similar

@marchey304

2 жыл бұрын

homie drowned it in thermal paste lmao

@Villa_Sempre

2 жыл бұрын

No need to spread at all, it's only going to increase the risk of creating air bubbles. The heatsink will spread the thermal paste evenly when you attach it to the board.

@garyhaas9575

2 жыл бұрын

@@Villa_Sempre that's why you spread it evenly with a card , no air bubbles

@garyhaas9575

2 жыл бұрын

@@Villa_Sempre just to let you know , I fix these

@juansalas2882

2 жыл бұрын

@@garyhaas9575 just because you have been doing something wrong for many years doesn't make you good at it, it only makes you good at doing it wrong

فيديو ممتع جدا يبعث على النفس الرحة ممتاز جدا عمل رائع

Awesome video mate! Did you reuse the thermal pads or did you apply new ones?

Am I the only one that noticed that he put the CPU heatsink back on at a different angle?

@Villa_Sempre

2 жыл бұрын

Yup, that heatsink isn't going to cool properly.

@ernestolujan734

2 жыл бұрын

I use to mod this kind of devices (Jtag / RGH) the way he did this maybe less then month if played daily. Honestly for this kind of repair if he wanted to do just a reflow using proper equipment like a BGA station would of been perfect all the heat gun does it throw hot air at the chip causing the board to warp because the whole board ain’t being heat up at same time. But again it’s just for a video so I’m guessing he might thrash it after or sell for parts.

@cameronabernathy4675

2 жыл бұрын

Ikr

13:14 El disipador no va en esa posición!!

@resEG

2 жыл бұрын

Desafortunadamente, no instalé el disipador de calor de la CPU correctamente, me di cuenta de este error más tarde, después de terminar el video, así que lo corrigí después del video. gracias por ver

@hugoenrrique4727

2 жыл бұрын

Creo que eso explica porque los ventiladores del disipador parecen turbinas de avión 🤔 , el pobre cpu debió de estar en las brasas del infierno 😳

@hugoenrrique4727

2 жыл бұрын

Aun así buen video 👍

@X-BAIO

2 жыл бұрын

Eso podria explicar por que la xbox sonaba como turbina de avión?

@pleasegetthefuckaway

2 жыл бұрын

@@X-BAIO почисти xbox от пыли

Always satisfying 😌

@resEG

2 жыл бұрын

thank you for watching

@WildPotaot2

2 жыл бұрын

@@resEG :)

Bom trabalho ajudou muito!!

Это временно на пару суток игры потом опять три огня , задние крепления звёздочки слабые при нагреве и они ослабляют при этом проц перегриваеваеться и показывает ошибку, на своём вкручивал болты с шайбами и все было гуууд.

@resEG

2 жыл бұрын

Спасибо за просмотр

@IamLoveEBOLA

2 жыл бұрын

Согласен, тут не реболл нужен,а замена GPU

@leeeeeee2796

2 жыл бұрын

@@IamLoveEBOLA это даже не реболл, а простое пропекание. Сами чипы нормальные, иначе бы не запустилось вовсе

@user-mr1fk7tn5h

2 жыл бұрын

@@leeeeeee2796 он ведь не только по гп и процу поводил, но и по памяти. Зачем? После этого он не должен работать

Класс 👍👍👍👍👍👍👍👍👍

@resEG

2 жыл бұрын

thank you for watching

@CasperMax595

2 жыл бұрын

Не на долго восстановление. Чип не перекатан а просто прогрет. У меня после прогрева проработал 2 недели

This is weirdly satisfying. I have no idea why KZread wants me here, but I'm not mad at it

@resEG

2 жыл бұрын

thanks for watching

Great job🔧

nie sądziłem że jeszcze w tym roku ktoś naprawia xboxy 360, jeju tamte czasy grania na tej konsoli były cudowne

@resEG

2 жыл бұрын

Dzięki za oglądanie

@richararredondo5393

Жыл бұрын

😝

와 알고리즘!

Glad that u used the original casing and glued it back together, it would’ve been too easy just replacing it

I really do like the design of the fat models. I have a mw2 edition. But I also have a slim 360. The fat has a jasper motherboard and I heard they were better at not red ringing but don't wanna take any chances.

При чем здесь ремонт? Прогретые чипы все равно отвалятся.

@resEG

2 жыл бұрын

Спасибо за просмотр

@TonyTusk

2 жыл бұрын

я просто немного не понял, проблема именно в отвале была? из за этого красное кольцо было? И мне кажется, термухи много навалил

what did you use to clean the outside of the device, and remove the yellow?

Você tem muito talento

С учётом того, что ты не поставил термпрокладки на память проживёт она не долго.... В чём заключается твой ремонт ? Ты просто почистил мать, куллера и радиаторы от пыли( не более) А ну и прогрел два чипа, не понятно зачем .... Короче сомнительный ремонт, проживёт не долго)

@Dyliams

2 жыл бұрын

Ещё мне показалось, что корпус тупо новый поставил, т.к я и не увидел результат после того как он крышку склеил. Просто зачистил наждачкой и ультрафиолетом просветил, а куда шов делся?

@lara-mz7rm

2 жыл бұрын

да все нормально, 360 бокс давно уже нежитью стал, второй раз не умрет

@lara-mz7rm

2 жыл бұрын

а с такими толстыми прокладками много тепла не отведешь, что есть что нету

@user-zt8hf2ni7o

2 жыл бұрын

А никого не смутило, как он поставил радиатор на процессор? Повернул на девяносто градусов, и теперь он не будет продуваться, так что, работать ему дай бог пару дней

Dude your awesome I gotta have you repair my Xbox 360 😅

Very good work 👍

Me relaja este tipo de videos 😌😶

Just Amazing.

I love it.

Muy genial el video.

Bist der erste, den ich sehe, der die Klammern unter dem Mainboard wieder dran macht, habe die früher direkt weggeschmissen.

Great job/work the belt usually goes on the disc drive would of replaced that greased the gears and cleaned the laser for a full restoration interesting technique on the cracked cover shell was that a honey comb screen add on??

Qual produto utilizado pra clarear ? Agua oxigenada apenas ?

O que vc usa para tirar o amarelado dos plasticos?

Lo dire una vez mas tus videos me entretienen y son facheros

Man this gave me tears, I haven't played x box 360 in years.(although mine was black.)

*Awesome Video Dear Restoration EG... Super Big Thumbs Up Brother!!!* 😎😁😀💁🏻‍♂️✌👍

Satisfying video 😍

Still to this day the best console ever made

Ah the ol red ring o death. I remember somebody even made a death metal song about it back then.

Я конечно не эксперт, но один из радиаторов в процессе финальной сборке установили наоборот. Получается 2 кулера дуют не промеж рёбер радиатору, а на его боковой торец.

Great video, keep up the good work!👏👏👏

@resEG

2 жыл бұрын

Thanks for watching

@user-ym3pl8cb4d

2 жыл бұрын

@@resEG дьдььдщ8дщщщд

@user-ym3pl8cb4d

2 жыл бұрын

@@resEG 9дд99лд9щддддд9ддддд899д89ьщдщ9щ9щщшьддддщщддь9ьдщщ9щддд9ддддд

@user-ym3pl8cb4d

2 жыл бұрын

@@resEG 9л9ддь9дщьддддд8д8999999д99д99д9дь999ьдддд99ь99щььщддщьддддд9ьдщщ8

@user-ym3pl8cb4d

2 жыл бұрын

здравствуйте д д9зло 9ь

Very nice!

Beautiful

Shit, I wish you were around when I was like 11, and my Xbox got the red ring. All I wanted to do was play CoD MW 3. My little heart was shattered.

@resEG

2 жыл бұрын

I'm sorry for that, thanks for watching

good ASMR relaxation

@resEG

2 жыл бұрын

Thanks for watching

Nice work you fix 3 red light with no rebaling just cleaning the termal paste

@felixlutticken5694

2 жыл бұрын

Unfortunally this fix propably wont last very long, the solder points under the chips will keep cracking if they dont get reballed properly

@reidcircuits826

2 жыл бұрын

@@felixlutticken5694 reballing only fixes for a week.

O.M.G YOU FIXED IT!! NICE WORK but one question can you fix a nintendo switch that got hit by oil and water?