Restless Keel Cooler, Exhaust and Engine Test
Тәжірибелік нұсқаулар және стиль
In this video we finish up the keel cooler, the exhaust and we test fire the engine. The engine is a QSL9 with a relatively low 335HP at 1800 RPM this is a serious workhorse engine for a serious workhorse boat.
Пікірлер: 24
I just found your channel and really like your content! Please keep up the good work, cheers!
@SeaboardMarineIncVideos
3 жыл бұрын
Welcome aboard! Thanks!
That's really good work. Impressive.
@SeaboardMarineIncVideos
2 жыл бұрын
Thank you! Cheers!
Small nut first. Less resistance so you can tighten it in further. Then large to jam small nut on. It’s what I was told when I started building boats and it’s how I’ve done it since and none of them have ever fallen off
@payenbraaap1664
4 жыл бұрын
large nut first wont fall off either
Good mechanics
Is the whole concept to contain engine coolant ? So heat exchange (chamber) is inside body hull keel ? Huh. I'll be dipped! Cool idea.
So "keel cooling" doesn't require a "header tank" and a pressure cap and overflow/recovery tank? Or apparently even COOLANT?
Is that hull a 38 Dixon?
Qual é a potência desse motor? E a marca??
whats diameter pls of prop
How long is that walter keel cooler? 1.5" tubes?
@SeaboardMarineIncVideos
4 жыл бұрын
Its been a while, but I think they were about 10-12 feet long and yes they seemed to be about 1-1/4 or 1-1/2 diameter.
@mpeters5549
4 жыл бұрын
The reason i ask is i have a CPL0970 that i have 4' x 8 tubes @ 1.5" diameter and if i run over 2200 rpm my temp will rise. That is what Walter recommeneded for my 6bta. I think 12' would elimitate that problem. I am set up exactly like in this video.
Eu tenho um barco o nome dele é Adrenalina
nice vidéo...please can you help me to have the OEM harness for qsm11 marine.cant you give your email.i trying to buy the harness and the throttle.the engine is delivered to me with the display only.i need the throttle and the harness.i am in West Africa senegal.the engine come from usa
@SeaboardMarineIncVideos
4 жыл бұрын
Please visit our website for assistance www.sbmar.com
Hmmm, no header tank. ???
@bertieperret
4 жыл бұрын
Steve Carlisle were do they “add” the coolant, and where does it go when it gets hot and expands.....
@stevecarlisle3323
4 жыл бұрын
@@bertieperret 🤔
@SeaboardMarineIncVideos
4 жыл бұрын
The expansion and overflow tanks are in the cabin under a bench seat at an elevation above the engine and all the plumbing, there was no good spot under the deck.
@elzapinheirocaterpillar997
3 жыл бұрын
Caterpillar